This patch provides the initial implementation of the AES-NI multi-buffer
based crypto poll mode driver using DPDK's new cryptodev framework.

This PMD is dependent on Intel's multibuffer library, see the whitepaper
"Fast Multi-buffer IPsec Implementations on Intel? Architecture
Processors", see ref 1 for details on the library's design and ref 2 to
download the library itself. This initial implementation is limited to
supporting the chained operations of "hash then cipher" or "cipher then
hash" for the following cipher and hash algorithms:

Cipher algorithms:
  - RTE_CRYPTO_CIPHER_AES128_CBC
  - RTE_CRYPTO_CIPHER_AES256_CBC
  - RTE_CRYPTO_CIPHER_AES512_CBC

Hash algorithms:
  - RTE_CRYPTO_AUTH_SHA1_HMAC
  - RTE_CRYPTO_AUTH_SHA256_HMAC
  - RTE_CRYPTO_AUTH_SHA512_HMAC
  - RTE_CRYPTO_AUTH_AES_XCBC_MAC

Important Note:
Due to the fact that the multi-buffer library is designed for
accelerating IPsec crypto oepration, the digest's generated for the HMAC
functions are truncated to lengths specified by IPsec RFC's, ie RFC2404
for using HMAC-SHA-1 with IPsec specifies that the digest is truncate
from 20 to 12 bytes.

Build instructions:
To build DPKD with the AESNI_MB_PMD the user is required to download
(ref 2) and compile the multi-buffer library on there user system before
building DPDK. The environmental variable AESNI_MULTI_BUFFER_LIB_PATH
must be exported with the path where you extracted and built the multi
buffer library and finally set CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y in
config/common_linuxapp.

Current status: It's doesn't support crypto operation
across chained mbufs, or cipher only or hash only operations.

ref 1:
https://www-ssl.intel.com/content/www/us/en/intelligent-systems/intel-technology/fast-multi-buffer-ipsec-implementations-ia-processors-p

ref 2: https://downloadcenter.intel.com/download/22972

Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy at intel.com>
Signed-off-by: Declan Doherty <declan.doherty at intel.com>
---
 MAINTAINERS                                        |   3 +
 config/common_bsdapp                               |   7 +
 config/common_linuxapp                             |   7 +
 doc/guides/cryptodevs/aesni_mb.rst                 |  76 +++
 doc/guides/cryptodevs/index.rst                    |   1 +
 drivers/crypto/Makefile                            |   1 +
 drivers/crypto/aesni_mb/Makefile                   |  63 ++
 drivers/crypto/aesni_mb/aesni_mb_ops.h             | 210 +++++++
 drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c         | 669 +++++++++++++++++++++
 drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c     | 298 +++++++++
 drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h | 229 +++++++
 drivers/crypto/aesni_mb/rte_pmd_aesni_version.map  |   3 +
 mk/rte.app.mk                                      |   4 +
 13 files changed, 1571 insertions(+)
 create mode 100644 doc/guides/cryptodevs/aesni_mb.rst
 create mode 100644 drivers/crypto/aesni_mb/Makefile
 create mode 100644 drivers/crypto/aesni_mb/aesni_mb_ops.h
 create mode 100644 drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
 create mode 100644 drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
 create mode 100644 drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h
 create mode 100644 drivers/crypto/aesni_mb/rte_pmd_aesni_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 73d9578..2d5808c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -303,6 +303,9 @@ Null PMD
 M: Tetsuya Mukawa <mukawa at igel.co.jp>
 F: drivers/net/null/

+Crypto AES-NI Multi-Buffer PMD
+M: Declan Doherty <declan.doherty at intel.com>
+F: driver/crypto/aesni_mb

 Packet processing
 -----------------
diff --git a/config/common_bsdapp b/config/common_bsdapp
index 0068b20..a18e817 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -168,6 +168,13 @@ CONFIG_RTE_LIBRTE_QAT_DEBUG_DRIVER=n
 #
 CONFIG_RTE_MAX_QAT_SESSIONS=200

+
+#
+# Compile PMD for AESNI backed device
+#
+CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
+CONFIG_RTE_LIBRTE_AESNI_MB_DEBUG=n
+
 #
 # Support NIC bypass logic
 #
diff --git a/config/common_linuxapp b/config/common_linuxapp
index b29d3dd..d9c8c5c 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -166,6 +166,13 @@ CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
 #
 CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048

+# Compile PMD for AESNI backed device
+#
+CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
+CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
+CONFIG_RTE_AESNI_MB_PMD_MAX_NB_QUEUE_PAIRS=8
+CONFIG_RTE_AESNI_MB_PMD_MAX_NB_SESSIONS=2048
+
 #
 # Support NIC bypass logic
 #
diff --git a/doc/guides/cryptodevs/aesni_mb.rst 
b/doc/guides/cryptodevs/aesni_mb.rst
new file mode 100644
index 0000000..826b632
--- /dev/null
+++ b/doc/guides/cryptodevs/aesni_mb.rst
@@ -0,0 +1,76 @@
+..  BSD LICENSE
+    Copyright(c) 2015 Intel Corporation. All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+AESN-NI Multi Buffer Crytpo Poll Mode Driver
+============================================
+
+
+The AESNI MB PMD (**librte_pmd_aesni_mb**) provides poll mode crypto driver
+support for utilising Intel multi buffer library, see the white paper
+`Fast Multi-buffer IPsec Implementations on Intel? Architecture Processors
+<https://www-ssl.intel.com/content/www/us/en/intelligent-systems/intel-technology/fast-multi-buffer-ipsec-implementations-ia-processors-paper.html?wapkw=multi+buffer>`_.
+
+The AES-NI MB PMD has current only been tested on Fedora 21 64-bit with gcc.
+
+Features
+--------
+
+AESNI MB PMD has support for:
+
+Cipher algorithms:
+
+* RTE_CRYPTO_SYM_CIPHER_AES128_CBC
+* RTE_CRYPTO_SYM_CIPHER_AES256_CBC
+* RTE_CRYPTO_SYM_CIPHER_AES512_CBC
+
+Hash algorithms:
+
+* RTE_CRYPTO_SYM_HASH_SHA1_HMAC
+* RTE_CRYPTO_SYM_HASH_SHA256_HMAC
+* RTE_CRYPTO_SYM_HASH_SHA512_HMAC
+
+Limitations
+-----------
+
+* Chained mbufs are not supported.
+* Hash only is not supported.
+* Cipher only is not supported.
+* Only in-place is currently supported (destination address is the same as 
source address).
+* Only supports session-oriented API implementation (session-less APIs are not 
supported).
+*  Not performance tuned.
+
+Installation
+------------
+
+To build DPKD with the AESNI_MB_PMD the user is required to download the 
library
+from `here <https://downloadcenter.intel.com/download/22972>`_ and compile it 
on
+their user system before building DPDK. The environmental variable
+AESNI_MULTI_BUFFER_LIB_PATH must be exported with the path where you extracted
+and built the multi buffer library and finally set
+CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y in config/common_linuxapp.
diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst
index 1c31697..8949fd0 100644
--- a/doc/guides/cryptodevs/index.rst
+++ b/doc/guides/cryptodevs/index.rst
@@ -39,4 +39,5 @@ Crypto Device Drivers
     :maxdepth: 2
     :numbered:

