This patch introduce 'dmadevice' which is a generic type of DMA device. The APIs of dmadev library exposes some generic operations which can enable configuration and I/O with the DMA devices.
Signed-off-by: Chengwen Feng <fengcheng...@huawei.com> --- v8: * fix pcie access port diagram doxygen problem. * fix typo. * fix compile warning when enable DMADEV_DEBUG. v7: * add rte_dmadev_get_dev_id API. * fix typo. * use the default macro assignment scheme. * rename RTE_DMA_DEV_CAPA_* to RTE_DMADEV_CAPA_*. * rename rte_dmadev_conf.silent_mode to enable_silent. * add memset when get stats. v6: * delete fence capability. * delete vchan_release ops. * copy_sg direct use src/dst/nb_src/nb_dst as paramter. * define rte_dma_direction, don't support multiple direction in the same vchan. * fix segment fault when allocate. * fix typo. * fix comments format. v5: * add doxy-api-* file modify. * use RTE_LOG_REGISTER_DEFAULT. * fix typo. * resolve some incorrect comments. * fix some doxgen problem. * fix version.map still hold rte_dmadev_completed_fails. v4: * replace xxx_complete_fails with xxx_completed_status. * add SILENT capability, also a silent_mode in rte_dmadev_conf. * add op_flag_llc for performance. * rename dmadev_xxx_t to rte_dmadev_xxx_t to avoid namespace conflict. * delete filed 'enqueued_count' from rte_dmadev_stats. * make rte_dmadev hold 'dev_private' filed. * add RTE_DMA_STATUS_NOT_ATTEMPED status code. * rename RTE_DMA_STATUS_ACTIVE_DROP to RTE_DMA_STATUS_USER_ABORT. * rename rte_dma_sg(e) to rte_dmadev_sg(e) to make sure all struct prefix with rte_dmadev. * put the comment afterwards. * fix some doxgen problem. * delete macro RTE_DMADEV_VALID_DEV_ID_OR_RET and RTE_DMADEV_PTR_OR_ERR_RET. * replace strlcpy with rte_strscpy. * other minor modifications from review comment. v3: * rm reset and fill_sg ops. * rm MT-safe capabilities. * add submit flag. * redefine rte_dma_sg to implement asymmetric copy. * delete some reserved field for future use. * rearrangement rte_dmadev/rte_dmadev_data struct. * refresh rte_dmadev.h copyright. * update vchan setup parameter. * modified some inappropriate descriptions. * arrange version.map alphabetically. * other minor modifications from review comment. --- MAINTAINERS | 4 + config/rte_config.h | 3 + doc/api/doxy-api-index.md | 1 + doc/api/doxy-api.conf.in | 1 + lib/dmadev/meson.build | 7 + lib/dmadev/rte_dmadev.c | 545 ++++++++++++++++++++++ lib/dmadev/rte_dmadev.h | 1041 ++++++++++++++++++++++++++++++++++++++++++ lib/dmadev/rte_dmadev_core.h | 182 ++++++++ lib/dmadev/rte_dmadev_pmd.h | 72 +++ lib/dmadev/version.map | 37 ++ lib/meson.build | 1 + 11 files changed, 1894 insertions(+) create mode 100644 lib/dmadev/meson.build create mode 100644 lib/dmadev/rte_dmadev.c create mode 100644 lib/dmadev/rte_dmadev.h create mode 100644 lib/dmadev/rte_dmadev_core.h create mode 100644 lib/dmadev/rte_dmadev_pmd.h create mode 100644 lib/dmadev/version.map diff --git a/MAINTAINERS b/MAINTAINERS index af2a91d..e01a07f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -495,6 +495,10 @@ F: drivers/raw/skeleton/ F: app/test/test_rawdev.c F: doc/guides/prog_guide/rawdev.rst +DMA device API - EXPERIMENTAL +M: Chengwen Feng <fengcheng...@huawei.com> +F: lib/dmadev/ + Memory Pool Drivers ------------------- diff --git a/config/rte_config.h b/config/rte_config.h index 590903c..331a431 100644 --- a/config/rte_config.h +++ b/config/rte_config.h @@ -81,6 +81,9 @@ /* rawdev defines */ #define RTE_RAWDEV_MAX_DEVS 64 +/* dmadev defines */ +#define RTE_DMADEV_MAX_DEVS 64 + /* ip_fragmentation defines */ #define RTE_LIBRTE_IP_FRAG_MAX_FRAG 4 #undef RTE_LIBRTE_IP_FRAG_TBL_STAT diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md index 1992107..ce08250 100644 --- a/doc/api/doxy-api-index.md +++ b/doc/api/doxy-api-index.md @@ -27,6 +27,7 @@ The public API headers are grouped by topics: [event_timer_adapter] (@ref rte_event_timer_adapter.h), [event_crypto_adapter] (@ref rte_event_crypto_adapter.h), [rawdev] (@ref rte_rawdev.h), + [dmadev] (@ref rte_dmadev.h), [metrics] (@ref rte_metrics.h), [bitrate] (@ref rte_bitrate.h), [latency] (@ref rte_latencystats.h), diff --git a/doc/api/doxy-api.conf.in b/doc/api/doxy-api.conf.in index 325a019..109ec1f 100644 --- a/doc/api/doxy-api.conf.in +++ b/doc/api/doxy-api.conf.in @@ -35,6 +35,7 @@ INPUT = @TOPDIR@/doc/api/doxy-api-index.md \ @TOPDIR@/lib/compressdev \ @TOPDIR@/lib/cryptodev \ @TOPDIR@/lib/distributor \ + @TOPDIR@/lib/dmadev \ @TOPDIR@/lib/efd \ @TOPDIR@/lib/ethdev \ @TOPDIR@/lib/eventdev \ diff --git a/lib/dmadev/meson.build b/lib/dmadev/meson.build new file mode 100644 index 0000000..d2fc85e --- /dev/null +++ b/lib/dmadev/meson.build @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2021 HiSilicon Limited. + +sources = files('rte_dmadev.c') +headers = files('rte_dmadev.h') +indirect_headers += files('rte_dmadev_core.h') +driver_sdk_headers += files('rte_dmadev_pmd.h') diff --git a/lib/dmadev/rte_dmadev.c b/lib/dmadev/rte_dmadev.c new file mode 100644 index 0000000..a6d8e3be --- /dev/null +++ b/lib/dmadev/rte_dmadev.c @@ -0,0 +1,545 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2021 HiSilicon Limited. + * Copyright(c) 2021 Intel Corporation. + */ + +#include <ctype.h> +#include <inttypes.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +#include <rte_debug.h> +#include <rte_dev.h> +#include <rte_eal.h> +#include <rte_errno.h> +#include <rte_lcore.h> +#include <rte_log.h> +#include <rte_memory.h> +#include <rte_memzone.h> +#include <rte_malloc.h> +#include <rte_string_fns.h> + +#include "rte_dmadev.h" +#include "rte_dmadev_pmd.h" + +struct rte_dmadev rte_dmadevices[RTE_DMADEV_MAX_DEVS]; + +static const char *MZ_RTE_DMADEV_DATA = "rte_dmadev_data"; +/* Shared memory between primary and secondary processes. */ +static struct { + struct rte_dmadev_data data[RTE_DMADEV_MAX_DEVS]; +} *dmadev_shared_data; + +RTE_LOG_REGISTER_DEFAULT(rte_dmadev_logtype, INFO); +#define RTE_DMADEV_LOG(level, ...) \ + rte_log(RTE_LOG_ ## level, rte_dmadev_logtype, "" __VA_ARGS__) + +/* Macros to check for valid device id */ +#define RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, retval) do { \ + if (!rte_dmadev_is_valid_dev(dev_id)) { \ + RTE_DMADEV_LOG(ERR, "Invalid dev_id=%u\n", dev_id); \ + return retval; \ + } \ +} while (0) + +static int +dmadev_check_name(const char *name) +{ + size_t name_len; + + if (name == NULL) { + RTE_DMADEV_LOG(ERR, "Name can't be NULL\n"); + return -EINVAL; + } + + name_len = strnlen(name, RTE_DMADEV_NAME_MAX_LEN); + if (name_len == 0) { + RTE_DMADEV_LOG(ERR, "Zero length DMA device name\n"); + return -EINVAL; + } + if (name_len >= RTE_DMADEV_NAME_MAX_LEN) { + RTE_DMADEV_LOG(ERR, "DMA device name is too long\n"); + return -EINVAL; + } + + return 0; +} + +static uint16_t +dmadev_find_free_dev(void) +{ + uint16_t i; + + for (i = 0; i < RTE_DMADEV_MAX_DEVS; i++) { + if (dmadev_shared_data->data[i].dev_name[0] == '\0') { + RTE_ASSERT(rte_dmadevices[i].state == + RTE_DMADEV_UNUSED); + return i; + } + } + + return RTE_DMADEV_MAX_DEVS; +} + +static struct rte_dmadev* +dmadev_find(const char *name) +{ + uint16_t i; + + for (i = 0; i < RTE_DMADEV_MAX_DEVS; i++) { + if ((rte_dmadevices[i].state == RTE_DMADEV_ATTACHED) && + (!strcmp(name, rte_dmadevices[i].data->dev_name))) + return &rte_dmadevices[i]; + } + + return NULL; +} + +static int +dmadev_shared_data_prepare(void) +{ + const