>> From: Pavan Nikhilesh Bhagavatula <pbhagavat...@marvell.com>
>> Sent: Thursday, March 25, 2021 6:44 PM
>> To: Jayatheerthan, Jay <jay.jayatheert...@intel.com>; Jerin Jacob
>Kollanukkaran <jer...@marvell.com>; Carrillo, Erik G
>> <erik.g.carri...@intel.com>; Gujjar, Abhinandan S
><abhinandan.guj...@intel.com>; McDaniel, Timothy
>> <timothy.mcdan...@intel.com>; hemant.agra...@nxp.com; Van
>Haaren, Harry <harry.van.haa...@intel.com>; mattias.ronnblom
>> <mattias.ronnb...@ericsson.com>; Ma, Liang J
><liang.j...@intel.com>
>> Cc: dev@dpdk.org
>> Subject: RE: [dpdk-dev] [PATCH v5 4/8] eventdev: add Rx adapter
>event vector support
>>
>>
>>
>> >-----Original Message-----
>> >From: Jayatheerthan, Jay <jay.jayatheert...@intel.com>
>> >Sent: Thursday, March 25, 2021 4:07 PM
>> >To: Pavan Nikhilesh Bhagavatula <pbhagavat...@marvell.com>;
>Jerin
>> >Jacob Kollanukkaran <jer...@marvell.com>; Carrillo, Erik G
>> ><erik.g.carri...@intel.com>; Gujjar, Abhinandan S
>> ><abhinandan.guj...@intel.com>; McDaniel, Timothy
>> ><timothy.mcdan...@intel.com>; hemant.agra...@nxp.com; Van
>> >Haaren, Harry <harry.van.haa...@intel.com>; mattias.ronnblom
>> ><mattias.ronnb...@ericsson.com>; Ma, Liang J
>> ><liang.j...@intel.com>
>> >Cc: dev@dpdk.org
>> >Subject: [EXT] RE: [dpdk-dev] [PATCH v5 4/8] eventdev: add Rx
>adapter
>> >event vector support
>> >
>> >External Email
>> >
>> >----------------------------------------------------------------------
>> >> -----Original Message-----
>> >> From: pbhagavat...@marvell.com <pbhagavat...@marvell.com>
>> >> Sent: Wednesday, March 24, 2021 10:35 AM
>> >> To: jer...@marvell.com; Jayatheerthan, Jay
>> ><jay.jayatheert...@intel.com>; Carrillo, Erik G
>> ><erik.g.carri...@intel.com>; Gujjar,
>> >> Abhinandan S <abhinandan.guj...@intel.com>; McDaniel, Timothy
>> ><timothy.mcdan...@intel.com>; hemant.agra...@nxp.com; Van
>> >> Haaren, Harry <harry.van.haa...@intel.com>; mattias.ronnblom
>> ><mattias.ronnb...@ericsson.com>; Ma, Liang J
>> >> <liang.j...@intel.com>
>> >> Cc: dev@dpdk.org; Pavan Nikhilesh <pbhagavat...@marvell.com>
>> >> Subject: [dpdk-dev] [PATCH v5 4/8] eventdev: add Rx adapter
>event
>> >vector support
>> >>
>> >> From: Pavan Nikhilesh <pbhagavat...@marvell.com>
>> >>
>> >> Add event vector support for event eth Rx adapter, the
>> >implementation
>> >> creates vector flows based on port and queue identifier of the
>> >received
>> >> mbufs.
