Co-authored-by: Des O Dea <des.j.o.dea at intel.com>
Co-authored-by: John Griffin <john.griffin at intel.com>
Co-authored-by: Fiona Trahe <fiona.trahe at intel.com>
This patch contains the initial proposed APIs and device framework for
integrating crypto packet processing into DPDK.
features include:
- Crypto device configuration / management APIs
- Definitions of supported cipher algorithms and operations.
- Definitions of supported hash/authentication algorithms and
operations.
- Crypto session management APIs
- Crypto operation data structures and APIs allocation of crypto
operation structure used to specify the crypto operations to
be performed on a particular mbuf.
- Extension of mbuf to contain crypto operation data pointer and
extra flags.
- Burst enqueue / dequeue APIs for processing of crypto operations.
changes from RFC:
- Session management API changes to support specification of crypto
transform(xform) chains using linked list of xforms.
- Changes to the crypto operation struct as a result of session
management changes.
- Some movement of common MACROS shared by cryptodevs and ethdevs to
common headers
Signed-off-by: Declan Doherty <declan.doherty at intel.com>
---
config/common_bsdapp | 7 +
config/common_linuxapp | 10 +-
doc/api/doxy-api-index.md | 1 +
doc/api/doxy-api.conf | 1 +
lib/Makefile | 1 +
lib/librte_cryptodev/Makefile | 60 ++
lib/librte_cryptodev/rte_crypto.h | 720 +++++++++++++++++
lib/librte_cryptodev/rte_crypto_version.map | 40 +
lib/librte_cryptodev/rte_cryptodev.c | 1126 +++++++++++++++++++++++++++
lib/librte_cryptodev/rte_cryptodev.h | 592 ++++++++++++++
lib/librte_cryptodev/rte_cryptodev_pmd.h | 577 ++++++++++++++
lib/librte_eal/common/include/rte_common.h | 15 +
lib/librte_eal/common/include/rte_eal.h | 14 +
lib/librte_eal/common/include/rte_log.h | 1 +
lib/librte_eal/common/include/rte_memory.h | 14 +-
lib/librte_ether/rte_ethdev.c | 30 -
lib/librte_mbuf/rte_mbuf.c | 1 +
lib/librte_mbuf/rte_mbuf.h | 53 +-
mk/rte.app.mk | 1 +
19 files changed, 3230 insertions(+), 34 deletions(-)
create mode 100644 lib/librte_cryptodev/Makefile
create mode 100644 lib/librte_cryptodev/rte_crypto.h
create mode 100644 lib/librte_cryptodev/rte_crypto_version.map
create mode 100644 lib/librte_cryptodev/rte_cryptodev.c
create mode 100644 lib/librte_cryptodev/rte_cryptodev.h
create mode 100644 lib/librte_cryptodev/rte_cryptodev_pmd.h
diff --git a/config/common_bsdapp b/config/common_bsdapp
index b37dcf4..3313a8e 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -147,6 +147,13 @@ CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
#
+# Compile generic Crypto device library
+#
+CONFIG_RTE_LIBRTE_CRYPTODEV=y
+CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=y
+CONFIG_RTE_MAX_CRYPTOPORTS=32
+
+#
# Support NIC bypass logic
#
CONFIG_RTE_NIC_BYPASS=n
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 0de43d5..4ba0299 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -1,6 +1,6 @@
# BSD LICENSE
#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
@@ -145,6 +145,14 @@ CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
#
+# Compile generic Crypto device library
+#
+CONFIG_RTE_LIBRTE_CRYPTODEV=y
+CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=y
+CONFIG_RTE_CRYPTO_MAX_DEVS=64
+CONFIG_RTE_CRYPTO_MAX_XFORM_CHAIN_LENGTH=2
+
+#
# Support NIC bypass logic
#
CONFIG_RTE_NIC_BYPASS=n
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index 72ac3c4..bdb6130 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -39,6 +39,7 @@ There are many libraries, so their headers may be grouped by
topics:
[dev] (@ref rte_dev.h),
[ethdev] (@ref rte_ethdev.h),
[ethctrl] (@ref rte_eth_ctrl.h),
+ [cryptodev] (@ref rte_cryptodev.h),
[devargs] (@ref rte_devargs.h),
[bond] (@ref rte_eth_bond.h),
[vhost] (@ref rte_virtio_net.h),
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index cfb4627..7244b8f 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -37,6 +37,7 @@ INPUT = doc/api/doxy-api-index.md \
lib/librte_cfgfile \
lib/librte_cmdline \
lib/librte_compat \
+ lib/librte_cryptodev \
lib/librte_distributor \
lib/librte_ether \
lib/librte_hash \
diff --git a/lib/Makefile b/lib/Makefile
index 9727b83..4c5c1b4 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -40,6 +40,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_TIMER) += librte_timer
DIRS-$(CONFIG_RTE_LIBRTE_CFGFILE) += librte_cfgfile
DIRS-$(CONFIG_RTE_LIBRTE_CMDLINE) += librte_cmdline
DIRS-$(CONFIG_RTE_LIBRTE_ETHER) += librte_ether
+DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += librte_cryptodev
DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += librte_vhost
DIRS-$(CONFIG_RTE_LIBRTE_HASH) += librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_LPM) += librte_lpm
diff --git a/lib/librte_cryptodev/Makefile b/lib/librte_cryptodev/Makefile
new file mode 100644
index 0000000..6ed9b76
--- /dev/null
+++ b/lib/librte_cryptodev/Makefile
@@ -0,0 +1,60 @@
+# BSD LICENSE
+#
+# Copyright(c) 2015 Intel Corporation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = libcryptodev.a
+
+# library version
+LIBABIVER := 1
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+# library source files
+SRCS-y += rte_cryptodev.c
+
+# export include files
+SYMLINK-y-include += rte_crypto.h
+SYMLINK-y-include += rte_cryptodev.h
+SYMLINK-y-include += rte_cryptodev_pmd.h
+
+# versioning export map
+EXPORT_MAP := rte_cryptodev_version.map
+
+# library dependencies
+DEPDIRS-y += lib/librte_eal
+DEPDIRS-y += lib/librte_mempool
+DEPDIRS-y += lib/librte_ring
+DEPDIRS-y += lib/librte_mbuf
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_cryptodev/rte_crypto.h
b/lib/librte_cryptodev/rte_crypto.h
new file mode 100644
index 0000000..3fe4db7
--- /dev/null
+++ b/lib/librte_cryptodev/rte_crypto.h
@@ -0,0 +1,720 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_CRYPTO_H_
+#define _RTE_CRYPTO_H_
+
+/**
+ * @file rte_crypto.h
+ *
+ * RTE Cryptographic Definitions
+ *
+ * Defines symmetric cipher and authentication algorithms and modes, as well
+ * as supported symmetric crypto operation combinations.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_mbuf.h>
+#include <rte_memory.h>
+#include <rte_mempool.h>
+
+/**
+ * This enumeration lists different types of crypto operations supported by rte
+ * crypto devices. The operation type is defined during session registration
and
+ * cannot be changed for a session once it has been setup, or if using a
+ * session-less crypto operation it is defined within the crypto operation
+ * op_params.
+ */
+enum rte_crypto_operation_chain {
+ RTE_CRYPTO_SYM_OP_CIPHER_ONLY,
+ /**< Cipher only operation on the data */
+ RTE_CRYPTO_SYM_OP_HASH_ONLY,
+ /**< Hash only operation on the data */
+ RTE_CRYPTO_SYM_OPCHAIN_HASH_CIPHER,
+ /**<
+ * Chain a hash followed by any cipher operation.
+ *
+ * If it is required that the result of the hash (i.e. the digest)
+ * is going to be included in the data to be ciphered, then:
+ *
+ * - The digest MUST be placed in the destination buffer at the
+ * location corresponding to the end of the data region to be hashed
+ * (hash_start_offset + message length to hash), i.e. there must be
+ * no gaps between the start of the digest and the end of the data
+ * region to be hashed.
+ *
+ * - The message length to cipher member of the rte_crypto_op_data
+ * structure must be equal to the overall length of the plain text,
+ * the digest length and any (optional) trailing data that is to be
+ * included.
+ *
+ * - The message length to cipher must be a multiple to the block
+ * size if a block cipher is being used - the implementation does not
+ * pad.
+ */
+ RTE_CRYPTO_SYM_OPCHAIN_CIPHER_HASH,
+ /**<
+ * Chain any cipher followed by any hash operation.The hash operation
+ * will be performed on the ciphertext resulting from the cipher
+ * operation.
+ */
+};
+
+/** Symmetric Cipher Algorithms */
+enum rte_crypto_cipher_algorithm {
+ RTE_CRYPTO_SYM_CIPHER_NULL = 1,
+ /**< NULL cipher algorithm. No mode applies to the NULL algorithm. */
+
+ RTE_CRYPTO_SYM_CIPHER_3DES_CBC,
+ /**< Triple DES algorithm in CBC mode */
+ RTE_CRYPTO_SYM_CIPHER_3DES_CTR,
+ /**< Triple DES algorithm in CTR mode */
+ RTE_CRYPTO_SYM_CIPHER_3DES_ECB,
+ /**< Triple DES algorithm in ECB mode */
+
+ RTE_CRYPTO_SYM_CIPHER_AES_CBC,
+ /**< AES algorithm in CBC mode */
+ RTE_CRYPTO_SYM_CIPHER_AES_CCM,
+ /**< AES algorithm in CCM mode. When this cipher algorithm is used the
+ * *RTE_CRYPTO_SYM_HASH_AES_CCM* element of the
+ * *rte_crypto_hash_algorithm* enum MUST be used to set up the related
+ * *rte_crypto_hash_setup_data* structure in the session context or in
+ * the op_params of the crypto operation structure in the case of a
+ * session-less crypto operation
+ */
+ RTE_CRYPTO_SYM_CIPHER_AES_CTR,
+ /**< AES algorithm in Counter mode */
+ RTE_CRYPTO_SYM_CIPHER_AES_ECB,
+ /**< AES algorithm in ECB mode */
+ RTE_CRYPTO_SYM_CIPHER_AES_F8,
+ /**< AES algorithm in F8 mode */
+ RTE_CRYPTO_SYM_CIPHER_AES_GCM,
+ /**< AES algorithm in GCM mode. When this cipher algorithm is used the
+ * *RTE_CRYPTO_SYM_HASH_AES_GCM* element of the
+ * *rte_crypto_hash_algorithm* enum MUST be used to set up the related
+ * *rte_crypto_hash_setup_data* structure in the session context or in
+ * the op_params of the crypto operation structure in the case of a
+ * session-less crypto operation.
+ */
+ RTE_CRYPTO_SYM_CIPHER_AES_XTS,
+ /**< AES algorithm in XTS mode */
+
+ RTE_CRYPTO_SYM_CIPHER_ARC4,
+ /**< (A)RC4 cipher algorithm */
+
+ RTE_CRYPTO_SYM_CIPHER_KASUMI_F8,
+ /**< Kasumi algorithm in F8 mode */
+
+ RTE_CRYPTO_SYM_CIPHER_SNOW3G_UEA2,
+ /**< SNOW3G algorithm in UEA2 mode */
+
+ RTE_CRYPTO_SYM_CIPHER_ZUC_EEA3
+ /**< ZUC algorithm in EEA3 mode */
+};
+
+/** Symmetric Cipher Direction */
+enum rte_crypto_cipher_operation {
+ RTE_CRYPTO_SYM_CIPHER_OP_ENCRYPT,
+ /**< Encrypt cipher operation */
+ RTE_CRYPTO_SYM_CIPHER_OP_DECRYPT
+ /**< Decrypt cipher operation */
+};
+
+/** Crypto key structure */
+struct rte_crypto_key {
+ uint8_t *data; /**< pointer to key data */
+ phys_addr_t phys_addr;
+ size_t length; /**< key length in bytes */
+};
+
+/**
+ * Symmetric Cipher Setup Data.
+ *
+ * This structure contains data relating to Cipher (Encryption and Decryption)
+ * use to create a session.
+ */
+struct rte_crypto_cipher_xform {
+ enum rte_crypto_cipher_operation op;
+ /**< This parameter determines if the cipher operation is an encrypt or
+ * a decrypt operation. For the RC4 algorithm and the F8/CTR modes,
+ * only encrypt operations are valid. */
+ enum rte_crypto_cipher_algorithm algo;
+ /**< Cipher algorithm */
+
+ struct rte_crypto_key key;
+ /**< Cipher key
+ *
+ * For the RTE_CRYPTO_SYM_CIPHER_AES_F8 mode of operation, key.data will
+ * point to a concatenation of the AES encryption key followed by a
+ * keymask. As per RFC3711, the keymask should be padded with trailing
+ * bytes to match the length of the encryption key used.
+ *
+ * For AES-XTS mode of operation, two keys must be provided and
+ * key.data must point to the two keys concatenated together (Key1 ||
+ * Key2). The cipher key length will contain the total size of both
keys.
+ *
+ * Cipher key length is in bytes. For AES it can be 128 bits (16 bytes),
+ * 192 bits (24 bytes) or 256 bits (32 bytes).
+ *
+ * For the CCM mode of operation, the only supported key length is 128
+ * bits (16 bytes).
+ *
+ * For the RTE_CRYPTO_SYM_CIPHER_AES_F8 mode of operation, key.length
+ * should be set to the combined length of the encryption key and the
+ * keymask. Since the keymask and the encryption key are the same size,
+ * key.length should be set to 2 x the AES encryption key length.
+ *
+ * For the AES-XTS mode of operation:
+ * - Two keys must be provided and key.length refers to total length of
+ * the two keys.
+ * - Each key can be either 128 bits (16 bytes) or 256 bits (32 bytes).
+ * - Both keys must have the same size.
+ **/
+};
+
+/** Symmetric Authentication / Hash Algorithms */
+enum rte_crypto_auth_algorithm {
+ RTE_CRYPTO_SYM_HASH_NONE = 0,
+ /**< No hash algorithm. */
+
+ RTE_CRYPTO_SYM_HASH_AES_CBC_MAC,
+ /**< AES-CBC-MAC algorithm. Only 128-bit keys are supported. */
+ RTE_CRYPTO_SYM_HASH_AES_CCM,
+ /**< AES algorithm in CCM mode. This is an authenticated cipher. When
+ * this hash algorithm is used, the *RTE_CRYPTO_SYM_CIPHER_AES_CCM*
+ * element of the *rte_crypto_cipher_algorithm* enum MUST be used to
+ * set up the related rte_crypto_cipher_setup_data structure in the
+ * session context or the corresponding parameter in the crypto
operation
+ * data structures op_params parameter MUST be set for a session-less
+ * crypto operation.