struct rte_memzone *mz; + + if (dmadev_shared_data == NULL) { + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + /* Allocate port data and ownership shared memory. */ + mz = rte_memzone_reserve(MZ_RTE_DMADEV_DATA, + sizeof(*dmadev_shared_data), + rte_socket_id(), 0); + } else + mz = rte_memzone_lookup(MZ_RTE_DMADEV_DATA); + if (mz == NULL) + return -ENOMEM; + + dmadev_shared_data = mz->addr; + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + memset(dmadev_shared_data->data, 0, + sizeof(dmadev_shared_data->data)); + } + + return 0; +} + +static struct rte_dmadev * +dmadev_allocate(const char *name) +{ + struct rte_dmadev *dev; + uint16_t dev_id; + + dev = dmadev_find(name); + if (dev != NULL) { + RTE_DMADEV_LOG(ERR, "DMA device already allocated\n"); + return NULL; + } + + if (dmadev_shared_data_prepare() != 0) { + RTE_DMADEV_LOG(ERR, "Cannot allocate DMA shared data\n"); + return NULL; + } + + dev_id = dmadev_find_free_dev(); + if (dev_id == RTE_DMADEV_MAX_DEVS) { + RTE_DMADEV_LOG(ERR, "Reached maximum number of DMA devices\n"); + return NULL; + } + + dev = &rte_dmadevices[dev_id]; + dev->data = &dmadev_shared_data->data[dev_id]; + dev->data->dev_id = dev_id; + rte_strscpy(dev->data->dev_name, name, sizeof(dev->data->dev_name)); + + return dev; +} + +static struct rte_dmadev * +dmadev_attach_secondary(const char *name) +{ + struct rte_dmadev *dev; + uint16_t i; + + if (dmadev_shared_data_prepare() != 0) { + RTE_DMADEV_LOG(ERR, "Cannot allocate DMA shared data\n"); + return NULL; + } + + for (i = 0; i < RTE_DMADEV_MAX_DEVS; i++) { + if (!strcmp(dmadev_shared_data->data[i].dev_name, name)) + break; + } + if (i == RTE_DMADEV_MAX_DEVS) { + RTE_DMADEV_LOG(ERR, + "Device %s is not driven by the primary process\n", + name); + return NULL; + } + + dev = &rte_dmadevices[i]; + dev->data = &dmadev_shared_data->data[i]; + RTE_ASSERT(dev->data->dev_id == i); + dev->dev_private = dev->data->dev_private; + + return dev; +} + +struct rte_dmadev * +rte_dmadev_pmd_allocate(const char *name) +{ + struct rte_dmadev *dev; + + if (dmadev_check_name(name) != 0) + return NULL; + + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + dev = dmadev_allocate(name); + else + dev = dmadev_attach_secondary(name); + + if (dev == NULL) + return NULL; + dev->state = RTE_DMADEV_ATTACHED; + + return dev; +} + +int +rte_dmadev_pmd_release(struct rte_dmadev *dev) +{ + void *dev_private_bak; + + if (dev == NULL) + return -EINVAL; + + if (dev->state == RTE_DMADEV_UNUSED) + return 0; + + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + memset(dev->data, 0, sizeof(struct rte_dmadev_data)); + + dev_private_bak = dev->dev_private; + memset(dev, 0, sizeof(struct rte_dmadev)); + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + dev->dev_private = dev_private_bak; + dev->state = RTE_DMADEV_UNUSED; + + return 0; +} + +struct rte_dmadev * +rte_dmadev_get_device_by_name(const char *name) +{ + if (dmadev_check_name(name) != 0) + return NULL; + return dmadev_find(name); +} + +int +rte_dmadev_get_dev_id(const char *name) +{ + struct rte_dmadev *dev = rte_dmadev_get_device_by_name(name); + if (dev != NULL) + return dev->data->dev_id; + return -EINVAL; +} + +bool +rte_dmadev_is_valid_dev(uint16_t dev_id) +{ + return (dev_id < RTE_DMADEV_MAX_DEVS) && + rte_dmadevices[dev_id].state == RTE_DMADEV_ATTACHED; +} + +uint16_t +rte_dmadev_count(void) +{ + uint16_t count = 0; + uint16_t i; + + for (i = 0; i < RTE_DMADEV_MAX_DEVS; i++) { + if (rte_dmadevices[i].state == RTE_DMADEV_ATTACHED) + count++; + } + + return count; +} + +int +rte_dmadev_info_get(uint16_t dev_id, struct rte_dmadev_info *dev_info) +{ + const struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + int ret; + + RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL); + if (dev_info == NULL) + return -EINVAL; + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_info_get, -ENOTSUP); + memset(dev_info, 0, sizeof(struct rte_dmadev_info)); + ret = (*dev->dev_ops->dev_info_get)(dev, dev_info, + sizeof(struct rte_dmadev_info)); + if (ret != 0) + return ret; + + dev_info->device = dev->device; + dev_info->nb_vchans = dev->data->dev_conf.max_vchans; + + return 0; +} + +int +rte_dmadev_configure(uint16_t dev_id, const struct rte_dmadev_conf *dev_conf) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + struct rte_dmadev_info info; + int ret; + + RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL); + if (dev_conf == NULL) + return -EINVAL; + + ret = rte_dmadev_info_get(dev_id, &info); + if (ret != 0) { + RTE_DMADEV_LOG(ERR, "Device %u get device info fail\n", dev_id); + return -EINVAL; + } + if (dev_conf->max_vchans == 0) { + RTE_DMADEV_LOG(ERR, + "Device %u configure zero vchans\n", dev_id); + return -EINVAL; + } + if (dev_conf->max_vchans > info.max_vchans) { + RTE_DMADEV_LOG(ERR, + "Device %u configure too many vchans\n", dev_id); + return -EINVAL; + } + if (dev_conf->enable_silent && + !(info.dev_capa & RTE_DMADEV_CAPA_SILENT)) { + RTE_DMADEV_LOG(ERR, "Device %u don't support silent\n", dev_id); + return -EINVAL; + } + + if (dev->data->dev_started != 0) { + RTE_DMADEV_LOG(ERR, + "Device %u must be stopped to allow configuration\n", + dev_id); + return -EBUSY; + } + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -ENOTSUP); + ret = (*dev->dev_ops->dev_configure)(dev, dev_conf); + if (ret == 0) + memcpy(&dev->data->dev_conf, dev_conf, sizeof(*dev_conf)); + + return ret; +} + +int +rte_dmadev_start(uint16_t dev_id) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + int ret; + + RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL); + + if (dev->data->dev_started != 0) { + RTE_DMADEV_LOG(WARNING, "Device %u already started\n", dev_id); + return 0; + } + + if (dev->dev_ops->dev_start == NULL) + goto mark_started; + + ret = (*dev->dev_ops->dev_start)(dev); + if (ret != 0) + return ret; + +mark_started: + dev->data->dev_started = 1; + return 0; +} + +int +rte_dmadev_stop(uint16_t dev_id) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + int ret; + + RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL); + + if (dev->data->dev_started == 0) { + RTE_DMADEV_LOG(WARNING, "Device %u already stopped\n", dev_id); + return 0; + } + + if (dev->dev_ops->dev_stop == NULL) + goto mark_stopped; + + ret = (*dev->dev_ops->dev_stop)(dev); + if (ret != 0) + return ret; + +mark_stopped: + dev->data->dev_started = 0; + return 0; +} + +int +rte_dmadev_close(uint16_t dev_id) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + + RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL); + + /* Device must be stopped before it can be closed */ + if (dev->data->dev_started == 1) { + RTE_DMADEV_LOG(ERR, + "Device %u must be stopped before closing\n", dev_id); + return -EBUSY; + } + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_close, -ENOTSUP); + return (*dev->dev_ops->dev_close)(dev); +} + +int +rte_dmadev_vchan_setup(uint16_t dev_id, + const struct rte_dmadev_vchan_conf *conf) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + struct rte_dmadev_info info; + int ret; + + RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL); + if (conf == NULL) + return -EINVAL; + + dev = &rte_dmadevices[dev_id]; + + ret = rte_dmadev_info_get(dev_id, &info); + if (ret != 0) { + RTE_DMADEV_LOG(ERR, "Device %u get device info fail\n", dev_id); + return -EINVAL; + } + if (conf->direction != RTE_DMA_DIR_MEM_TO_MEM && + conf->direction != RTE_DMA_DIR_MEM_TO_DEV && + conf->direction != RTE_DMA_DIR_DEV_TO_MEM && + conf->direction != RTE_DMA_DIR_DEV_TO_DEV) { + RTE_DMADEV_LOG(ERR, "Device %u direction invalid!