>> >>
>> >> Signed-off-by: Pavan Nikhilesh <pbhagavat...@marvell.com>
>> >> ---
>> >> lib/librte_eventdev/eventdev_pmd.h | 7 +-
>> >> .../rte_event_eth_rx_adapter.c | 257 ++++++++++++++++-
>-
>> >> lib/librte_eventdev/rte_eventdev.c | 6 +-
>> >> 3 files changed, 250 insertions(+), 20 deletions(-)
>> >>
>> >> diff --git a/lib/librte_eventdev/eventdev_pmd.h
>> >b/lib/librte_eventdev/eventdev_pmd.h
>> >> index 9297f1433..0f724ac85 100644
>> >> --- a/lib/librte_eventdev/eventdev_pmd.h
>> >> +++ b/lib/librte_eventdev/eventdev_pmd.h
>> >> @@ -69,9 +69,10 @@ extern "C" {
>> >> } \
>> >> } while (0)
>> >>
>> >> -#define RTE_EVENT_ETH_RX_ADAPTER_SW_CAP \
>> >> -
>> > ((RTE_EVENT_ETH_RX_ADAPTER_CAP_OVERRIDE_FLOW_ID) |
>> >\
>> >> -
>> > (RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ))
>> >> +#define RTE_EVENT_ETH_RX_ADAPTER_SW_CAP
>> >\
>> >> + ((RTE_EVENT_ETH_RX_ADAPTER_CAP_OVERRIDE_FLOW_ID) |
>> >\
>> >> + (RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ) |
>> >\
>> >> + (RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR))
>> >>
>> >> #define RTE_EVENT_CRYPTO_ADAPTER_SW_CAP \
>> >>
>> > RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA
>> >> diff --git a/lib/librte_eventdev/rte_event_eth_rx_adapter.c
>> >b/lib/librte_eventdev/rte_event_eth_rx_adapter.c
>> >> index ac8ba5bf0..c71990078 100644
>> >> --- a/lib/librte_eventdev/rte_event_eth_rx_adapter.c
>> >> +++ b/lib/librte_eventdev/rte_event_eth_rx_adapter.c
>> >> @@ -26,6 +26,10 @@
>> >> #define BATCH_SIZE 32
>> >> #define BLOCK_CNT_THRESHOLD 10
>> >> #define ETH_EVENT_BUFFER_SIZE (4*BATCH_SIZE)
>> >> +#define MAX_VECTOR_SIZE 1024
>> >> +#define MIN_VECTOR_SIZE 4
>> >> +#define MAX_VECTOR_NS 1E9
>> >> +#define MIN_VECTOR_NS 1E5
>> >>
>> >> #define ETH_RX_ADAPTER_SERVICE_NAME_LEN 32
>> >> #define ETH_RX_ADAPTER_MEM_NAME_LEN 32
>> >> @@ -59,6 +63,20 @@ struct eth_rx_poll_entry {
>> >> uint16_t eth_rx_qid;
>> >> };
>> >>
>> >> +struct eth_rx_vector_data {
>> >> + TAILQ_ENTRY(eth_rx_vector_data) next;
>> >> + uint16_t port;
>> >> + uint16_t queue;
>> >> + uint16_t max_vector_count;
>> >> + uint64_t event;
>> >> + uint64_t ts;
>> >> + uint64_t vector_timeout_ticks;
>> >> + struct rte_mempool *vector_pool;
>> >> + struct rte_event_vector *vector_ev;
>> >> +} __rte_cache_aligned;
>> >> +
>> >> +TAILQ_HEAD(eth_rx_vector_data_list, eth_rx_vector_data);
>> >> +
>> >> /* Instance per adapter */
>> >> struct rte_eth_event_enqueue_buffer {
>> >> /* Count of events in this buffer */
>> >> @@ -92,6 +110,14 @@ struct rte_event_eth_rx_adapter {
>> >> uint32_t wrr_pos;
>> >> /* Event burst buffer */
>> >> struct rte_eth_event_enqueue_buffer event_enqueue_buffer;
>> >> + /* Vector enable flag */
>> >> + uint8_t ena_vector;
>> >> + /* Timestamp of previous vector expiry list traversal */
>> >> + uint64_t prev_expiry_ts;
>> >> + /* Minimum ticks to wait before traversing expiry list */
>> >> + uint64_t vector_tmo_ticks;
>> >> + /* vector list */
>> >> + struct eth_rx_vector_data_list vector_list;
>> >> /* Per adapter stats */
>> >> struct rte_event_eth_rx_adapter_stats stats;
>> >> /* Block count, counts up to BLOCK_CNT_THRESHOLD */
>> >> @@ -198,9 +224,11 @@ struct eth_device_info {
