Sotiris, I've compiled MLNX_DPDK-2.1_1.1 on SLES12 3.12.28-4-default with OFED 3.1-1.0.3 with no issues. Also, no modifications were required - simply follow the quick start guide here - http://www.mellanox.com/page/products_dyn?product_family=209&mtag=pmd_for_dpdk
If you are still having issues please mail me directly and we'll sort it out. Thx. Gilad Berman | Staff System Engineer | Business Development | Mellanox Technologies Ltd. Work: +972 52 2554262| 6 Ha'Barzel St. Tel Aviv 6971010, Israel -----Original Message----- From: Olga Shern Sent: Sunday, November 22, 2015 3:45 PM To: Gilad Berman <giladb at mellanox.com>; Sotiris Salloumis <sotiris.salloumis at ericsson.com>; dev at dpdk.org Subject: RE: Mellanox dpdk issues Hi Sotiris, You can disable compilation of igb_uio, this module is not needed for Mellanox PMD. Let me know if you have any question Best Regards, Olga -----Original Message----- From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Gilad Berman Sent: Sunday, November 22, 2015 1:30 PM To: Sotiris Salloumis <sotiris.salloumis at ericsson.com>; dev at dpdk.org Subject: Re: [dpdk-dev] Mellanox dpdk issues Let us check and get back to you. Gilad Berman | Staff System Engineer | Business Development | Mellanox Technologies Ltd. Work: +972 52 2554262| 6 Ha'Barzel St. Tel Aviv 6971010, Israel -----Original Message----- From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Sotiris Salloumis Sent: Friday, November 20, 2015 7:35 PM To: dev at dpdk.org Subject: [dpdk-dev] Mellanox dpdk issues Hi all, I'm trying to build DPDK for Mellanox ( using MLNX_DPDK-2.1_1.1 ) but I get the following error following the guidelines i.e. make install T=x86_64-native-linuxapp-gcc == Build lib/librte_eal/linuxapp/igb_uio make[8]: *** /lib/modules/3.12.28-4-default/build: No such file or directory. Stop. /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.module.mk:79: recipe for target 'igb_uio.ko' failed make[7]: *** [igb_uio.ko] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'igb_uio' failed make[6]: *** [igb_uio] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'linuxapp' failed make[5]: *** [linuxapp] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'librte_eal' failed make[4]: *** [librte_eal] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkbuild.mk:93: recipe for target 'lib' failed make[3]: *** [lib] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:124: recipe for target 'all' failed make[2]: *** [all] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkinstall.mk:58: recipe for target 'x86_64-native-linuxapp-gcc_install' failed make[1]: *** [x86_64-native-linuxapp-gcc_install] Error 2 /root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:102: recipe for target 'install' failed make: *** [install] Error 2 The environment is SLES12 - Linux linux-okj7 3.12.28-4-default #1 SMP Thu Sep 25 17:02:34 UTC 2014 (9879bd4) x86_64 x86_64 x86_64 GNU/Linux - 3.12.28-4-default >From Mellanox point of view the only difference I see is related with firmware >version ---- Performing Adapter Device Self Test ---- Number of CAs Detected ................. 1 PCI Device Check ....................... PASS Kernel Arch ............................ x86_64 Host Driver Version .................... MLNX_OFED_LINUX-3.1-1.0.3 (OFED-3.1-1.0.3): 3.12.28-4-default Host Driver RPM Check .................. PASS Firmware on CA #0 NIC .................. v2.35.5130 Firmware Check on CA #0 (NIC) .......... PASS NOTE: The found fw version is higher than the fw included in this package (v2.35.5100) Host Driver Initialization ............. PASS Number of CA Ports Active .............. 2 Port State of Port #1 on CA #0 (NIC)..... UP 1X QDR (Ethernet) Port State of Port #2 on CA #0 (NIC)..... UP 1X QDR (Ethernet) Error Counter Check on CA #0 (NIC)...... NA (Eth ports) Kernel Syslog Check .................... PASS Node GUID on CA #0 (NIC) ............... a0:1d:48:03:00:b5:a6:17 ------------------ DONE --------------------- Any hints? Thanks Sotiris