+ * */
+ RTE_CRYPTO_SYM_HASH_AES_CMAC,
+ /**< AES CMAC algorithm. */
+ RTE_CRYPTO_SYM_HASH_AES_GCM,
+ /**< AES algorithm in GCM mode. When this hash algorithm
+ * is used, the RTE_CRYPTO_SYM_CIPHER_AES_GCM element of the
+ * rte_crypto_cipher_algorithm enum MUST be used to set up the related
+ * rte_crypto_cipher_setup_data structure in the session context, or
+ * the corresponding parameter in the crypto operation data structures
+ * op_params parameter MUST be set for a session-less crypto operation.
+ */
+ RTE_CRYPTO_SYM_HASH_AES_GMAC,
+ /**< AES GMAC algorithm. When this hash algorithm
+ * is used, the RTE_CRYPTO_SYM_CIPHER_AES_GCM element of the
+ * rte_crypto_cipher_algorithm enum MUST be used to set up the related
+ * rte_crypto_cipher_setup_data structure in the session context, or
+ * the corresponding parameter in the crypto operation data structures
+ * op_params parameter MUST be set for a session-less crypto operation.
+ */
+ RTE_CRYPTO_SYM_HASH_AES_XCBC_MAC,
+ /**< AES XCBC algorithm. */
+
+ RTE_CRYPTO_SYM_HASH_KASUMI_F9,
+ /**< Kasumi algorithm in F9 mode. */
+
+ RTE_CRYPTO_SYM_HASH_MD5,
+ /**< MD5 algorithm */
+ RTE_CRYPTO_SYM_HASH_MD5_HMAC,
+ /**< HMAC using MD5 algorithm */
+
+ RTE_CRYPTO_SYM_HASH_SHA1,
+ /**< 128 bit SHA algorithm. */
+ RTE_CRYPTO_SYM_HASH_SHA1_HMAC,
+ /**< HMAC using 128 bit SHA algorithm. */
+ RTE_CRYPTO_SYM_HASH_SHA224,
+ /**< 224 bit SHA algorithm. */
+ RTE_CRYPTO_SYM_HASH_SHA224_HMAC,
+ /**< HMAC using 224 bit SHA algorithm. */
+ RTE_CRYPTO_SYM_HASH_SHA256,
+ /**< 256 bit SHA algorithm. */
+ RTE_CRYPTO_SYM_HASH_SHA256_HMAC,
+ /**< HMAC using 256 bit SHA algorithm. */
+ RTE_CRYPTO_SYM_HASH_SHA384,
+ /**< 384 bit SHA algorithm. */
+ RTE_CRYPTO_SYM_HASH_SHA384_HMAC,
+ /**< HMAC using 384 bit SHA algorithm. */
+ RTE_CRYPTO_SYM_HASH_SHA512,
+ /**< 512 bit SHA algorithm. */
+ RTE_CRYPTO_SYM_HASH_SHA512_HMAC,
+ /**< HMAC using 512 bit SHA algorithm. */
+
+ RTE_CRYPTO_SYM_HASH_SNOW3G_UIA2,
+ /**< SNOW3G algorithm in UIA2 mode. */
+
+ RTE_CRYPTO_SYM_HASH_ZUC_EIA3,
+ /**< ZUC algorithm in EIA3 mode */
+};
+
+/** Symmetric Authentication / Hash Operations */
+enum rte_crypto_auth_operation {
+ RTE_CRYPTO_SYM_HASH_OP_DIGEST_VERIFY, /**< Verify digest */
+ RTE_CRYPTO_SYM_HASH_OP_DIGEST_GENERATE /**< Generate digest */
+};
+
+/**
+ * Authentication / Hash transform data.
+ *
+ * This structure contains data relating to an authentication/hash crypto
+ * transforms. The fields op, algo and digest_length are common to all
+ * authentication transforms and MUST be set.
+ */
+struct rte_crypto_auth_xform {
+ enum rte_crypto_auth_operation op; /**< Authentication operation
type */
+ enum rte_crypto_auth_algorithm algo; /**< Authentication algorithm
selection */
+
+ struct rte_crypto_key key; /**< Authentication key data.
+ * The authentication key length MUST be less than or equal to the
+ * block size of the algorithm. It is the callers responsibility to
+ * ensure that the key length is compliant with the standard being used
+ * (for example RFC 2104, FIPS 198a).
+ */
+
+ uint32_t digest_length;
+ /**< Length of the digest to be returned. If the verify option is set,
+ * this specifies the length of the digest to be compared for the
+ * session.
+ *
+ * If the value is less than the maximum length allowed by the hash,
+ * the result shall be truncated. If the value is greater than the
+ * maximum length allowed by the hash then an error will be generated
+ * by *rte_cryptodev_session_create* or by the
+ * *rte_cryptodev_enqueue_burst* if using session-less APIs.
+ */
+
+ uint32_t add_auth_data_length;
+ /**< The length of the additional authenticated data (AAD) in bytes.
+ * The maximum permitted value is 240 bytes, unless otherwise specified
+ * below.
+ *
+ * This field must be specified when the hash algorithm is one of the
+ * following:
+ *
+ * - For SNOW3G (@ref RTE_CRYPTO_SYM_HASH_SNOW3G_UIA2), this is the
+ * length of the IV (which should be 16).
+ *
+ * - For GCM (@ref RTE_CRYPTO_SYM_HASH_AES_GCM). In this case, this is
+ * the length of the Additional Authenticated Data (called A, in NIST
+ * SP800-38D).
+ *
+ * - For CCM (@ref RTE_CRYPTO_SYM_HASH_AES_CCM). In this case, this is
+ * the length of the associated data (called A, in NIST SP800-38C).
+ * Note that this does NOT include the length of any padding, or the
+ * 18 bytes reserved at the start of the above field to store the
+ * block B0 and the encoded length. The maximum permitted value in
+ * this case is 222 bytes.
+ *
+ * @note
+ * For AES-GMAC (@ref RTE_CRYPTO_SYM_HASH_AES_GMAC) mode of operation
+ * this field is not used and should be set to 0. Instead the length
+ * of the AAD data is specified in the message length to hash field of
+ * the rte_crypto_op_data structure.
+ */
+};
+
+enum rte_crypto_xform_type {
+ RTE_CRYPTO_XFORM_NOT_SPECIFIED = 0,
+ RTE_CRYPTO_XFORM_AUTH,
+ RTE_CRYPTO_XFORM_CIPHER
+};
+
+/**
+ * Crypto transform structure.
+ *
+ * This is used to specify the crypto transforms required, multiple transforms
+ * can be chained together to specify a chain transforms such as authentication
+ * then cipher, or cipher then authentication. Each transform structure can
+ * hold a single transform, the type field is used to specify which transform
+ * is contained within the union */
+struct rte_crypto_xform {
+ struct rte_crypto_xform *next; /**< next xform in chain */
+
+ enum rte_crypto_xform_type type; /**< xform type */
+ union {
+ struct rte_crypto_auth_xform auth; /**< Authentication /
hash xform */
+ struct rte_crypto_cipher_xform cipher; /**< Cipher xform */
+ };
+};
+
+/**
+ * Crypto operation session type. This is used to specify whether a crypto
+ * operation has session structure attached for immutable parameters or if all
+ * operation information is included in the operation data structure.
+ */
+enum rte_crypto_op_sess_type {
+ RTE_CRYPTO_OP_WITH_SESSION, /**< Session based crypto operation */
+ RTE_CRYPTO_OP_SESSIONLESS /**< Session-less crypto operation */
+};
+
+
+/**
+ * Cryptographic Operation Data.
+ *
+ * This structure contains data relating to performing cryptographic processing
+ * on a data buffer. This request is used with rte_crypto_enqueue_burst() call
+ * for performing cipher, hash, or a combined hash and cipher operations.
+ */
+struct rte_crypto_op_data {
+ enum rte_crypto_op_sess_type type;
+
+ struct rte_mbuf *dst;
+
+ union {
+ struct rte_cryptodev_session *session;
+ /**< Handle for the initialised session context */
+ struct rte_crypto_xform *xform;
+ /**< Session-less API crypto operation parameters */
+ };
+
+ struct {
+ struct {
+ uint32_t offset;
+ /**< Starting point for cipher processing, specified
+ * as number of bytes from start of data in the source
+ * buffer. The result of the cipher operation will be
+ * written back into the output buffer starting at
+ * this location. */
+
+ uint32_t length;
+ /**< The message length, in bytes, of the source buffer
+ * on which the cryptographic operation will be
+ * computed. This must be a multiple of the block size
+ * if a block cipher is being used. This is also the
+ * same as the result length.
+ *
+ * @note
+ * In the case of CCM @ref RTE_CRYPTO_SYM_HASH_AES_CCM,
+ * this value should not include the length of the
+ * padding or the length of the MAC; the driver will
+ * compute the actual number of bytes over which the
+ * encryption will occur, which will include these
+ * values.
+ *
+ * @note
+ * For AES-GMAC @ref RTE_CRYPTO_SYM_HASH_AES_GMAC, this
+ * field should be set to 0.
+ */
+ } to_cipher; /**< Data offsets and length for ciphering */
+
+ struct {
+ uint32_t offset;
+ /**< Starting point for hash processing, specified as
+ * number of bytes from start of packet in source
+ * buffer.
+ *
+ * @note
+ * For CCM and GCM modes of operation, this field is
+ * ignored. The field @ref additional_auth field
+ * should be set instead.
+ *
+ * @note For AES-GMAC (@ref
RTE_CRYPTO_SYM_HASH_AES_GMAC) mode of
+ * operation, this field specifies the start of the
AAD data in
+ * the source buffer.
+ */
+
+ uint32_t length;
+ /**< The message length, in bytes, of the source
buffer that
+ * the hash will be computed on.
+ *
+ * @note
+ * For CCM and GCM modes of operation, this field is
+ * ignored. The field @ref additional_auth field should
+ * be set instead.
+ *
+ * @note
+ * For AES-GMAC @ref RTE_CRYPTO_SYM_HASH_AES_GMAC mode
+ * of operation, this field specifies the length of
+ * the AAD data in the source buffer.
+ */
+ } to_hash; /**< Data offsets and length for authentication */
+ } data; /**< Details of data to be operated on */
+
+ struct {
+ uint8_t *data;
+ /**< Initialisation Vector or Counter.
+ *
+ * - For block ciphers in CBC or F8 mode, or for Kasumi in F8
+ * mode, or for SNOW3G in UEA2 mode, this is the Initialisation
+ * Vector (IV) value.
+ *
+ * - For block ciphers in CTR mode, this is the counter.
+ *
+ * - For GCM mode, this is either the IV (if the length is 96
+ * bits) or J0 (for other sizes), where J0 is as defined by
+ * NIST SP800-38D. Regardless of the IV length, a full 16 bytes
+ * needs to be allocated.
+ *
+ * - For CCM mode, the first byte is reserved, and the nonce
+ * should be written starting at &iv[1] (to allow space for the
+ * implementation to write in the flags in the first byte).
+ * Note that a full 16 bytes should be allocated, even though
+ * the length field will have a value less than this.
+ *
+ * - For AES-XTS, this is the 128bit tweak, i, from IEEE Std
+ * 1619-2007.
+ *
+ * For optimum performance, the data pointed to SHOULD be
+ * 8-byte aligned.
+ */
+ phys_addr_t phys_addr;
+ size_t length;
+ /**< Length of valid IV data.
+ *
+ * - For block ciphers in CBC or F8 mode, or for Kasumi in F8
+ * mode, or for SNOW3G in UEA2 mode, this is the length of the
+ * IV (which must be the same as the block length of the
+ * cipher).
+ *
+ * - For block ciphers in CTR mode, this is the length of the
+ * counter (which must be the same as the block length of the
+ * cipher).
+ *
+ * - For GCM mode, this is either 12 (for 96-bit IVs) or 16, in
+ * which case data points to J0.
+ *
+ * - For CCM mode, this is the length of the nonce, which can
+ * be in the range 7 to 13 inclusive.
+ */
+ } iv; /**< Initialisation vector parameters */
+
+ struct {
+ uint8_t *data;
+ /**< If this member of this structure is set this is a
+ * pointer to the location where the digest result should be
+ * inserted (in the case of digest generation) or where the
+ * purported digest exists (in the case of digest
+ * verification).
+ *
+ * At session creation time, the client specified the digest
+ * result length with the digest_length member of the @ref
+ * rte_crypto_hash_setup_data structure. For physical crypto
+ * devices the caller must allocate at least digest_length of
+ * physically contiguous memory at this location.
+ *
+ * For digest generation, the digest result will overwrite
+ * any data at this location.
+ *
+ * @note
+ * For GCM (@ref RTE_CRYPTO_SYM_HASH_AES_GCM), for
+ * "digest result" read "authentication tag T".
+ *
+ * If this member is not set the digest result is understood
+ * to be in the destination buffer for digest generation, and
+ * in the source buffer for digest verification. The location
+ * of the digest result in this case is immediately following
+ * the region over which the digest is computed.
+ */
+ phys_addr_t phys_addr; /**< Physical address of digest */
+ uint32_t length; /**< Length of digest */
+ } digest; /**< Digest parameters */
+
+ struct {
+ uint8_t *data;
+ /**< Pointer to Additional Authenticated Data (AAD) needed for
+ * authenticated cipher mechanisms (CCM and GCM), and to the IV
+ * for SNOW3G authentication
+ * (@ref RTE_CRYPTO_SYM_HASH_SNOW3G_UIA2). For other
+ * authentication mechanisms this pointer is ignored.
+ *
+ * The length of the data pointed to by this field is set up for
+ * the session in the @ref rte_crypto_hash_params structure
+ * as part of the @ref rte_cryptodev_session_create function
+ * call. This length must not exceed 240 bytes.