>> >> struct eth_rx_queue_info {
>> >> int queue_enabled; /* True if added */
>> >> int intr_enabled;
>> >> + uint8_t ena_vector;
>> >> uint16_t wt; /* Polling weight */
>> >> uint32_t flow_id_mask; /* Set to ~0 if app provides flow id else
>> >0 */
>> >> uint64_t event;
>> >> + struct eth_rx_vector_data vector_data;
>> >> };
>> >>
>> >> static struct rte_event_eth_rx_adapter **event_eth_rx_adapter;
>> >> @@ -722,6 +750,9 @@ rxa_flush_event_buffer(struct
>> >rte_event_eth_rx_adapter *rx_adapter)
>> >> &rx_adapter->event_enqueue_buffer;
>> >> struct rte_event_eth_rx_adapter_stats *stats = &rx_adapter-
>> >>stats;
>> >>
>> >> + if (!buf->count)
>> >> + return 0;
>> >> +
>> >> uint16_t n = rte_event_enqueue_new_burst(rx_adapter-
>> >>eventdev_id,
>> >> rx_adapter->event_port_id,
>> >> buf->events,
>> >> @@ -742,6 +773,72 @@ rxa_flush_event_buffer(struct
>> >rte_event_eth_rx_adapter *rx_adapter)
>> >> return n;
>> >> }
>> >>
>> >> +static inline uint16_t
>> >> +rxa_create_event_vector(struct rte_event_eth_rx_adapter
>> >*rx_adapter,
>> >> + struct eth_rx_queue_info *queue_info,
>> >> + struct rte_eth_event_enqueue_buffer *buf,
>> >> + struct rte_mbuf **mbufs, uint16_t num)
>> >> +{
>> >> + struct rte_event *ev = &buf->events[buf->count];
>> >> + struct eth_rx_vector_data *vec;
>> >> + uint16_t filled, space, sz;
>> >> +
>> >> + filled = 0;
>> >> + vec = &queue_info->vector_data;
>> >> + while (num) {
>> >> + if (vec->vector_ev == NULL) {
>> >> + if (rte_mempool_get(vec->vector_pool,
>> >> + (void **)&vec->vector_ev) <
>> >0) {
>> >> + rte_pktmbuf_free_bulk(mbufs, num);
>> >> + return 0;
>> >> + }
>> >> + vec->vector_ev->nb_elem = 0;
>> >> + vec->vector_ev->port = vec->port;
>> >> + vec->vector_ev->queue = vec->queue;
>> >> + vec->vector_ev->attr_valid = true;
>> >> + TAILQ_INSERT_TAIL(&rx_adapter->vector_list,
>> >vec, next);
>> >> + } else if (vec->vector_ev->nb_elem == vec-
>> >>max_vector_count) {
>> >
>> >Is there a case where nb_elem > max_vector_count as we
>accumulate
>> >sz to it ?
>>
>> I don't think so, that would overflow the vector event.
>>
>> >
>> >> + /* Event ready. */
>> >> + ev->event = vec->event;
>> >> + ev->vec = vec->vector_ev;
>> >> + ev++;
>> >> + filled++;
>> >> + vec->vector_ev = NULL;
>> >> + TAILQ_REMOVE(&rx_adapter->vector_list, vec,
>> >next);
>> >> + if (rte_mempool_get(vec->vector_pool,
>> >> + (void **)&vec->vector_ev) <
>> >0) {
>> >> + rte_pktmbuf_free_bulk(mbufs, num);
>> >> + return 0;
>> >> + }
>> >> + vec->vector_ev->nb_elem = 0;
>> >> + vec->vector_ev->port = vec->port;
>> >> + vec->vector_ev->queue = vec->queue;
>> >> + vec->vector_ev->attr_valid = true;
>> >> + TAILQ_INSERT_TAIL(&rx_adapter->vector_list,
>> >vec, next);
>> >> + }
>> >> +
>> >> + space = vec->max_vector_count - vec->vector_ev-
>> >>nb_elem;
>> >> + sz = num > space ? space : num;
>> >> + memcpy(vec->vector_ev->mbufs + vec->vector_ev-
>> >>nb_elem, mbufs,
>> >> + sizeof(void *) * sz);
>> >> + vec->vector_ev->nb_elem += sz;
>> >> + num -= sz;
>> >> + mbufs += sz;
>> >> + vec->ts = rte_rdtsc();
>> >> + }
>> >> +
>> >> + if (vec->vector_ev->nb_elem == vec->max_vector_count) {
>> >
>> >Same here.