+    aesni_mb
     qat
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index f6aecea..d07ee96 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -31,6 +31,7 @@

 include $(RTE_SDK)/mk/rte.vars.mk

+DIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += aesni_mb
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat

 include $(RTE_SDK)/mk/rte.sharelib.mk
diff --git a/drivers/crypto/aesni_mb/Makefile b/drivers/crypto/aesni_mb/Makefile
new file mode 100644
index 0000000..3bf83d1
--- /dev/null
+++ b/drivers/crypto/aesni_mb/Makefile
@@ -0,0 +1,63 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2015 Intel Corporation. All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+ifeq ($(AESNI_MULTI_BUFFER_LIB_PATH),)
+$(error "Please define AESNI_MULTI_BUFFER_LIB_PATH environment variable")
+endif
+
+# library name
+LIB = librte_pmd_aesni_mb.a
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+# library version
+LIBABIVER := 1
+
+# versioning export map
+EXPORT_MAP := rte_pmd_aesni_version.map
+
+# external library include paths
+CFLAGS += -I$(AESNI_MULTI_BUFFER_LIB_PATH)
+CFLAGS += -I$(AESNI_MULTI_BUFFER_LIB_PATH)/include
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += rte_aesni_mb_pmd.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += rte_aesni_mb_pmd_ops.c
+
+# library dependencies
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += lib/librte_cryptodev
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/aesni_mb/aesni_mb_ops.h 
b/drivers/crypto/aesni_mb/aesni_mb_ops.h
new file mode 100644
index 0000000..0c119bf
--- /dev/null
+++ b/drivers/crypto/aesni_mb/aesni_mb_ops.h
@@ -0,0 +1,210 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2015 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _AESNI_MB_OPS_H_
+#define _AESNI_MB_OPS_H_
+
+#ifndef LINUX
+#define LINUX
+#endif
+
+#include <mb_mgr.h>
+#include <aux_funcs.h>
+
+enum aesni_mb_vector_mode {
+       RTE_AESNI_MB_NOT_SUPPORTED = 0,
+       RTE_AESNI_MB_SSE,
+       RTE_AESNI_MB_AVX,
+       RTE_AESNI_MB_AVX2
+};
+
+typedef void (*md5_one_block_t)(void *data, void *digest);
+
+typedef void (*sha1_one_block_t)(void *data, void *digest);
+typedef void (*sha224_one_block_t)(void *data, void *digest);
+typedef void (*sha256_one_block_t)(void *data, void *digest);
+typedef void (*sha384_one_block_t)(void *data, void *digest);
+typedef void (*sha512_one_block_t)(void *data, void *digest);
+
+typedef void (*aes_keyexp_128_t)
+               (void *key, void *enc_exp_keys, void *dec_exp_keys);
+typedef void (*aes_keyexp_192_t)
+               (void *key, void *enc_exp_keys, void *dec_exp_keys);
+typedef void (*aes_keyexp_256_t)
+               (void *key, void *enc_exp_keys, void *dec_exp_keys);
+
+typedef void (*aes_xcbc_expand_key_t)
+               (void *key, void *exp_k1, void *k2, void *k3);
+
+/** Multi-buffer library function pointer table */
+struct aesni_mb_ops {
+       struct {
+               init_mb_mgr_t init_mgr;
+               /**< Initialise scheduler  */
+               get_next_job_t get_next;
+               /**< Get next free job structure */
+               submit_job_t submit;
+               /**< Submit job to scheduler */
+               get_completed_job_t get_completed_job;
+               /**< Get completed job */
+               flush_job_t flush_job;
+               /**< flush jobs from manager */
+       } job;
+       /**< multi buffer manager functions */
+
+       struct {
+               struct {
+                       md5_one_block_t md5;
+                       /**< MD5 one block hash */
+                       sha1_one_block_t sha1;
+                       /**< SHA1 one block hash */
+                       sha224_one_block_t sha224;
+                       /**< SHA224 one block hash */
+                       sha256_one_block_t sha256;
+                       /**< SHA256 one block hash */
+                       sha384_one_block_t sha384;
+                       /**< SHA384 one block hash */
+                       sha512_one_block_t sha512;
+                       /**< SHA512 one block hash */
+               } one_block;
+               /**< one block hash functions */
+
+               struct {
+                       aes_keyexp_128_t aes128;
+                       /**< AES128 key expansions */
+                       aes_keyexp_192_t aes192;
+                       /**< AES192 key expansions */
+                       aes_keyexp_256_t aes256;
+                       /**< AES256 key expansions */
+
+                       aes_xcbc_expand_key_t aes_xcbc;
+                       /**< AES XCBC key expansions */
+               } keyexp;
+               /**< Key expansion functions */
+       } aux;
+       /**< Auxiliary functions */
+};
+
+
+static const struct aesni_mb_ops job_ops[] = {
+               [RTE_AESNI_MB_NOT_SUPPORTED] = {
+                       .job = {
+                               NULL
+                       },
+                       .aux = {
+                               .one_block = {
+                                       NULL
+                               },
+                               .keyexp = {
+                                       NULL
+                               }
+                       }
+               },
+               [RTE_AESNI_MB_SSE] = {
+                       .job = {
+                               init_mb_mgr_sse,
+                               get_next_job_sse,
+                               submit_job_sse,
+                               get_completed_job_sse,
+                               flush_job_sse
+                       },
+                       .aux = {
+                               .one_block = {
+                                       md5_one_block_sse,
+                                       sha1_one_block_sse,
+                                       sha224_one_block_sse,
+                                       sha256_one_block_sse,
+                                       sha384_one_block_sse,
+                                       sha512_one_block_sse
+                               },
+                               .keyexp = {
+                                       aes_keyexp_128_sse,
+                                       aes_keyexp_192_sse,
+                                       aes_keyexp_256_sse,
+                                       aes_xcbc_expand_key_sse
+                               }
+                       }
+               },
+               [RTE_AESNI_MB_AVX] = {
+                       .job = {
+                               init_mb_mgr_avx,
+                               get_next_job_avx,
+                               submit_job_avx,
+                               get_completed_job_avx,