+ *
+ * Specifically for CCM (@ref RTE_CRYPTO_SYM_HASH_AES_CCM), the
+ * caller should setup this field as follows:
+ *
+ * - the nonce should be written starting at an offset of one
+ * byte into the array, leaving room for the implementation
+ * to write in the flags to the first byte.
+ *
+ * - the additional authentication data itself should be
+ * written starting at an offset of 18 bytes into the array,
+ * leaving room for the length encoding in the first two
+ * bytes of the second block.
+ *
+ * - the array should be big enough to hold the above fields,
+ * plus any padding to round this up to the nearest multiple
+ * of the block size (16 bytes). Padding will be added by the
+ * implementation.
+ *
+ * Finally, for GCM (@ref RTE_CRYPTO_SYM_HASH_AES_GCM), the
+ * caller should setup this field as follows:
+ *
+ * - the AAD is written in starting at byte 0
+ * - the array must be big enough to hold the AAD, plus any
+ * padding to round this up to the nearest multiple of the
+ * block size (16 bytes). Padding will be added by the
+ * implementation.
+ *
+ * @note
+ * For AES-GMAC (@ref RTE_CRYPTO_SYM_HASH_AES_GMAC) mode of
+ * operation, this field is not used and should be set to 0.
+ * Instead the AAD data should be placed in the source buffer.
+ */
+ phys_addr_t phys_addr; /**< physical address */
+ } additional_auth; /**< Additional authentication parameters */
+
+ struct rte_mempool *pool; /**< mempool used to allocate crypto op
*/
+};
+
+
+
+struct crypto_op_pool_private {
+ unsigned max_nb_xforms;
+};
+
+
+extern struct rte_mempool *
+rte_crypto_op_pool_create(const char *name, unsigned nb_ops,
+ unsigned cache_size, unsigned nb_xforms, int socket_id);
+
+
+/**
+ * Reset the fields of a packet mbuf to their default values.
+ *
+ * The given mbuf must have only one segment.
+ *
+ * @param m
+ * The packet mbuf to be resetted.
+ */
+static inline void
+__rte_crypto_op_reset(struct rte_crypto_op_data *op)
+{
+ op->type = RTE_CRYPTO_OP_SESSIONLESS;
+}
+
+static inline struct rte_crypto_op_data *
+__rte_crypto_op_raw_alloc(struct rte_mempool *mp)
+{
+ void *buf = NULL;
+
+ if (rte_mempool_get(mp, &buf) < 0)
+ return NULL;
+
+ return (struct rte_crypto_op_data *)buf;
+}
+
+/**
+ * Create an crypto operation structure which is used to define the crypto
+ * operation processing which is to be done on a packet.
+ *
+ * @param dev_id Device identifier
+ * @param m_src Source mbuf of data for processing.
+ * @param m_dst Destination mbuf for processed data. Can be NULL
+ * if crypto operation is done in place.
+ */
+static inline struct rte_crypto_op_data *
+rte_crypto_op_alloc(struct rte_mempool *mp)
+{
+ struct rte_crypto_op_data *op = __rte_crypto_op_raw_alloc(mp);
+
+ if (op != NULL)
+ __rte_crypto_op_reset(op);
+ return op;
+}
+
+static inline int
+rte_crypto_op_bulk_alloc(struct rte_mempool *mp,
+ struct rte_crypto_op_data **ops,
+ unsigned nb_ops) {
+ void *objs[nb_ops];
+ unsigned i;
+
+ if (rte_mempool_get_bulk(mp, objs, nb_ops) < 0)
+ return -1;
+
+ for (i = 0; i < nb_ops; i++) {
+ ops[i] = objs[i];
+ __rte_crypto_op_reset(ops[i]);
+ }
+
+ return nb_ops;
+
+}
+
+static inline struct rte_crypto_op_data *
+rte_crypto_op_alloc_sessionless(struct rte_mempool *mp, unsigned nb_xforms)
+{
+ struct rte_crypto_op_data *op = NULL;
+ struct rte_crypto_xform *xform = NULL;
+ struct crypto_op_pool_private *priv_data =
+ (struct crypto_op_pool_private *)
+ rte_mempool_get_priv(mp);
+
+ if (nb_xforms > priv_data->max_nb_xforms && nb_xforms > 0)
+ return op;
+
+ op = __rte_crypto_op_raw_alloc(mp);
+ if (op != NULL) {
+ __rte_crypto_op_reset(op);
+
+ xform = op->xform = (struct rte_crypto_xform *)(op + 1);
+
+ do {
+ xform->type = RTE_CRYPTO_XFORM_NOT_SPECIFIED;
+ xform = xform->next = --nb_xforms > 0 ? xform + 1 :
NULL;
+ } while (xform);
+ }
+ return op;
+}
+
+
+/**
+ * Free operation structure free function
+ *
+ * @param op Crypto operation data structure to be freed
+ */
+static inline void
+rte_crypto_op_free(struct rte_crypto_op_data *op)
+{
+ if (op != NULL)
+ rte_mempool_put(op->pool, op);
+}
+
+
+static inline void
+rte_crypto_op_attach_session(struct rte_crypto_op_data *op,
+ struct rte_cryptodev_session *sess)
+{
+ op->session = sess;
+ op->type = RTE_CRYPTO_OP_WITH_SESSION;
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_CRYPTO_H_ */
diff --git a/lib/librte_cryptodev/rte_crypto_version.map
b/lib/librte_cryptodev/rte_crypto_version.map
new file mode 100644
index 0000000..c93fcad
--- /dev/null
+++ b/lib/librte_cryptodev/rte_crypto_version.map
@@ -0,0 +1,40 @@
+DPDK_2.2 {
+ global:
+
+ rte_cryptodev_create_vdev;
+ rte_cryptodev_get_dev_id;
+ rte_cryptodev_count;
+ rte_cryptodev_configure;
+ rte_cryptodev_start;
+ rte_cryptodev_stop;
+ rte_cryptodev_close;
+ rte_cryptodev_queue_pair_setup;
+ rte_cryptodev_queue_pair_start;
+ rte_cryptodev_queue_pair_stop;
+ rte_cryptodev_queue_pair_count;
+ rte_cryptodev_stats_get;
+ rte_cryptodev_stats_reset;
+ rte_cryptodev_info_get;
+ rte_cryptodev_callback_register;
+ rte_cryptodev_callback_unregister;
+ rte_cryptodev_enqueue_burst;
+ rte_cryptodev_dequeue_burst;
+ rte_cryptodev_create_crypto_op;
+ rte_cryptodev_crypto_op_free;
+ rte_cryptodev_session_create;
+ rte_cryptodev_session_free;
+
+ rte_cryptodev_pmd_get_dev;
+ rte_cryptodev_pmd_get_named_dev;
+ rte_cryptodev_pmd_is_valid_dev;
+ rte_cryptodev_pmd_allocate;
+ rte_cryptodev_pmd_virtual_dev_init;
+ rte_cryptodev_pmd_release_device;
+ rte_cryptodev_pmd_attach;
+ rte_cryptodev_pmd_detach;
+ rte_cryptodev_pmd_driver_register;
+ rte_cryptodev_pmd_socket_id;
+ rte_cryptodev_pmd_callback_process;
+
+ local: *;
+};
diff --git a/lib/librte_cryptodev/rte_cryptodev.c
b/lib/librte_cryptodev/rte_cryptodev.c
new file mode 100644
index 0000000..d45feb0
--- /dev/null
+++ b/lib/librte_cryptodev/rte_cryptodev.c
@@ -0,0 +1,1126 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+#include <sys/queue.h>
+#include <ctype.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <netinet/in.h>
+
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_dev.h>
+#include <rte_interrupts.h>
+#include <rte_pci.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_memzone.h>
+#include <rte_launch.h>
+#include <rte_tailq.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_common.h>
+#include <rte_ring.h>
+#include <rte_mempool.h>
+#include <rte_malloc.h>
+#include <rte_mbuf.h>
+#include <rte_errno.h>
+#include <rte_spinlock.h>
+#include <rte_string_fns.h>
+
+#include "rte_crypto.h"
+#include "rte_cryptodev.h"
+#include "rte_cryptodev_pmd.h"
+
+struct rte_cryptodev rte_crypto_devices[RTE_CRYPTO_MAX_DEVS];
+
+struct rte_cryptodev *rte_cryptodevs = &rte_crypto_devices[0];
+
+static struct rte_cryptodev_global cryptodev_globals = {
+ .devs = &rte_crypto_devices[0],
+ .data = NULL,
+ .nb_devs = 0,
+ .max_devs = RTE_CRYPTO_MAX_DEVS
+};
+
+struct rte_cryptodev_global *rte_cryptodev_globals = &cryptodev_globals;
+
+/* spinlock for crypto device callbacks */
+static rte_spinlock_t rte_cryptodev_cb_lock = RTE_SPINLOCK_INITIALIZER;
+
+
+/**
+ * The user application callback description.
+ *
+ * It contains callback address to be registered by user application,
+ * the pointer to the parameters for callback, and the event type.
+ */
+struct rte_cryptodev_callback {
+ TAILQ_ENTRY(rte_cryptodev_callback) next; /**< Callbacks list */
+ rte_cryptodev_cb_fn cb_fn; /**< Callback address */
+ void *cb_arg; /**< Parameter for callback */
+ enum rte_cryptodev_event_type event; /**< Interrupt event type
*/
+ uint32_t active; /**< Callback is executing */
+};
+
+int
+rte_cryptodev_create_vdev(const char *name, const char *args)
+{
+ return rte_eal_vdev_init(name, args);
+}
+
+int
+rte_cryptodev_get_dev_id(const char *name) {
+ unsigned i;
+
+ if (name == NULL)
+ return -1;
+
+ for (i = 0; i < rte_cryptodev_globals->max_devs; i++)
+ if (strcmp(rte_cryptodev_globals->devs[i].data->name, name) ==
0 &&
+ rte_cryptodev_globals->devs[i].attached ==
+ RTE_CRYPTODEV_ATTACHED)
+ return i;
+
+ return -1;
+}
+
+uint8_t
+rte_cryptodev_count(void)
+{
+ return rte_cryptodev_globals->nb_devs;
+}
+
+uint8_t
+rte_cryptodev_count_devtype(enum rte_cryptodev_type type)
+{
+ uint8_t i, dev_count = 0;
+
+ for (i = 0; i < rte_cryptodev_globals->max_devs; i++)
+ if (rte_cryptodev_globals->devs[i].dev_type == type &&
+ rte_cryptodev_globals->devs[i].attached ==
+ RTE_CRYPTODEV_ATTACHED)
+ dev_count++;
+
+ return dev_count;
+}
+
+int
+rte_cryptodev_socket_id(uint8_t dev_id)
+{
+ struct rte_cryptodev *dev;
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id))
+ return -1;
+
+ dev = rte_cryptodev_pmd_get_dev(dev_id);
+
+ if (dev->pci_dev)
+ return dev->pci_dev->numa_node;
+ else
+ return 0;
+}
+
+static inline void
+rte_cryptodev_data_alloc(int socket_id)
+{
+ const unsigned flags = 0;
+ const struct rte_memzone *mz;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ mz = rte_memzone_reserve("rte_cryptodev_data",
+ cryptodev_globals.max_devs * sizeof(struct
rte_cryptodev_data),
+ socket_id, flags);
+ } else
+ mz = rte_memzone_lookup("rte_cryptodev_data");
+ if (mz == NULL)
+ rte_panic("Cannot allocate memzone for the crypto device data");
+
+ cryptodev_globals.data = mz->addr;
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ memset(cryptodev_globals.data, 0,
+ cryptodev_globals.max_devs * sizeof(struct
rte_cryptodev_data));
+}
+
+static uint8_t
+rte_cryptodev_find_free_device_index(void)
+{
+ uint8_t dev_id;
+
+ for (dev_id = 0; dev_id < RTE_CRYPTO_MAX_DEVS; dev_id++) {
+ if (rte_crypto_devices[dev_id].attached ==
RTE_CRYPTODEV_DETACHED)
+ return dev_id;
+ }
+ return RTE_CRYPTO_MAX_DEVS;
+}
+
+struct rte_cryptodev *
+rte_cryptodev_pmd_allocate(const char *name, enum pmd_type type, int socket_id)
+{
+ uint8_t dev_id;
+ struct rte_cryptodev *cryptodev;
+
+ dev_id = rte_cryptodev_find_free_device_index();
+ if (dev_id == RTE_CRYPTO_MAX_DEVS) {
+ CDEV_LOG_ERR("Reached maximum number of crypto devices");
+ return NULL;
+ }
+
+ if (cryptodev_globals.data == NULL)
+ rte_cryptodev_data_alloc(socket_id);
+
+ if (rte_cryptodev_pmd_get_named_dev(name) != NULL) {
+ CDEV_LOG_ERR("Crypto device with name %s already "
+ "allocated!", name);
+ return NULL;
+ }
+
+ cryptodev = rte_cryptodev_pmd_get_dev(dev_id);
+ cryptodev->data = &cryptodev_globals.data[dev_id];
+ snprintf(cryptodev->data->name, RTE_CRYPTODEV_NAME_MAX_LEN, "%s", name);
+ cryptodev->data->dev_id = dev_id;
+ cryptodev->attached = RTE_CRYPTODEV_ATTACHED;
+ cryptodev->pmd_type = type;
+ cryptodev_globals.nb_devs++;
+
+ return cryptodev;
+}
+
+static inline int
+rte_cryptodev_create_unique_device_name(char *name, size_t size,
+ struct rte_pci_device *pci_dev)
+{
+ int ret;
+
+ if ((name == NULL) || (pci_dev == NULL))
+ return -EINVAL;
+
+ ret = snprintf(name, size, "%d:%d.%d",
+ pci_dev->addr.bus, pci_dev->addr.devid,
+ pci_dev->addr.function);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+int
+rte_cryptodev_pmd_release_device(struct rte_cryptodev *cryptodev)
+{
+ if (cryptodev == NULL)
+ return -EINVAL;
+
+ cryptodev->attached = RTE_CRYPTODEV_DETACHED;
+ cryptodev_globals.nb_devs--;
+ return 0;
+}
+
+struct rte_cryptodev *
+rte_cryptodev_pmd_virtual_dev_init(const char *name, size_t dev_private_size,
+ int socket_id)
+{
+ struct rte_cryptodev *cryptodev;
+
+ /* allocate device structure */
+ cryptodev = rte_cryptodev_pmd_allocate(name, PMD_VDEV, socket_id);