>> >
>> >> + ev->event = vec->event;
>> >> + ev->vec = vec->vector_ev;
>> >> + ev++;
>> >> + filled++;
>> >> + vec->vector_ev = NULL;
>> >> + TAILQ_REMOVE(&rx_adapter->vector_list, vec, next);
>> >> + }
>> >> +
>> >> + return filled;
>> >> +}
>> >
>> >I am seeing more than one repeating code chunks in this function.
>> >Perhaps, you can give it a try to not repeat. We can drop if its
>> >performance affecting.
>>
>> I will try to move them to inline functions and test.
>>
>> >
>> >> +
>> >> static inline void
>> >> rxa_buffer_mbufs(struct rte_event_eth_rx_adapter *rx_adapter,
>> >> uint16_t eth_dev_id,
>> >> @@ -770,25 +867,30 @@ rxa_buffer_mbufs(struct
>> >rte_event_eth_rx_adapter *rx_adapter,
>> >> rss_mask = ~(((m->ol_flags & PKT_RX_RSS_HASH) != 0) - 1);
>> >> do_rss = !rss_mask && !eth_rx_queue_info->flow_id_mask;
>> >
>> >The RSS related code is executed for vector case as well. Can this be
>> >moved inside ena_vector if condition ?
>>
>> RSS is used to generate the event flowid, in vector case the flow id
>> Will be a combination of port and queue id.
>> The idea is that flows having the same RSS LSB will end up in the same
>> queue.
>>
>
>I meant to say, rss_mask and do_rss are used only when ena_vector is
>false. Could be moved inside the appropriate condition ?
>
Ah! I see I will move them inside the conditional.
>> >
>> >>
>> >> - for (i = 0; i < num; i++) {
>> >> - m = mbufs[i];
>> >> -
>> >> - rss = do_rss ?
>> >> - rxa_do_softrss(m, rx_adapter->rss_key_be) :
>> >> - m->hash.rss;
>> >> - ev->event = event;
>> >> - ev->flow_id = (rss & ~flow_id_mask) |
>> >> - (ev->flow_id & flow_id_mask);
>> >> - ev->mbuf = m;
>> >> - ev++;
>> >> + if (!eth_rx_queue_info->ena_vector) {
>> >> + for (i = 0; i < num; i++) {
>> >> + m = mbufs[i];
>> >> +
>> >> + rss = do_rss ? rxa_do_softrss(m, rx_adapter-
>> >>rss_key_be)
>> >> + : m->hash.rss;
>> >> + ev->event = event;
>> >> + ev->flow_id = (rss & ~flow_id_mask) |
>> >> + (ev->flow_id & flow_id_mask);
>> >> + ev->mbuf = m;
>> >> + ev++;
>> >> + }
>> >> + } else {
>> >> + num = rxa_create_event_vector(rx_adapter,
>> >eth_rx_queue_info,
>> >> + buf, mbufs, num);
>> >> }
>> >>
>> >> - if (dev_info->cb_fn) {
>> >> + if (num && dev_info->cb_fn) {
>> >>
>> >> dropped = 0;
>> >> nb_cb = dev_info->cb_fn(eth_dev_id, rx_queue_id,
>> >> - ETH_EVENT_BUFFER_SIZE, buf-
>> >>count, ev,
>> >> - num, dev_info->cb_arg,
>> >&dropped);
>> >> + ETH_EVENT_BUFFER_SIZE, buf-
>> >>count,
>> >> + &buf->events[buf->count],
>> >num,
>> >> + dev_info->cb_arg, &dropped);
>> >
>> >Before this patch, we pass ev which is &buf->events[buf->count] +
>num
>> >as fifth param when calling cb_fn. Now, we are passing &buf-
>> >>events[buf->count] for non-vector case. Do you see this as an
>issue?
>> >
>>
>> The callback function takes in the array newly formed events i.e. we
>need
>> to pass the start of array and the count.
>>
>> the previous code had a bug where it passes the end of the event list.