\n", dev_id); + return -EINVAL; + } + if (conf->direction == RTE_DMA_DIR_MEM_TO_MEM && + !(info.dev_capa & RTE_DMADEV_CAPA_MEM_TO_MEM)) { + RTE_DMADEV_LOG(ERR, + "Device %u don't support mem2mem transfer\n", dev_id); + return -EINVAL; + } + if (conf->direction == RTE_DMA_DIR_MEM_TO_DEV && + !(info.dev_capa & RTE_DMADEV_CAPA_MEM_TO_DEV)) { + RTE_DMADEV_LOG(ERR, + "Device %u don't support mem2dev transfer\n", dev_id); + return -EINVAL; + } + if (conf->direction == RTE_DMA_DIR_DEV_TO_MEM && + !(info.dev_capa & RTE_DMADEV_CAPA_DEV_TO_MEM)) { + RTE_DMADEV_LOG(ERR, + "Device %u don't support dev2mem transfer\n", dev_id); + return -EINVAL; + } + if (conf->direction == RTE_DMA_DIR_DEV_TO_DEV && + !(info.dev_capa & RTE_DMADEV_CAPA_DEV_TO_DEV)) { + RTE_DMADEV_LOG(ERR, + "Device %u don't support dev2dev transfer\n", dev_id); + return -EINVAL; + } + if (conf->nb_desc < info.min_desc || conf->nb_desc > info.max_desc) { + RTE_DMADEV_LOG(ERR, + "Device %u number of descriptors invalid\n", dev_id); + return -EINVAL; + } + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vchan_setup, -ENOTSUP); + return (*dev->dev_ops->vchan_setup)(dev, conf); +} + +int +rte_dmadev_stats_get(uint16_t dev_id, uint16_t vchan, + struct rte_dmadev_stats *stats) +{ + const struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + + RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL); + if (stats == NULL) + return -EINVAL; + if (vchan >= dev->data->dev_conf.max_vchans && + vchan != RTE_DMADEV_ALL_VCHAN) { + RTE_DMADEV_LOG(ERR, + "Device %u vchan %u out of range\n", dev_id, vchan); + return -EINVAL; + } + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->stats_get, -ENOTSUP); + memset(stats, 0, sizeof(struct rte_dmadev_stats)); + return (*dev->dev_ops->stats_get)(dev, vchan, stats, + sizeof(struct rte_dmadev_stats)); +} + +int +rte_dmadev_stats_reset(uint16_t dev_id, uint16_t vchan) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + + RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL); + if (vchan >= dev->data->dev_conf.max_vchans && + vchan != RTE_DMADEV_ALL_VCHAN) { + RTE_DMADEV_LOG(ERR, + "Device %u vchan %u out of range\n", dev_id, vchan); + return -EINVAL; + } + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->stats_reset, -ENOTSUP); + return (*dev->dev_ops->stats_reset)(dev, vchan); +} + +int +rte_dmadev_dump(uint16_t dev_id, FILE *f) +{ + const struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + struct rte_dmadev_info info; + int ret; + + RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL); + if (f == NULL) + return -EINVAL; + + ret = rte_dmadev_info_get(dev_id, &info); + if (ret != 0) { + RTE_DMADEV_LOG(ERR, "Device %u get device info fail\n", dev_id); + return -EINVAL; + } + + fprintf(f, "DMA Dev %u, '%s' [%s]\n", + dev->data->dev_id, + dev->data->dev_name, + dev->data->dev_started ? "started" : "stopped"); + fprintf(f, " dev_capa: 0x%" PRIx64 "\n", info.dev_capa); + fprintf(f, " max_vchans_supported: %u\n", info.max_vchans); + fprintf(f, " max_vchans_configured: %u\n", info.nb_vchans); + fprintf(f, " silent_mode: %s\n", + dev->data->dev_conf.enable_silent ? "on" : "off"); + + if (dev->dev_ops->dev_dump != NULL) + return (*dev->dev_ops->dev_dump)(dev, f); + + return 0; +} + +int +rte_dmadev_selftest(uint16_t dev_id) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + + RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL); + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_selftest, -ENOTSUP); + return (*dev->dev_ops->dev_selftest)(dev_id); +} diff --git a/lib/dmadev/rte_dmadev.h b/lib/dmadev/rte_dmadev.h new file mode 100644 index 0000000..53d85f1 --- /dev/null +++ b/lib/dmadev/rte_dmadev.h @@ -0,0 +1,1041 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2021 HiSilicon Limited. + * Copyright(c) 2021 Intel Corporation. + * Copyright(c) 2021 Marvell International Ltd. + * Copyright(c) 2021 SmartShare Systems. + */ + +#ifndef _RTE_DMADEV_H_ +#define _RTE_DMADEV_H_ + +/** + * @file rte_dmadev.h + * + * RTE DMA (Direct Memory Access) device APIs. + * + * The DMA framework is built on the following model: + * + * --------------- --------------- --------------- + * | virtual DMA | | virtual DMA | | virtual DMA | + * | channel | | channel | | channel | + * --------------- --------------- --------------- + * | | | + * ------------------ | + * | | + * ------------ ------------ + * | dmadev | | dmadev | + * ------------ ------------ + * | | + * ------------------ ------------------ + * | HW-DMA-channel | | HW-DMA-channel | + * ------------------ ------------------ + * | | + * -------------------------------- + * | + * --------------------- + * | HW-DMA-Controller | + * --------------------- + * + * The DMA controller could have multiple HW-DMA-channels (aka. HW-DMA-queues), + * each HW-DMA-channel should be represented by a dmadev. + * + * The dmadev could create multiple virtual DMA channels, each virtual DMA + * channel represents a different transfer context. The DMA operation request + * must be submitted to the virtual DMA channel. e.g. Application could create + * virtual DMA channel 0 for memory-to-memory transfer scenario, and create + * virtual DMA channel 1 for memory-to-device transfer scenario. + * + * The dmadev are dynamically allocated by rte_dmadev_pmd_allocate() during the + * PCI/SoC device probing phase performed at EAL initialization time. And could + * be released by rte_dmadev_pmd_release() during the PCI/SoC device removing + * phase. + * + * This framework uses 'uint16_t dev_id' as the device identifier of a dmadev, + * and 'uint16_t vchan' as the virtual DMA channel identifier in one dmadev. + * + * The functions exported by the dmadev API to setup a device designated by its + * device identifier must be invoked in the following order: + * - rte_dmadev_configure() + * - rte_dmadev_vchan_setup() + * - rte_dmadev_start() + * + * Then, the application can invoke dataplane APIs to process jobs. + * + * If the application wants to change the configuration (i.e. invoke + * rte_dmadev_configure() or rte_dmadev_vchan_setup()), it must invoke + * rte_dmadev_stop() first to stop the device and then do the reconfiguration + * before invoking rte_dmadev_start() again. The dataplane APIs should not be + * invoked when the device is stopped. + * + * Finally, an application can close a dmadev by invoking the + * rte_dmadev_close() function. + * + * The dataplane APIs include two parts: + * The first part is the submission of operation requests: + * - rte_dmadev_copy() + * - rte_dmadev_copy_sg() + * - rte_dmadev_fill() + * - rte_dmadev_submit() + * + * These APIs could work with different virtual DMA channels which have + * different contexts. + * + * The first three APIs are used to submit the operation request to the virtual + * DMA channel, if the submission is successful, a uint16_t ring_idx is + * returned, otherwise a negative number is returned. + * + * The last API was used to issue doorbell to hardware, and also there are flags + * (@see RTE_DMA_OP_FLAG_SUBMIT) parameter of the first three APIs could do the + * same work. + * + * The second part is to obtain the result of requests: + * - rte_dmadev_completed() + * - return the number of operation requests completed