+                               flush_job_avx
+                       },
+                       .aux = {
+                               .one_block = {
+                                       md5_one_block_avx,
+                                       sha1_one_block_avx,
+                                       sha224_one_block_avx,
+                                       sha256_one_block_avx,
+                                       sha384_one_block_avx,
+                                       sha512_one_block_avx
+                               },
+                               .keyexp = {
+                                       aes_keyexp_128_avx,
+                                       aes_keyexp_192_avx,
+                                       aes_keyexp_256_avx,
+                                       aes_xcbc_expand_key_avx
+                               }
+                       }
+               },
+               [RTE_AESNI_MB_AVX2] = {
+                       .job = {
+                               init_mb_mgr_avx2,
+                               get_next_job_avx2,
+                               submit_job_avx2,
+                               get_completed_job_avx2,
+                               flush_job_avx2
+                       },
+                       .aux = {
+                               .one_block = {
+                                       md5_one_block_avx2,
+                                       sha1_one_block_avx2,
+                                       sha224_one_block_avx2,
+                                       sha256_one_block_avx2,
+                                       sha384_one_block_avx2,
+                                       sha512_one_block_avx2
+                               },
+                               .keyexp = {
+                                       aes_keyexp_128_avx2,
+                                       aes_keyexp_192_avx2,
+                                       aes_keyexp_256_avx2,
+                                       aes_xcbc_expand_key_avx2
+                               }
+                       }
+               }
+};
+
+
+#endif /* _AESNI_MB_OPS_H_ */
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c 
b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
new file mode 100644
index 0000000..d8ccf05
--- /dev/null
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
@@ -0,0 +1,669 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2015 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_config.h>
+#include <rte_hexdump.h>
+#include <rte_cryptodev.h>
+#include <rte_cryptodev_pmd.h>
+#include <rte_dev.h>
+#include <rte_malloc.h>
+#include <rte_cpuflags.h>
+#include <rte_mbuf_offload.h>
+
+#include "rte_aesni_mb_pmd_private.h"
+
+/**
+ * Global static parameter used to create a unique name for each AES-NI multi
+ * buffer crypto device.
+ */
+static unsigned unique_name_id;
+
+static inline int
+create_unique_device_name(char *name, size_t size)
+{
+       int ret;
+
+       if (name == NULL)
+               return -EINVAL;
+
+       ret = snprintf(name, size, "%s_%u", CRYPTODEV_NAME_AESNI_MB_PMD,
+                       unique_name_id++);
+       if (ret < 0)
+               return ret;
+       return 0;
+}
+
+typedef void (*hash_one_block_t)(void *data, void *digest);
+typedef void (*aes_keyexp_t)(void *key, void *enc_exp_keys, void 
*dec_exp_keys);
+
+/**
+ * Calculate the authentication pre-computes
+ *
+ * @param one_block_hash       Function pointer to calculate digest on 
ipad/opad
+ * @param ipad                 Inner pad output byte array
+ * @param opad                 Outer pad output byte array
+ * @param hkey                 Authentication key
+ * @param hkey_len             Authentication key length
+ * @param blocksize            Block size of selected hash algo
+ */
+static void
+calculate_auth_precomputes(hash_one_block_t one_block_hash,
+               uint8_t *ipad, uint8_t *opad,
+               uint8_t *hkey, uint16_t hkey_len,
+               uint16_t blocksize)
+{
+       unsigned i, length;
+
+       uint8_t ipad_buf[blocksize] __rte_aligned(16);
+       uint8_t opad_buf[blocksize] __rte_aligned(16);
+
+       /* Setup inner and outer pads */
+       memset(ipad_buf, HMAC_IPAD_VALUE, blocksize);
+       memset(opad_buf, HMAC_OPAD_VALUE, blocksize);
+
+       /* XOR hash key with inner and outer pads */
+       length = hkey_len > blocksize ? blocksize : hkey_len;
+
+       for (i = 0; i < length; i++) {
+               ipad_buf[i] ^= hkey[i];
+               opad_buf[i] ^= hkey[i];
+       }
+
+       /* Compute partial hashes */
+       (*one_block_hash)(ipad_buf, ipad);
+       (*one_block_hash)(opad_buf, opad);
+
+       /* Clean up stack */
+       memset(ipad_buf, 0, blocksize);
+       memset(opad_buf, 0, blocksize);
+}
+
+/** Get xform chain order */
+static int
+aesni_mb_get_chain_order(const struct rte_crypto_xform *xform)
+{
+       /*
+        * Multi-buffer only supports HASH_CIPHER or CIPHER_HASH chained
+        * operations, all other options are invalid, so we must have exactly
+        * 2 xform structs chained together
+        */
+       if (xform->next == NULL || xform->next->next != NULL)
+               return -1;
+
+       if (xform->type == RTE_CRYPTO_XFORM_AUTH &&
+                       xform->next->type == RTE_CRYPTO_XFORM_CIPHER)
+               return HASH_CIPHER;
+
+       if (xform->type == RTE_CRYPTO_XFORM_CIPHER &&
+                               xform->next->type == RTE_CRYPTO_XFORM_AUTH)
+               return CIPHER_HASH;
+
+       return -1;
+}
+
+/** Set session authentication parameters */
+static int
+aesni_mb_set_session_auth_parameters(const struct aesni_mb_ops *mb_ops,
+               struct aesni_mb_session *sess,
+               const struct rte_crypto_xform *xform)
+{
+       hash_one_block_t hash_oneblock_fn;
+
+       if (xform->type != RTE_CRYPTO_XFORM_AUTH) {
+               MB_LOG_ERR("Crypto xform struct not of type auth");
+               return -1;
+       }
+
+       /* Set Authentication Parameters */
+       if (xform->auth.algo == RTE_CRYPTO_AUTH_AES_XCBC_MAC) {
+               sess->auth.algo = AES_XCBC;
+               (*mb_ops->aux.keyexp.aes_xcbc)(xform->auth.key.data,
+                               sess->auth.xcbc.k1_expanded,
+                               sess->auth.xcbc.k2, sess->auth.xcbc.k3);
+               return 0;
+       }
+
+       switch (xform->auth.algo) {
+       case RTE_CRYPTO_AUTH_MD5_HMAC:
+               sess->auth.algo = MD5;
+               hash_oneblock_fn = mb_ops->aux.one_block.md5;
+               break;
+       case RTE_CRYPTO_AUTH_SHA1_HMAC:
+               sess->auth.algo = SHA1;
