>-----Original Message-----
>From: Andrew Rybchenko <andrew.rybche...@oktetlabs.ru>
>Sent: Tuesday, March 9, 2021 4:20 PM
>To: Xueming(Steven) Li <xuemi...@nvidia.com>
>Cc: dev@dpdk.org; Slava Ovsiienko <viachesl...@nvidia.com>; Asaf Penso 
><as...@nvidia.com>; NBU-Contact-Thomas Monjalon
><tho...@monjalon.net>; Ferruh Yigit <ferruh.yi...@intel.com>; Ray Kinsella 
><m...@ashroe.eu>; Neil Horman
><nhor...@tuxdriver.com>
>Subject: Re: [PATCH v8 8/9] ethdev: representor iterator compare complete info
>
>On 3/4/21 5:30 PM, Xueming Li wrote:
>> The NIC can have multiple PCIe links and can be attached to multiple
>> hosts, for example the same single NIC can be shared for multiple
>> server units in the rack. On each PCIe link NIC can provide multiple
>> PFs and VFs/SFs based on these ones. The full representor identifier
>> consists of three indices - controller index, PF index, and VF or SF index 
>> (if any).
>>
>> SR-IOV and SubFunction are created on top of PF. PF index is
>> introduced because there might be multiple PFs in the bonding
>> configuration and only bonding device is probed.
>>
>> In eth representor comparator callback, ethdev representor ID was
>> compared with devarg. Since controller index and PF index not
>> compared, callback returned representor from other PF or controller.
>>
>> This patch adds new API to get representor ID from controller, pf and
>> vf/sf index. Representor comparer callback get representor ID then
>> compare with device representor ID.
>>
>> Signed-off-by: Xueming Li <xuemi...@nvidia.com>
>
>Reviewed-by: Andrew Rybchenko <andrew.rybche...@oktetlabs.ru>
>
>One minor suggestions below to make it a bit more robust against errors in 
>PMDs.
>
>Make thanks for careful review notes processing.

Many thanks to your generous and careful review all the time, with patience :)
This is my first long public api patchset, can't do it without your help :)

>
>[snip]
>
>> diff --git a/lib/librte_ethdev/rte_ethdev.c
>> b/lib/librte_ethdev/rte_ethdev.c index 3d4ec8ad5c..2dc464a7ad 100644
>> --- a/lib/librte_ethdev/rte_ethdev.c
>> +++ b/lib/librte_ethdev/rte_ethdev.c
>> @@ -5609,6 +5609,94 @@ rte_eth_devargs_parse(const char *dargs, struct 
>> rte_eth_devargs *eth_da)
>>      return result;
>>  }
>>
>> +int
>> +rte_eth_representor_id_get(const struct rte_eth_dev *ethdev,
>> +                       enum rte_eth_representor_type type,
>> +                       int controller, int pf, int representor_port,
>> +                       uint16_t *repr_id)
>> +{
>> +    int ret, n, i, count;
>> +    struct rte_eth_representor_info *info = NULL;
>> +    size_t size;
>> +
>> +    if (type == RTE_ETH_REPRESENTOR_NONE)
>> +            return 0;
>> +    if (repr_id == NULL)
>> +            return -EINVAL;
>> +
>> +    /* Get PMD representor range info. */
>> +    ret = rte_eth_representor_info_get(ethdev->data->port_id, NULL);
>> +    if (ret < 0) {
>> +            if (type == RTE_ETH_REPRESENTOR_VF && controller == -1 &&
>> +                pf == -1) {
>> +                    /* Direct mapping for legacy VF representor. */
>> +                    *repr_id = representor_port;
>> +                    return 0;
>> +            } else {
>> +                    return ret;
>> +            }
>> +    }
>> +    n = ret;
>> +    size = sizeof(*info) + n * sizeof(info->ranges[0]);
>> +    info = calloc(1, size);
>> +    if (info == NULL)
>> +            return -ENOMEM;
>> +    ret = rte_eth_representor_info_get(ethdev->data->port_id, info);
>> +    if (ret < 0)
>> +            goto out;
>> +
>> +    /* Default controller and pf to caller. */
>> +    if (controller == -1)
>> +            controller = info->controller;
>> +    if (pf == -1)
>> +            pf = info->pf;
>> +
>> +    /* Locate representor ID. */
>> +    ret = -ENOENT;
>> +    for (i = 0; i < n; ++i) {
>> +            if (info->ranges[i].type != type)
>> +                    continue;
>> +            if (info->ranges[i].controller != controller)
>> +                    continue;
>> +            count = info->ranges[i].id_end - info->ranges[i].id_base + 1;
>
>I think it would be useful to sanity test these values to ensure that we have 
>no overflow here.
>Let's check above, log error and skip the range if id_end is smaller than 
>id_base.
>
>> +            switch (info->ranges[i].type) {
>> +            case RTE_ETH_REPRESENTOR_PF:
>> +                    if (pf < info->ranges[i].pf ||
>> +                        pf >= info->ranges[i].pf + count)
>> +                            continue;
>> +                    *repr_id = info->ranges[i].id_base +
>> +                               (pf - info->ranges[i].pf);
>> +                    ret = 0;
>> +                    goto out;
>> +            case RTE_ETH_REPRESENTOR_VF:
>> +                    if (info->ranges[i].pf != pf)
>> +                            continue;
>> +                    if (representor_port < info->ranges[i].vf ||
>> +                        representor_port >= info->ranges[i].vf + count)
>> +                            continue;
>> +                    *repr_id = info->ranges[i].id_base +
>> +                               (representor_port - info->ranges[i].vf);
>> +                    ret = 0;
>> +                    goto out;
>> +            case RTE_ETH_REPRESENTOR_SF:
>> +                    if (info->ranges[i].pf != pf)
>> +                            continue;
>> +                    if (representor_port < info->ranges[i].sf ||
>> +                        representor_port >= info->ranges[i].sf + count)
>> +                            continue;
>> +                    *repr_id = info->ranges[i].id_base +
>> +                          (representor_port - info->ranges[i].sf);
>> +                    ret = 0;
>> +                    goto out;
>> +            default:
>> +                    break;
>> +            }
>> +    }
>> +out:
>> +    free(info);
>> +    return ret;
>> +}
>> +
>>  static int
>>  eth_dev_handle_port_list(const char *cmd __rte_unused,
>>              const char *params __rte_unused,
>
>[snip]

Reply via email to