successfully. + * - rte_dmadev_completed_status() + * - return the number of operation requests completed. + * + * @note If the dmadev works in silent mode (@see RTE_DMADEV_CAPA_SILENT), + * application does not invoke the above two completed APIs. + * + * About the ring_idx which enqueue APIs (e.g. rte_dmadev_copy() + * rte_dmadev_fill()) returned, the rules are as follows: + * - ring_idx for each virtual DMA channel are independent. + * - For a virtual DMA channel, the ring_idx is monotonically incremented, + * when it reach UINT16_MAX, it wraps back to zero. + * - This ring_idx can be used by applications to track per-operation + * metadata in an application-defined circular ring. + * - The initial ring_idx of a virtual DMA channel is zero, after the + * device is stopped, the ring_idx needs to be reset to zero. + * + * One example: + * - step-1: start one dmadev + * - step-2: enqueue a copy operation, the ring_idx return is 0 + * - step-3: enqueue a copy operation again, the ring_idx return is 1 + * - ... + * - step-101: stop the dmadev + * - step-102: start the dmadev + * - step-103: enqueue a copy operation, the cookie return is 0 + * - ... + * - step-x+0: enqueue a fill operation, the ring_idx return is 65535 + * - step-x+1: enqueue a copy operation, the ring_idx return is 0 + * - ... + * + * The DMA operation address used in enqueue APIs (i.e. rte_dmadev_copy(), + * rte_dmadev_copy_sg(), rte_dmadev_fill()) defined as rte_iova_t type. The + * dmadev supports two types of address: memory address and device address. + * + * - memory address: the source and destination address of the memory-to-memory + * transfer type, or the source address of the memory-to-device transfer type, + * or the destination address of the device-to-memory transfer type. + * @note If the device support SVA (@see RTE_DMADEV_CAPA_SVA), the memory + * address can be any VA address, otherwise it must be an IOVA address. + * + * - device address: the source and destination address of the device-to-device + * transfer type, or the source address of the device-to-memory transfer type, + * or the destination address of the memory-to-device transfer type. + * + * By default, all the functions of the dmadev API exported by a PMD are + * lock-free functions which assume to not be invoked in parallel on different + * logical cores to work on the same target dmadev object. + * @note Different virtual DMA channels on the same dmadev *DO NOT* support + * parallel invocation because these virtual DMA channels share the same + * HW-DMA-channel. + * + */ + +#include <rte_common.h> +#include <rte_compat.h> +#include <rte_dev.h> +#include <rte_errno.h> +#include <rte_memory.h> + +#ifdef __cplusplus +extern "C" { +#endif + +#define RTE_DMADEV_NAME_MAX_LEN RTE_DEV_NAME_MAX_LEN + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Get the device identifier for the named DMA device. + * + * @param name + * DMA device name. + * + * @return + * Returns DMA device identifier on success. + * - <0: Failure to find named DMA device. + */ +__rte_experimental +int +rte_dmadev_get_dev_id(const char *name); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * @param dev_id + * DMA device index. + * + * @return + * - If the device index is valid (true) or not (false). + */ +__rte_experimental +bool +rte_dmadev_is_valid_dev(uint16_t dev_id); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Get the total number of DMA devices that have been successfully + * initialised. + * + * @return + * The total number of usable DMA devices. + */ +__rte_experimental +uint16_t +rte_dmadev_count(void); + +/* Enumerates DMA device capabilities. */ +#define RTE_DMADEV_CAPA_MEM_TO_MEM (1ull << 0) +/**< DMA device support memory-to-memory transfer. + * + * @see struct rte_dmadev_info::dev_capa + */ + +#define RTE_DMADEV_CAPA_MEM_TO_DEV (1ull << 1) +/**< DMA device support memory-to-device transfer. + * + * @see struct rte_dmadev_info::dev_capa + * @see struct rte_dmadev_port_param::port_type + */ + +#define RTE_DMADEV_CAPA_DEV_TO_MEM (1ull << 2) +/**< DMA device support device-to-memory transfer. + * + * @see struct rte_dmadev_info::dev_capa + * @see struct rte_dmadev_port_param::port_type + */ + +#define RTE_DMADEV_CAPA_DEV_TO_DEV (1ull << 3) +/**< DMA device support device-to-device transfer. + * + * @see struct rte_dmadev_info::dev_capa + * @see struct rte_dmadev_port_param::port_type + */ + +#define RTE_DMADEV_CAPA_SVA (1ull << 4) +/**< DMA device support SVA which could use VA as DMA address. + * If device support SVA then application could pass any VA address like memory + * from rte_malloc(), rte_memzone(), malloc, stack memory. + * If device don't support SVA, then application should pass IOVA address which + * from rte_malloc(), rte_memzone(). + * + * @see struct rte_dmadev_info::dev_capa + */ + +#define RTE_DMADEV_CAPA_SILENT (1ull << 5) +/**< DMA device support work in silent mode. + * In this mode, application don't required to invoke rte_dmadev_completed*() + * API. + * + * @see struct rte_dmadev_conf::silent_mode + */ + +#define RTE_DMADEV_CAPA_OPS_COPY (1ull << 32) +/**< DMA device support copy ops. + * This capability start with index of 32, so that it could leave gap between + * normal capability and ops capability. + * + * @see struct rte_dmadev_info::dev_capa + */ + +#define RTE_DMADEV_CAPA_OPS_COPY_SG (1ull << 33) +/**< DMA device support scatter-list copy ops. + * + * @see struct rte_dmadev_info::dev_capa + */ + +#define RTE_DMADEV_CAPA_OPS_FILL (1ull << 34) +/**< DMA device support fill ops. + * + * @see struct rte_dmadev_info::dev_capa + */ + +/** + * A structure used to retrieve the information of a DMA device. + */ +struct rte_dmadev_info { + struct rte_device *device; /**< Generic Device information. */ + uint64_t dev_capa; /**< Device capabilities (RTE_DMADEV_CAPA_*). */ + uint16_t max_vchans; + /**< Maximum number of virtual DMA channels supported. */ + uint16_t max_desc; + /**< Maximum allowed number of virtual DMA channel descriptors. */ + uint16_t min_desc; + /**< Minimum allowed number of virtual DMA channel descriptors. */ + uint16_t nb_vchans; /**< Number of virtual DMA channel configured. */ +}; + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Retrieve information of a DMA device. + * + * @param dev_id + * The identifier of the device. + * @param[out] dev_info + * A pointer to a structure of type *rte_dmadev_info* to be filled with the + * information of the device. + * + * @return + * - =0: Success, driver updates the information of the DMA device. + * - <0: Error code returned by the driver info get function. + * + */ +__rte_experimental +int +rte_dmadev_info_get(uint16_t dev_id, struct rte_dmadev_info *dev_info); + +/** + * A structure used to configure a DMA device. + */ +struct rte_dmadev_conf { + uint16_t max_vchans; + /**< Maximum number of virtual DMA channel to use. + * This value cannot be greater than the field 'max_vchans' of struct + * rte_dmadev_info which get from rte_dmadev_info_get(). + */ + bool enable_silent; + /**< Indicates whether to enable silent mode. + * false-default mode, true-silent mode. + * This value can be set to true only when the SILENT capability is + * supported. + * + * @see RTE_DMADEV_CAPA_SILENT + */ +}; + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Configure a DMA device. + * + * This function must be invoked first before any other function