+               hash_oneblock_fn = mb_ops->aux.one_block.sha1;
+               break;
+       case RTE_CRYPTO_AUTH_SHA224_HMAC:
+               sess->auth.algo = SHA_224;
+               hash_oneblock_fn = mb_ops->aux.one_block.sha224;
+               break;
+       case RTE_CRYPTO_AUTH_SHA256_HMAC:
+               sess->auth.algo = SHA_256;
+               hash_oneblock_fn = mb_ops->aux.one_block.sha256;
+               break;
+       case RTE_CRYPTO_AUTH_SHA384_HMAC:
+               sess->auth.algo = SHA_384;
+               hash_oneblock_fn = mb_ops->aux.one_block.sha384;
+               break;
+       case RTE_CRYPTO_AUTH_SHA512_HMAC:
+               sess->auth.algo = SHA_512;
+               hash_oneblock_fn = mb_ops->aux.one_block.sha512;
+               break;
+       default:
+               MB_LOG_ERR("Unsupported authentication algorithm selection");
+               return -1;
+       }
+
+       /* Calculate Authentication precomputes */
+       calculate_auth_precomputes(hash_oneblock_fn,
+                       sess->auth.pads.inner, sess->auth.pads.outer,
+                       xform->auth.key.data,
+                       xform->auth.key.length,
+                       get_auth_algo_blocksize(sess->auth.algo));
+
+       return 0;
+}
+
+/** Set session cipher parameters */
+static int
+aesni_mb_set_session_cipher_parameters(const struct aesni_mb_ops *mb_ops,
+               struct aesni_mb_session *sess,
+               const struct rte_crypto_xform *xform)
+{
+       aes_keyexp_t aes_keyexp_fn;
+
+       if (xform->type != RTE_CRYPTO_XFORM_CIPHER) {
+               MB_LOG_ERR("Crypto xform struct not of type cipher");
+               return -1;
+       }
+
+       /* Select cipher direction */
+       switch (xform->cipher.op) {
+       case RTE_CRYPTO_CIPHER_OP_ENCRYPT:
+               sess->cipher.direction = ENCRYPT;
+               break;
+       case RTE_CRYPTO_CIPHER_OP_DECRYPT:
+               sess->cipher.direction = DECRYPT;
+               break;
+       default:
+               MB_LOG_ERR("Unsupported cipher operation parameter");
+               return -1;
+       }
+
+       /* Select cipher mode */
+       switch (xform->cipher.algo) {
+       case RTE_CRYPTO_CIPHER_AES_CBC:
+               sess->cipher.mode = CBC;
+               break;
+       default:
+               MB_LOG_ERR("Unsupported cipher mode parameter");
+               return -1;
+       }
+
+       /* Check key length and choose key expansion function */
+       switch (xform->cipher.key.length) {
+       case AES_128_BYTES:
+               sess->cipher.key_length_in_bytes = AES_128_BYTES;
+               aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
+               break;
+       case AES_192_BYTES:
+               sess->cipher.key_length_in_bytes = AES_192_BYTES;
+               aes_keyexp_fn = mb_ops->aux.keyexp.aes192;
+               break;
+       case AES_256_BYTES:
+               sess->cipher.key_length_in_bytes = AES_256_BYTES;
+               aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
+               break;
+       default:
+               MB_LOG_ERR("Unsupported cipher key length");
+               return -1;
+       }
+
+       /* Expanded cipher keys */
+       (*aes_keyexp_fn)(xform->cipher.key.data,
+                       sess->cipher.expanded_aes_keys.encode,
+                       sess->cipher.expanded_aes_keys.decode);
+
+       return 0;
+}
+
+/** Parse crypto xform chain and set private session parameters */
+int
+aesni_mb_set_session_parameters(const struct aesni_mb_ops *mb_ops,
+               struct aesni_mb_session *sess,
+               const struct rte_crypto_xform *xform)
+{
+       const struct rte_crypto_xform *auth_xform = NULL;
+       const struct rte_crypto_xform *cipher_xform = NULL;
+
+       /* Select Crypto operation - hash then cipher / cipher then hash */
+       switch (aesni_mb_get_chain_order(xform)) {
+       case HASH_CIPHER:
+               sess->chain_order = HASH_CIPHER;
+               auth_xform = xform;
+               cipher_xform = xform->next;
+               break;
+       case CIPHER_HASH:
+               sess->chain_order = CIPHER_HASH;
+               auth_xform = xform->next;
+               cipher_xform = xform;
+               break;
+       default:
+               MB_LOG_ERR("Unsupported operation chain order parameter");
+               return -1;
+       }
+
+       if (aesni_mb_set_session_auth_parameters(mb_ops, sess, auth_xform)) {
+               MB_LOG_ERR("Invalid/unsupported authentication parameters");
+               return -1;
+       }
+
+       if (aesni_mb_set_session_cipher_parameters(mb_ops, sess,
+                       cipher_xform)) {
+               MB_LOG_ERR("Invalid/unsupported cipher parameters");
+               return -1;
+       }
+       return 0;
+}
+
+/** Get multi buffer session */
+static struct aesni_mb_session *
+get_session(struct aesni_mb_qp *qp, struct rte_crypto_op *crypto_op)
+{
+       struct aesni_mb_session *sess;
+
+       if (crypto_op->type == RTE_CRYPTO_OP_WITH_SESSION) {
+               if (unlikely(crypto_op->session->type !=
+                               RTE_CRYPTODEV_AESNI_MB_PMD))
+                       return NULL;
+
+               sess = (struct aesni_mb_session *)crypto_op->session->_private;
+       } else  {
+               struct rte_cryptodev_session *c_sess = NULL;
+
+               if (rte_mempool_get(qp->sess_mp, (void **)&c_sess))
+                       return NULL;
+
+               sess = (struct aesni_mb_session *)c_sess->_private;
+
+               if (unlikely(aesni_mb_set_session_parameters(qp->ops,
+                               sess, crypto_op->xform) != 0))
+                       return NULL;
+       }
+
+       return sess;
+}
+
+/**
+ * Process a crypto operation and complete a JOB_AES_HMAC job structure for
+ * submission to the multi buffer library for processing.
+ *
+ * @param      qp      queue pair
+ * @param      job     JOB_AES_HMAC structure to fill
+ * @param      m       mbuf to process
+ *
+ * @return
+ * - Completed JOB_AES_HMAC structure pointer on success
+ * - NULL pointer if completion of JOB_AES_HMAC structure isn't possible
+ */
+static JOB_AES_HMAC *
+process_crypto_op(struct aesni_mb_qp *qp, struct rte_mbuf *m,
+               struct rte_crypto_op *c_op, struct aesni_mb_session *session)
+{
+       JOB_AES_HMAC *job;
+
+       job = (*qp->ops->job.get_next)(&qp->mb_mgr);
+       if (unlikely(job == NULL))
+               return job;
+
+       /* Set crypto operation */
+       job->chain_order = session->chain_order;
+
+       /* Set cipher parameters */
+       job->cipher_direction = session->cipher.direction;
