From: Kalesh AP <kalesh-anakkur.pura...@broadcom.com> - HWRM version updated to 1.10.2.44 - Added corresponding driver changes for the Admin MTU field name change.
Signed-off-by: Kalesh AP <kalesh-anakkur.pura...@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khapa...@broadcom.com> Reviewed-by: Somnath Kotur <somnath.ko...@broadcom.com> --- drivers/net/bnxt/bnxt_hwrm.c | 14 +- drivers/net/bnxt/hsi_struct_def_dpdk.h | 1202 ++++++++++++++++++++++++++++++-- 2 files changed, 1166 insertions(+), 50 deletions(-) diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c index 4593991..0568476 100644 --- a/drivers/net/bnxt/bnxt_hwrm.c +++ b/drivers/net/bnxt/bnxt_hwrm.c @@ -3340,7 +3340,7 @@ int bnxt_hwrm_func_qcfg(struct bnxt *bp, uint16_t *mtu) } if (mtu) - *mtu = rte_le_to_cpu_16(resp->mtu); + *mtu = rte_le_to_cpu_16(resp->admin_mtu); switch (resp->port_partition_type) { case HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0: @@ -3468,7 +3468,7 @@ static int bnxt_hwrm_pf_func_cfg(struct bnxt *bp, uint32_t enables; int rc; - enables = HWRM_FUNC_CFG_INPUT_ENABLES_MTU | + enables = HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_MTU | HWRM_FUNC_CFG_INPUT_ENABLES_MRU | HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS | HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS | @@ -3488,7 +3488,7 @@ static int bnxt_hwrm_pf_func_cfg(struct bnxt *bp, } req.flags = rte_cpu_to_le_32(bp->pf->func_cfg_flags); - req.mtu = rte_cpu_to_le_16(BNXT_MAX_MTU); + req.admin_mtu = rte_cpu_to_le_16(BNXT_MAX_MTU); req.mru = rte_cpu_to_le_16(BNXT_VNIC_MRU(bp->eth_dev->data->mtu)); req.num_rsscos_ctxs = rte_cpu_to_le_16(pf_resc->num_rsscos_ctxs); req.num_stat_ctxs = rte_cpu_to_le_16(pf_resc->num_stat_ctxs); @@ -3548,7 +3548,7 @@ bnxt_fill_vf_func_cfg_req_old(struct bnxt *bp, struct hwrm_func_cfg_input *req, int num_vfs) { - req->enables = rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_MTU | + req->enables = rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_MTU | HWRM_FUNC_CFG_INPUT_ENABLES_MRU | HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS | HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS | @@ -3559,9 +3559,9 @@ bnxt_fill_vf_func_cfg_req_old(struct bnxt *bp, HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS | HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS); - req->mtu = rte_cpu_to_le_16(bp->eth_dev->data->mtu + RTE_ETHER_HDR_LEN + - RTE_ETHER_CRC_LEN + VLAN_TAG_SIZE * - BNXT_NUM_VLANS); + req->admin_mtu = rte_cpu_to_le_16(bp->eth_dev->data->mtu + RTE_ETHER_HDR_LEN + + RTE_ETHER_CRC_LEN + VLAN_TAG_SIZE * + BNXT_NUM_VLANS); req->mru = rte_cpu_to_le_16(BNXT_VNIC_MRU(bp->eth_dev->data->mtu)); req->num_rsscos_ctxs = rte_cpu_to_le_16(bp->max_rsscos_ctx / (num_vfs + 1)); diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h index f715bc6..4d7efb1 100644 --- a/drivers/net/bnxt/hsi_struct_def_dpdk.h +++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h @@ -364,6 +364,8 @@ struct cmd_nums { #define HWRM_QUEUE_VLANPRI_QCAPS UINT32_C(0x83) #define HWRM_QUEUE_VLANPRI2PRI_QCFG UINT32_C(0x84) #define HWRM_QUEUE_VLANPRI2PRI_CFG UINT32_C(0x85) + #define HWRM_QUEUE_GLOBAL_CFG UINT32_C(0x86) + #define HWRM_QUEUE_GLOBAL_QCFG UINT32_C(0x87) #define HWRM_CFA_L2_FILTER_ALLOC UINT32_C(0x90) #define HWRM_CFA_L2_FILTER_FREE UINT32_C(0x91) #define HWRM_CFA_L2_FILTER_CFG UINT32_C(0x92) @@ -438,6 +440,8 @@ struct cmd_nums { #define HWRM_FW_STATE_UNQUIESCE UINT32_C(0xd8) /* Tells the fw to collect dsc dump on a given port and lane. */ #define HWRM_PORT_DSC_DUMP UINT32_C(0xd9) + #define HWRM_PORT_EP_TX_QCFG UINT32_C(0xda) + #define HWRM_PORT_EP_TX_CFG UINT32_C(0xdb) #define HWRM_TEMP_MONITOR_QUERY UINT32_C(0xe0) #define HWRM_REG_POWER_QUERY UINT32_C(0xe1) #define HWRM_CORE_FREQUENCY_QUERY UINT32_C(0xe2) @@ -535,6 +539,10 @@ struct cmd_nums { #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS UINT32_C(0x124) /* Experimental - DEPRECATED */ #define HWRM_CFA_TFLIB UINT32_C(0x125) + /* Experimental */ + #define HWRM_CFA_LAG_GROUP_MEMBER_RGTR UINT32_C(0x126) + /* Experimental */ + #define HWRM_CFA_LAG_GROUP_MEMBER_UNRGTR UINT32_C(0x127) /* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */ #define HWRM_ENGINE_CKV_STATUS UINT32_C(0x12e) /* Engine CKV - Add a new CKEK used to encrypt keys. */ @@ -637,6 +645,18 @@ struct cmd_nums { #define HWRM_FUNC_SPD_CFG UINT32_C(0x19a) /* Query SoC packet DMA settings */ #define HWRM_FUNC_SPD_QCFG UINT32_C(0x19b) + /* PTP - Queries configuration of timesync IO pins. */ + #define HWRM_FUNC_PTP_PIN_QCFG UINT32_C(0x19c) + /* PTP - Configuration of timesync IO pins. */ + #define HWRM_FUNC_PTP_PIN_CFG UINT32_C(0x19d) + /* PTP - Configuration for disciplining PHC. */ + #define HWRM_FUNC_PTP_CFG UINT32_C(0x19e) + /* PTP - Queries for PHC timestamps. */ + #define HWRM_FUNC_PTP_TS_QUERY UINT32_C(0x19f) + /* PTP - Extended PTP configuration. */ + #define HWRM_FUNC_PTP_EXT_CFG UINT32_C(0x1a0) + /* PTP - Query extended PTP configuration. */ + #define HWRM_FUNC_PTP_EXT_QCFG UINT32_C(0x1a1) /* Experimental */ #define HWRM_SELFTEST_QLIST UINT32_C(0x200) /* Experimental */ @@ -674,6 +694,26 @@ struct cmd_nums { #define HWRM_MFG_PARAM_SEEPROM_READ UINT32_C(0x20f) /* Tells the fw to get the health of seeprom data */ #define HWRM_MFG_PARAM_SEEPROM_HEALTH UINT32_C(0x210) + /* + * The command is used for certificate provisioning to export a + * Certificate Signing Request (CSR) from the device. + */ + #define HWRM_MFG_PRVSN_EXPORT_CSR UINT32_C(0x211) + /* + * The command is used for certificate provisioning to import a + * CA-signed certificate chain to the device. + */ + #define HWRM_MFG_PRVSN_IMPORT_CERT UINT32_C(0x212) + /* + * The command is used for certificate provisioning to query the + * provisioned state. + */ + #define HWRM_MFG_PRVSN_GET_STATE