in the + * API. This function can also be re-invoked when a device is in the + * stopped state. + * + * @param dev_id + * The identifier of the device to configure. + * @param dev_conf + * The DMA device configuration structure encapsulated into rte_dmadev_conf + * object. + * + * @return + * - =0: Success, device configured. + * - <0: Error code returned by the driver configuration function. + */ +__rte_experimental +int +rte_dmadev_configure(uint16_t dev_id, const struct rte_dmadev_conf *dev_conf); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Start a DMA device. + * + * The device start step is the last one and consists of setting the DMA + * to start accepting jobs. + * + * @param dev_id + * The identifier of the device. + * + * @return + * - =0: Success, device started. + * - <0: Error code returned by the driver start function. + */ +__rte_experimental +int +rte_dmadev_start(uint16_t dev_id); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Stop a DMA device. + * + * The device can be restarted with a call to rte_dmadev_start(). + * + * @param dev_id + * The identifier of the device. + * + * @return + * - =0: Success, device stopped. + * - <0: Error code returned by the driver stop function. + */ +__rte_experimental +int +rte_dmadev_stop(uint16_t dev_id); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Close a DMA device. + * + * The device cannot be restarted after this call. + * + * @param dev_id + * The identifier of the device. + * + * @return + * - =0: Successfully close device + * - <0: Failure to close device + */ +__rte_experimental +int +rte_dmadev_close(uint16_t dev_id); + +/** + * rte_dma_direction - DMA transfer direction defines. + */ +enum rte_dma_direction { + RTE_DMA_DIR_MEM_TO_MEM, + /**< DMA transfer direction - from memory to memory. + * + * @see struct rte_dmadev_vchan_conf::direction + */ + RTE_DMA_DIR_MEM_TO_DEV, + /**< DMA transfer direction - from memory to device. + * In a typical scenario, the SoCs are installed on host servers as + * iNICs through the PCIe interface. In this case, the SoCs works in + * EP(endpoint) mode, it could initiate a DMA move request from memory + * (which is SoCs memory) to device (which is host memory). + * + * @see struct rte_dmadev_vchan_conf::direction + */ + RTE_DMA_DIR_DEV_TO_MEM, + /**< DMA transfer direction - from device to memory. + * In a typical scenario, the SoCs are installed on host servers as + * iNICs through the PCIe interface. In this case, the SoCs works in + * EP(endpoint) mode, it could initiate a DMA move request from device + * (which is host memory) to memory (which is SoCs memory). + * + * @see struct rte_dmadev_vchan_conf::direction + */ + RTE_DMA_DIR_DEV_TO_DEV, + /**< DMA transfer direction - from device to device. + * In a typical scenario, the SoCs are installed on host servers as + * iNICs through the PCIe interface. In this case, the SoCs works in + * EP(endpoint) mode, it could initiate a DMA move request from device + * (which is host memory) to the device (which is another host memory). + * + * @see struct rte_dmadev_vchan_conf::direction + */ +}; + +/** + * enum rte_dmadev_port_type - DMA access port type defines. + * + * @see struct rte_dmadev_port_param::port_type + */ +enum rte_dmadev_port_type { + RTE_DMADEV_PORT_NONE, + RTE_DMADEV_PORT_PCIE, /**< The DMA access port is PCIe. */ +}; + +/** + * A structure used to descript DMA access port parameters. + * + * @see struct rte_dmadev_vchan_conf::src_port + * @see struct rte_dmadev_vchan_conf::dst_port + */ +struct rte_dmadev_port_param { + enum rte_dmadev_port_type port_type; + /**< The device access port type. + * @see enum rte_dmadev_port_type + */ + union { + /** PCIe access port parameters. + * + * The following model shows SoC's PCIe module connects to + * multiple PCIe hosts and multiple endpoints. The PCIe module + * has an integrated DMA controller. + * + * If the DMA wants to access the memory of host A, it can be + * initiated by PF1 in core0, or by VF0 of PF0 in core0. + * + * \code{.unparsed} + * System Bus + * | ----------PCIe module---------- + * | Bus + * | Interface + * | ----- ------------------ + * | | | | PCIe Core0 | + * | | | | | ----------- + * | | | | PF-0 -- VF-0 | | Host A | + * | | |--------| |- VF-1 |--------| Root | + * | | | | PF-1 | | Complex | + * | | | | PF-2 | ----------- + * | | | ------------------ + * | | | + * | | | ------------------ + * | | | | PCIe Core1 | + * | | | | | ----------- + * | | | | PF-0 -- VF-0 | | Host B | + * |-----| |--------| PF-1 -- VF-0 |--------| Root | + * | | | | |- VF-1 | | Complex | + * | | | | PF-2 | ----------- + * | | | ------------------ + * | | | + * | | | ------------------ + * | |DMA| | | ------ + * | | | | |--------| EP | + * | | |--------| PCIe Core2 | ------ + * | | | | | ------ + * | | | | |--------| EP | + * | | | | | ------ + * | ----- ------------------ + * + * \endcode + * + * @note If some fields can not be supported by the + * hardware/driver, then the driver ignores those fields. + * Please check driver-specific documentation for limitations + * and capablites. + */ + struct { + uint64_t coreid : 4; /**< PCIe core id used. */ + uint64_t pfid : 8; /**< PF id used. */ + uint64_t vfen : 1; /**< VF enable bit. */ + uint64_t vfid : 16; /**< VF id used. */ + uint64_t pasid : 20; + /**< The pasid filed in TLP packet. */ + uint64_t attr : 3; + /**< The attributes filed in TLP packet. */ + uint64_t ph : 2; + /**< The processing hint filed in TLP packet. */ + uint64_t st : 16; + /**< The steering tag filed in TLP packet. */ + } pcie; + }; + uint64_t reserved[2]; /**< Reserved for future fields. */ +}; + +/** + * A structure used to configure a virtual DMA channel. + */ +struct rte_dmadev_vchan_conf { + enum rte_dma_direction direction; + /**< Transfer direction + * @see enum rte_dma_direction + */ + uint16_t nb_desc; + /**< Number of descriptor for the virtual DMA channel */ + struct rte_dmadev_port_param src_port; + /**< 1) Used to describes the device access port parameter in the + * device-to-memory transfer scenario. + * 2) Used to describes the source device access port parameter in the + * device-to-device transfer scenario. + * @see struct rte_dmadev_port_param + */ + struct rte_dmadev_port_param dst_port; + /**< 1) Used to describes the device access port parameter in the + * memory-to-device transfer scenario. + * 2) Used to describes the destination device access port parameter in + * the device-to-device transfer scenario. + * @see struct rte_dmadev_port_param + */ +}; + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Allocate and set up a virtual DMA channel. + * + * @param dev_id + * The identifier of the device. + * @param conf + * The virtual DMA channel configuration structure encapsulated into + * rte_dmadev_vchan_conf object. + * + * @return + * - >=0: Allocate success, it is the virtual DMA channel id. This value must + * be less than the field 'max_vchans' of struct rte_dmadev_conf + * which configured by rte_dmadev_configure(). + * - <0: Error code returned by the driver virtual channel setup function. + */ +__rte_experimental +int +rte_dmadev_vchan_setup(uint16_t dev_id, + const struct rte_dmadev_vchan_conf *conf); + +/** + * rte_dmadev_stats - running statistics. + */ +struct rte_dmadev_stats { + uint64_t submitted_count; + /**< Count of operations which were submitted to hardware. */ + uint64_t