The value in "/sys/.../cpuinfo_cur_freq" may not be exactly the
same as what was set. For example, if "2400000" is written to
"/sys/.../cpufreq/scaling_setspeed" to set the frequency, then the
value in "/sys/.../cpuinfo_cur_freq" may be "2401222". So need to
round the value.
Fixes: ed7c51a6a680 ("app/test: vm power management")
Cc: alan.ca...@intel.com
Cc: sta...@dpdk.org
Signed-off-by: Richael Zhuang <richael.zhu...@arm.com>
---
app/test/test_power_cpufreq.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/app/test/test_power_cpufreq.c b/app/test/test_power_cpufreq.c
index d47b3e0a1..f753d24ac 100644
--- a/app/test/test_power_cpufreq.c
+++ b/app/test/test_power_cpufreq.c
@@ -35,6 +35,10 @@ test_power_caps(void)
#define TEST_POWER_LCORE_INVALID ((unsigned)RTE_MAX_LCORE)
#define TEST_POWER_FREQS_NUM_MAX ((unsigned)RTE_MAX_LCORE_FREQS)
+/* macros used for rounding frequency to nearest 100000 */
+#define TEST_FREQ_ROUNDING_DELTA 50000
+#define TEST_ROUND_FREQ_TO_N_100000 100000
+
#define TEST_POWER_SYSFILE_CUR_FREQ \
"/sys/devices/system/cpu/cpu%u/cpufreq/cpuinfo_cur_freq"
@@ -67,7 +71,17 @@ check_cur_freq(unsigned lcore_id, uint32_t idx)
goto fail_all;
cur_freq = strtoul(buf, NULL, TEST_POWER_CONVERT_TO_DECIMAL);
- ret = (freqs[idx] == cur_freq ? 0 : -1);
+
+ /* convert the frequency to nearest 100000 value
+ * Ex: if cur_freq=1396789 then freq_conv=1400000
+ * Ex: if cur_freq=800030 then freq_conv=800000
+ */
+ unsigned int freq_conv = 0;
+ freq_conv = (cur_freq + TEST_FREQ_ROUNDING_DELTA)
+ / TEST_ROUND_FREQ_TO_N_100000;
+ freq_conv = freq_conv * TEST_ROUND_FREQ_TO_N_100000;
+
+ ret = (freqs[idx] == freq_conv ? 0 : -1);
if (ret == 0)
break;
--
2.20.1