>
>ok, that makes sense.
>
>>
>> >Also, for vector case would it make sense to do pass &buf-
>>events[buf-
>> >>count] + num ?
>> >
>> >> if (unlikely(nb_cb > num))
>> >> RTE_EDEV_LOG_ERR("Rx CB returned %d (> %d)
>> >events",
>> >> nb_cb, num);
>> >> @@ -1124,6 +1226,30 @@ rxa_poll(struct
>rte_event_eth_rx_adapter
>> >*rx_adapter)
>> >> return nb_rx;
>> >> }
>> >>
>> >> +static void
>> >> +rxa_vector_expire(struct eth_rx_vector_data *vec, void *arg)
>> >> +{
>> >> + struct rte_event_eth_rx_adapter *rx_adapter = arg;
>> >> + struct rte_eth_event_enqueue_buffer *buf =
>> >> + &rx_adapter->event_enqueue_buffer;
>> >> + struct rte_event *ev;
>> >> +
>> >> + if (buf->count)
>> >> + rxa_flush_event_buffer(rx_adapter);
>> >> +
>> >> + if (vec->vector_ev->nb_elem == 0)
>> >> + return;
>> >> + ev = &buf->events[buf->count];
>> >> +
>> >> + /* Event ready. */
>> >> + ev->event = vec->event;
>> >> + ev->vec = vec->vector_ev;
>> >> + buf->count++;
>> >> +
>> >> + vec->vector_ev = NULL;
>> >> + vec->ts = 0;
>> >> +}
>> >> +
>> >> static int
>> >> rxa_service_func(void *args)
>> >> {
>> >> @@ -1137,6 +1263,24 @@ rxa_service_func(void *args)
>> >> return 0;
>> >> }
>> >>
>> >> + if (rx_adapter->ena_vector) {
>> >> + if ((rte_rdtsc() - rx_adapter->prev_expiry_ts) >=
>> >> + rx_adapter->vector_tmo_ticks) {
>> >> + struct eth_rx_vector_data *vec;
>> >> +
>> >> + TAILQ_FOREACH(vec, &rx_adapter->vector_list,
>> >next) {
>> >> + uint64_t elapsed_time = rte_rdtsc() -
>> >vec->ts;
>> >> +
>> >> + if (elapsed_time >= vec-
>> >>vector_timeout_ticks) {
>> >> + rxa_vector_expire(vec,
>> >rx_adapter);
>> >> + TAILQ_REMOVE(&rx_adapter-
>> >>vector_list,
>> >> + vec, next);
>> >> + }
>> >> + }
>> >> + rx_adapter->prev_expiry_ts = rte_rdtsc();
>> >> + }
>> >> + }
>> >> +
>> >> stats = &rx_adapter->stats;
>> >> stats->rx_packets += rxa_intr_ring_dequeue(rx_adapter);
>> >> stats->rx_packets += rxa_poll(rx_adapter);
>> >> @@ -1640,6 +1784,28 @@ rxa_update_queue(struct
>> >rte_event_eth_rx_adapter *rx_adapter,
>> >> }
>> >> }
>> >>
>> >> +static void
>> >> +rxa_set_vector_data(struct eth_rx_queue_info *queue_info,
>> >uint16_t vector_count,
>> >> + uint64_t vector_ns, struct rte_mempool *mp, int32_t
>> >qid,
>> >> + uint16_t port_id)
>> >> +{
>> >> +#define NSEC2TICK(__ns, __freq) (((__ns) * (__freq)) / 1E9)
>> >> + struct eth_rx_vector_data *vector_data;
>> >> + uint32_t flow_id;
>> >> +
>> >> + vector_data = &queue_info->vector_data;
>> >> + vector_data->max_vector_count = vector_count;
>> >> + vector_data->port = port_id;
>> >> + vector_data->queue = qid;
>> >> + vector_data->vector_pool = mp;
>> >> + vector_data->vector_timeout_ticks =
>> >> + NSEC2TICK(vector_ns, rte_get_timer_hz());
>> >> + vector_data->ts = 0;
>> >> + flow_id = queue_info->event & 0xFFFFF;
>> >> + flow_id = flow_id == 0 ? (qid & 0xFF) | (port_id & 0xFFFF) :
>> >flow_id;
>> >
>> >Maybe I am missing something here. Looking at the code it looks like
>> >qid and port_id may overlap. For e.g., if qid = 0x10 and port_id =
>0x11,
>> >flow_id would end up being 0x11. Is this the expectation? Also, it
>may
>> >be useful to document flow_id format.