+ if (cryptodev == NULL)
+ return NULL;
+
+ /* allocate private device structure */
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ cryptodev->data->dev_private =
+ rte_zmalloc("%s private structure",
+ dev_private_size,
+ RTE_CACHE_LINE_SIZE);
+
+ if (cryptodev->data->dev_private == NULL)
+ rte_panic("Cannot allocate memzone for private device"
+ " data");
+ }
+
+ /* initialise user call-back tail queue */
+ TAILQ_INIT(&(cryptodev->link_intr_cbs));
+
+ return cryptodev;
+}
+
+static int
+rte_cryptodev_init(struct rte_pci_driver *pci_drv,
+ struct rte_pci_device *pci_dev)
+{
+ struct rte_cryptodev_driver *cryptodrv;
+ struct rte_cryptodev *cryptodev;
+
+ char cryptodev_name[RTE_CRYPTODEV_NAME_MAX_LEN];
+
+ int retval;
+
+ cryptodrv = (struct rte_cryptodev_driver *)pci_drv;
+ if (cryptodrv == NULL)
+ return -ENODEV;
+
+ /* Create unique Crypto device name using PCI address */
+ rte_cryptodev_create_unique_device_name(cryptodev_name,
+ sizeof(cryptodev_name), pci_dev);
+
+ cryptodev = rte_cryptodev_pmd_allocate(cryptodev_name, PMD_PDEV,
rte_socket_id());
+ if (cryptodev == NULL)
+ return -ENOMEM;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ cryptodev->data->dev_private =
+ rte_zmalloc_socket("cryptodev private
structure",
+ cryptodrv->dev_private_size,
+ RTE_CACHE_LINE_SIZE,
rte_socket_id());
+
+ if (cryptodev->data->dev_private == NULL)
+ rte_panic("Cannot allocate memzone for private device
data");
+ }
+
+ cryptodev->pci_dev = pci_dev;
+ cryptodev->driver = cryptodrv;
+
+ /* init user callbacks */
+ TAILQ_INIT(&(cryptodev->link_intr_cbs));
+
+ /* Invoke PMD device initialization function */
+ retval = (*cryptodrv->cryptodev_init)(cryptodrv, cryptodev);
+ if (retval == 0)
+ return 0;
+
+ CDEV_LOG_ERR("driver %s: crypto_dev_init(vendor_id=0x%u device_id=0x%x)"
+ " failed", pci_drv->name,
+ (unsigned) pci_dev->id.vendor_id,
+ (unsigned) pci_dev->id.device_id);
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ rte_free(cryptodev->data->dev_private);
+
+ cryptodev->attached = RTE_CRYPTODEV_DETACHED;
+ cryptodev_globals.nb_devs--;
+
+ return -ENXIO;
+}
+
+static int
+rte_cryptodev_uninit(struct rte_pci_device *pci_dev)
+{
+ const struct rte_cryptodev_driver *cryptodrv;
+ struct rte_cryptodev *cryptodev;
+ char cryptodev_name[RTE_CRYPTODEV_NAME_MAX_LEN];
+ int ret;
+
+ if (pci_dev == NULL)
+ return -EINVAL;
+
+ /* Create unique device name using PCI address */
+ rte_cryptodev_create_unique_device_name(cryptodev_name,
+ sizeof(cryptodev_name), pci_dev);
+
+ cryptodev = rte_cryptodev_pmd_get_named_dev(cryptodev_name);
+ if (cryptodev == NULL)
+ return -ENODEV;
+
+ cryptodrv = (const struct rte_cryptodev_driver *)pci_dev->driver;
+ if (cryptodrv == NULL)
+ return -ENODEV;
+
+ /* Invoke PMD device uninit function */
+ if (*cryptodrv->cryptodev_uninit) {
+ ret = (*cryptodrv->cryptodev_uninit)(cryptodrv, cryptodev);
+ if (ret)
+ return ret;
+ }
+
+ /* free ether device */
+ rte_cryptodev_pmd_release_device(cryptodev);
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ rte_free(cryptodev->data->dev_private);
+
+ cryptodev->pci_dev = NULL;
+ cryptodev->driver = NULL;
+ cryptodev->data = NULL;
+
+ return 0;
+}
+
+int
+rte_cryptodev_pmd_driver_register(struct rte_cryptodev_driver *cryptodrv,
+ enum pmd_type type)
+{
+ /* Call crypto device initialization directly if device is virtual */
+ if (type == PMD_VDEV)
+ return rte_cryptodev_init((struct rte_pci_driver *)cryptodrv,
+ NULL);
+
+ /* Register PCI driver for physical device intialisation during
+ * PCI probing */
+ cryptodrv->pci_drv.devinit = rte_cryptodev_init;
+ cryptodrv->pci_drv.devuninit = rte_cryptodev_uninit;
+
+ rte_eal_pci_register(&cryptodrv->pci_drv);
+
+ return 0;
+}
+
+
+int
+rte_cryptodev_pmd_attach(const char *devargs __rte_unused,
+ uint8_t *dev_id __rte_unused)
+{
+ RTE_LOG(ERR, EAL, "Hotplug support isn't enabled");
+ return -1;
+}
+
+int
+rte_cryptodev_pmd_detach(uint8_t dev_id __rte_unused,
+ char *name __rte_unused)
+{
+ RTE_LOG(ERR, EAL, "Hotplug support isn't enabled");
+ return -1;
+}
+
+
+uint16_t
+rte_cryptodev_queue_pair_count(uint8_t dev_id)
+{
+ struct rte_cryptodev *dev;
+
+ dev = &rte_crypto_devices[dev_id];
+ return dev->data->nb_queue_pairs;
+}
+
+static int
+rte_cryptodev_queue_pairs_config(struct rte_cryptodev *dev, uint16_t
nb_qpairs, int socket_id)
+{
+ struct rte_cryptodev_info dev_info;
+ uint16_t old_nb_queues = dev->data->nb_queue_pairs;
+ void **qp;
+ unsigned i;
+
+ if ((dev == NULL) || (nb_qpairs < 1)) {
+ CDEV_LOG_ERR("invalid param: dev %p, nb_queues %u",
+ dev, nb_qpairs);
+ return -EINVAL;
+ }
+
+ CDEV_LOG_DEBUG("Setup %d queues pairs on device %u",
+ nb_qpairs, dev->data->dev_id);
+
+
+ memset(&dev_info, 0, sizeof(struct rte_cryptodev_info));
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
+ (*dev->dev_ops->dev_infos_get)(dev, &dev_info);
+
+ if (nb_qpairs > (dev_info.max_queue_pairs)) {
+ CDEV_LOG_ERR("Invalid num queue_pairs (%u) for dev %u",
+ nb_qpairs, dev->data->dev_id);
+ return (-EINVAL);
+ }
+
+ if (dev->data->queue_pairs == NULL) { /* first time configuration */
+ dev->data->queue_pairs = rte_zmalloc_socket(
+ "cryptodev->queue_pairs",
+ sizeof(dev->data->queue_pairs[0]) * nb_qpairs,
+ RTE_CACHE_LINE_SIZE, socket_id);
+
+ if (dev->data->queue_pairs == NULL) {
+ dev->data->nb_queue_pairs = 0;
+ CDEV_LOG_ERR("failed to get memory for qp meta data, "
+ "nb_queues %u",
nb_qpairs);
+ return -(ENOMEM);
+ }
+ } else { /* re-configure */
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_pair_release,
-ENOTSUP);
+
+ qp = dev->data->queue_pairs;
+
+ for (i = nb_qpairs; i < old_nb_queues; i++)
+ (*dev->dev_ops->queue_pair_release)(dev, i);
+ qp = rte_realloc(qp, sizeof(qp[0]) * nb_qpairs,
+ RTE_CACHE_LINE_SIZE);
+ if (qp == NULL) {
+ CDEV_LOG_ERR("failed to realloc qp meta data,"
+ " nb_queues %u", nb_qpairs);
+ return -(ENOMEM);
+ }
+ if (nb_qpairs > old_nb_queues) {
+ uint16_t new_qs = nb_qpairs - old_nb_queues;
+
+ memset(qp + old_nb_queues, 0,
+ sizeof(qp[0]) * new_qs);
+ }
+
+ dev->data->queue_pairs = qp;
+
+ }
+ dev->data->nb_queue_pairs = nb_qpairs;
+ return 0;
+}
+
+int
+rte_cryptodev_queue_pair_start(uint8_t dev_id, uint16_t queue_pair_id)
+{
+ struct rte_cryptodev *dev;
+
+ /* This function is only safe when called from the primary process
+ * in a multi-process setup*/
+ PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%" PRIu8, dev_id);
+ return -EINVAL;
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+ if (queue_pair_id >= dev->data->nb_queue_pairs) {
+ CDEV_LOG_ERR("Invalid queue_pair_id=%d", queue_pair_id);
+ return -EINVAL;
+ }
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_pair_start, -ENOTSUP);
+
+ return dev->dev_ops->queue_pair_start(dev, queue_pair_id);
+
+}
+
+int
+rte_cryptodev_queue_pair_stop(uint8_t dev_id, uint16_t queue_pair_id)
+{
+ struct rte_cryptodev *dev;
+
+ /* This function is only safe when called from the primary process
+ * in a multi-process setup*/
+ PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%" PRIu8, dev_id);
+ return -EINVAL;
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+ if (queue_pair_id >= dev->data->nb_queue_pairs) {
+ CDEV_LOG_ERR("Invalid queue_pair_id=%d", queue_pair_id);
+ return -EINVAL;
+ }
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_pair_stop, -ENOTSUP);
+
+ return dev->dev_ops->queue_pair_stop(dev, queue_pair_id);
+
+}
+
+static int
+rte_crypto_session_pool_create(struct rte_cryptodev *dev, unsigned nb_objs,
+ unsigned obj_cache_size, int socket_id);
+
+int
+rte_cryptodev_configure(uint8_t dev_id, struct rte_cryptodev_config *config)
+{
+ struct rte_cryptodev *dev;
+ int diag;
+
+ /* This function is only safe when called from the primary process
+ * in a multi-process setup*/
+ PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%" PRIu8, dev_id);
+ return (-EINVAL);
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+
+ if (dev->data->dev_started) {
+ CDEV_LOG_ERR(
+ "device %d must be stopped to allow configuration", dev_id);
+ return (-EBUSY);
+ }
+
+ /* Setup new number of queue pairs and reconfigure device. */
+ diag = rte_cryptodev_queue_pairs_config(dev, config->nb_queue_pairs,
+ config->socket_id);
+ if (diag != 0) {
+ CDEV_LOG_ERR("dev%d rte_crypto_dev_queue_pairs_config = %d",
+ dev_id, diag);
+ return diag;
+ }
+
+ /* Setup Session mempool for device */
+ return rte_crypto_session_pool_create(dev, config->session_mp.nb_objs,
+ config->session_mp.cache_size, config->socket_id);
+}
+
+static void
+rte_cryptodev_config_restore(uint8_t dev_id __rte_unused)
+{
+}
+
+int
+rte_cryptodev_start(uint8_t dev_id)
+{
+ struct rte_cryptodev *dev;
+ int diag;
+
+ CDEV_LOG_DEBUG("Start dev_id=%" PRIu8, dev_id);
+
+ /* This function is only safe when called from the primary process
+ * in a multi-process setup*/
+ PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%" PRIu8, dev_id);
+ return (-EINVAL);
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_start, -ENOTSUP);
+
+ if (dev->data->dev_started != 0) {
+ CDEV_LOG_ERR("Device with dev_id=%" PRIu8 " already started",
+ dev_id);
+ return 0;
+ }
+
+ diag = (*dev->dev_ops->dev_start)(dev);
+ if (diag == 0)
+ dev->data->dev_started = 1;
+ else
+ return diag;
+
+ rte_cryptodev_config_restore(dev_id);
+
+ return 0;
+}
+
+void
+rte_cryptodev_stop(uint8_t dev_id)
+{
+ struct rte_cryptodev *dev;
+
+ /* This function is only safe when called from the primary process
+ * in a multi-process setup*/
+ PROC_PRIMARY_OR_RET();
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%" PRIu8, dev_id);
+ return;
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+
+ FUNC_PTR_OR_RET(*dev->dev_ops->dev_stop);
+
+ if (dev->data->dev_started == 0) {
+ CDEV_LOG_ERR("Device with dev_id=%" PRIu8 " already stopped",
+ dev_id);
+ return;
+ }
+
+ dev->data->dev_started = 0;
+ (*dev->dev_ops->dev_stop)(dev);
+}
+
+int
+rte_cryptodev_close(uint8_t dev_id)
+{
+ struct rte_cryptodev *dev;
+ int retval;
+
+ /* This function is only safe when called from the primary process
+ * in a multi-process setup*/
+ PROC_PRIMARY_OR_ERR_RET(-EINVAL);
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%" PRIu8, dev_id);
+ return -1;
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+
+ /* We can't close the device if there are outstanding session in
+ * existence */
+ if (dev->data->session_pool != NULL) {
+ if (!rte_mempool_full(dev->data->session_pool)) {
+ CDEV_LOG_ERR("dev_id=%u close failed, session mempool "
+ "has sessions still in use, free "
+ "all sessions before calling close",
+ (unsigned)dev_id);
+ return -ENOTEMPTY;
+ }
+ }
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_close, -ENOTSUP);
+ retval = (*dev->dev_ops->dev_close)(dev);
+
+ if (retval < 0)
+ return retval;
+
+ dev->data->dev_started = 0;
+ return 0;
+}
+
+int
+rte_cryptodev_queue_pair_setup(uint8_t dev_id, uint16_t queue_pair_id,
+ const struct rte_cryptodev_qp_conf *qp_conf, int socket_id)
+{
+ struct rte_cryptodev *dev;
+
+ /* This function is only safe when called from the primary process
+ * in a multi-process setup*/
+ PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%" PRIu8, dev_id);
+ return (-EINVAL);
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+ if (queue_pair_id >= dev->data->nb_queue_pairs) {
+ CDEV_LOG_ERR("Invalid queue_pair_id=%d", queue_pair_id);
+ return (-EINVAL);
+ }
+
+ if (dev->data->dev_started) {
+ CDEV_LOG_ERR(