UINT32_C(0x213) + /* + * The command is used to get the hash of the NVM configuration that is + * calculated during firmware boot. + */ + #define HWRM_MFG_GET_NVM_MEASUREMENT UINT32_C(0x214) /* Experimental */ #define HWRM_TF UINT32_C(0x2bc) /* Experimental */ @@ -785,6 +825,25 @@ struct cmd_nums { #define HWRM_DBG_QCFG UINT32_C(0xff21) /* Set destination parameters for crashdump medium */ #define HWRM_DBG_CRASHDUMP_MEDIUM_CFG UINT32_C(0xff22) + /* Experimental */ + #define HWRM_DBG_USEQ_ALLOC UINT32_C(0xff23) + /* Experimental */ + #define HWRM_DBG_USEQ_FREE UINT32_C(0xff24) + /* Experimental */ + #define HWRM_DBG_USEQ_FLUSH UINT32_C(0xff25) + /* Experimental */ + #define HWRM_DBG_USEQ_QCAPS UINT32_C(0xff26) + /* Experimental */ + #define HWRM_DBG_USEQ_CW_CFG UINT32_C(0xff27) + /* Experimental */ + #define HWRM_DBG_USEQ_SCHED_CFG UINT32_C(0xff28) + /* Experimental */ + #define HWRM_DBG_USEQ_RUN UINT32_C(0xff29) + /* Experimental */ + #define HWRM_DBG_USEQ_DELIVERY_REQ UINT32_C(0xff2a) + /* Experimental */ + #define HWRM_DBG_USEQ_RESP_HDR UINT32_C(0xff2b) + #define HWRM_NVM_DEFRAG UINT32_C(0xffec) #define HWRM_NVM_REQ_ARBITRATION UINT32_C(0xffed) /* Experimental */ #define HWRM_NVM_FACTORY_DEFAULTS UINT32_C(0xffee) @@ -904,6 +963,13 @@ struct ret_codes { */ #define HWRM_ERR_CODE_RESOURCE_LOCKED UINT32_C(0x11) /* + * This error code is reported by Firmware when an operation requested + * by a VF cannot be forwarded to the parent PF as required, either + * because the PF is down or otherwise doesn't have an appropriate + * async completion ring or associated forwarding buffers configured. + */ + #define HWRM_ERR_CODE_PF_UNAVAILABLE UINT32_C(0x12) + /* * This value indicates that the HWRM response is in TLV format and * should be interpreted as one or more TLVs starting with the * hwrm_resp_hdr TLV. This value is not an indication of any error @@ -990,8 +1056,8 @@ struct hwrm_err_output { #define HWRM_VERSION_MINOR 10 #define HWRM_VERSION_UPDATE 2 /* non-zero means beta version */ -#define HWRM_VERSION_RSVD 22 -#define HWRM_VERSION_STR "1.10.2.22" +#define HWRM_VERSION_RSVD 44 +#define HWRM_VERSION_STR "1.10.2.44" /**************** * hwrm_ver_get * @@ -1547,7 +1613,18 @@ struct hwrm_ver_get_output { * used with the short cmd request format. */ uint16_t max_ext_req_len; - uint8_t unused_1[5]; + /* + * This field returns the maximum request timeout value in seconds. + * For backward compatibility, a value of zero should be interpreted + * as the default value of 40 seconds. Drivers should always honor the + * maximum timeout, but are permitted to warn if a longer duration than + * this default is advertised. Values larger than 40 seconds should + * only be used as a stopgap measure to address a device limitation or + * for the purposes of test and debugging. The long term goal is for + * firmware to significantly reduce this value in the passage of time. + */ + uint16_t max_req_timeout; + uint8_t unused_1[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -7466,9 +7543,29 @@ struct hwrm_async_event_cmpl { */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ECHO_REQUEST \ UINT32_C(0x42) + /* + * An event from firmware indicating who has been selected as the + * PHC Master or secondary. Also indicates the last time a failover + * happens. + */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PHC_MASTER \ + UINT32_C(0x43) + /* + * An event from firmware showing the last PPS timestamp that has been + * latched. + */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PPS_TIMESTAMP \ + UINT32_C(0x44) + /* + * An event from firmware indicating that an error has occurred. + * The driver should log the event so that an administrator can be + * aware that a problem has occurred that may need attention. + */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ERROR_REPORT \ + UINT32_C(0x45) /* Maximum Registrable event id. */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_MAX_RGTR_EVENT_ID \ - UINT32_C(0x43) + UINT32_C(0x46) /* * A trace log message. This contains firmware trace logs string * embedded in the asynchronous message. This is an experimental @@ -7761,6 +7858,9 @@ struct hwrm_async_event_cmpl_dcb_config_change { /* APP configuration change */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_APP \ UINT32_C(0x4) + /* DSCP configuration change */ + #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_DSCP \ + UINT32_C(0x8) uint8_t opaque_v; /* * This value is written by the NIC such that it will be different @@ -8775,6 +8875,17 @@ struct hwrm_async_event_cmpl_vf_cfg_change { HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE /* Event specific data */ uint32_t event_data2; + /* + * This value indicates the VF ID of the VF whose configuration + * is changing if this async. event is sent to the parent PF. + * The firmware supports sending this to the parent PF if the + * `hwrm_func_qcaps.vf_cfg_async_for_pf_supported` value is 1. + * This value is undefined when the async. event is sent to the + * VF. + */ + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA2_VF_ID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA2_VF_ID_SFT 0 uint8_t opaque_v; /* * This value is written by the NIC such that it will be different @@ -9667,6 +9778,230 @@ struct hwrm_async_event_cmpl_echo_request { uint32_t event_data1; } __rte_packed; +/* hwrm_async_event_cmpl_phc_master (size:128b/16B) */ +struct hwrm_async_event_cmpl_phc_master { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* + * This async event is used to notify driver of changes + * in PHC master. Only one master function can configure + * PHC. + */ + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_ID_PHC_MASTER \ + UINT32_C(0x43) + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_ID_PHC_MASTER + /* Event specific data */ + uint32_t