+       job->cipher_mode = session->cipher.mode;
+
+       job->aes_key_len_in_bytes = session->cipher.key_length_in_bytes;
+       job->aes_enc_key_expanded = session->cipher.expanded_aes_keys.encode;
+       job->aes_dec_key_expanded = session->cipher.expanded_aes_keys.decode;
+
+
+       /* Set authentication parameters */
+       job->hash_alg = session->auth.algo;
+       if (job->hash_alg == AES_XCBC) {
+               job->_k1_expanded = session->auth.xcbc.k1_expanded;
+               job->_k2 = session->auth.xcbc.k2;
+               job->_k3 = session->auth.xcbc.k3;
+       } else {
+               job->hashed_auth_key_xor_ipad = session->auth.pads.inner;
+               job->hashed_auth_key_xor_opad = session->auth.pads.outer;
+       }
+
+       /* Mutable crypto operation parameters */
+
+       /* Set digest output location */
+       if (job->cipher_direction == DECRYPT) {
+               job->auth_tag_output = (uint8_t *)rte_pktmbuf_append(m,
+                               get_digest_byte_length(job->hash_alg));
+
+               if (job->auth_tag_output)
+                       memset(job->auth_tag_output, 0,
+                               sizeof(get_digest_byte_length(job->hash_alg)));
+               else
+                       return NULL;
+       } else {
+               job->auth_tag_output = c_op->digest.data;
+       }
+
+       /*
+        * Multiple buffer library current only support returning a truncated
+        * digest length as specified in the relevant IPsec RFCs
+        */
+       job->auth_tag_output_len_in_bytes =
+                       get_truncated_digest_byte_length(job->hash_alg);
+
+       /* Set IV parameters */
+       job->iv = c_op->iv.data;
+       job->iv_len_in_bytes = c_op->iv.length;
+
+       /* Data  Parameter */
+       job->src = rte_pktmbuf_mtod(m, uint8_t *);
+       job->dst = c_op->dst.m ?
+                       rte_pktmbuf_mtod(c_op->dst.m, uint8_t *) +
+                       c_op->dst.offset :
+                       rte_pktmbuf_mtod(m, uint8_t *) +
+                       c_op->data.to_cipher.offset;
+
+       job->cipher_start_src_offset_in_bytes = c_op->data.to_cipher.offset;
+       job->msg_len_to_cipher_in_bytes = c_op->data.to_cipher.length;
+
+       job->hash_start_src_offset_in_bytes = c_op->data.to_hash.offset;
+       job->msg_len_to_hash_in_bytes = c_op->data.to_hash.length;
+
+       /* Set user data to be crypto operation data struct */
+       job->user_data = m;
+       job->user_data2 = c_op;
+
+       return job;
+}
+
+/**
+ * Process a completed job and return rte_mbuf which job processed
+ *
+ * @param job  JOB_AES_HMAC job to process
+ *
+ * @return
+ * - Returns processed mbuf which is trimmed of output digest used in
+ * verification of supplied digest in the case of a HASH_CIPHER operation
+ * - Returns NULL on invalid job
+ */
+static struct rte_mbuf *
+post_process_mb_job(struct aesni_mb_qp *qp, JOB_AES_HMAC *job)
+{
+       struct rte_mbuf *m;
+       struct rte_crypto_op *c_op;
+
+       if (job->user_data == NULL)
+               return NULL;
+
+       /* handled retrieved job */
+       m = (struct rte_mbuf *)job->user_data;
+       c_op = (struct rte_crypto_op *)job->user_data2;
+
+       /* set status as successful by default */
+       c_op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+
+       /* check if job has been processed  */
+       if (unlikely(job->status != STS_COMPLETED)) {
+               c_op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+               return m;
+       } else if (job->chain_order == HASH_CIPHER) {
+               /* Verify digest if required */
+               if (memcmp(job->auth_tag_output, c_op->digest.data,
+                               job->auth_tag_output_len_in_bytes) != 0)
+                       c_op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+
+               /* trim area used for digest from mbuf */
+               rte_pktmbuf_trim(m, get_digest_byte_length(job->hash_alg));
+       }
+
+       /* Free session if a session-less crypto op */
+       if (c_op->type == RTE_CRYPTO_OP_SESSIONLESS) {
+               rte_mempool_put(qp->sess_mp, c_op->session);
+               c_op->session = NULL;
+       }
+
+       return m;
+}
+
+/**
+ * Process a completed JOB_AES_HMAC job and keep processing jobs until
+ * get_completed_job return NULL
+ *
+ * @param qp           Queue Pair to process
+ * @param job          JOB_AES_HMAC job
+ *
+ * @return
+ * - Number of processed jobs
+ */
+static unsigned
+handle_completed_jobs(struct aesni_mb_qp *qp, JOB_AES_HMAC *job)
+{
+       struct rte_mbuf *m = NULL;
+       unsigned processed_jobs = 0;
+
+       while (job) {
+               processed_jobs++;
+               m = post_process_mb_job(qp, job);
+               if (m)
+                       rte_ring_enqueue(qp->processed_pkts, (void *)m);
+               else
+                       qp->qp_stats.dequeue_err_count++;
+
+               job = (*qp->ops->job.get_completed_job)(&qp->mb_mgr);
+       }
+
+       return processed_jobs;
+}
+
+static uint16_t
+aesni_mb_pmd_enqueue_burst(void *queue_pair, struct rte_mbuf **bufs,
+               uint16_t nb_bufs)
+{
+       struct rte_mbuf_offload *ol;
+
+       struct aesni_mb_session *sess;
+       struct aesni_mb_qp *qp = queue_pair;
+
+       JOB_AES_HMAC *job = NULL;
+
+       int i, processed_jobs = 0;
+
+       for (i = 0; i < nb_bufs; i++) {
+               ol = rte_pktmbuf_offload_get(bufs[i], RTE_PKTMBUF_OL_CRYPTO);
+               if (unlikely(ol == NULL)) {
+                       qp->qp_stats.enqueue_err_count++;
+                       goto flush_jobs;
+               }
+
+               sess = get_session(qp, &ol->op.crypto);
+               if (unlikely(sess == NULL)) {
+                       qp->qp_stats.enqueue_err_count++;
+                       goto flush_jobs;
+               }
+
+               job = process_crypto_op(qp, bufs[i], &ol->op.crypto, sess);
+               if (unlikely(job == NULL)) {
+                       qp->qp_stats.enqueue_err_count++;
+                       goto flush_jobs;
+               }
+
+               /* Submit Job */
+               job = (*qp->ops->job.submit)(&qp->mb_mgr);
+
+               /*
+                * If submit returns a processed job then handle it,
+                * before submitting subsequent jobs
+                */
+               if (job)
+                       processed_jobs += handle_completed_jobs(qp, job);
+       }
+
+       if (processed_jobs == 0)
+               goto flush_jobs;
+       else
+               qp->qp_stats.enqueued_count += processed_jobs;
+               return i;
+
+flush_jobs:
+       /*
+        * If we haven't processed any jobs in submit loop, then flush jobs