+ "device %d must be stopped to allow configuration", dev_id);
+ return -EBUSY;
+ }
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_pair_setup, -ENOTSUP);
+
+ return (*dev->dev_ops->queue_pair_setup)(dev, queue_pair_id, qp_conf,
+ socket_id);
+}
+
+
+int
+rte_cryptodev_stats_get(uint8_t dev_id, struct rte_cryptodev_stats *stats)
+{
+ struct rte_cryptodev *dev;
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
+ return (-ENODEV);
+ }
+
+ if (stats == NULL) {
+ CDEV_LOG_ERR("Invalid stats ptr");
+ return -EINVAL;
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+ memset(stats, 0, sizeof(*stats));
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->stats_get, -ENOTSUP);
+ (*dev->dev_ops->stats_get)(dev, stats);
+ return 0;
+}
+
+void
+rte_cryptodev_stats_reset(uint8_t dev_id)
+{
+ struct rte_cryptodev *dev;
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%" PRIu8, dev_id);
+ return;
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+
+ FUNC_PTR_OR_RET(*dev->dev_ops->stats_reset);
+ (*dev->dev_ops->stats_reset)(dev);
+}
+
+
+void
+rte_cryptodev_info_get(uint8_t dev_id, struct rte_cryptodev_info *dev_info)
+{
+ struct rte_cryptodev *dev;
+
+ if (dev_id >= cryptodev_globals.nb_devs) {
+ CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
+ return;
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+
+ memset(dev_info, 0, sizeof(struct rte_cryptodev_info));
+
+ FUNC_PTR_OR_RET(*dev->dev_ops->dev_infos_get);
+ (*dev->dev_ops->dev_infos_get)(dev, dev_info);
+
+ dev_info->pci_dev = dev->pci_dev;
+ if (dev->driver)
+ dev_info->driver_name = dev->driver->pci_drv.name;
+}
+
+
+int
+rte_cryptodev_callback_register(uint8_t dev_id,
+ enum rte_cryptodev_event_type event,
+ rte_cryptodev_cb_fn cb_fn, void *cb_arg)
+{
+ struct rte_cryptodev *dev;
+ struct rte_cryptodev_callback *user_cb;
+
+ if (!cb_fn)
+ return (-EINVAL);
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%" PRIu8, dev_id);
+ return (-EINVAL);
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+ rte_spinlock_lock(&rte_cryptodev_cb_lock);
+
+ TAILQ_FOREACH(user_cb, &(dev->link_intr_cbs), next) {
+ if (user_cb->cb_fn == cb_fn &&
+ user_cb->cb_arg == cb_arg &&
+ user_cb->event == event) {
+ break;
+ }
+ }
+
+ /* create a new callback. */
+ if (user_cb == NULL) {
+ user_cb = rte_zmalloc("INTR_USER_CALLBACK",
+ sizeof(struct rte_cryptodev_callback), 0);
+ if (user_cb != NULL) {
+ user_cb->cb_fn = cb_fn;
+ user_cb->cb_arg = cb_arg;
+ user_cb->event = event;
+ TAILQ_INSERT_TAIL(&(dev->link_intr_cbs), user_cb, next);
+ }
+ }
+
+ rte_spinlock_unlock(&rte_cryptodev_cb_lock);
+ return ((user_cb == NULL) ? -ENOMEM : 0);
+}
+
+int
+rte_cryptodev_callback_unregister(uint8_t dev_id,
+ enum rte_cryptodev_event_type event,
+ rte_cryptodev_cb_fn cb_fn, void *cb_arg)
+{
+ int ret;
+ struct rte_cryptodev *dev;
+ struct rte_cryptodev_callback *cb, *next;
+
+ if (!cb_fn)
+ return (-EINVAL);
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%" PRIu8, dev_id);
+ return (-EINVAL);
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+ rte_spinlock_lock(&rte_cryptodev_cb_lock);
+
+ ret = 0;
+ for (cb = TAILQ_FIRST(&dev->link_intr_cbs); cb != NULL; cb = next) {
+
+ next = TAILQ_NEXT(cb, next);
+
+ if (cb->cb_fn != cb_fn || cb->event != event ||
+ (cb->cb_arg != (void *)-1 &&
+ cb->cb_arg != cb_arg))
+ continue;
+
+ /*
+ * if this callback is not executing right now,
+ * then remove it.
+ */
+ if (cb->active == 0) {
+ TAILQ_REMOVE(&(dev->link_intr_cbs), cb, next);
+ rte_free(cb);
+ } else {
+ ret = -EAGAIN;
+ }
+ }
+
+ rte_spinlock_unlock(&rte_cryptodev_cb_lock);
+ return ret;
+}
+
+void
+rte_cryptodev_pmd_callback_process(struct rte_cryptodev *dev,
+ enum rte_cryptodev_event_type event)
+{
+ struct rte_cryptodev_callback *cb_lst;
+ struct rte_cryptodev_callback dev_cb;
+
+ rte_spinlock_lock(&rte_cryptodev_cb_lock);
+ TAILQ_FOREACH(cb_lst, &(dev->link_intr_cbs), next) {
+ if (cb_lst->cb_fn == NULL || cb_lst->event != event)
+ continue;
+ dev_cb = *cb_lst;
+ cb_lst->active = 1;
+ rte_spinlock_unlock(&rte_cryptodev_cb_lock);
+ dev_cb.cb_fn(dev->data->dev_id, dev_cb.event,
+ dev_cb.cb_arg);
+ rte_spinlock_lock(&rte_cryptodev_cb_lock);
+ cb_lst->active = 0;
+ }
+ rte_spinlock_unlock(&rte_cryptodev_cb_lock);
+}
+
+
+static void
+rte_crypto_session_init(struct rte_mempool *mp,
+ void *opaque_arg,
+ void *_sess,
+ __rte_unused unsigned i)
+{
+ struct rte_cryptodev_session *sess = _sess;
+ struct rte_cryptodev *dev = opaque_arg;
+
+ memset(sess, 0, mp->elt_size);
+
+ sess->dev_id = dev->data->dev_id;
+ sess->type = dev->dev_type;
+ sess->mp = mp;
+
+ if (dev->dev_ops->session_initialize)
+ (*dev->dev_ops->session_initialize)(mp, sess->_private);
+}
+
+static int
+rte_crypto_session_pool_create(struct rte_cryptodev *dev, unsigned nb_objs,
+ unsigned obj_cache_size, int socket_id)
+{
+ char mp_name[RTE_CRYPTODEV_NAME_MAX_LEN];
+ unsigned priv_sess_size;
+
+ unsigned n = snprintf(mp_name, sizeof(mp_name), "cdev_%d_sess_mp",
+ dev->data->dev_id);
+ if (n > sizeof(mp_name)) {
+ CDEV_LOG_ERR("Unable to create unique name for session
mempool");
+ return -ENOMEM;
+ }
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->session_get_size, -ENOTSUP);
+ priv_sess_size = (*dev->dev_ops->session_get_size)(dev);
+ if (priv_sess_size == 0) {
+ CDEV_LOG_ERR("%s returned and invalid private session size ",
+ dev->data->name);
+ return -ENOMEM;
+ }
+
+ unsigned elt_size = sizeof(struct rte_cryptodev_session) +
priv_sess_size;
+
+ dev->data->session_pool = rte_mempool_lookup(mp_name);
+ if (dev->data->session_pool != NULL) {
+ if (dev->data->session_pool->elt_size != elt_size ||
+ dev->data->session_pool->cache_size <
obj_cache_size ||
+ dev->data->session_pool->size < nb_objs) {
+
+ CDEV_LOG_ERR("%s mempool already exists with different "
+ "initialization parameters", mp_name);
+ dev->data->session_pool = NULL;
+ return -ENOMEM;
+ }
+ } else {
+ dev->data->session_pool = rte_mempool_create(
+ mp_name, /* mempool name */
+ nb_objs, /* number of elements*/
+ elt_size, /* element size*/
+ obj_cache_size, /* Cache size*/
+ 0, /* private data size */
+ NULL, /* obj initialization constructor */
+ NULL, /* obj initialization constructor arg */
+ rte_crypto_session_init, /* obj constructor */
+ dev, /* obj constructor arg */
+ socket_id, /* socket id */
+ 0); /* flags */
+
+ if (dev->data->session_pool == NULL) {
+ CDEV_LOG_ERR("%s mempool allocation failed", mp_name);
+ return -ENOMEM;
+ }
+ }
+
+ CDEV_LOG_DEBUG("%s mempool created!", mp_name);
+ return 0;
+}
+
+struct rte_cryptodev_session *
+rte_cryptodev_session_create(uint8_t dev_id, struct rte_crypto_xform *xform)
+{
+ struct rte_cryptodev *dev;
+ struct rte_cryptodev_session *sess;
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
+ return NULL;
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+
+ /* Allocate a session structure from the session pool */
+ if (rte_mempool_get(dev->data->session_pool, (void **)&sess)) {
+ CDEV_LOG_ERR("Couldn't get object from session mempool");
+ return NULL;
+ }
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->session_configure, NULL);
+ if (dev->dev_ops->session_configure(dev, xform, sess->_private) ==
+ NULL) {
+ CDEV_LOG_ERR("dev_id %d failed to configure session details",
+ dev_id);
+
+ /* Return session to mempool */
+ rte_mempool_put(sess->mp, (void *)sess);
+ return NULL;
+ }
+
+ return sess;
+}
+
+struct rte_cryptodev_session *
+rte_cryptodev_session_free(uint8_t dev_id, struct rte_cryptodev_session *sess)
+{
+ struct rte_cryptodev *dev;
+
+ if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
+ CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
+ return sess;
+ }
+
+ dev = &rte_crypto_devices[dev_id];
+
+ /* Check the session belongs to this device type */
+ if (sess->type != dev->dev_type)
+ return sess;
+
+ /* Let device implementation clear session material */
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->session_clear, sess);
+ dev->dev_ops->session_clear(dev, (void *)sess->_private);
+
+ /* Return session to mempool */
+ rte_mempool_put(sess->mp, (void *)sess);
+
+ return NULL;
+}
+
+
+static void
+rte_crypto_op_init(struct rte_mempool *mp,
+ __rte_unused void *opaque_arg,
+ void *_op_data,
+ __rte_unused unsigned i)
+{
+ struct rte_crypto_op_data *op_data = _op_data;
+
+ memset(op_data, 0, mp->elt_size);
+
+ op_data->pool = mp;
+}
+
+static void
+rte_crypto_op_pool_init(__rte_unused struct rte_mempool *mp,
+ __rte_unused void *opaque_arg)
+{
+}
+
+struct rte_mempool *
+rte_crypto_op_pool_create(const char *name, unsigned size,
+ unsigned cache_size, unsigned nb_xforms, int socket_id)
+{
+ struct crypto_op_pool_private *priv_data = NULL;
+
+ unsigned elt_size = sizeof(struct rte_crypto_op_data) +
+ (sizeof(struct rte_crypto_xform) * nb_xforms);
+
+ /* lookup mempool in case already allocated */
+ struct rte_mempool *mp = rte_mempool_lookup(name);
+
+ if (mp != NULL) {
+ priv_data = (struct crypto_op_pool_private *)
+ rte_mempool_get_priv(mp);
+
+ if (priv_data->max_nb_xforms < nb_xforms ||
+ mp->elt_size != elt_size ||
+ mp->cache_size < cache_size ||
+ mp->size < size) {
+ mp = NULL;
+ CDEV_LOG_ERR("%s mempool already exists with "
+ "incompatible initialisation
parameters",
+ name);
+ return NULL;
+ }
+ CDEV_LOG_DEBUG("%s mempool already exists, reusing!", name);
+ return mp;
+ }
+
+ mp = rte_mempool_create(
+ name, /* mempool name */
+ size, /* number of elements*/
+ elt_size, /* element size*/
+ cache_size, /* Cache size*/
+ sizeof(struct crypto_op_pool_private), /* private data
size */
+ rte_crypto_op_pool_init, /* pool initialisation
constructor */
+ NULL, /* pool initialisation
constructor argument */
+ rte_crypto_op_init, /* obj constructor */
+ NULL, /* obj constructor
argument */
+ socket_id, /* socket id */
+ 0); /* flags */
+
+ if (mp == NULL) {
+ CDEV_LOG_ERR("failed to allocate %s mempool", name);
+ return NULL;
+ }
+
+ priv_data = (struct crypto_op_pool_private *)rte_mempool_get_priv(mp);
+
+ priv_data->max_nb_xforms = nb_xforms;
+
+ CDEV_LOG_DEBUG("%s mempool created!", name);
+ return mp;
+}
+
+
diff --git a/lib/librte_cryptodev/rte_cryptodev.h
b/lib/librte_cryptodev/rte_cryptodev.h
new file mode 100644
index 0000000..e436356
--- /dev/null
+++ b/lib/librte_cryptodev/rte_cryptodev.h
@@ -0,0 +1,592 @@
+/*-
+ *
+ * Copyright(c) 2015 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_CRYPTODEV_H_
+#define _RTE_CRYPTODEV_H_
+
+/**
+ * @file rte_cryptodev.h
+ *
+ * RTE Cryptographic Device APIs
+ *
+ * Defines RTE Crypto Device APIs for the provisioning of cipher and
+ * authentication operations.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "stddef.h"
+
+#include "rte_crypto.h"
+#include "rte_dev.h"
+
+#define CRYPTODEV_NAME_AESNI_MB_PMD ("cryptodev_aesni_mb_pmd")
+/**< AES-NI Multi buffer PMD device name */
+#define CRYPTODEV_NAME_QAT_PMD ("cryptodev_qat_pmd")
+/**< Intel QAT PMD device name */
+
+/** Crypto device type */
+enum rte_cryptodev_type {
+ RTE_CRYPTODEV_AESNI_MB_PMD = 1, /**< AES-NI multi buffer PMD */
+ RTE_CRYPTODEV_QAT_PMD, /**< QAT PMD */
+};
+
+
+/** Crypto device information */
+struct rte_cryptodev_info {
+ const char *driver_name; /**< Driver name. */
+ enum rte_cryptodev_type dev_type; /**< Device type */
+ struct rte_pci_device *pci_dev; /**< PCI information. */
+ uint16_t max_queue_pairs; /**< Maximum number of queues
+ * pairs supported by device.
