> -----Original Message-----
> From: Zhang, AlvinX <alvinx.zh...@intel.com>
> Sent: Wednesday, May 12, 2021 1:48 PM
> To: Xing, Beilei <beilei.x...@intel.com>; Xu, Ting <ting...@intel.com>
> Cc: dev@dpdk.org; Zhang, AlvinX <alvinx.zh...@intel.com>;
> sta...@dpdk.org
> Subject: [PATCH] net/i40e: fix VF RSS configuration
> 
> The kernel driver supports VF RSS configuration message
> "VIRTCHNL_OP_GET_RSS_HENA_CAPS and VIRTCHNL_OP_SET_RSS_HENA",
> this patch adds PMD support for these messages.
> 
> Fixes: b81295c474b0 ("net/i40e: add user callback for VF to PF message")
> Cc: sta...@dpdk.org
> 
> Signed-off-by: Alvin Zhang <alvinx.zh...@intel.com>
> ---
>  drivers/net/i40e/i40e_pf.c | 58
> ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
> 
> diff --git a/drivers/net/i40e/i40e_pf.c b/drivers/net/i40e/i40e_pf.c index
> 9804ed4..b18dc84 100644
> --- a/drivers/net/i40e/i40e_pf.c
> +++ b/drivers/net/i40e/i40e_pf.c
> @@ -29,6 +29,28 @@
> 
>  #define I40E_CFG_CRCSTRIP_DEFAULT 1
> 
> +/* Supported RSS offloads */
> +#define I40E_DEFAULT_RSS_HENA ( \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_UDP) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_SCTP) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_OTHER) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV4) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_UDP) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_TCP) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_SCTP) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_OTHER) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV6) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_L2_PAYLOAD))
> +
> +#define I40E_DEFAULT_RSS_HENA_EXPANDED (I40E_DEFAULT_RSS_HENA |
> \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN_NO_ACK) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_TCP_SYN_NO_ACK) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP) | \
> +     BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP))
> +
>  static int
>  i40e_pf_host_switch_queues(struct i40e_pf_vf *vf,
>                          struct virtchnl_queue_select *qsel, @@ -1288,6
> +1310,36 @@
>                               (u8 *)vfres, sizeof(*vfres));
>  }
> 
> +static int
> +i40e_pf_host_process_cmd_get_rss_hena(struct i40e_pf_vf *vf) {
> +     struct virtchnl_rss_hena vrh = {0};
> +     struct i40e_pf *pf = vf->pf;
> +
> +     if (pf->adapter->hw.mac.type == I40E_MAC_X722)
> +             vrh.hena = I40E_DEFAULT_RSS_HENA_EXPANDED;
> +     else
> +             vrh.hena = I40E_DEFAULT_RSS_HENA;
> +
> +     return i40e_pf_host_send_msg_to_vf(vf,
> VIRTCHNL_OP_GET_RSS_HENA_CAPS,
> +                                        0, (u8 *)&vrh, sizeof(vrh));

Use uint8_t in PMD.

> +}
> +
> +static int
> +i40e_pf_host_process_cmd_set_rss_hena(struct i40e_pf_vf *vf, u8 *msg) {

Same above. And please check below.

> +     struct virtchnl_rss_hena *vrh =
> +             (struct virtchnl_rss_hena *)msg;
> +     struct i40e_hw *hw = &vf->pf->adapter->hw;
> +
> +     i40e_write_rx_ctl(hw, I40E_VFQF_HENA1(0, vf->vf_idx), (u32)vrh-
> >hena);
> +     i40e_write_rx_ctl(hw, I40E_VFQF_HENA1(1, vf->vf_idx),
> +                       (u32)(vrh->hena >> 32));
> +
> +     return i40e_pf_host_send_msg_to_vf(vf,
> VIRTCHNL_OP_SET_RSS_HENA,
> +                                        0, NULL, 0);
> +}
> +
>  void
>  i40e_pf_host_handle_vf_msg(struct rte_eth_dev *dev,
>                          uint16_t abs_vf_id, uint32_t opcode, @@ -1458,6
> +1510,12 @@
>               PMD_DRV_LOG(INFO, "OP_REQUEST_QUEUES received");
>               i40e_pf_host_process_cmd_request_queues(vf, msg);
>               break;
> +     case VIRTCHNL_OP_GET_RSS_HENA_CAPS:
> +             ret = i40e_pf_host_process_cmd_get_rss_hena(vf);
> +             break;
> +     case VIRTCHNL_OP_SET_RSS_HENA:
> +             ret = i40e_pf_host_process_cmd_set_rss_hena(vf, msg);
> +             break;
> 
>       /* Don't add command supported below, which will
>        * return an error code.
> --
> 1.8.3.1

Reply via email to