Where is tx queue setup? And I believe that's also why patchwork is complaining code can't be applied.
> -----Original Message----- > From: Guo, Junfeng <[email protected]> > Sent: Wednesday, January 18, 2023 2:54 AM > To: Zhang, Qi Z <[email protected]>; Wu, Jingjing > <[email protected]>; [email protected]; Xing, Beilei > <[email protected]> > Cc: [email protected]; Li, Xiaoyun <[email protected]>; Zhang, Helin > <[email protected]>; Guo, Junfeng <[email protected]> > Subject: [RFC 0/8] gve PMD enhancement > > This patch set includs three main enhancements for gve PMD: > - support basic data path for DQO queue format > - support jumbo frame for GQI queue format > - add new AdminQ cmd to verify driver compatibility > > Junfeng Guo (8): > net/gve: add Rx queue setup for DQO > net/gve: support device start and close for DQO > net/gve: support queue release and stop for DQO > net/gve: support basic Tx data path for DQO > net/gve: support basic Rx data path for DQO > net/gve: support basic stats for DQO > net/gve: support jumbo frame for GQI > net/gve: add AdminQ command to verify driver compatibility > > drivers/net/gve/base/gve_adminq.c | 29 ++- > drivers/net/gve/base/gve_adminq.h | 48 +++++ > drivers/net/gve/base/gve_osdep.h | 8 + > drivers/net/gve/gve_ethdev.c | 184 +++++++++++++++- > drivers/net/gve/gve_ethdev.h | 53 +++++ > drivers/net/gve/gve_rx.c | 131 +++++++++--- > drivers/net/gve/gve_rx_dqo.c | 343 > ++++++++++++++++++++++++++++++ > drivers/net/gve/gve_tx.c | 3 + > drivers/net/gve/gve_tx_dqo.c | 202 ++++++++++++++++++ > drivers/net/gve/meson.build | 1 + > 10 files changed, 961 insertions(+), 41 deletions(-) create mode 100644 > drivers/net/gve/gve_rx_dqo.c > > -- > 2.34.1
