From: "huawei.xhw" <huawei....@alibaba-inc.com>
With I/O BAR, we get PIO(port-mapped I/O) address.
With MMIO(memory-mapped I/O) BAR, we get mapped virtual address.
We distinguish PIO and MMIO by their address range
like how kernel does, i.e, address below 64K is PIO..
ioread/write8/16/32 is provided to access PIO/MMIO.
By the way, for virtio on arch other than x86, BAR flag indicates PIO but is
mapped.
Signed-off-by: huawei xie <huawei....@alibaba-inc.com>
Reviewed-by: Maxime Coquelin <maxime.coque...@redhat.com>
---
drivers/bus/pci/linux/pci.c | 4 --
drivers/bus/pci/linux/pci_uio.c | 156 +++++++++++++++++++++++++++++-----------
2 files changed, 113 insertions(+), 47 deletions(-)
diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c
index 0f38abf..0dc99e9 100644
--- a/drivers/bus/pci/linux/pci.c
+++ b/drivers/bus/pci/linux/pci.c
@@ -715,8 +715,6 @@ int rte_pci_write_config(const struct rte_pci_device
*device,
break;
#endif
case RTE_PCI_KDRV_IGB_UIO:
- pci_uio_ioport_read(p, data, len, offset);
- break;
case RTE_PCI_KDRV_UIO_GENERIC:
pci_uio_ioport_read(p, data, len, offset);
break;
@@ -736,8 +734,6 @@ int rte_pci_write_config(const struct rte_pci_device
*device,
break;
#endif
case RTE_PCI_KDRV_IGB_UIO:
- pci_uio_ioport_write(p, data, len, offset);
- break;
case RTE_PCI_KDRV_UIO_GENERIC:
pci_uio_ioport_write(p, data, len, offset);
break;
diff --git a/drivers/bus/pci/linux/pci_uio.c b/drivers/bus/pci/linux/pci_uio.c
index 01f2a40..0907051 100644
--- a/drivers/bus/pci/linux/pci_uio.c
+++ b/drivers/bus/pci/linux/pci_uio.c
@@ -368,6 +368,8 @@
return -1;
}
+#define PIO_MAX 0x10000
+
#if defined(RTE_ARCH_X86)
int
pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
@@ -381,12 +383,6 @@
unsigned long base;
int i;
- if (rte_eal_iopl_init() != 0) {
- RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for
PCI device %s\n",
- __func__, dev->name);
- return -1;
- }
-
/* open and read addresses of the corresponding resource in sysfs */
snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT "/resource",
rte_pci_get_sysfs_path(), dev->addr.domain, dev->addr.bus,
@@ -408,15 +404,27 @@
&end_addr, &flags) < 0)
goto error;
- if (!(flags & IORESOURCE_IO)) {
- RTE_LOG(ERR, EAL, "%s(): bar resource other than IO is not
supported\n", __func__);
- goto error;
- }
- base = (unsigned long)phys_addr;
- RTE_LOG(INFO, EAL, "%s(): PIO BAR %08lx detected\n", __func__, base);
+ if (flags & IORESOURCE_IO) {
+ if (rte_eal_iopl_init()) {
+ RTE_LOG(ERR, EAL, "%s(): insufficient ioport
permissions for PCI device %s\n",
+ __func__, dev->name);
+ goto error;
+ }
- if (base > UINT16_MAX)
+ base = (unsigned long)phys_addr;
+ if (base > PIO_MAX) {
+ RTE_LOG(ERR, EAL, "%s(): %08lx too large PIO
resource\n", __func__, base);
+ goto error;
+ }
+
+ RTE_LOG(DEBUG, EAL, "%s(): PIO BAR %08lx detected\n", __func__,
base);
+ } else if (flags & IORESOURCE_MEM) {
+ base = (unsigned long)dev->mem_resource[bar].addr;
+ RTE_LOG(DEBUG, EAL, "%s(): MMIO BAR %08lx detected\n",
__func__, base);
+ } else {
+ RTE_LOG(ERR, EAL, "%s(): unknown BAR type\n", __func__);
goto error;
+ }
/* FIXME only for primary process ? */
if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN) {