+        * queue to stop the output stalling
+        */
+       job = (*qp->ops->job.flush_job)(&qp->mb_mgr);
+       if (job)
+               qp->qp_stats.enqueued_count += handle_completed_jobs(qp, job);
+
+       return i;
+}
+
+static uint16_t
+aesni_mb_pmd_dequeue_burst(void *queue_pair,
+               struct rte_mbuf **bufs, uint16_t nb_bufs)
+{
+       struct aesni_mb_qp *qp = queue_pair;
+
+       unsigned nb_dequeued;
+
+       nb_dequeued = rte_ring_dequeue_burst(qp->processed_pkts,
+                       (void **)bufs, nb_bufs);
+       qp->qp_stats.dequeued_count += nb_dequeued;
+
+       return nb_dequeued;
+}
+
+
+static int cryptodev_aesni_mb_uninit(const char *name);
+
+static int
+cryptodev_aesni_mb_create(const char *name, unsigned socket_id)
+{
+       struct rte_cryptodev *dev;
+       char crypto_dev_name[RTE_CRYPTODEV_NAME_MAX_LEN];
+       struct aesni_mb_private *internals;
+       enum aesni_mb_vector_mode vector_mode;
+
+       /* Check CPU for support for AES instruction set */
+       if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_AES)) {
+               MB_LOG_ERR("AES instructions not supported by CPU");
+               return -EFAULT;
+       }
+
+       /* Check CPU for supported vector instruction set */
+       if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
+               vector_mode = RTE_AESNI_MB_AVX2;
+       else if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX))
+               vector_mode = RTE_AESNI_MB_AVX;
+       else if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
+               vector_mode = RTE_AESNI_MB_SSE;
+       else {
+               MB_LOG_ERR("Vector instructions are not supported by CPU");
+               return -EFAULT;
+       }
+
+       /* create a unique device name */
+       if (create_unique_device_name(crypto_dev_name,
+                       RTE_CRYPTODEV_NAME_MAX_LEN) != 0) {
+               MB_LOG_ERR("failed to create unique cryptodev name");
+               return -EINVAL;
+       }
+
+
+       dev = rte_cryptodev_pmd_virtual_dev_init(crypto_dev_name,
+                       sizeof(struct aesni_mb_private), socket_id);
+       if (dev == NULL) {
+               MB_LOG_ERR("failed to create cryptodev vdev");
+               goto init_error;
+       }
+
+       dev->dev_type = RTE_CRYPTODEV_AESNI_MB_PMD;
+       dev->dev_ops = rte_aesni_mb_pmd_ops;
+
+       /* register rx/tx burst functions for data path */
+       dev->dequeue_burst = aesni_mb_pmd_dequeue_burst;
+       dev->enqueue_burst = aesni_mb_pmd_enqueue_burst;
+
+       /* Set vector instructions mode supported */
+       internals = dev->data->dev_private;
+
+       internals->vector_mode = vector_mode;
+       internals->max_nb_queue_pairs = RTE_AESNI_MB_PMD_MAX_NB_QUEUE_PAIRS;
+       internals->max_nb_sessions = RTE_AESNI_MB_PMD_MAX_NB_SESSIONS;
+
+       return dev->data->dev_id;
+init_error:
+       MB_LOG_ERR("driver %s: cryptodev_aesni_create failed", name);
+
+       cryptodev_aesni_mb_uninit(crypto_dev_name);
+       return -EFAULT;
+}
+
+
+static int
+cryptodev_aesni_mb_init(const char *name,
+               const char *params __rte_unused)
+{
+       RTE_LOG(INFO, PMD, "Initialising %s\n", name);
+
+       return cryptodev_aesni_mb_create(name, rte_socket_id());
+}
+
+static int
+cryptodev_aesni_mb_uninit(const char *name)
+{
+       if (name == NULL)
+               return -EINVAL;
+
+       RTE_LOG(INFO, PMD, "Closing AESNI crypto device %s on numa socket %u\n",
+                       name, rte_socket_id());
+
+       return 0;
+}
+
+static struct rte_driver cryptodev_aesni_mb_pmd_drv = {
+       .name = CRYPTODEV_NAME_AESNI_MB_PMD,
+       .type = PMD_VDEV,
+       .init = cryptodev_aesni_mb_init,
+       .uninit = cryptodev_aesni_mb_uninit
+};
+
+PMD_REGISTER_DRIVER(cryptodev_aesni_mb_pmd_drv);
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c 
b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
new file mode 100644
index 0000000..96d22f6
--- /dev/null
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
@@ -0,0 +1,298 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2015 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_cryptodev_pmd.h>
+
+#include "rte_aesni_mb_pmd_private.h"
+
+/** Configure device */
+static int
+aesni_mb_pmd_config(__rte_unused struct rte_cryptodev *dev)
+{
+       return 0;
+}
+
+/** Start device */
+static int
+aesni_mb_pmd_start(__rte_unused struct rte_cryptodev *dev)
+{
+       return 0;
+}
+
+/** Stop device */
+static void
+aesni_mb_pmd_stop(__rte_unused struct rte_cryptodev *dev)
+{
+}
+
+/** Close device */
+static int
+aesni_mb_pmd_close(__rte_unused struct rte_cryptodev *dev)
+{
+       return 0;
+}
+
+
+/** Get device statistics */
+static void
+aesni_mb_pmd_stats_get(struct rte_cryptodev *dev,
+               struct rte_cryptodev_stats *stats)
+{
+       int qp_id;
+
+       for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+               struct aesni_mb_qp *qp = dev->data->queue_pairs[qp_id];
+
+               stats->enqueued_count += qp->qp_stats.enqueued_count;
+               stats->dequeued_count += qp->qp_stats.dequeued_count;
+
+               stats->enqueue_err_count += qp->qp_stats.enqueue_err_count;
+               stats->dequeue_err_count += qp->qp_stats.dequeue_err_count;
+       }
+}
+
+/** Reset device statistics */
+static void
+aesni_mb_pmd_stats_reset(struct rte_cryptodev *dev)
+{
+       int qp_id;
+
+       for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+               struct aesni_mb_qp *qp = dev->data->queue_pairs[qp_id];
+
+               memset(&qp->qp_stats, 0, sizeof(qp->qp_stats));
+       }
+}
+
+
+/** Get device info */
+static void
+aesni_mb_pmd_info_get(struct rte_cryptodev *dev,
+               struct rte_cryptodev_info *dev_info)
+{
+       struct aesni_mb_private *internals = dev->data->dev_private;
+
+       if (dev_info != NULL) {
+               dev_info->dev_type = dev->dev_type;
+               dev_info->max_nb_queue_pairs = internals->max_nb_queue_pairs;
+               dev_info->max_nb_sessions = internals->max_nb_sessions;
+       }
+}
+
+/** Release queue pair */
+static int
+aesni_mb_pmd_qp_release(struct rte_cryptodev *dev, uint16_t qp_id)
+{
+       if (dev->data->queue_pairs[qp_id] != NULL) {
+               rte_free(dev->data->queue_pairs[qp_id]);
+               dev->data->queue_pairs[qp_id] = NULL;
+       }
+       return 0;
+}
+
+/** set a unique name for the queue pair based on it's name, dev_id and qp_id 
*/
+static int
+aesni_mb_pmd_qp_set_unique_name(struct rte_cryptodev *dev,
+               struct aesni_mb_qp *qp)
+{
+       unsigned n = snprintf(qp->name, sizeof(qp->name),