completed_fail_count; + /**< Count of operations which failed to complete. */ + uint64_t completed_count; + /**< Count of operations which successfully complete. */ +}; + +#define RTE_DMADEV_ALL_VCHAN 0xFFFFu + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Retrieve basic statistics of a or all virtual DMA channel(s). + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * If equal RTE_DMADEV_ALL_VCHAN means all channels. + * @param[out] stats + * The basic statistics structure encapsulated into rte_dmadev_stats + * object. + * + * @return + * - =0: Successfully retrieve stats. + * - <0: Failure to retrieve stats. + */ +__rte_experimental +int +rte_dmadev_stats_get(uint16_t dev_id, uint16_t vchan, + struct rte_dmadev_stats *stats); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Reset basic statistics of a or all virtual DMA channel(s). + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * If equal RTE_DMADEV_ALL_VCHAN means all channels. + * + * @return + * - =0: Successfully reset stats. + * - <0: Failure to reset stats. + */ +__rte_experimental +int +rte_dmadev_stats_reset(uint16_t dev_id, uint16_t vchan); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Dump DMA device info. + * + * @param dev_id + * The identifier of the device. + * @param f + * The file to write the output to. + * + * @return + * 0 on success. Non-zero otherwise. + */ +__rte_experimental +int +rte_dmadev_dump(uint16_t dev_id, FILE *f); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Trigger the dmadev self test. + * + * @param dev_id + * The identifier of the device. + * + * @return + * - 0: Selftest successful. + * - -ENOTSUP if the device doesn't support selftest + * - other values < 0 on failure. + */ +__rte_experimental +int +rte_dmadev_selftest(uint16_t dev_id); + +/** + * rte_dma_status_code - DMA transfer result status code defines. + */ +enum rte_dma_status_code { + RTE_DMA_STATUS_SUCCESSFUL, + /**< The operation completed successfully. */ + RTE_DMA_STATUS_USRER_ABORT, + /**< The operation failed to complete due abort by user. + * This is mainly used when processing dev_stop, user could modidy the + * descriptors (e.g. change one bit to tell hardware abort this job), + * it allows outstanding requests to be complete as much as possible, + * so reduce the time to stop the device. + */ + RTE_DMA_STATUS_NOT_ATTEMPTED, + /**< The operation failed to complete due to following scenarios: + * The jobs in a particular batch are not attempted because they + * appeared after a fence where a previous job failed. In some HW + * implementation it's possible for jobs from later batches would be + * completed, though, so report the status from the not attempted jobs + * before reporting those newer completed jobs. + */ + RTE_DMA_STATUS_INVALID_SRC_ADDR, + /**< The operation failed to complete due invalid source address. */ + RTE_DMA_STATUS_INVALID_DST_ADDR, + /**< The operation failed to complete due invalid destination + * address. + */ + RTE_DMA_STATUS_INVALID_LENGTH, + /**< The operation failed to complete due invalid length. */ + RTE_DMA_STATUS_INVALID_OPCODE, + /**< The operation failed to complete due invalid opcode. + * The DMA descriptor could have multiple format, which are + * distinguished by the opcode field. + */ + RTE_DMA_STATUS_BUS_ERROR, + /**< The operation failed to complete due bus err. */ + RTE_DMA_STATUS_DATA_POISION, + /**< The operation failed to complete due data poison. */ + RTE_DMA_STATUS_DESCRIPTOR_READ_ERROR, + /**< The operation failed to complete due descriptor read error. */ + RTE_DMA_STATUS_DEV_LINK_ERROR, + /**< The operation failed to complete due device link error. + * Used to indicates that the link error in the memory-to-device/ + * device-to-memory/device-to-device transfer scenario. + */ + RTE_DMA_STATUS_UNKNOWN = 0x100, + /**< The operation failed to complete due unknown reason. + * The initial value is 256, which reserves space for future errors. + */ +}; + +/** + * rte_dmadev_sge - can hold scatter DMA operation request entry. + */ +struct rte_dmadev_sge { + rte_iova_t addr; /**< The DMA operation address. */ + uint32_t length; /**< The DMA operation length. */ +}; + +#include "rte_dmadev_core.h" + +/* DMA flags to augment operation preparation. */ +#define RTE_DMA_OP_FLAG_FENCE (1ull << 0) +/**< DMA fence flag. + * It means the operation with this flag must be processed only after all + * previous operations are completed. + * If the specify DMA HW works in-order (it means it has default fence between + * operations), this flag could be NOP. + * + * @see rte_dmadev_copy() + * @see rte_dmadev_copy_sg() + * @see rte_dmadev_fill() + */ + +#define RTE_DMA_OP_FLAG_SUBMIT (1ull << 1) +/**< DMA submit flag. + * It means the operation with this flag must issue doorbell to hardware after + * enqueued jobs. + */ + +#define RTE_DMA_OP_FLAG_LLC (1ull << 2) +/**< DMA write data to low level cache hint. + * Used for performance optimization, this is just a hint, and there is no + * capability bit for this, driver should not return error if this flag was set. + */ + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Enqueue a copy operation onto the virtual DMA channel. + * + * This queues up a copy operation to be performed by hardware, if the 'flags' + * parameter contains RTE_DMA_OP_FLAG_SUBMIT then trigger doorbell to begin + * this operation, otherwise do not trigger doorbell. + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * @param src + * The address of the source buffer. + * @param dst + * The address of the destination buffer. + * @param length + * The length of the data to be copied. + * @param flags + * An flags for this operation. + * @see RTE_DMA_OP_FLAG_* + * + * @return + * - 0..UINT16_MAX: index of enqueued copy job. + * - <0: Error code returned by the driver copy function. + */ +__rte_experimental +static inline int +rte_dmadev_copy(uint16_t dev_id, uint16_t vchan, rte_iova_t src, rte_iova_t dst, + uint32_t length, uint64_t flags) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + +#ifdef RTE_DMADEV_DEBUG + if (!rte_dmadev_is_valid_dev(dev_id) || + vchan >= dev->data->dev_conf.max_vchans || length == 0) + return -EINVAL; + RTE_FUNC_PTR_OR_ERR_RET(*dev->copy, -ENOTSUP); +#endif + + return (*dev->copy)(dev, vchan, src, dst, length, flags); +} + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Enqueue a scatter list copy operation onto the virtual DMA channel. + * + * This queues up a scatter list copy operation to be performed by hardware, if + * the 'flags' parameter contains RTE_DMA_OP_FLAG_SUBMIT then trigger doorbell + * to begin this operation, otherwise do not trigger doorbell. + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * @param src + * The pointer of source scatter entry array. + * @param dst + * The pointer of destination scatter entry array. + * @param nb_src + * The number of source scatter entry. + * @param nb_dst + * The number of destination scatter entry. + * @param flags + * An flags for this operation. + * @see RTE_DMA_OP_FLAG_* + * + * @return + * - 0..UINT16_MAX: index of enqueued copy scatterlist job. + * - <0: Error code returned by the driver copy scatterlist function. + */ +__rte_experimental +static inline int +rte_dmadev_copy_sg(uint16_t dev_id, uint16_t vchan, struct rte_dmadev_sge *src, + struct rte_dmadev_sge *dst, uint16_t nb_src, uint16_t nb_dst, + uint64_t