event_data2; + /* This field provides the current master function. */ + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_MASTER_FID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_MASTER_FID_SFT \ + 0 + /* This field provides the current secondary function. */ + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_SEC_FID_MASK \ + UINT32_C(0xffff0000) + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_SEC_FID_SFT \ + 16 + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_OPAQUE_SFT 1 + /* 8-lsb timestamp (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates to the driver the type of PHC event. */ + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_MASK \ + UINT32_C(0xf) + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_SFT \ + 0 + /* + * Indicates PHC Master selection event. The master fid is + * specified in event_data2.phc_master_fid. + */ + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_MASTER \ + UINT32_C(0x1) + /* + * Indicates PHC Secondary selection event. The secondary fid is + * specified in event_data2.phc_sec_fid. + */ + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_SECONDARY \ + UINT32_C(0x2) + /* + * Indicates PHC failover event. Failover happens from + * event_data2.phc_master_fid to event_data2.phc_sec_fid. + */ + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_FAILOVER \ + UINT32_C(0x3) + #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_LAST \ + HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_FAILOVER +} __rte_packed; + +/* hwrm_async_event_cmpl_pps_timestamp (size:128b/16B) */ +struct hwrm_async_event_cmpl_pps_timestamp { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* + * This async notification message can be used to inform + * driver of the latest PPS timestamp that has been latched. + * When driver enables PPS event, Firmware will generate + * PPS timestamps every second, Firmware informs driver + * of this timestamp through the async event. + */ + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_ID_PPS_TIMESTAMP \ + UINT32_C(0x44) + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_ID_PPS_TIMESTAMP + /* Event specific data */ + uint32_t event_data2; + /* Indicates the PPS event type */ + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE \ + UINT32_C(0x1) + /* This is an internal event. */ + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_INTERNAL \ + UINT32_C(0x0) + /* This is an external event. */ + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_EXTERNAL \ + UINT32_C(0x1) + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_EXTERNAL + /* + * Indicates the pin number on which the event is + * received. + */ + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PIN_NUMBER_MASK \ + UINT32_C(0xe) + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PIN_NUMBER_SFT \ + 1 + /* + * Contains bits[47:32] of the upper PPS timestamp. + * Lower 32 bits are in event_data1. Together they + * provide the 48 bit PPS timestamp. + */ + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PPS_TIMESTAMP_UPPER_MASK \ + UINT32_C(0xffff0) + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PPS_TIMESTAMP_UPPER_SFT \ + 4 + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_OPAQUE_SFT 1 + /* 8-lsb timestamp (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp (100-msec resolution) */ + uint16_t timestamp_hi; + /* Contains the lower 32 bits of the PPS timestamp. */ + uint32_t event_data1; + /* Contains the lower 32 bit PPS timestamp */ + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA1_PPS_TIMESTAMP_LOWER_MASK \ + UINT32_C(0xffffffff) + #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA1_PPS_TIMESTAMP_LOWER_SFT \ + 0 +} __rte_packed; + +/* hwrm_async_event_cmpl_error_report (size:128b/16B) */ +struct hwrm_async_event_cmpl_error_report { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* + * This async notification message is used to inform + * the driver that an error has occurred which may need + * the attention of the administrator. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_ID_ERROR_REPORT \ + UINT32_C(0x45) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_ID_ERROR_REPORT + /* Event specific data. */ + uint32_t event_data2; + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_OPAQUE_SFT 1 + /* 8-lsb timestamp (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* + * Indicates the type of error being reported. See section on Error + * Report event error_types for details on each error. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_DATA1_ERROR_TYPE_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_DATA1_ERROR_TYPE_SFT 0 +} __rte_packed; + /* hwrm_async_event_cmpl_fw_trace_msg (size:128b/16B) */ struct hwrm_async_event_cmpl_fw_trace_msg { uint16_t type; @@ -9837,6 +10172,220 @@ struct hwrm_async_event_cmpl_hwrm_error { UINT32_C(0x1) } __rte_packed; +/* hwrm_async_event_cmpl_error_report_base (size:128b/16B) */ +struct hwrm_async_event_cmpl_error_report_base { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* + * This async notification message is used to inform + * the driver that an error has occurred which may need + * the attention of the administrator. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_ID_ERROR_REPORT \ + UINT32_C(0x45) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_ID_ERROR_REPORT + /* Event specific data. */ + uint32_t event_data2; + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_OPAQUE_SFT 1 + /* 8-lsb timestamp (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates the type of error being reported. */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_SFT \ + 0 + /* Reserved */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_RESERVED \ + UINT32_C(0x0) + /* + * The NIC was subjected to an extended pause storm which caused it + * to disable flow control in order to avoid stalling the Tx path. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_PAUSE_STORM \ + UINT32_C(0x1) + /* + * The NIC received an interrupt storm on a TSIO pin being used as + * PPS_IN which caused it to disable the interrupt. The signal + * should be fixed to be a proper 1 PPS signal before re-enabling + * it. The pin number on which this signal was received is stored + * in event_data2 as pin_id. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL \ + UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL +} __rte_packed; + +/* hwrm_async_event_cmpl_error_report_pause_storm (size:128b/16B) */ +struct hwrm_async_event_cmpl_error_report_pause_storm { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* + * This async notification message is used to inform + * the driver that an error has occurred which may need + * the attention of the administrator. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_ID_ERROR_REPORT \ + UINT32_C(0x45) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_ID_ERROR_REPORT + /* Event specific data. */ + uint32_t event_data2; + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_OPAQUE_SFT 1 + /* 8-lsb timestamp (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates the type of error being reported. */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_SFT \ + 0 + /* + * The NIC was subjected to an extended pause storm which caused it + * to disable flow control in order to avoid stalling the Tx path. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_PAUSE_STORM \ + UINT32_C(0x1) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_PAUSE_STORM +} __rte_packed; + +/* hwrm_async_event_cmpl_error_report_invalid_signal (size:128b/16B) */ +struct hwrm_async_event_cmpl_error_report_invalid_signal { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* + * This async notification message is used to inform + * the driver that an error has occurred which may need + * the attention of the administrator. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_ID_ERROR_REPORT \ + UINT32_C(0x45) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_ID_ERROR_REPORT + /* Event specific data. */ + uint32_t event_data2; + /* Indicates the TSIO pin on which invalid signal is detected. */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA2_PIN_ID_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA2_PIN_ID_SFT \ + 0 + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_OPAQUE_SFT 1 + /* 8-lsb timestamp (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates the type of error being reported. */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_SFT \ + 0 + /* + * The NIC received an interrupt storm on a TSIO pin being used as + * PPS_IN which caused it to disable the interrupt. The signal + * should be fixed to be a proper 1 PPS signal before re-enabling + * it. The pin number on which this signal was received is stored + * in event_data2 as pin_id. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL \ + UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL +} __rte_packed; + /* metadata_base_msg (size:64b/8B) */ struct metadata_base_msg { uint16_t md_type_link; @@ -11341,6 +11890,48 @@ struct hwrm_func_qcaps_output { */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_ECHO_REQUEST_SUPPORTED \ UINT32_C(0x8000) + /* + * When this bit is '1', it indicates that core firmware supports + * NPAR 1.2 on this function. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_NPAR_1_2_SUPPORTED \ + UINT32_C(0x10000) + /* When this bit is '1', it indicates that PTM feature is supported. */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PTP_PTM_SUPPORTED \ + UINT32_C(0x20000) + /* When this bit is '1', it indicates that PPS feature is supported. */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PTP_PPS_SUPPORTED \ + UINT32_C(0x40000) + /* + * When this bit is '1', it indicates that VF config. change + * async event is supported on the parent PF if the async. + * event is registered by the PF. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_VF_CFG_ASYNC_FOR_PF_SUPPORTED \ + UINT32_C(0x80000) + /* + * When this bit is '1', the NIC supports configuration of + * partition_min_bw and partition_max_bw. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PARTITION_BW_SUPPORTED \ + UINT32_C(0x100000) + /* + * When this bit is '1', the FW supports configuration of + * PCP and TPID values of the default VLAN. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_DFLT_VLAN_TPID_PCP_SUPPORTED \ + UINT32_C(0x200000) + /* When this bit is '1', it indicates that HW and FW support KTLS. */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_KTLS_SUPPORTED \ + UINT32_C(0x400000) + /* + * When this bit is '1', the firmware supports HWRM_PORT_EP_TX_CFG + * and HWRM_PORT_EP_TX_QCFG for endpoint rate control, and additions + * to HWRM_QUEUE_GLOBAL_CFG and HWRM_QUEUE_GLOBAL_QCFG for receive + * rate control. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_EP_RATE_CONTROL \ + UINT32_C(0x800000) /* The maximum number of SCHQs supported by this device. */ uint8_t max_schqs; uint8_t mpc_chnls_cap; @@ -11379,8 +11970,9 @@ struct hwrm_func_qcaps_output { * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field is + * written last. */ uint8_t valid; } __rte_packed; @@ -11431,7 +12023,7 @@ struct hwrm_func_qcfg_input { uint8_t unused_0[6]; } __rte_packed; -/* hwrm_func_qcfg_output (size:768b/96B) */ +/* hwrm_func_qcfg_output (size:832b/104B) */ struct hwrm_func_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; @@ -11578,6 +12170,14 @@ struct hwrm_func_qcfg_output { #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_ROOT \ UINT32_C(0x2000) /* + * This flag indicates RDMA support for child VFS of + * a physical function. + * If set to 1, RoCE is supported on all child VFs. + * If set to 0, RoCE is disabled on all child VFs. + */ + #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_ENABLE_RDMA_SRIOV \ + UINT32_C(0x4000) + /* * This value is current MAC address configured for this * function. A value of 00-00-00-00-00-00 indicates no * MAC address is currently configured. @@ -11620,12 +12220,15 @@ struct hwrm_func_qcfg_output { /* The allocated number of vnics to the function. */ uint16_t alloc_vnics; /* - * The maximum transmission unit of the function. - * If the reported mtu value is non-zero then it will used for the - * rings allocated on this function. otherwise the default + * The maximum transmission unit of the function + * configured by the admin pf. + * If the reported mtu value is non-zero then it will be used for the + * rings allocated on this function, otherwise the default * value is used if ring MTU is not specified. + * The driver cannot use any MTU bigger than this value + * if it is non-zero. */ - uint16_t mtu; + uint16_t admin_mtu; /* * The maximum receive unit of the function. * For vnics allocated on this function, this default @@ -11649,6 +12252,8 @@ struct hwrm_func_qcfg_output { #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3) /* Network Partitioning 2.0 */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4) + /* Network Partitioning 1.2 */ + #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_2 UINT32_C(0x5) /* Unknown */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN \ UINT32_C(0xff) @@ -11672,11 +12277,9 @@ struct hwrm_func_qcfg_output { uint16_t dflt_vnic_id; uint16_t max_mtu_configured; /* - * Minimum BW allocated for this function. - * The HWRM will translate this value into byte counter and - * time interval used for the scheduler inside the device. - * A value of 0 indicates the minimum bandwidth is not - * configured. + * Minimum guaranteed transmit bandwidth for this function. When + * specified for a PF, does not affect traffic from the PF's child VFs. + * A value of 0 indicates the minimum bandwidth is not configured. */ uint32_t min_bw; /* The bandwidth value. */ @@ -11710,7 +12313,7 @@ struct hwrm_func_qcfg_output { /* Value is in Gb or GB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ + /* Value is in 1/100th of a percentage of link bandwidth. */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ @@ -11719,11 +12322,9 @@ struct hwrm_func_qcfg_output { #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID /* - * Maximum BW allocated for this function. - * The HWRM will translate this value into byte counter and - * time interval used for the scheduler inside the device. - * A value of 0 indicates that the maximum bandwidth is not - * configured. + * Maximum transmit rate for this function. When specified for a PF, + * does not affect traffic from the PF's child VFs. + * A value of 0 indicates that the maximum bandwidth is not configured. */ uint32_t max_bw; /* The bandwidth value. */ @@ -11757,7 +12358,7 @@ struct hwrm_func_qcfg_output { /* Value is in Gb or GB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) - /* Value is in 1/100th of a percentage of total bandwidth. */ + /* Value is in 1/100th of a percentage of link bandwidth. */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ @@ -11926,7 +12527,94 @@ struct hwrm_func_qcfg_output { */ #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_PRIMATE_ENABLED \ UINT32_C(0x10) - uint8_t unused_2[6]; + uint8_t unused_2[3]; + /* + * Minimum guaranteed bandwidth for the network partition made up + * of the caller physical function and all its child virtual + * functions. The rate is specified as a percentage of the bandwidth + * of the link the partition is associated with. A value of 0 + * indicates that no minimum bandwidth is configured. + * The format of this field is defined to match min_bw, even though + * the partition minimum rate is always specified as a percentage. + */ + uint32_t partition_min_bw; + /* The bandwidth value. */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_SFT \ + 0 + /* + * The granularity of the value (bits or bytes). Firmware never sets + * this field. + */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_LAST \ + HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_BYTES + /* Always percentage of link bandwidth. */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Bandwidth value is in hundredths of a percent of link bandwidth. */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 + /* + * The maximum bandwidth that may be used by the network partition + * made up of the caller physical function and all its child virtual + * functions. The rate is specified as a percentage of the bandwidth + * of the link the partition is associated with. A value of 0 + * indicates that no maximum bandwidth is configured. + * The format of this field is defined to match max_bw, even though + * the partition bandwidth must be specified as a percentage. + */ + uint32_t partition_max_bw; + /* The bandwidth value. */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_SFT \ + 0 + /* + * The granularity of the value (bits or bytes). Firmware never sets + * this field. + */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_LAST \ + HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_BYTES + /* Always a percentage of link bandwidth. */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in hundredths of a percent of link bandwidth. */ + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 + /* + * The maximum transmission unit of the function + * configured by the host pf/vf. + * If the reported mtu value is non-zero then it will be used for the + * rings allocated on this function, otherwise the default + * value is used if ring MTU is not