+ */
+};
+
+#define RTE_CRYPTODEV_DETACHED (0)
+#define RTE_CRYPTODEV_ATTACHED (1)
+
+/** Definitions of Crypto device event types */
+enum rte_cryptodev_event_type {
+ RTE_CRYPTODEV_EVENT_UNKNOWN, /**< unknown event type */
+ RTE_CRYPTODEV_EVENT_ERROR, /**< error interrupt event */
+ RTE_CRYPTODEV_EVENT_MAX /**< max value of this enum */
+};
+
+/** Crypto device queue pair configuration structure. */
+struct rte_cryptodev_qp_conf {
+ uint32_t nb_descriptors; /**< Number of descriptors per queue pair */
+};
+
+/**
+ * Typedef for application callback function to be registered by application
+ * software for notification of device events
+ *
+ * @param dev_id Crypto device identifier
+ * @param event Crypto device event to register for notification of.
+ * @param cb_arg User specified parameter to be passed as to passed to
+ * users callback function.
+ */
+typedef void (*rte_cryptodev_cb_fn)(uint8_t dev_id,
+ enum rte_cryptodev_event_type event, void *cb_arg);
+
+#ifdef RTE_CRYPTODEV_PERF
+/**
+ * Crypto Device performance counter statistics structure. This structure is
+ * used for RDTSC counters for measuring crypto operations.
+ */
+struct rte_cryptodev_perf_stats {
+ uint64_t t_accumlated; /**< Accumulated time processing
operation */
+ uint64_t t_min; /**< Max time */
+ uint64_t t_max; /**< Min time */
+};
+#endif
+
+/** Crypto Device statistics */
+struct rte_cryptodev_stats {
+ uint64_t enqueued_count; /**< Count of all operations enqueued */
+ uint64_t dequeued_count; /**< Count of all operations dequeued */
+
+ uint64_t enqueue_err_count; /**< Total error count on operations
enqueued */
+ uint64_t dequeue_err_count; /**< Total error count on operations
dequeued */
+
+#ifdef RTE_CRYPTODEV_DETAILED_STATS
+ struct {
+ uint64_t encrypt_ops; /**< Count of encrypt operations */
+ uint64_t encrypt_bytes; /**< Number of bytes encrypted */
+
+ uint64_t decrypt_ops; /**< Count of decrypt operations */
+ uint64_t decrypt_bytes; /**< Number of bytes decrypted */
+ } cipher; /**< Cipher operations stats */
+
+ struct {
+ uint64_t generate_ops; /**< Count of generate operations */
+ uint64_t bytes_hashed; /**< Number of bytes hashed */
+
+ uint64_t verify_ops; /**< Count of verify operations */
+ uint64_t bytes_verified;/**< Number of bytes verified */
+ } hash; /**< Hash operations stats */
+#endif
+
+#ifdef RTE_CRYPTODEV_PERF
+ struct rte_cryptodev_perf_stats op_perf; /**< Operations stats */
+#endif
+} __rte_cache_aligned;
+
+/**
+ * Create a virtual crypto device
+ *
+ * @param name Cryptodev PMD name of device to be created.
+ * @param args Options arguments for device.
+ *
+ * @return
+ * - On successful creation of the cryptodev the device index is returned,
+ * which will be between 0 and rte_cryptodev_count().
+ * - In the case of a failure, returns -1.
+ */
+extern int
+rte_cryptodev_create_vdev(const char *name, const char *args);
+
+/**
+ * Get the device identifier for the named crypto device.
+ *
+ * @param name device name to select the device structure.
+ *
+ * @return
+ * - Returns crypto device identifier on success.
+ * - Return -1 on failure to find named crypto device.
+ */
+extern int
+rte_cryptodev_get_dev_id(const char *name);
+
+/**
+ * Get the total number of crypto devices that have been successfully
+ * initialised.
+ *
+ * @return
+ * - The total number of usable crypto devices.
+ */
+extern uint8_t
+rte_cryptodev_count(void);
+
+extern uint8_t
+rte_cryptodev_count_devtype(enum rte_cryptodev_type type);
+/*
+ * Return the NUMA socket to which a device is connected
+ *
+ * @param dev_id
+ * The identifier of the device
+ * @return
+ * The NUMA socket id to which the device is connected or
+ * a default of zero if the socket could not be determined.
+ * -1 if returned is the dev_id value is out of range.
+ */
+extern int
+rte_cryptodev_socket_id(uint8_t dev_id);
+
+/** Crypto device configuration structure */
+struct rte_cryptodev_config {
+ int socket_id; /**< Socket to allocate resources on */
+ uint16_t nb_queue_pairs; /**< Number of queue pairs to configure
+ * on device */
+
+ struct {
+ uint32_t nb_objs; /**< Number of objects in mempool */
+ uint32_t cache_size; /**< l-core object cache size */
+ } session_mp; /**< Session mempool configuration */
+};
+
+/**
+ * Configure a device.
+ *
+ * This function must be invoked first before any other function in the
+ * API. This function can also be re-invoked when a device is in the
+ * stopped state.
+ *
+ * @param dev_id The identifier of the device to configure.
+ * @param nb_qp_queue The number of queue pairs to set up for the
device.
+ *
+ * @return
+ * - 0: Success, device configured.
+ * - <0: Error code returned by the driver configuration function.
+ */
+extern int
+rte_cryptodev_configure(uint8_t dev_id, struct rte_cryptodev_config *config);
+
+/**
+ * Start an device.
+ *
+ * The device start step is the last one and consists of setting the configured
+ * offload features and in starting the transmit and the receive units of the
+ * device.
+ * On success, all basic functions exported by the API (link status,
+ * receive/transmit, and so on) can be invoked.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @return
+ * - 0: Success, device started.
+ * - <0: Error code of the driver device start function.
+ */
+extern int
+rte_cryptodev_start(uint8_t dev_id);
+
+/**
+ * Stop an device. The device can be restarted with a call to
+ * rte_cryptodev_start()
+ *
+ * @param dev_id The identifier of the device.
+ */
+extern void
+rte_cryptodev_stop(uint8_t dev_id);
+
+/**
+ * Close an device. The device cannot be restarted!
+ *
+ * @param dev_id The identifier of the device.
+ *
+ * @return
+ * - 0 on successfully closing device
+ * - <0 on failure to close device
+ */
+extern int
+rte_cryptodev_close(uint8_t dev_id);
+
+/**
+ * Allocate and set up a receive queue pair for a device.
+ *
+ *
+ * @param dev_id The identifier of the device.
+ * @param queue_pair_id The index of the queue pairs to set up. The
+ * value must be in the range [0, nb_queue_pair
+ * - 1] previously supplied to
+ * rte_cryptodev_configure().
+ * @param qp_conf The pointer to the configuration data to be
+ * used for the queue pair. NULL value is
+ * allowed, in which case default configuration
+ * will be used.
+ * @param socket_id The *socket_id* argument is the socket
+ * identifier in case of NUMA. The value can be
+ * *SOCKET_ID_ANY* if there is no NUMA constraint
+ * for the DMA memory allocated for the receive
+ * queue pair.
+ *
+ * @return
+ * - 0: Success, queue pair correctly set up.
+ * - <0: Queue pair configuration failed
+ */
+extern int
+rte_cryptodev_queue_pair_setup(uint8_t dev_id, uint16_t queue_pair_id,
+ const struct rte_cryptodev_qp_conf *qp_conf, int socket_id);
+
+/**
+ * Start a specified queue pair of a device. It is used
+ * when deferred_start flag of the specified queue is true.
+ *
+ * @param dev_id The identifier of the device
+ * @param queue_pair_id The index of the queue pair to start. The value
+ * must be in the range [0, nb_queue_pair - 1]
+ * previously supplied to
rte_crypto_dev_configure().
+ * @return
+ * - 0: Success, the transmit queue is correctly set up.
+ * - -EINVAL: The dev_id or the queue_id out of range.
+ * - -ENOTSUP: The function not supported in PMD driver.
+ */
+extern int
+rte_cryptodev_queue_pair_start(uint8_t dev_id, uint16_t queue_pair_id);
+
+/**
+ * Stop specified queue pair of a device
+ *
+ * @param dev_id The identifier of the device
+ * @param queue_pair_id The index of the queue pair to stop. The value
+ * must be in the range [0, nb_queue_pair - 1]
+ * previously supplied to
rte_cryptodev_configure().
+ * @return
+ * - 0: Success, the transmit queue is correctly set up.
+ * - -EINVAL: The dev_id or the queue_id out of range.
+ * - -ENOTSUP: The function not supported in PMD driver.
+ */
+extern int
+rte_cryptodev_queue_pair_stop(uint8_t dev_id, uint16_t queue_pair_id);
+
+/**
+ * Get the number of queue pairs on a specific crypto device
+ *
+ * @param dev_id Crypto device identifier.
+ * @return
+ * - The number of configured queue pairs.
+ */
+extern uint16_t
+rte_cryptodev_queue_pair_count(uint8_t dev_id);
+
+
+/**
+ * Retrieve the general I/O statistics of a device.
+ *
+ * @param dev_id The identifier of the device.
+ * @param stats A pointer to a structure of type
+ * *rte_cryptodev_stats* to be filled with the
+ * values of device counters.
+ * @return
+ * - Zero if successful.
+ * - Non-zero otherwise.
+ */
+extern int
+rte_cryptodev_stats_get(uint8_t dev_id, struct rte_cryptodev_stats *stats);
+
+/**
+ * Reset the general I/O statistics of a device.
+ *
+ * @param dev_id The identifier of the device.
+ */
+extern void
+rte_cryptodev_stats_reset(uint8_t dev_id);
+
+/**
+ * Retrieve the contextual information of a device.
+ *
+ * @param dev_id The identifier of the device.
+ * @param dev_info A pointer to a structure of type
+ * *rte_cryptodev_info* to be filled with the
+ * contextual information of the device.
+ */
+extern void
+rte_cryptodev_info_get(uint8_t dev_id, struct rte_cryptodev_info *dev_info);
+
+
+/**
+ * Register a callback function for specific device id.
+ *
+ * @param dev_id Device id.
+ * @param event Event interested.
+ * @param cb_fn User supplied callback function to be called.
+ * @param cb_arg Pointer to the parameters for the registered
callback.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+extern int
+rte_cryptodev_callback_register(uint8_t dev_id,
+ enum rte_cryptodev_event_type event,
+ rte_cryptodev_cb_fn cb_fn, void *cb_arg);
+
+/**
+ * Unregister a callback function for specific device id.
+ *
+ * @param dev_id The device identifier.
+ * @param event Event interested.
+ * @param cb_fn User supplied callback function to be called.
+ * @param cb_arg Pointer to the parameters for the registered
callback.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+extern int
+rte_cryptodev_callback_unregister(uint8_t dev_id,
+ enum rte_cryptodev_event_type event,
+ rte_cryptodev_cb_fn cb_fn, void *cb_arg);
+
+
+typedef uint16_t (*dequeue_pkt_burst_t)(void *qp, struct rte_mbuf **pkts,
+ uint16_t nb_pkts);
+/**< Dequeue processed packets from queue pair of a device. */
+
+typedef uint16_t (*enqueue_pkt_burst_t)(void *qp, struct rte_mbuf **pkts,
+ uint16_t nb_pkts);
+/**< Enqueue packets for processing on queue pair of a device. */
+
+
+struct rte_cryptodev_callback;
+
+/** Structure to keep track of registered callbacks */
+TAILQ_HEAD(rte_cryptodev_cb_list, rte_cryptodev_callback);
+
+/** The data structure associated with each crypto device. */
+struct rte_cryptodev {
+ dequeue_pkt_burst_t dequeue_burst; /**< Pointer to PMD receive
function. */
+ enqueue_pkt_burst_t enqueue_burst; /**< Pointer to PMD transmit
function. */
+
+ const struct rte_cryptodev_driver *driver; /**< Driver for this
device */
+ struct rte_cryptodev_data *data; /**< Pointer to device
data */
+ struct rte_cryptodev_ops *dev_ops; /**< Functions exported
by PMD */
+ struct rte_pci_device *pci_dev; /**< PCI info. supplied
by probing */
+
+ enum rte_cryptodev_type dev_type; /**< Crypto device type
*/
+ enum pmd_type pmd_type; /**< PMD type - PDEV /
VDEV */
+
+ struct rte_cryptodev_cb_list link_intr_cbs;
+ /**< User application callback for interrupts if present */
+
+ uint8_t attached : 1; /**< Flag indicating the device is attached */
+};
+
+
+#define RTE_CRYPTODEV_NAME_MAX_LEN (64)
+/**< Max length of name of crypto PMD */
+
+/**
+ *
+ * The data part, with no function pointers, associated with each crypto
device.
+ *
+ * This structure is safe to place in shared memory to be common among
different
+ * processes in a multi-process configuration.
+ */
+struct rte_cryptodev_data {
+ uint8_t dev_id; /**< Device ID for this
instance */
+ char name[RTE_CRYPTODEV_NAME_MAX_LEN]; /**< Unique identifier name */
+
+ uint8_t dev_started : 1; /**< Device state:
STARTED(1)/STOPPED(0) */
+
+ struct rte_mempool *session_pool; /**< Session memory pool */
+ void **queue_pairs; /**< Array of pointers to queue pairs.
*/
+ uint16_t nb_queue_pairs; /**< Number of device queue pairs. */
+
+ void *dev_private; /**< PMD-specific private data */
+};
+
+extern struct rte_cryptodev *rte_cryptodevs;
+/**
+ *
+ * Dequeue a burst of processed packets from a queue of the crypto device.
+ * The dequeued packets are stored in *rte_mbuf* structures whose pointers are
+ * supplied in the *pkts* array.
+ *
+ * The rte_crypto_dequeue_burst() function returns the number of packets
+ * actually dequeued, which is the number of *rte_mbuf* data structures
+ * effectively supplied into the *pkts* array.
