The fixes:
- Buffer Split offload is supported/verified on ConnectX-5
- Tx scheduling requires ConnectX-6DX and depends on firmware version
Fixes: cb7b0c24c835 ("doc: update hardware offloads support in mlx5 guide")
Cc: [email protected]
Signed-off-by: Viacheslav Ovsiienko <[email protected]>
---
doc/guides/nics/mlx5.rst | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index e99fea4342..6c8cb71ace 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -1474,7 +1474,8 @@ Supported hardware offloads
Rx timestamp 17.11 4.14 16 4.2-1 12.21.1000 ConnectX-4
TSO 17.11 4.14 16 4.2-1 12.21.1000 ConnectX-4
LRO 19.08 N/A N/A 4.6-4 16.25.6406 ConnectX-5
- Buffer Split 20.11 N/A N/A 5.1-2 22.28.2006 ConnectX-6 Dx
+ Tx scheduling 20.08 N/A N/A 5.1-2 22.28.2006 ConnectX-6 Dx
+ Buffer Split 20.11 N/A N/A 5.1-2 16.28.2006 ConnectX-5
============== ===== ===== ========= ===== ========== =============
.. table:: Minimal SW/HW versions for rte_flow offloads
--
2.18.1