specified. + */ + uint16_t host_mtu; + uint8_t unused_3; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -11942,7 +12630,7 @@ struct hwrm_func_qcfg_output { *****************/ -/* hwrm_func_cfg_input (size:768b/96B) */ +/* hwrm_func_cfg_input (size:832b/104B) */ struct hwrm_func_cfg_input { /* The HWRM command request type. */ uint16_t req_type; @@ -12208,10 +12896,10 @@ struct hwrm_func_cfg_input { UINT32_C(0x40000000) uint32_t enables; /* - * This bit must be '1' for the mtu field to be + * This bit must be '1' for the admin_mtu field to be * configured. */ - #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU \ + #define HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_MTU \ UINT32_C(0x1) /* * This bit must be '1' for the mru field to be @@ -12364,6 +13052,33 @@ struct hwrm_func_cfg_input { #define HWRM_FUNC_CFG_INPUT_ENABLES_MPC_CHNLS \ UINT32_C(0x2000000) /* + * This bit must be '1' for the partition_min_bw field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_PARTITION_MIN_BW \ + UINT32_C(0x4000000) + /* + * This bit must be '1' for the partition_max_bw field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_PARTITION_MAX_BW \ + UINT32_C(0x8000000) + /* + * This bit must be '1' for the tpid field to be + * configured. This bit is only valid when dflt_vlan enable + * bit is set. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_TPID \ + UINT32_C(0x10000000) + /* + * This bit must be '1' for the host_mtu field to be + * configured. + */ + #define HWRM_FUNC_CFG_INPUT_ENABLES_HOST_MTU \ + UINT32_C(0x20000000) + /* + * This field can be used by the admin PF to configure + * mtu of foster PFs. * The maximum transmission unit of the function. * The HWRM should make sure that the mtu of * the function does not exceed the mtu of the physical @@ -12376,7 +13091,7 @@ struct hwrm_func_cfg_input { * The HWRM should make sure that the mtu of each transmit * ring that is assigned to a function has a valid mtu. */ - uint16_t mtu; + uint16_t admin_mtu; /* * The maximum receive unit of the function. * The HWRM should make sure that the mru of @@ -12440,9 +13155,9 @@ struct hwrm_func_cfg_input { */ uint32_t dflt_ip_addr[4]; /* - * Minimum BW allocated for this function. - * The HWRM will translate this value into byte counter and - * time interval used for the scheduler inside the device. + * Minimum guaranteed transmit bandwidth for this function. When + * specified for a PF, does not affect traffic from the PF's child VFs. + * A value of 0 indicates the minimum bandwidth is not configured. */ uint32_t min_bw; /* The bandwidth value. */ @@ -12485,9 +13200,9 @@ struct hwrm_func_cfg_input { #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID /* - * Maximum BW allocated for this function. - * The HWRM will translate this value into byte counter and - * time interval used for the scheduler inside the device. + * Maximum transmit rate for this function. When specified for a PF, + * does not affect traffic from the PF's child VFs. + * A value of 0 indicates that the maximum bandwidth is not configured. */ uint32_t max_bw; /* The bandwidth value. */ @@ -12707,7 +13422,111 @@ struct hwrm_func_cfg_input { */ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_PRIMATE_DISABLE \ UINT32_C(0x200) - uint8_t unused_0[4]; + /* + * Minimum guaranteed bandwidth for the network partition made up + * of the caller physical function and all its child virtual + * functions. The rate is specified as a percentage of the bandwidth + * of the link the partition is associated with. A value of 0 + * indicates that no minimum bandwidth is configured. The sum of the + * minimum bandwidths for all partitions on a link must not exceed + * 100%. + * The format of this field is defined to match min_bw, even though + * it does not allow all the options for min_bw at this time. + */ + uint32_t partition_min_bw; + /* The bandwidth value. */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_SFT \ + 0 + /* + * The granularity of the value (bits or bytes). Firmware ignores + * this field. + */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_LAST \ + HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_BYTES + /* Bandwidth units. Must be set to percent1_100. */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in hundredths of a percent of link bandwidth. */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_LAST \ + HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 + /* + * The maximum bandwidth that may be used by the network partition + * made up of the caller physical function and all its child virtual + * functions. The rate is specified as a percentage of the bandwidth + * of the link the partition is associated with. A value of 0 + * indicates that no maximum bandwidth is configured. + * The format of this field is defined to match max_bw, even though it + * does not allow all the options for max_bw at this time. + */ + uint32_t partition_max_bw; + /* The bandwidth value. */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_MASK \ + UINT32_C(0xfffffff) + #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_SFT \ + 0 + /* + * The granularity of the value (bits or bytes). Firmware ignores + * this field. + */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE \ + UINT32_C(0x10000000) + /* Value is in bits. */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_BITS \ + (UINT32_C(0x0) << 28) + /* Value is in bytes. */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_BYTES \ + (UINT32_C(0x1) << 28) + #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_LAST \ + HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_BYTES + /* Bandwidth units. Must be set to percent1_100. */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_MASK \ + UINT32_C(0xe0000000) + #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_SFT \ + 29 + /* Value is in hundredths of a percent of link bandwidth. */ + #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ + (UINT32_C(0x1) << 29) + #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_LAST \ + HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 + /* + * The TPID for the function for which default VLAN + * is configured. If the dflt_vlan is not specified + * with the TPID, FW returns error. If the TPID is + * not specified with dflt_vlan, the default TPID of + * 0x8100 will be used. This field is specified in + * network byte order. + */ + uint16_t tpid; + /* + * This field can be used by the host PF to configure + * mtu value. + * The maximum transmission unit of the function. + * The HWRM should make sure that the mtu of + * the function does not exceed the mtu of the physical + * port that this function is associated with. + * + * In addition to configuring mtu per function, it is + * possible to configure mtu per transmit ring. + * By default, the mtu of each transmit ring associated + * with a function is equal to the mtu of the function. + * The HWRM should make sure that the mtu of each transmit + * ring that is assigned to a function has a valid mtu. + */ + uint16_t host_mtu; } __rte_packed; /* hwrm_func_cfg_output (size:128b/16B) */ @@ -13275,6 +14094,15 @@ struct hwrm_func_drv_rgtr_input { */ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FAST_RESET_SUPPORT \ UINT32_C(0x80) + /* + * When this bit is 1, the function's driver is indicating the + * support of handling the vnic_rss_cfg's INVALID_PARAM error + * returned by firmware. Firmware returns error, if host driver + * configures the invalid hash_types bit combination for a given + * IP version. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_RSS_STRICT_HASH_TYPE_SUPPORT \ + UINT32_C(0x100) uint32_t enables; /* * This bit must be '1' for the os_type field to be @@ -14078,7 +14906,7 @@ struct hwrm_func_backing_store_qcaps_input { uint64_t resp_addr; } __rte_packed; -/* hwrm_func_backing_store_qcaps_output (size:704b/88B) */ +/* hwrm_func_backing_store_qcaps_output (size:832b/104B) */ struct hwrm_func_backing_store_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; @@ -14234,6 +15062,18 @@ struct hwrm_func_backing_store_qcaps_output { #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_MRAV \ UINT32_C(0x20) /* + * If this bit is '1' then the Tx KTLS context type should be + * initialized with the ctx_kind_initializer at the specified offset. + */ + #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_TKC \ + UINT32_C(0x40) + /* + * If this bit is '1' then the Rx KTLS context type should be + * initialized with the ctx_kind_initializer at the specified offset. + */ + #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_RKC \ + UINT32_C(0x80) + /* * Specifies the doubleword offset of ctx_kind_initializer for this * context type. */ @@ -14277,8 +15117,32 @@ struct hwrm_func_backing_store_qcaps_output { * this count in `backing_store_cfg`. */ uint8_t tqm_fp_rings_count_ext; + /* + * Specifies the doubleword offset of ctx_kind_initializer for Tx + * KTLS context type. + */ + uint8_t tkc_init_offset; + /* + * Specifies the doubleword offset of ctx_kind_initializer for Rx + * KTLS context type. + */ + uint8_t rkc_init_offset; + /* Tx KTLS context entry size in bytes. */ + uint16_t tkc_entry_size; + /* Rx KTLS context entry size in bytes. */ + uint16_t rkc_entry_size; + /* + * Maximum number of Tx KTLS context entries supported for this + * function. + */ + uint32_t tkc_max_entries; + /* + * Maximum number of Rx KTLS context entries supported for this + * function. + */ + uint32_t rkc_max_entries; /* Reserved for future. */ - uint8_t rsvd[5]; + uint8_t rsvd[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -14347,7 +15211,7 @@ struct tqm_fp_ring_cfg { *******************************/ -/* hwrm_func_backing_store_cfg_input (size:2432b/304B) */ +/* hwrm_func_backing_store_cfg_input (size:2688b/336B) */ struct hwrm_func_backing_store_cfg_input { /* The HWRM command request type. */ uint16_t req_type; @@ -14507,6 +15371,18 @@ struct hwrm_func_backing_store_cfg_input { */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING10 \ UINT32_C(0x40000) + /* + * This bit must be '1' for the Tx KTLS context + * fields to be configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TKC \ + UINT32_C(0x80000) + /* + * This bit must be '1' for the Rx KTLS context + * fields to be configured. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_RKC \ + UINT32_C(0x100000) /* QPC page size and level. */ uint8_t qpc_pg_size_qpc_lvl; /* QPC PBL indirect levels. */ @@ -15525,6 +16401,105 @@ struct hwrm_func_backing_store_cfg_input { uint32_t tqm_ring10_num_entries; /* TQM ring page directory. */ uint64_t tqm_ring10_page_dir; + /* Number of Tx KTLS context entries allocated. */ + uint32_t tkc_num_entries; + /* Number of Rx KTLS context entries allocated. */ + uint32_t rkc_num_entries; + /* Tx KTLS context page directory. */ + uint64_t tkc_page_dir; + /* Rx KTLS context page directory. */ + uint64_t rkc_page_dir; + /* Number of bytes allocated for each Tx KTLS context entry. */ + uint16_t tkc_entry_size; + /* Number of bytes allocated for each Rx KTLS context entry. */ + uint16_t rkc_entry_size; + /* Tx KTLS context page size and level. */ + uint8_t tkc_pg_size_tkc_lvl; + /* Tx KTLS context PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_1 \ + UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_2 + /* Tx KTLS context page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_1G + /* Rx KTLS context page size and level. */ + uint8_t rkc_pg_size_rkc_lvl; + /* Rx KTLS context PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_1 \ + UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing to + * PTE tables. + */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_2 + /* Rx KTLS context page size. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_1G + /* Reserved for future. */ + uint8_t rsvd[2]; } __rte_packed; /* hwrm_func_backing_store_cfg_output (size:128b/16B) */ @@ -15585,7 +16560,7 @@ struct hwrm_func_backing_store_qcfg_input { uint64_t resp_addr; } __rte_packed; -/* hwrm_func_backing_store_qcfg_output (size:2304b/288B) */ +/* hwrm_func_backing_store_qcfg_output (size:2496b/312B) */ struct hwrm_func_backing_store_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; @@ -15725,6 +16700,18 @@ struct hwrm_func_backing_store_qcfg_output { */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING10 \ UINT32_C(0x40000) + /* + * This bit must be '1' for the Tx KTLS context + * fields to be configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TKC \ + UINT32_C(0x80000) + /* + * This bit must be '1' for the Rx KTLS context + * fields to be configured. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_RKC \ + UINT32_C(0x100000) /* QPC page size and level. */ uint8_t qpc_pg_size_qpc_lvl; /* QPC PBL indirect levels. */ @@ -16621,7 +17608,103 @@ struct hwrm_func_backing_store_qcfg_output { uint32_t tqm_ring10_num_entries; /* TQM ring page directory. */ uint64_t tqm_ring10_page_dir; - uint8_t unused_1[7]; + /* Number of Tx KTLS context entries. */ + uint32_t tkc_num_entries; + /* Number of Rx KTLS context entries. */ + uint32_t rkc_num_entries; + /* Tx KTLS context page directory. */ + uint64_t tkc_page_dir; + /* Rx KTLS context page directory. */ + uint64_t rkc_page_dir; + /* Tx KTLS context page size and level. */ + uint8_t tkc_pg_size_tkc_lvl; + /* Tx KTLS context PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_1 \ + UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing to + * PTE tables. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_2 + /* Tx KTLS context page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_1G + /* Rx KTLS context page size and level. */ + uint8_t rkc_pg_size_rkc_lvl; + /* Rx KTLS context PBL indirect levels. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_MASK \ + UINT32_C(0xf) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_SFT 0 + /* PBL pointer is physical start address. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_0 \ + UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_1 \ + UINT32_C(0x1) + /* + * PBL pointer points to PDE table with each entry pointing to + * PTE tables. + */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_2 \ + UINT32_C(0x2) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_2 + /* Rx KTLS context page size. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_MASK \ + UINT32_C(0xf0) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_SFT 4 + /* 4KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_4K \ + (UINT32_C(0x0) << 4) + /* 8KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_8K \ + (UINT32_C(0x1) << 4) + /* 64KB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_64K \ + (UINT32_C(0x2) << 4) + /* 2MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_2M \ + (UINT32_C(0x3) << 4) + /* 8MB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_8M \ + (UINT32_C(0x4) << 4) + /* 1GB. */ + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_1G \ + (UINT32_C(0x5) << 4) + #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_LAST \ + HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_1G + uint8_t unused_1[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as 1 @@ -31644,7 +32727,7 @@ struct hwrm_ring_alloc_output { ******************/ -/* hwrm_ring_free_input (size:192b/24B) */ +/* hwrm_ring_free_input (size:256b/32B) */ struct hwrm_ring_free_input { /* The HWRM command request type. */ uint16_t req_type; @@ -31690,10 +32773,37 @@ struct hwrm_ring_free_input { #define HWRM_RING_FREE_INPUT_RING_TYPE_NQ UINT32_C(0x5) #define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \ HWRM_RING_FREE_INPUT_RING_TYPE_NQ - uint8_t unused_0; + uint8_t flags; + /* + * If this bit is set to '1', ring_id in this command belongs to + * virtio function. prod_idx in this command corresponds to doorbell + * producer index. opaque field in this command needs to be inserted + * by firmware in VEE_FLUSH completion record. + * Firmware will poll the corresponding ring context to reach the + * given producer index before sending successful response. It will + * finish the completion using VEE_FLUSH completion record. + * + * If this bit is '0', firmware will not treat ring_id as virtio + * ring and ignore prod_idx, opaque fields. + * + * This feature is not applicable for L2 or RoCE. + */ + #define HWRM_RING_FREE_INPUT_FLAGS_VIRTIO_RING_VALID UINT32_C(0x1) + #define HWRM_RING_FREE_INPUT_FLAGS_LAST \ + HWRM_RING_FREE_INPUT_FLAGS_VIRTIO_RING_VALID /* Physical number of ring allocated. */ uint16_t ring_id; - uint8_t unused_1[4]; + /* + * Ring BD producer index posted by the virtio block. + * This field is valid if virtio_ring_valid flag is set. + */ + uint32_t prod_idx; + /* + * User defined opaque field to be inserted into VEE_FLUSH completion + * record. This field is valid if virtio_ring_valid flag is set. + */ + uint32_t opaque; + uint32_t unused_1; } __rte_packed; /* hwrm_ring_free_output (size:128b/16B) */ @@ -41858,6 +42968,12 @@ struct hwrm_cfa_adv_flow_mgnt_qcaps_output { */ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_L2_FILTER_TRAFFIC_TYPE_L2_ROCE_SUPPORTED \ UINT32_C(0x10000) + /* + * If set to 1, firmware is capable of HW LAG. This bit is only + * advertised if the calling function is a PAXC function. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_LAG_SUPPORTED \ + UINT32_C(0x20000) uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output -- 2.10.1