flags) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + +#ifdef RTE_DMADEV_DEBUG + if (!rte_dmadev_is_valid_dev(dev_id) || + vchan >= dev->data->dev_conf.max_vchans || + src == NULL || dst == NULL || nb_src == 0 || nb_dst == 0) + return -EINVAL; + RTE_FUNC_PTR_OR_ERR_RET(*dev->copy_sg, -ENOTSUP); +#endif + + return (*dev->copy_sg)(dev, vchan, src, dst, nb_src, nb_dst, flags); +} + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Enqueue a fill operation onto the virtual DMA channel. + * + * This queues up a fill operation to be performed by hardware, if the 'flags' + * parameter contains RTE_DMA_OP_FLAG_SUBMIT then trigger doorbell to begin + * this operation, otherwise do not trigger doorbell. + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * @param pattern + * The pattern to populate the destination buffer with. + * @param dst + * The address of the destination buffer. + * @param length + * The length of the destination buffer. + * @param flags + * An flags for this operation. + * @see RTE_DMA_OP_FLAG_* + * + * @return + * - 0..UINT16_MAX: index of enqueued fill job. + * - <0: Error code returned by the driver fill function. + */ +__rte_experimental +static inline int +rte_dmadev_fill(uint16_t dev_id, uint16_t vchan, uint64_t pattern, + rte_iova_t dst, uint32_t length, uint64_t flags) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + +#ifdef RTE_DMADEV_DEBUG + if (!rte_dmadev_is_valid_dev(dev_id) || + vchan >= dev->data->dev_conf.max_vchans || length == 0) + return -EINVAL; + RTE_FUNC_PTR_OR_ERR_RET(*dev->fill, -ENOTSUP); +#endif + + return (*dev->fill)(dev, vchan, pattern, dst, length, flags); +} + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Trigger hardware to begin performing enqueued operations. + * + * This API is used to write the "doorbell" to the hardware to trigger it + * to begin the operations previously enqueued by rte_dmadev_copy/fill(). + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * + * @return + * - =0: Successfully trigger hardware. + * - <0: Failure to trigger hardware. + */ +__rte_experimental +static inline int +rte_dmadev_submit(uint16_t dev_id, uint16_t vchan) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + +#ifdef RTE_DMADEV_DEBUG + if (!rte_dmadev_is_valid_dev(dev_id) || + vchan >= dev->data->dev_conf.max_vchans) + return -EINVAL; + RTE_FUNC_PTR_OR_ERR_RET(*dev->submit, -ENOTSUP); +#endif + + return (*dev->submit)(dev, vchan); +} + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Returns the number of operations that have been successfully completed. + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * @param nb_cpls + * The maximum number of completed operations that can be processed. + * @param[out] last_idx + * The last completed operation's index. + * If not required, NULL can be passed in. + * @param[out] has_error + * Indicates if there are transfer error. + * If not required, NULL can be passed in. + * + * @return + * The number of operations that successfully completed. This return value + * must be less than or equal to the value of nb_cpls. + */ +__rte_experimental +static inline uint16_t +rte_dmadev_completed(uint16_t dev_id, uint16_t vchan, const uint16_t nb_cpls, + uint16_t *last_idx, bool *has_error) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + uint16_t idx; + bool err; + +#ifdef RTE_DMADEV_DEBUG + if (!rte_dmadev_is_valid_dev(dev_id) || + vchan >= dev->data->dev_conf.max_vchans || nb_cpls == 0) + return 0; + RTE_FUNC_PTR_OR_ERR_RET(*dev->completed, 0); +#endif + + /* Ensure the pointer values are non-null to simplify drivers. + * In most cases these should be compile time evaluated, since this is + * an inline function. + * - If NULL is explicitly passed as parameter, then compiler knows the + * value is NULL + * - If address of local variable is passed as parameter, then compiler + * can know it's non-NULL. + */ + if (last_idx == NULL) + last_idx = &idx; + if (has_error == NULL) + has_error = &err; + + *has_error = false; + return (*dev->completed)(dev, vchan, nb_cpls, last_idx, has_error); +} + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Returns the number of operations that have been completed, and the + * operations result may succeed or fail. + * + * @param dev_id + * The identifier of the device. + * @param vchan + * The identifier of virtual DMA channel. + * @param nb_cpls + * Indicates the size of status array. + * @param[out] last_idx + * The last completed operation's index. + * If not required, NULL can be passed in. + * @param[out] status + * The error code of operations that completed. + * @see enum rte_dma_status_code + * + * @return + * The number of operations that completed. This return value must be less + * than or equal to the value of nb_cpls. + */ +__rte_experimental +static inline uint16_t +rte_dmadev_completed_status(uint16_t dev_id, uint16_t vchan, + const uint16_t nb_cpls, uint16_t *last_idx, + enum rte_dma_status_code *status) +{ + struct rte_dmadev *dev = &rte_dmadevices[dev_id]; + uint16_t idx; + +#ifdef RTE_DMADEV_DEBUG + if (!rte_dmadev_is_valid_dev(dev_id) || + vchan >= dev->data->dev_conf.max_vchans || + nb_cpls == 0 || status == NULL) + return 0; + RTE_FUNC_PTR_OR_ERR_RET(*dev->completed_status, 0); +#endif + + if (last_idx == NULL) + last_idx = &idx; + + return (*dev->completed_status)(dev, vchan, nb_cpls, last_idx, status); +} + +#ifdef __cplusplus +} +#endif + +#endif /* _RTE_DMADEV_H_ */ diff --git a/lib/dmadev/rte_dmadev_core.h b/lib/dmadev/rte_dmadev_core.h new file mode 100644 index 0000000..0122f67 --- /dev/null +++ b/lib/dmadev/rte_dmadev_core.h @@ -0,0 +1,182 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2021 HiSilicon Limited. + * Copyright(c) 2021 Intel Corporation. + */ + +#ifndef _RTE_DMADEV_CORE_H_ +#define _RTE_DMADEV_CORE_H_ + +/** + * @file + * + * RTE DMA Device internal header. + * + * This header contains internal data types, that are used by the DMA devices + * in order to expose their ops to the class. + * + * Applications should not use these API directly. + * + */ + +struct rte_dmadev; + +typedef int (*rte_dmadev_info_get_t)(const struct rte_dmadev *dev, + struct rte_dmadev_info *dev_info, + uint32_t info_sz); +/**< @internal Used to get device information of a device. */ + +typedef int (*rte_dmadev_configure_t)(struct rte_dmadev *dev, + const struct rte_dmadev_conf *dev_conf); +/**< @internal Used to configure a device. */ + +typedef int (*rte_dmadev_start_t)(struct rte_dmadev *dev); +/**< @internal Used to start a configured device. */ + +typedef int (*rte_dmadev_stop_t)(struct rte_dmadev *dev); +/**< @internal Used to stop a configured device. */ + +typedef int (*rte_dmadev_close_t)(struct rte_dmadev *dev); +/**< @internal Used to close a configured device. */ + +typedef int (*rte_dmadev_vchan_setup_t)(struct rte_dmadev *dev, + const struct rte_dmadev_vchan_conf *conf); +/**< @internal Used to allocate and set up a virtual DMA channel. */ + +typedef int (*rte_dmadev_stats_get_t)(const struct rte_dmadev *dev, + uint16_t vchan, struct rte_dmadev_stats *stats, + uint32_t stats_sz); +/**< @internal Used to retrieve basic statistics. */ + +typedef int (*rte_dmadev_stats_reset_t)(struct rte_dmadev *dev, uint16_t vchan); +/**< @internal Used to reset basic statistics. */ + +typedef int (*rte_dmadev_dump_t)(const struct rte_dmadev *dev, FILE *f); +/**< @internal Used to dump internal information. */ + +typedef int (*rte_dmadev_selftest_t)(uint16_t dev_id); +/**< @internal Used to start dmadev selftest. */ + +typedef int (*rte_dmadev_copy_t)(struct rte_dmadev *dev, uint16_t vchan, + rte_iova_t src, rte_iova_t dst, + uint32_t length, uint64_t flags); +/**< @internal Used to enqueue a copy operation. */ + +typedef int (*rte_dmadev_copy_sg_t)(struct rte_dmadev *dev, uint16_t vchan, + const struct rte_dmadev_sge *src, + const struct rte_dmadev_sge *dst, + uint16_t nb_src, uint16_t nb_dst, + uint64_t flags); +/**< @internal Used to enqueue a scatter list copy operation. */ + +typedef int (*rte_dmadev_fill_t)(struct rte_dmadev *dev, uint16_t vchan, + uint64_t pattern, rte_iova_t dst, + uint32_t length, uint64_t flags); +/**< @internal Used to enqueue a fill operation. */ + +typedef int (*rte_dmadev_submit_t)(struct rte_dmadev *dev, uint16_t vchan); +/**< @internal Used to trigger hardware to begin working. */ + +typedef uint16_t (*rte_dmadev_completed_t)(struct rte_dmadev *dev, + uint16_t vchan, const uint16_t nb_cpls, + uint16_t *last_idx, bool *has_error); +/**< @internal Used to return number of successful completed operations. */ + +typedef uint16_t (*rte_dmadev_completed_status_t)(struct rte_dmadev *dev, + uint16_t vchan, const uint16_t nb_cpls, + uint16_t *last_idx, enum rte_dma_status_code *status); +/**< @internal Used to return number of completed operations. */ + +/** + * Possible states of a DMA device. + */ +enum rte_dmadev_state { + RTE_DMADEV_UNUSED = 0, + /**< Device is unused before being probed. */ + RTE_DMADEV_ATTACHED, + /**< Device is attached when allocated in probing. */ +}; + +/** + * DMA device operations function pointer table + */ +struct rte_dmadev_ops { + rte_dmadev_info_get_t dev_info_get; + rte_dmadev_configure_t dev_configure; + rte_dmadev_start_t dev_start; + rte_dmadev_stop_t dev_stop; + rte_dmadev_close_t dev_close; + rte_dmadev_vchan_setup_t vchan_setup; + rte_dmadev_stats_get_t stats_get; + rte_dmadev_stats_reset_t stats_reset; + rte_dmadev_dump_t dev_dump; + rte_dmadev_selftest_t dev_selftest; +}; + +/** + * @internal + * The data part, with no function pointers, associated with each DMA device. + * + * This structure is safe to place in shared memory to be common among different + * processes in a multi-process configuration. + */ +struct rte_dmadev_data { + void *dev_private; + /**< PMD-specific private data. + * This is a copy of the 'dev_private' field in the 'struct rte_dmadev' + * from primary process, it is used by the secondary process to get + * dev_private information. + */ + uint16_t dev_id; /**< Device [external] identifier. */ + char dev_name[RTE_DMADEV_NAME_MAX_LEN]; /**< Unique identifier name */ + struct rte_dmadev_conf dev_conf; /**< DMA device configuration. */ + uint8_t dev_started : 1; /**< Device state: STARTED(1)/STOPPED(0). */ + uint64_t reserved[2]; /**< Reserved for future fields */ +} __rte_cache_aligned; + +/** + * @internal + * The generic data structure associated with each DMA device. + * + * The dataplane APIs are located at the beginning of the structure, along + * with the pointer to where all the data elements for the particular device + * are stored in shared memory. This split scheme allows the function pointer + * and driver data to be per-process, while the actual configuration data for + * the device is shared. + * And the 'dev_private' field was placed in the first cache line to optimize + * performance because the PMD driver mainly depends on this field. + */ +struct rte_dmadev { + rte_dmadev_copy_t copy; + rte_dmadev_copy_sg_t copy_sg; + rte_dmadev_fill_t fill; + rte_dmadev_submit_t submit; + rte_dmadev_completed_t completed; + rte_dmadev_completed_status_t completed_status; + void *reserved_ptr; /**< Reserved for future IO function. */ + void *dev_private; + /**< PMD-specific private data. + * + * - If is the primary process, after dmadev allocated by + * rte_dmadev_pmd_allocate(), the PCI/SoC device probing should + * initialize this field, and copy it's value to the 'dev_private' + * field of 'struct rte_dmadev_data' which pointer by 'data' filed. + * + * - If is the secondary process, dmadev framework will initialize this + * field by copy from 'dev_private' field of 'struct rte_dmadev_data' + * which initialized by primary process. + * + * @note It's the primary process responsibility to deinitialize this + * field after invoke rte_dmadev_pmd_release() in the PCI/SoC device + * removing stage. + */ + struct rte_dmadev_data *data; /**< Pointer to device data. */ + const struct rte_dmadev_ops *dev_ops; /**< Functions exported by PMD. */ + struct rte_device *device; + /**< Device info which supplied during device initialization. */ + enum rte_dmadev_state state; /**< Flag indicating the device state. */ + uint64_t reserved[2]; /**< Reserved for future fields. */ +} __rte_cache_aligned; + +extern struct rte_dmadev rte_dmadevices[]; + +#endif /* _RTE_DMADEV_CORE_H_ */ diff --git a/lib/dmadev/rte_dmadev_pmd.h b/lib/dmadev/rte_dmadev_pmd.h new file mode 100644 index 0000000..45141f9 --- /dev/null +++ b/lib/dmadev/rte_dmadev_pmd.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2021 HiSilicon Limited. + */ + +#ifndef _RTE_DMADEV_PMD_H_ +#define _RTE_DMADEV_PMD_H_ + +/** + * @file + * + * RTE DMA Device PMD APIs + * + * Driver facing APIs for a DMA device. These are not to be called directly by + * any application. + */ + +#include "rte_dmadev.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @internal + * Allocates a new dmadev slot for an DMA device and returns the pointer + * to that slot for the driver to use. + * + * @param name + * DMA device name. + * + * @return + * A pointer to the DMA device slot case of success, + * NULL otherwise. + */ +__rte_internal +struct rte_dmadev * +rte_dmadev_pmd_allocate(const char *name); + +/** + * @internal + * Release the specified dmadev. + * + * @param dev + * Device to be released. + * + * @return + * - 0 on success, negative on error + */ +__rte_internal +int +rte_dmadev_pmd_release(struct rte_dmadev *dev); + +/** + * @internal + * Return the DMA device based on the device name. + * + * @param name + * DMA device name. + * + * @return + * A pointer to the DMA device slot case of success, + * NULL otherwise. + */ +__rte_internal +struct rte_dmadev * +rte_dmadev_get_device_by_name(const char *name); + +#ifdef __cplusplus +} +#endif + +#endif /* _RTE_DMADEV_PMD_H_ */ diff --git a/lib/dmadev/version.map b/lib/dmadev/version.map new file mode 100644 index 0000000..0f2ed4b --- /dev/null +++ b/lib/dmadev/version.map @@ -0,0 +1,37 @@ +EXPERIMENTAL { + global: + + rte_dmadev_close; + rte_dmadev_completed; + rte_dmadev_completed_status; + rte_dmadev_configure; + rte_dmadev_copy; + rte_dmadev_copy_sg; + rte_dmadev_count; + rte_dmadev_dump; + rte_dmadev_fill; + rte_dmadev_get_dev_id; + rte_dmadev_info_get; + rte_dmadev_is_valid_dev; + rte_dmadev_selftest; + rte_dmadev_start; + rte_dmadev_stats_get; + rte_dmadev_stats_reset; + rte_dmadev_stop; + rte_dmadev_submit; + rte_dmadev_vchan_setup; + + local: *; +}; + +INTERNAL { + global: + + rte_dmadevices; + rte_dmadev_get_device_by_name; + rte_dmadev_pmd_allocate; + rte_dmadev_pmd_release; + + local: *; +}; + diff --git a/lib/meson.build b/lib/meson.build index 1673ca4..68d239f 100644 --- a/lib/meson.build +++ b/lib/meson.build @@ -60,6 +60,7 @@ libraries = [ 'bpf', 'graph', 'node', + 'dmadev', ] if is_windows -- 2.8.1