+                       "aesni_mb_pmd_%u_qp_%u",
+                       dev->data->dev_id, qp->id);
+
+       if (n > sizeof(qp->name))
+               return -1;
+
+       return 0;
+}
+
+/** Create a ring to place process packets on */
+static struct rte_ring *
+aesni_mb_pmd_qp_create_processed_pkts_ring(struct aesni_mb_qp *qp,
+               unsigned ring_size, int socket_id)
+{
+       struct rte_ring *r;
+
+       r = rte_ring_lookup(qp->name);
+       if (r) {
+               if (r->prod.size >= ring_size) {
+                       MB_LOG_INFO("Reusing existing ring %s for processed 
packets",
+                                        qp->name);
+                       return r;
+               }
+
+               MB_LOG_ERR("Unable to reuse existing ring %s for processed 
packets",
+                                qp->name);
+               return NULL;
+       }
+
+       return rte_ring_create(qp->name, ring_size, socket_id,
+                       RING_F_SP_ENQ | RING_F_SC_DEQ);
+}
+
+/** Setup a queue pair */
+static int
+aesni_mb_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
+               const struct rte_cryptodev_qp_conf *qp_conf,
+                int socket_id)
+{
+       struct aesni_mb_qp *qp = NULL;
+       struct aesni_mb_private *internals = dev->data->dev_private;
+
+       /* Free memory prior to re-allocation if needed. */
+       if (dev->data->queue_pairs[qp_id] != NULL)
+               aesni_mb_pmd_qp_release(dev, qp_id);
+
+       /* Allocate the queue pair data structure. */
+       qp = rte_zmalloc_socket("AES-NI PMD Queue Pair", sizeof(*qp),
+                                       RTE_CACHE_LINE_SIZE, socket_id);
+       if (qp == NULL)
+               return (-ENOMEM);
+
+       qp->id = qp_id;
+       dev->data->queue_pairs[qp_id] = qp;
+
+       if (aesni_mb_pmd_qp_set_unique_name(dev, qp))
+               goto qp_setup_cleanup;
+
+       qp->ops = &job_ops[internals->vector_mode];
+
+       qp->processed_pkts = aesni_mb_pmd_qp_create_processed_pkts_ring(qp,
+                       qp_conf->nb_descriptors, socket_id);
+       if (qp->processed_pkts == NULL)
+               goto qp_setup_cleanup;
+
+       qp->sess_mp = dev->data->session_pool;
+
+       memset(&qp->qp_stats, 0, sizeof(qp->qp_stats));
+
+       /* Initialise multi-buffer manager */
+       (*qp->ops->job.init_mgr)(&qp->mb_mgr);
+
+       return 0;
+
+qp_setup_cleanup:
+       if (qp)
+               rte_free(qp);
+
+       return -1;
+}
+
+/** Start queue pair */
+static int
+aesni_mb_pmd_qp_start(__rte_unused struct rte_cryptodev *dev,
+               __rte_unused uint16_t queue_pair_id)
+{
+       return -ENOTSUP;
+}
+
+/** Stop queue pair */
+static int
+aesni_mb_pmd_qp_stop(__rte_unused struct rte_cryptodev *dev,
+               __rte_unused uint16_t queue_pair_id)
+{
+       return -ENOTSUP;
+}
+
+/** Return the number of allocated queue pairs */
+static uint32_t
+aesni_mb_pmd_qp_count(struct rte_cryptodev *dev)
+{
+       return dev->data->nb_queue_pairs;
+}
+
+/** Returns the size of the aesni multi-buffer session structure */
+static unsigned
+aesni_mb_pmd_session_get_size(struct rte_cryptodev *dev __rte_unused)
+{
+       return sizeof(struct aesni_mb_session);
+}
+
+/** Configure a aesni multi-buffer session from a crypto xform chain */
+static void *
+aesni_mb_pmd_session_configure(struct rte_cryptodev *dev,
+               struct rte_crypto_xform *xform, void *sess)
+{
+       struct aesni_mb_private *internals = dev->data->dev_private;
+
+       if (unlikely(sess == NULL)) {
+               MB_LOG_ERR("invalid session struct");
+               return NULL;
+       }
+
+       if (aesni_mb_set_session_parameters(&job_ops[internals->vector_mode],
+                       sess, xform) != 0) {
+               MB_LOG_ERR("failed configure session parameters");
+               return NULL;
+       }
+
+       return sess;
+}
+
+/** Clear the memory of session so it doesn't leave key material behind */
+static void
+aesni_mb_pmd_session_clear(struct rte_cryptodev *dev __rte_unused, void *sess)
+{
+       /*
+        * Current just resetting the whole data structure, need to investigate
+        * whether a more selective reset of key would be more performant
+        */
+       if (sess)
+               memset(sess, 0, sizeof(struct aesni_mb_session));
+}
+
+struct rte_cryptodev_ops aesni_mb_pmd_ops = {
+               .dev_configure          = aesni_mb_pmd_config,
+               .dev_start              = aesni_mb_pmd_start,
+               .dev_stop               = aesni_mb_pmd_stop,
+               .dev_close              = aesni_mb_pmd_close,
+
+               .stats_get              = aesni_mb_pmd_stats_get,
+               .stats_reset            = aesni_mb_pmd_stats_reset,
+
+               .dev_infos_get          = aesni_mb_pmd_info_get,
+
+               .queue_pair_setup       = aesni_mb_pmd_qp_setup,
+               .queue_pair_release     = aesni_mb_pmd_qp_release,
+               .queue_pair_start       = aesni_mb_pmd_qp_start,
+               .queue_pair_stop        = aesni_mb_pmd_qp_stop,
+               .queue_pair_count       = aesni_mb_pmd_qp_count,
+
+               .session_get_size       = aesni_mb_pmd_session_get_size,
+               .session_configure      = aesni_mb_pmd_session_configure,
+               .session_clear          = aesni_mb_pmd_session_clear
+};
+
+struct rte_cryptodev_ops *rte_aesni_mb_pmd_ops = &aesni_mb_pmd_ops;
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h 
b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h
new file mode 100644
index 0000000..2f98609
--- /dev/null
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h
@@ -0,0 +1,229 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2015 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_AESNI_MB_PMD_PRIVATE_H_
+#define _RTE_AESNI_MB_PMD_PRIVATE_H_
+
+#include "aesni_mb_ops.h"
+
+#define MB_LOG_ERR(fmt, args...) \
+       RTE_LOG(ERR, CRYPTODEV, "[%s] %s() line %u: " fmt "\n",  \
+                       CRYPTODEV_NAME_AESNI_MB_PMD, \
+                       __func__, __LINE__, ## args)
+
+#ifdef RTE_LIBRTE_AESNI_MB_DEBUG
+#define MB_LOG_INFO(fmt, args...) \
+       RTE_LOG(INFO, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+                       CRYPTODEV_NAME_AESNI_MB_PMD, \
+                       __func__, __LINE__, ## args)
+
+#define MB_LOG_DBG(fmt, args...) \
+       RTE_LOG(DEBUG, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+                       CRYPTODEV_NAME_AESNI_MB_PMD, \
+                       __func__, __LINE__, ## args)
+#else
+#define MB_LOG_INFO(fmt, args...)
+#define MB_LOG_DBG(fmt, args...)
+#endif
+
+#define HMAC_IPAD_VALUE                        (0x36)