>>
>> The flow_id is 20 bit, I guess we could do 12bit queue_id and 8bit port
>> as a flow.
>
>This sounds reasonable to me. It would be useful to have the flow_id
>format and how it is used for vectorization in Rx/Tx adapter
>documentation.
This is only applicable to the SW Rx adapter implementation a HW implementation
might have
its own way of implementing the flow aggregation.
There is no documentation specific to SW Rx adapter, I will add it to the
commit log.
>
>>
>> >Comparing this format with existing RSS hash based method, are we
>> >saying that all mbufs received in a rx burst are part of same flow
>when
>> >vectorization is used?
>>
>> Yes, the hard way to do this is to use a hash table and treating each
>> mbuf having an unique flow.
>>
>> >
>> >> + vector_data->event = (queue_info->event & ~0xFFFFF) |
>> >flow_id;
>> >> +}
>> >> +
>> >> static void
>> >> rxa_sw_del(struct rte_event_eth_rx_adapter *rx_adapter,
>> >> struct eth_device_info *dev_info,
>> >> @@ -1741,6 +1907,44 @@ rxa_add_queue(struct
>> >rte_event_eth_rx_adapter *rx_adapter,
>> >> }
>> >> }
>> >>
>> >> +static void
>> >> +rxa_sw_event_vector_configure(
>> >> + struct rte_event_eth_rx_adapter *rx_adapter, uint16_t
>> >eth_dev_id,
>> >> + int rx_queue_id,
>> >> + const struct rte_event_eth_rx_adapter_event_vector_config
>> >*config)
>> >> +{
>> >> + struct eth_device_info *dev_info = &rx_adapter-
>> >>eth_devices[eth_dev_id];
>> >> + struct eth_rx_queue_info *queue_info;
>> >> + struct rte_event *qi_ev;
>> >> +
>> >> + if (rx_queue_id == -1) {
>> >> + uint16_t nb_rx_queues;
>> >> + uint16_t i;
>> >> +
>> >> + nb_rx_queues = dev_info->dev->data->nb_rx_queues;
>> >> + for (i = 0; i < nb_rx_queues; i++)
>> >> + rxa_sw_event_vector_configure(rx_adapter,
>> >eth_dev_id, i,
>> >> + config);
>> >> + return;
>> >> + }
>> >> +
>> >> + queue_info = &dev_info->rx_queue[rx_queue_id];
>> >> + qi_ev = (struct rte_event *)&queue_info->event;
>> >> + queue_info->ena_vector = 1;
>> >> + qi_ev->event_type =
>> >RTE_EVENT_TYPE_ETH_RX_ADAPTER_VECTOR;
>> >> + rxa_set_vector_data(queue_info, config->vector_sz,
>> >> + config->vector_timeout_ns, config-
>> >>vector_mp,
>> >> + rx_queue_id, dev_info->dev->data->port_id);
>> >> + rx_adapter->ena_vector = 1;
>> >> + rx_adapter->vector_tmo_ticks =
>> >> + rx_adapter->vector_tmo_ticks ?
