Add start, stop and recover functions for IOAT devices.
Signed-off-by: Conor Walsh <conor.wa...@intel.com>
Signed-off-by: Bruce Richardson <bruce.richard...@intel.com>
Reviewed-by: Kevin Laatz <kevin.la...@intel.com>
---
doc/guides/dmadevs/ioat.rst | 3 ++
drivers/dma/ioat/ioat_dmadev.c | 92 ++++++++++++++++++++++++++++++++++
2 files changed, 95 insertions(+)
diff --git a/doc/guides/dmadevs/ioat.rst b/doc/guides/dmadevs/ioat.rst
index b1f847d273..d93d28023f 100644
--- a/doc/guides/dmadevs/ioat.rst
+++ b/doc/guides/dmadevs/ioat.rst
@@ -86,3 +86,6 @@ IOAT configuration requirements:
* Only one ``vchan`` is supported per device.
* Silent mode is not supported.
* The transfer direction must be set to ``RTE_DMA_DIR_MEM_TO_MEM`` to copy
from memory to memory.
+
+Once configured, the device can then be made ready for use by calling the
+``rte_dma_start()`` API.
diff --git a/drivers/dma/ioat/ioat_dmadev.c b/drivers/dma/ioat/ioat_dmadev.c
index 92c4e2b04f..96bf55135f 100644
--- a/drivers/dma/ioat/ioat_dmadev.c
+++ b/drivers/dma/ioat/ioat_dmadev.c
@@ -78,6 +78,96 @@ ioat_vchan_setup(struct rte_dma_dev *dev, uint16_t vchan
__rte_unused,
return 0;
}
+/* Recover IOAT device. */
+static inline int
+__ioat_recover(struct ioat_dmadev *ioat)
+{
+ uint32_t chanerr, retry = 0;
+ uint16_t mask = ioat->qcfg.nb_desc - 1;
+
+ /* Clear any channel errors. Reading and writing to chanerr does this.
*/
+ chanerr = ioat->regs->chanerr;
+ ioat->regs->chanerr = chanerr;
+
+ /* Reset Channel. */
+ ioat->regs->chancmd = IOAT_CHANCMD_RESET;
+
+ /* Write new chain address to trigger state change. */
+ ioat->regs->chainaddr = ioat->desc_ring[(ioat->next_read - 1) &
mask].next;
+ /* Ensure channel control and status addr are correct. */
+ ioat->regs->chanctrl = IOAT_CHANCTRL_ANY_ERR_ABORT_EN |
+ IOAT_CHANCTRL_ERR_COMPLETION_EN;
+ ioat->regs->chancmp = ioat->status_addr;
+
+ /* Allow HW time to move to the ARMED state. */
+ do {
+ rte_pause();
+ retry++;
+ } while (ioat->regs->chansts != IOAT_CHANSTS_ARMED && retry < 200);
+
+ /* Exit as failure if device is still HALTED. */
+ if (ioat->regs->chansts != IOAT_CHANSTS_ARMED)
+ return -1;
+
+ /* Store next write as offset as recover will move HW and SW ring out
of sync. */
+ ioat->offset = ioat->next_read;
+
+ /* Prime status register with previous address. */
+ ioat->status = ioat->desc_ring[(ioat->next_read - 2) & mask].next;
+
+ return 0;
+}
+
+/* Start a configured device. */
+static int
+ioat_dev_start(struct rte_dma_dev *dev)
+{
+ struct ioat_dmadev *ioat = dev->dev_private;
+
+ if (ioat->qcfg.nb_desc == 0 || ioat->desc_ring == NULL)
+ return -EBUSY;
+
+ /* Inform hardware of where the descriptor ring is. */
+ ioat->regs->chainaddr = ioat->ring_addr;
+ /* Inform hardware of where to write the status/completions. */
+ ioat->regs->chancmp = ioat->status_addr;
+
+ /* Prime the status register to be set to the last element. */
+ ioat->status = ioat->ring_addr + ((ioat->qcfg.nb_desc - 1) * DESC_SZ);
+
+ printf("IOAT.status: %s [0x%"PRIx64"]\n",
+ chansts_readable[ioat->status & IOAT_CHANSTS_STATUS],
+ ioat->status);
+
+ if ((ioat->regs->chansts & IOAT_CHANSTS_STATUS) == IOAT_CHANSTS_HALTED)
{
+ IOAT_PMD_WARN("Device HALTED on start, attempting to
recover\n");
+ if (__ioat_recover(ioat) != 0) {
+ IOAT_PMD_ERR("Device couldn't be recovered");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+/* Stop a configured device. */
+static int
+ioat_dev_stop(struct rte_dma_dev *dev)
+{
+ struct ioat_dmadev *ioat = dev->dev_private;
+ uint32_t retry = 0;
+
+ ioat->regs->chancmd = IOAT_CHANCMD_SUSPEND;
+
+ do {
+ rte_pause();
+ retry++;
+ } while ((ioat->regs->chansts & IOAT_CHANSTS_STATUS) !=
IOAT_CHANSTS_SUSPENDED
+ && retry < 200);
+
+ return ((ioat->regs->chansts & IOAT_CHANSTS_STATUS) ==
IOAT_CHANSTS_SUSPENDED) ? 0 : -1;
+}
+
/* Get device information of a device. */
static int
ioat_dev_info_get(const struct rte_dma_dev *dev, struct rte_dma_info *info,
uint32_t size)
@@ -186,6 +276,8 @@ ioat_dmadev_create(const char *name, struct rte_pci_device
*dev)
.dev_configure = ioat_dev_configure,
.dev_dump = ioat_dev_dump,
.dev_info_get = ioat_dev_info_get,
+ .dev_start = ioat_dev_start,
+ .dev_stop = ioat_dev_stop,
.vchan_setup = ioat_vchan_setup,
};
--
2.25.1