+#define HMAC_OPAD_VALUE                        (0x5C)
+
+static const unsigned auth_blocksize[] = {
+               [MD5]           = 64,
+               [SHA1]          = 64,
+               [SHA_224]       = 64,
+               [SHA_256]       = 64,
+               [SHA_384]       = 128,
+               [SHA_512]       = 128,
+               [AES_XCBC]      = 16,
+};
+
+/**
+ * Get the blocksize in bytes for a specified authentication algorithm
+ *
+ * @Note: this function will not return a valid value for a non-valid
+ * authentication algorithm
+ */
+static inline unsigned
+get_auth_algo_blocksize(JOB_HASH_ALG algo)
+{
+       return auth_blocksize[algo];
+}
+
+static const unsigned auth_truncated_digest_byte_lengths[] = {
+               [MD5]           = 12,
+               [SHA1]          = 12,
+               [SHA_224]       = 14,
+               [SHA_256]       = 16,
+               [SHA_384]       = 24,
+               [SHA_512]       = 32,
+               [AES_XCBC]      = 12,
+};
+
+/**
+ * Get the IPsec specified truncated length in bytes of the HMAC digest for a
+ * specified authentication algorithm
+ *
+ * @Note: this function will not return a valid value for a non-valid
+ * authentication algorithm
+ */
+static inline unsigned
+get_truncated_digest_byte_length(JOB_HASH_ALG algo)
+{
+       return auth_truncated_digest_byte_lengths[algo];
+}
+
+static const unsigned auth_digest_byte_lengths[] = {
+               [MD5]           = 16,
+               [SHA1]          = 20,
+               [SHA_224]       = 28,
+               [SHA_256]       = 32,
+               [SHA_384]       = 48,
+               [SHA_512]       = 64,
+               [AES_XCBC]      = 16,
+};
+
+/**
+ * Get the output digest size in bytes for a specified authentication algorithm
+ *
+ * @Note: this function will not return a valid value for a non-valid
+ * authentication algorithm
+ */
+static inline unsigned
+get_digest_byte_length(JOB_HASH_ALG algo)
+{
+       return auth_digest_byte_lengths[algo];
+}
+
+
+/** private data structure for each virtual AESNI device */
+struct aesni_mb_private {
+       enum aesni_mb_vector_mode vector_mode;
+       /**< CPU vector instruction set mode */
+       unsigned max_nb_queue_pairs;
+       /**< Max number of queue pairs supported by device */
+       unsigned max_nb_sessions;
+       /**< Max number of sessions supported by device */
+};
+
+/** AESNI Multi buffer queue pair */
+struct aesni_mb_qp {
+       uint16_t id;
+       /**< Queue Pair Identifier */
+       char name[RTE_CRYPTODEV_NAME_LEN];
+       /**< Unique Queue Pair Name */
+       const struct aesni_mb_ops *ops;
+       /**< Vector mode dependent pointer table of the multi-buffer APIs */
+       MB_MGR mb_mgr;
+       /**< Multi-buffer instance */
+       struct rte_ring *processed_pkts;
+       /**< Ring for placing process packets */
+       struct rte_mempool *sess_mp;
+       /**< Session Mempool */
+       struct rte_cryptodev_stats qp_stats;
+       /**< Queue pair statistics */
+} __rte_cache_aligned;
+
+
+/** AES-NI multi-buffer private session structure */
+struct aesni_mb_session {
+       JOB_CHAIN_ORDER chain_order;
+
+       /** Cipher Parameters */
+       struct {
+               /** Cipher direction - encrypt / decrypt */
+               JOB_CIPHER_DIRECTION direction;
+               /** Cipher mode - CBC / Counter */
+               JOB_CIPHER_MODE mode;
+
+               uint64_t key_length_in_bytes;
+
+               struct {
+                       uint32_t encode[60] __rte_aligned(16);
+                       /**< encode key */
+                       uint32_t decode[60] __rte_aligned(16);
+                       /**< decode key */
+               } expanded_aes_keys;
+               /**< Expanded AES keys - Allocating space to
+                * contain the maximum expanded key size which
+                * is 240 bytes for 256 bit AES, calculate by:
+                * ((key size (bytes)) *
+                * ((number of rounds) + 1))
+                */
+       } cipher;
+
+       /** Authentication Parameters */
+       struct {
+               JOB_HASH_ALG algo; /**< Authentication Algorithm */
+               union {
+                       struct {
+                               uint8_t inner[128] __rte_aligned(16);
+                               /**< inner pad */
+                               uint8_t outer[128] __rte_aligned(16);
+                               /**< outer pad */
+                       } pads;
+                       /**< HMAC Authentication pads -
+                        * allocating space for the maximum pad
+                        * size supported which is 128 bytes for
+                        * SHA512
+                        */
+
+                       struct {
+                           uint32_t k1_expanded[44] __rte_aligned(16);
+                           /**< k1 (expanded key). */
+                           uint8_t k2[16] __rte_aligned(16);
+                           /**< k2. */
+                           uint8_t k3[16] __rte_aligned(16);
+                           /**< k3. */
+                       } xcbc;
+                       /**< Expanded XCBC authentication keys */
+               };
+       } auth;
+} __rte_cache_aligned;
+
+
+/**
+ *
+ */
+extern int
+aesni_mb_set_session_parameters(const struct aesni_mb_ops *mb_ops,
+               struct aesni_mb_session *sess,
+               const struct rte_crypto_xform *xform);
+
+
+/** device specific operations function pointer structure */
+extern struct rte_cryptodev_ops *rte_aesni_mb_pmd_ops;
+
+
+
+#endif /* _RTE_AESNI_MB_PMD_PRIVATE_H_ */
diff --git a/drivers/crypto/aesni_mb/rte_pmd_aesni_version.map 
b/drivers/crypto/aesni_mb/rte_pmd_aesni_version.map
new file mode 100644
index 0000000..ad607bb
--- /dev/null
+++ b/drivers/crypto/aesni_mb/rte_pmd_aesni_version.map
@@ -0,0 +1,3 @@
+DPDK_2.2 {
+       local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index cfcb064..4a660e6 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -153,6 +153,10 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL)       += 
-lrte_pmd_null
 # QAT PMD has a dependency on libcrypto (from openssl) for calculating HMAC 
precomputes
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT)        += -lrte_pmd_qat -lcrypto

+# AESNI MULTI BUFFER is dependent on the IPSec_MB library
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB)   += -lrte_pmd_aesni_mb
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB)   += 
-L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
+
 endif # ! $(CONFIG_RTE_BUILD_SHARED_LIB)

 endif # ! CONFIG_RTE_BUILD_COMBINE_LIBS
-- 
2.4.3

Reply via email to