+ *
+ * A return value equal to *nb_pkts* indicates that the queue contained
+ * at least *rx_pkts* packets, and this is likely to signify that other
+ * received packets remain in the input queue. Applications implementing
+ * a "retrieve as much received packets as possible" policy can check this
+ * specific case and keep invoking the rte_crypto_dequeue_burst() function
until
+ * a value less than *nb_pkts* is returned.
+ *
+ * The rte_crypto_dequeue_burst() function does not provide any error
+ * notification to avoid the corresponding overhead.
+ *
+ * @param dev_id The identifier of the device.
+ * @param qp_id The index of the queue pair from which to
+ * retrieve processed packets. The value must be
+ * in the range [0, nb_queue_pair - 1] previously
+ * supplied to rte_cryptodev_configure().
+ * @param pkts The address of an array of pointers to
+ * *rte_mbuf* structures that must be large enough
+ * to store *nb_pkts* pointers in it.
+ * @param nb_pkts The maximum number of packets to dequeue.
+ *
+ * @return
+ * - The number of packets actually dequeued, which is the number
+ * of pointers to *rte_mbuf* structures effectively supplied to the
+ * *pkts* array.
+ */
+static inline uint16_t
+rte_cryptodev_dequeue_burst(uint8_t dev_id, uint16_t qp_id,
+ struct rte_mbuf **pkts, uint16_t nb_pkts)
+{
+ struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
+
+ nb_pkts = (*dev->dequeue_burst)
+ (dev->data->queue_pairs[qp_id], pkts, nb_pkts);
+
+ return nb_pkts;
+}
+
+/**
+ * Enqueue a burst of packets for processing on a crypto device.
+ *
+ * The rte_crypto_enqueue_burst() function is invoked to place packets
+ * on the queue *queue_id* of the device designated by its *dev_id*.
+ *
+ * The *nb_pkts* parameter is the number of packets to process which are
+ * supplied in the *pkts* array of *rte_mbuf* structures.
+ *
+ * The rte_crypto_enqueue_burst() function returns the number of packets it
+ * actually sent. A return value equal to *nb_pkts* means that all packets
+ * have been sent.
+ * *
+ * @param dev_id The identifier of the device.
+ * @param queue_id The index of the transmit queue through
+ * which output packets must be sent. The value
+ * must be in the range [0, nb_queue_pairs - 1]
+ * previously supplied to
rte_cryptodev_configure().
+ * @param tx_pkts The address of an array of *nb_pkts* pointers
+ * to *rte_mbuf* structures which contain the
+ * output packets.
+ * @param nb_pkts The number of packets to transmit.
+ *
+ * @return
+ * The number of packets actually enqueued on the crypto device. The return
+ * value can be less than the value of the *nb_pkts* parameter when the
+ * crypto devices queue is full or has been filled up.
+ */
+static inline uint16_t
+rte_cryptodev_enqueue_burst(uint8_t dev_id, uint16_t qp_id,
+ struct rte_mbuf **pkts, uint16_t nb_pkts)
+{
+ struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
+
+ return (*dev->enqueue_burst)
+ (dev->data->queue_pairs[qp_id], pkts, nb_pkts);
+}
+
+
+/**
+ * Initialise a session for symmetric cryptographic operations.
+ *
+ * This function is used by the client to initialize immutable
+ * parameters of symmetric cryptographic operation.
+ * To perform the operation the rte_cryptodev_enqueue_burst function is
+ * used. Each mbuf should contain a reference to the session
+ * pointer returned from this function contained within it's crypto_op if a
+ * session-based operation is being provisioned. Memory to contain the session
+ * information is allocated from within mempool managed by the cryptodev.
+ *
+ * The rte_cryptodev_session_free must be called to free allocated
+ * memory when the session is no longer required.
+ *
+ * @param dev_id The device identifier.
+ * @param xform Crypto transform chain.
+
+ *
+ * @return
+ * Pointer to the created session or NULL
+ */
+extern struct rte_cryptodev_session *
+rte_cryptodev_session_create(uint8_t dev_id,
+ struct rte_crypto_xform *xform);
+
+
+/**
+ * Free the memory associated with a previously allocated session.
+ *
+ * @param dev_id The device identifier.
+ * @param session Session pointer previously allocated by
+ * *rte_cryptodev_session_create*.
+ *
+ * @return
+ * NULL on successful freeing of session.
+ * Session pointer on failure to free session.
+ */
+extern struct rte_cryptodev_session *
+rte_cryptodev_session_free(uint8_t dev_id,
+ struct rte_cryptodev_session *session);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_CRYPTODEV_H_ */
diff --git a/lib/librte_cryptodev/rte_cryptodev_pmd.h
b/lib/librte_cryptodev/rte_cryptodev_pmd.h
new file mode 100644
index 0000000..9a6271e
--- /dev/null
+++ b/lib/librte_cryptodev/rte_cryptodev_pmd.h
@@ -0,0 +1,577 @@
+/*-
+ *
+ * Copyright(c) 2015 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_CRYPTODEV_PMD_H_
+#define _RTE_CRYPTODEV_PMD_H_
+
+/** @file
+ * RTE Crypto PMD APIs
+ *
+ * @note
+ * These API are from crypto PMD only and user applications should not call
them
+ * directly.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <string.h>
+
+#include <rte_dev.h>
+#include <rte_pci.h>
+#include <rte_malloc.h>
+#include <rte_mbuf.h>
+#include <rte_mempool.h>
+#include <rte_log.h>
+
+#include "rte_crypto.h"
+#include "rte_cryptodev.h"
+
+struct rte_cryptodev_stats;
+struct rte_cryptodev_info;
+struct rte_cryptodev_qp_conf;
+
+enum rte_cryptodev_event_type;
+
+/* Logging Macros */
+
+#define CDEV_LOG_ERR(fmt, args...) do { \
+ RTE_LOG(ERR, CRYPTODEV, "%s() line %u: " fmt "\n", \
+ __func__, __LINE__, ## args); \
+ } while (0)
+
+#define CDEV_PMD_LOG_ERR(dev, fmt, args...) do { \
+ RTE_LOG(ERR, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+ dev, __func__, __LINE__, ## args); \
+ } while (0)
+
+#ifdef RTE_LIBRTE_CRYPTODEV_DEBUG
+#define CDEV_LOG_DEBUG(fmt, args...) do { \
+ RTE_LOG(DEBUG, CRYPTODEV, "%s() line %u: " fmt "\n", \
+ __func__, __LINE__, ## args); \
+ } while (0)
+
+#define CDEV_PMD_TRACE(fmt, args...) do { \
+ RTE_LOG(DEBUG, CRYPTODEV, "[%s] %s: " fmt "\n", dev, __func__,
## args); \
+ } while (0)
+
+#else
+#define CDEV_LOG_DEBUG(fmt, args...)
+#define CDEV_PMD_TRACE(fmt, args...)
+#endif
+
+
+struct rte_cryptodev_session {
+ struct {
+ uint8_t dev_id;
+ enum rte_cryptodev_type type;
+ struct rte_mempool *mp;
+ } __rte_aligned(8);
+
+ char _private[];
+};
+
+struct rte_cryptodev_driver;
+struct rte_cryptodev;
+
+/**
+ * Initialisation function of a crypto driver invoked for each matching
+ * crypto PCI device detected during the PCI probing phase.
+ *
+ * @param drv The pointer to the [matching] crypto driver structure
+ * supplied by the PMD when it registered itself.
+ * @param dev The dev pointer is the address of the *rte_cryptodev*
+ * structure associated with the matching device and which
+ * has been [automatically] allocated in the
+ * *rte_crypto_devices* array.
+ *
+ * @return
+ * - 0: Success, the device is properly initialised by the driver.
+ * In particular, the driver MUST have set up the *dev_ops* pointer
+ * of the *dev* structure.
+ * - <0: Error code of the device initialisation failure.
+ */
+typedef int (*cryptodev_init_t)(struct rte_cryptodev_driver *drv,
+ struct rte_cryptodev *dev);
+
+/**
+ * Finalisation function of a driver invoked for each matching
+ * PCI device detected during the PCI closing phase.
+ *
+ * @param drv The pointer to the [matching] driver structure supplied
+ * by the PMD when it registered itself.
+ * @param dev The dev pointer is the address of the *rte_cryptodev*
+ * structure associated with the matching device and which
+ * has been [automatically] allocated in the
+ * *rte_crypto_devices* array.
+ *
+ * * @return
+ * - 0: Success, the device is properly finalised by the driver.
+ * In particular, the driver MUST free the *dev_ops* pointer
+ * of the *dev* structure.
+ * - <0: Error code of the device initialisation failure.
+ */
+typedef int (*cryptodev_uninit_t)(const struct rte_cryptodev_driver *drv,
+ struct rte_cryptodev *dev);
+
+/**
+ * The structure associated with a PMD driver.
+ *
+ * Each driver acts as a PCI driver and is represented by a generic
+ * *crypto_driver* structure that holds:
+ *
+ * - An *rte_pci_driver* structure (which must be the first field).
+ *
+ * - The *cryptodev_init* function invoked for each matching PCI device.
+ *
+ * - The size of the private data to allocate for each matching device.
+ */
+struct rte_cryptodev_driver {
+ struct rte_pci_driver pci_drv; /**< The PMD is also a PCI driver. */
+ unsigned dev_private_size; /**< Size of device private data. */
+
+ cryptodev_init_t cryptodev_init; /**< Device init function. */
+ cryptodev_uninit_t cryptodev_uninit; /**< Device uninit function. */
+};
+
+
+/** Global structure used for maintaining state of allocated crypto devices */
+struct rte_cryptodev_global {
+ struct rte_cryptodev *devs; /**< Device information array */
+ struct rte_cryptodev_data *data; /**< Device private data */
+ uint8_t nb_devs; /**< Number of devices found */
+ uint8_t max_devs; /**< Max number of devices */
+};
+
+/** pointer to global crypto devices data structure. */
+extern struct rte_cryptodev_global *rte_cryptodev_globals;
+
+/**
+ * Get the rte_cryptodev structure device pointer for the device. Assumes a
+ * valid device index.
+ *
+ * @param dev_id Device ID value to select the device structure.
+ *
+ * @return
+ * - The rte_cryptodev structure pointer for the given device ID.
+ */
+static inline struct rte_cryptodev *
+rte_cryptodev_pmd_get_dev(uint8_t dev_id)
+{
+ return &rte_cryptodev_globals->devs[dev_id];
+}
+
+/**
+ * Get the rte_cryptodev structure device pointer for the named device.
+ *
+ * @param name device name to select the device structure.
+ *
+ * @return
+ * - The rte_cryptodev structure pointer for the given device ID.
+ */
+static inline struct rte_cryptodev *
+rte_cryptodev_pmd_get_named_dev(const char *name)
+{
+ unsigned i;
+
+ if (name == NULL)
+ return NULL;
+
+ for (i = 0; i < rte_cryptodev_globals->max_devs; i++) {
+ if (rte_cryptodev_globals->devs[i].attached ==
RTE_CRYPTODEV_ATTACHED &&
+
strcmp(rte_cryptodev_globals->devs[i].data->name, name) == 0)
+ return &rte_cryptodev_globals->devs[i];
+ }
+
+ return NULL;
+}
+
+/**
+ * Validate if the crypto device index is valid attached crypto device.
+ *
+ * @param dev_id Crypto device index.
+ *
+ * @return
+ * - If the device index is valid (1) or not (0).
+ */
+static inline unsigned
+rte_cryptodev_pmd_is_valid_dev(uint8_t dev_id)
+{
+ struct rte_cryptodev *dev = NULL;
+
+ if (dev_id >= rte_cryptodev_globals->nb_devs)
+ return 0;
+
+ dev = rte_cryptodev_pmd_get_dev(dev_id);
+ if (dev->attached != RTE_CRYPTODEV_ATTACHED)
+ return 0;
+ else
+ return 1;
+}
+
+/**
+ * The pool of rte_cryptodev structures. The size of the pool
+ * is configured at compile-time in the <rte_cryptodev.c> file.
+ */
+extern struct rte_cryptodev rte_crypto_devices[];
+
+
+/**
+ * Definitions of all functions exported by a driver through the
+ * the generic structure of type *crypto_dev_ops* supplied in the
+ * *rte_cryptodev* structure associated with a device.
+ */
+
+/**
+ * Function used to configure device.
+ *
+ * @param dev Crypto device pointer
+ *
+ * @return Returns 0 on success
+ */
+typedef int (*cryptodev_configure_t)(struct rte_cryptodev *dev);
+
+/**
+ * Function used to start a configured device.
+ *
+ * @param dev Crypto device pointer
+ *
+ * @return Returns 0 on success
+ */
+typedef int (*cryptodev_start_t)(struct rte_cryptodev *dev);
+
+/**
+ * Function used to stop a configured device.
+ *
+ * @param dev Crypto device pointer
+ */
+typedef void (*cryptodev_stop_t)(struct rte_cryptodev *dev);
+
+/**
+ Function used to close a configured device.
+ *
+ * @param dev Crypto device pointer
+ */
+typedef int (*cryptodev_close_t)(struct rte_cryptodev *dev);
+
+
+/**
+ * Function used to get statistics of a device.
+ *
+ * @param dev Crypto device pointer
+ * @param stats Pointer to crypto device stats structure to populate
+ */
+typedef void (*cryptodev_stats_get_t)(struct rte_cryptodev *dev,
+ struct rte_cryptodev_stats *stats);
+
+
+/**
+ * Function used to reset statistics of a device.
+ *
+ * @param dev Crypto device pointer
+ */
+typedef void (*cryptodev_stats_reset_t)(struct rte_cryptodev *dev);
+
+
+/**
+ * Function used to get specific information of a device.
+ *
+ * @param dev Crypto device pointer
+ */
+typedef void (*cryptodev_info_get_t)(struct rte_cryptodev *dev,
+ struct rte_cryptodev_info *dev_info);
+
+/**
+ * Start queue pair of a device.
+ *
+ * @param dev Crypto device pointer
+ * @param qp_id Queue Pair Index
+ *
+ * @return Returns 0 on success.
+ */
+typedef int (*cryptodev_queue_pair_start_t)(struct rte_cryptodev *dev,
+ uint16_t qp_id);
+
+/**
+ * Stop queue pair of a device.