@@ -517,6 +525,92 @@
}
#endif
+#if defined(RTE_ARCH_X86)
+static inline uint8_t ioread8(void *addr)
+{
+ uint8_t val;
+
+ val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+ *(volatile uint8_t *)addr :
+ inb_p((unsigned long)addr);
+
+ return val;
+}
+
+static inline uint16_t ioread16(void *addr)
+{
+ uint16_t val;
+
+ val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+ *(volatile uint16_t *)addr :
+ inw_p((unsigned long)addr);
+
+ return val;
+}
+
+static inline uint32_t ioread32(void *addr)
+{
+ uint32_t val;
+
+ val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+ *(volatile uint32_t *)addr :
+ inl_p((unsigned long)addr);
+
+ return val;
+}
+
+static inline void iowrite8(uint8_t val, void *addr)
+{
+ (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+ *(volatile uint8_t *)addr = val :
+ outb_p(val, (unsigned long)addr);
+}
+
+static inline void iowrite16(uint16_t val, void *addr)
+{
+ (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+ *(volatile uint16_t *)addr = val :
+ outw_p(val, (unsigned long)addr);
+}
+
+static inline void iowrite32(uint32_t val, void *addr)
+{
+ (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+ *(volatile uint32_t *)addr = val :
+ outl_p(val, (unsigned long)addr);
+}
+#else
+static inline uint8_t ioread8(void *addr)
+{
+ return *(volatile uint8_t *)addr;
+}
+
+static inline uint16_t ioread16(void *addr)
+{
+ return *(volatile uint16_t *)addr;
+}
+
+static inline uint32_t ioread32(void *addr)
+{
+ return *(volatile uint32_t *)addr;
+}
+
+static inline void iowrite8(uint8_t val, void *addr)
+{
+ *(volatile uint8_t *)addr = val;
+}
+
+static inline void iowrite16(uint16_t val, void *addr)
+{
+ *(volatile uint16_t *)addr = val;
+}
+
+static inline void iowrite32(uint32_t val, void *addr)
+{
+ *(volatile uint32_t *)addr = val;
+}
+#endif
+
void
pci_uio_ioport_read(struct rte_pci_ioport *p,
void *data, size_t len, off_t offset)
@@ -528,25 +622,13 @@
for (d = data; len > 0; d += size, reg += size, len -= size) {
if (len >= 4) {
size = 4;
-#if defined(RTE_ARCH_X86)
- *(uint32_t *)d = inl(reg);
-#else
- *(uint32_t *)d = *(volatile uint32_t *)reg;
-#endif
+ *(uint32_t *)d = ioread32((void *)reg);
} else if (len >= 2) {
size = 2;
-#if defined(RTE_ARCH_X86)
- *(uint16_t *)d = inw(reg);
-#else
- *(uint16_t *)d = *(volatile uint16_t *)reg;
-#endif
+ *(uint16_t *)d = ioread16((void *)reg);
} else {
size = 1;
-#if defined(RTE_ARCH_X86)
- *d = inb(reg);
-#else
- *d = *(volatile uint8_t *)reg;
-#endif
+ *d = ioread8((void *)reg);
}
}
}
@@ -562,25 +644,13 @@
for (s = data; len > 0; s += size, reg += size, len -= size) {
if (len >= 4) {
size = 4;
-#if defined(RTE_ARCH_X86)
- outl_p(*(const uint32_t *)s, reg);
-#else
- *(volatile uint32_t *)reg = *(const uint32_t *)s;
-#endif
+ iowrite32(*(const uint32_t *)s, (void *)reg);
} else if (len >= 2) {
size = 2;
-#if defined(RTE_ARCH_X86)
- outw_p(*(const uint16_t *)s, reg);
-#else
- *(volatile uint16_t *)reg = *(const uint16_t *)s;
-#endif
+ iowrite16(*(const uint16_t *)s, (void *)reg);
} else {
size = 1;
-#if defined(RTE_ARCH_X86)
- outb_p(*s, reg);
-#else
- *(volatile uint8_t *)reg = *s;
-#endif
+ iowrite8(*s, (void *)reg);
}
}
}
--
1.8.3.1