>> >> + RTE_MIN(config->vector_timeout_ns << 1,
>> >> + rx_adapter->vector_tmo_ticks) :
>> >> + config->vector_timeout_ns << 1;
>> >> + rx_adapter->prev_expiry_ts = 0;
>> >> + TAILQ_INIT(&rx_adapter->vector_list);
>> >> +}
>> >> +
>> >> static int rxa_sw_add(struct rte_event_eth_rx_adapter
>*rx_adapter,
>> >> uint16_t eth_dev_id,
>> >> int rx_queue_id,
>> >> @@ -2081,6 +2285,15 @@
>> >rte_event_eth_rx_adapter_queue_add(uint8_t id,
>> >> return -EINVAL;
>> >> }
>> >>
>> >> + if ((cap &
>> >RTE_EVENT_ETH_RX_ADAPTER_CAP_EVENT_VECTOR) == 0 &&
>> >> + (queue_conf->rx_queue_flags &
>> >> + RTE_EVENT_ETH_RX_ADAPTER_QUEUE_EVENT_VECTOR)) {
>> >> + RTE_EDEV_LOG_ERR("Event vectorization is not
>> >supported,"
>> >> + " eth port: %" PRIu16 " adapter id: %"
>> >PRIu8,
>> >> + eth_dev_id, id);
>> >> + return -EINVAL;
>> >> + }
>> >> +
>> >> if ((cap &
>> >RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ) == 0 &&
>> >> (rx_queue_id != -1)) {
>> >> RTE_EDEV_LOG_ERR("Rx queues can only be connected
>> >to single "
>> >> @@ -2143,6 +2356,17 @@
>> >rte_event_eth_rx_adapter_queue_add(uint8_t id,
>> >> return 0;
>> >> }
>> >>
>> >> +static int
>> >> +rxa_sw_vector_limits(struct
>> >rte_event_eth_rx_adapter_vector_limits *limits)
>> >> +{
>> >> + limits->max_sz = MAX_VECTOR_SIZE;
>> >> + limits->min_sz = MIN_VECTOR_SIZE;
>> >> + limits->max_timeout_ns = MAX_VECTOR_NS;
>> >> + limits->min_timeout_ns = MIN_VECTOR_NS;
>> >> +
>> >> + return 0;
>> >> +}
>> >> +
>> >> int
>> >> rte_event_eth_rx_adapter_queue_del(uint8_t id, uint16_t
>> >eth_dev_id,
>> >> int32_t rx_queue_id)
>> >> @@ -2333,7 +2557,8 @@
>> >rte_event_eth_rx_adapter_queue_event_vector_config(
>> >> ret = dev->dev_ops-
>> >>eth_rx_adapter_event_vector_config(
>> >> dev, &rte_eth_devices[eth_dev_id],
>> >rx_queue_id, config);
>> >> } else {
>> >> - ret = -ENOTSUP;
>> >> + rxa_sw_event_vector_configure(rx_adapter,
>> >eth_dev_id,
>> >> + rx_queue_id, config);
>> >> }
>> >>
>> >> return ret;
>> >> @@ -2371,7 +2596,7 @@
>> >rte_event_eth_rx_adapter_vector_limits_get(
>> >> ret = dev->dev_ops-
>> >>eth_rx_adapter_vector_limits_get(
>> >> dev, &rte_eth_devices[eth_port_id], limits);
>> >> } else {
>> >> - ret = -ENOTSUP;
>> >> + ret = rxa_sw_vector_limits(limits);
>> >> }
>> >>
>> >> return ret;
>> >> diff --git a/lib/librte_eventdev/rte_eventdev.c
>> >b/lib/librte_eventdev/rte_eventdev.c
>> >> index f95edc075..254a31b1f 100644
>> >> --- a/lib/librte_eventdev/rte_eventdev.c
>> >> +++ b/lib/librte_eventdev/rte_eventdev.c
>> >> @@ -122,7 +122,11 @@
>rte_event_eth_rx_adapter_caps_get(uint8_t
>> >dev_id, uint16_t eth_port_id,
>> >>
>> >> if (caps == NULL)
>> >> return -EINVAL;
>> >> - *caps = 0;
>> >> +
>> >> + if (dev->dev_ops->eth_rx_adapter_caps_get == NULL)
>> >> + *caps = RTE_EVENT_ETH_RX_ADAPTER_SW_CAP;
>> >> + else
>> >> + *caps = 0;
>> >
>> >Any reason why we had to set default caps value? I am thinking if sw
>> >event device is used, it would set it anyways.
>> >
>>
>> There are multiple sw event devices which don't implement caps_get
>> function, this changes solves that.
>>
>> >>
>> >> return dev->dev_ops->eth_rx_adapter_caps_get ?
>> >> (*dev->dev_ops-
>> >>eth_rx_adapter_caps_get)(dev,
>> >> --
>> >> 2.17.1