+ *
+ * @param dev Crypto device pointer
+ * @param qp_id Queue Pair Index
+ *
+ * @return Returns 0 on success.
+ */
+typedef int (*cryptodev_queue_pair_stop_t)(struct rte_cryptodev *dev,
+ uint16_t qp_id);
+
+/**
+ * Setup a queue pair for a device.
+ *
+ * @param dev Crypto device pointer
+ * @param qp_id Queue Pair Index
+ * @param qp_conf Queue configuration structure
+ * @param socket_id Socket Index
+ *
+ * @return Returns 0 on success.
+ */
+typedef int (*cryptodev_queue_pair_setup_t)(struct rte_cryptodev *dev,
+ uint16_t qp_id, const struct rte_cryptodev_qp_conf *qp_conf,
+ int socket_id);
+
+/**
+ * Release memory resources allocated by given queue pair.
+ *
+ * @param dev Crypto device pointer
+ * @param qp_id Queue Pair Index
+ */
+typedef void (*cryptodev_queue_pair_release_t)(struct rte_cryptodev *dev,
+ uint16_t qp_id);
+
+/**
+ * Get number of available queue pairs of a device.
+ *
+ * @param dev Crypto device pointer
+ *
+ * @return Returns number of queue pairs on success.
+ */
+typedef uint32_t (*cryptodev_queue_pair_count_t)(struct rte_cryptodev *dev);
+
+/**
+ * Create a session mempool to allocate sessions from
+ *
+ * @param dev Crypto device pointer
+ * @param nb_objs number of sessions objects in mempool
+ * @param obj_cache l-core object cache size, see *rte_ring_create*
+ * @param socket_id Socket Id to allocate mempool on.
+ *
+ * @return
+ * - On success returns a pointer to a rte_mempool
+ * - On failure returns a NULL pointer
+ * */
+typedef int (*cryptodev_create_session_pool_t)(
+ struct rte_cryptodev *dev, unsigned nb_objs,
+ unsigned obj_cache_size, int socket_id);
+
+
+/**
+ * Get the size of a cryptodev session
+ *
+ * @param dev Crypto device pointer
+ *
+ * @return
+ * - On success returns the size of the session structure for device
+ * - On failure returns 0
+ * */
+typedef unsigned (*cryptodev_get_session_private_size_t)(
+ struct rte_cryptodev *dev);
+
+/**
+ * Initialize a Crypto session on a device.
+ *
+ * @param dev Crypto device pointer
+ * @param xform Single or chain of crypto xforms
+ * @param priv_sess Pointer to cryptodev's private session structure
+ *
+ * @return
+ * - Returns private session structure on success.
+ * - Returns NULL on failure.
+ * */
+typedef void (*cryptodev_initialize_session_t)(struct rte_mempool *mempool,
+ void *session_private);
+
+/**
+ * Configure a Crypto session on a device.
+ *
+ * @param dev Crypto device pointer
+ * @param xform Single or chain of crypto xforms
+ * @param priv_sess Pointer to cryptodev's private session structure
+ *
+ * @return
+ * - Returns private session structure on success.
+ * - Returns NULL on failure.
+ * */
+typedef void * (*cryptodev_configure_session_t)(struct rte_cryptodev *dev,
+ struct rte_crypto_xform *xform, void *session_private);
+
+/**
+ * Free Crypto session.
+ * @param session Cryptodev session structure to free
+ * */
+typedef void (*cryptodev_free_session_t)(struct rte_cryptodev *dev,
+ void *session_private);
+
+
+/** Crypto device operations function pointer table */
+struct rte_cryptodev_ops {
+ cryptodev_configure_t dev_configure; /**< Configure device. */
+ cryptodev_start_t dev_start; /**< Start device. */
+ cryptodev_stop_t dev_stop; /**< Stop device. */
+ cryptodev_close_t dev_close; /**< Close device. */
+
+ cryptodev_info_get_t dev_infos_get; /**< Get device info. */
+
+ cryptodev_stats_get_t stats_get; /**< Get generic device
statistics. */
+ cryptodev_stats_reset_t stats_reset; /**< Reset generic device
statistics. */
+
+ cryptodev_queue_pair_setup_t queue_pair_setup; /**< Set up a
device queue pair. */
+ cryptodev_queue_pair_release_t queue_pair_release; /**< Release a
queue pair. */
+ cryptodev_queue_pair_start_t queue_pair_start; /**< Start a
queue pair. */
+ cryptodev_queue_pair_stop_t queue_pair_stop; /**< Stop a
queue pair. */
+ cryptodev_queue_pair_count_t queue_pair_count; /**< Get count
of the queue pairs. */
+
+ cryptodev_get_session_private_size_t session_get_size; /**< Return
private session. */
+ cryptodev_initialize_session_t session_initialize; /**<
Initialization function for private session data */
+ cryptodev_configure_session_t session_configure; /**< Configure
a Crypto session. */
+ cryptodev_free_session_t session_clear; /**< Clear a Crypto
sessions private data. */
+};
+
+
+/**
+ * Function for internal use by dummy drivers primarily, e.g. ring-based
+ * driver.
+ * Allocates a new cryptodev slot for an crypto device and returns the pointer
+ * to that slot for the driver to use.
+ *
+ * @param name Unique identifier name for each device
+ * @param type Device type of this Crypto device
+ * @param socket_id Socket to allocate resources on.
+ * @return
+ * - Slot in the rte_dev_devices array for a new device;
+ */
+struct rte_cryptodev *
+rte_cryptodev_pmd_allocate(const char *name, enum pmd_type type, int
socket_id);
+
+/**
+ * Creates a new virtual crypto device and returns the pointer
+ * to that device.
+ *
+ * @param name PMD type name
+ * @param dev_private_size Size of crypto PMDs private data
+ * @param socket_id Socket to allocate resources on.
+ *
+ * @return
+ * - Cryptodev pointer if device is successfully created.
+ * - NULL if device cannot be created.
+ */
+struct rte_cryptodev *
+rte_cryptodev_pmd_virtual_dev_init(const char *name, size_t dev_private_size,
+ int socket_id);
+
+
+/**
+ * Function for internal use by dummy drivers primarily, e.g. ring-based
+ * driver.
+ * Release the specified cryptodev device.
+ *
+ * @param cryptodev
+ * The *cryptodev* pointer is the address of the *rte_cryptodev* structure.
+ * @return
+ * - 0 on success, negative on error
+ */
+extern int
+rte_cryptodev_pmd_release_device(struct rte_cryptodev *cryptodev);
+
+/**
+ * Attach a new device specified by arguments.
+ *
+ * @param devargs
+ * A pointer to a string array describing the new device
+ * to be attached. The string should be a pci address like
+ * '0000:01:00.0' or virtual device name like 'crypto_pcap0'.
+ * @param dev_id
+ * A pointer to a identifier actually attached.
+ * @return
+ * 0 on success and dev_id is filled, negative on error
+ */
+extern int
+rte_cryptodev_pmd_attach(const char *devargs, uint8_t *dev_id);
+
+/**
+ * Detach a device specified by identifier.
+ *
+ * @param dev_id
+ * The identifier of the device to detach.
+ * @param addr
+ * A pointer to a device name actually detached.
+ * @return
+ * 0 on success and devname is filled, negative on error
+ */
+extern int
+rte_cryptodev_pmd_detach(uint8_t dev_id, char *devname);
+
+/**
+ * Register a Crypto [Poll Mode] driver.
+ *
+ * Function invoked by the initialization function of a Crypto driver
+ * to simultaneously register itself as Crypto Poll Mode Driver and to either:
+ *
+ * a - register itself as PCI driver if the crypto device is a physical
+ * device, by invoking the rte_eal_pci_register() function to
+ * register the *pci_drv* structure embedded in the *crypto_drv*
+ * structure, after having stored the address of the
+ * rte_cryptodev_init() function in the *devinit* field of the
+ * *pci_drv* structure.
+ *
+ * During the PCI probing phase, the rte_cryptodev_init()
+ * function is invoked for each PCI [device] matching the
+ * embedded PCI identifiers provided by the driver.
+ *
+ * b, complete the initialization sequence if the device is a virtual
+ * device by calling the rte_cryptodev_init() directly passing a
+ * NULL parameter for the rte_pci_device structure.
+ *
+ * @param crypto_drv crypto_driver structure associated with the crypto
+ * driver.
+ * @param type pmd type
+ */
+extern int
+rte_cryptodev_pmd_driver_register(struct rte_cryptodev_driver *crypto_drv,
+ enum pmd_type type);
+
+/**
+ * Executes all the user application registered callbacks for the specific
+ * device.
+ * *
+ * @param dev Pointer to cryptodev struct
+ * @param event Crypto device interrupt event type.
+ *
+ * @return
+ * void
+ */
+void rte_cryptodev_pmd_callback_process(struct rte_cryptodev *dev,
+ enum rte_cryptodev_event_type event);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_CRYPTODEV_PMD_H_ */
diff --git a/lib/librte_eal/common/include/rte_common.h
b/lib/librte_eal/common/include/rte_common.h
index 3121314..bae4054 100644
--- a/lib/librte_eal/common/include/rte_common.h
+++ b/lib/librte_eal/common/include/rte_common.h
@@ -270,8 +270,23 @@ rte_align64pow2(uint64_t v)
_a > _b ? _a : _b; \
})
+
/*********** Other general functions / macros ********/
+#define FUNC_PTR_OR_ERR_RET(func, retval) do { \
+ if ((func) == NULL) { \
+ RTE_LOG(ERR, PMD, "Function not supported"); \
+ return retval; \
+ } \
+} while (0)
+
+#define FUNC_PTR_OR_RET(func) do { \
+ if ((func) == NULL) { \
+ RTE_LOG(ERR, PMD, "Function not supported"); \
+ return; \
+ } \
+} while (0)
+
#ifdef __SSE2__
#include <emmintrin.h>
/**
diff --git a/lib/librte_eal/common/include/rte_eal.h
b/lib/librte_eal/common/include/rte_eal.h
index f36a792..948cc0a 100644
--- a/lib/librte_eal/common/include/rte_eal.h
+++ b/lib/librte_eal/common/include/rte_eal.h
@@ -115,6 +115,20 @@ enum rte_lcore_role_t rte_eal_lcore_role(unsigned
lcore_id);
*/
enum rte_proc_type_t rte_eal_process_type(void);
+#define PROC_PRIMARY_OR_RET() do { \
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY) { \
+ RTE_LOG(ERR, PMD, "Cannot run in secondary processes"); \
+ return; \
+ } \
+} while (0)
+
+#define PROC_PRIMARY_OR_ERR_RET(retval) do { \
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY) { \
+ RTE_LOG(ERR, PMD, "Cannot run in secondary processes"); \
+ return retval; \
+ } \
+} while (0)
+
/**
* Request iopl privilege for all RPL.
*
diff --git a/lib/librte_eal/common/include/rte_log.h
b/lib/librte_eal/common/include/rte_log.h
index ede0dca..2e47e7f 100644
--- a/lib/librte_eal/common/include/rte_log.h
+++ b/lib/librte_eal/common/include/rte_log.h
@@ -78,6 +78,7 @@ extern struct rte_logs rte_logs;
#define RTE_LOGTYPE_TABLE 0x00004000 /**< Log related to table. */
#define RTE_LOGTYPE_PIPELINE 0x00008000 /**< Log related to pipeline. */
#define RTE_LOGTYPE_MBUF 0x00010000 /**< Log related to mbuf. */
+#define RTE_LOGTYPE_CRYPTODEV 0x00020000 /**< Log related to cryptodev. */
/* these log types can be used in an application */
#define RTE_LOGTYPE_USER1 0x01000000 /**< User-defined log type 1. */
diff --git a/lib/librte_eal/common/include/rte_memory.h
b/lib/librte_eal/common/include/rte_memory.h
index 1bed415..40e8d43 100644
--- a/lib/librte_eal/common/include/rte_memory.h
+++ b/lib/librte_eal/common/include/rte_memory.h
@@ -76,9 +76,19 @@ enum rte_page_sizes {
/**< Return the first cache-aligned value greater or equal to size. */
/**
+ * Force alignment.
+ */
+#define __rte_aligned(a) __attribute__((__aligned__(a)))
+
+/**
* Force alignment to cache line.
*/
-#define __rte_cache_aligned __attribute__((__aligned__(RTE_CACHE_LINE_SIZE)))
+#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
+
+/**
+ * Force a structure to be packed
+ */
+#define __rte_packed __attribute__((__packed__))
typedef uint64_t phys_addr_t; /**< Physical address definition. */
#define RTE_BAD_PHYS_ADDR ((phys_addr_t)-1)
@@ -104,7 +114,7 @@ struct rte_memseg {
/**< store segment MFNs */
uint64_t mfn[DOM0_NUM_MEMBLOCK];
#endif
-} __attribute__((__packed__));
+} __rte_packed;
/**
* Lock page in physical memory and prevent from swapping.
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index b309309..bff6744 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -77,36 +77,6 @@
#define PMD_DEBUG_TRACE(fmt, args...)
#endif
-/* Macros for checking for restricting functions to primary instance only */
-#define PROC_PRIMARY_OR_ERR_RET(retval) do { \
- if (rte_eal_process_type() != RTE_PROC_PRIMARY) { \
- PMD_DEBUG_TRACE("Cannot run in secondary processes\n"); \
- return (retval); \
- } \
-} while (0)
-
-#define PROC_PRIMARY_OR_RET() do { \
- if (rte_eal_process_type() != RTE_PROC_PRIMARY) { \
- PMD_DEBUG_TRACE("Cannot run in secondary processes\n"); \
- return; \
- } \
-} while (0)
-
-/* Macros to check for invalid function pointers in dev_ops structure */
-#define FUNC_PTR_OR_ERR_RET(func, retval) do { \
- if ((func) == NULL) { \
- PMD_DEBUG_TRACE("Function not supported\n"); \
- return (retval); \
- } \
-} while (0)
-
-#define FUNC_PTR_OR_RET(func) do { \
- if ((func) == NULL) { \
- PMD_DEBUG_TRACE("Function not supported\n"); \
- return; \
- } \
-} while (0)
-
/* Macros to check for valid port */
#define VALID_PORTID_OR_ERR_RET(port_id, retval) do { \
if (!rte_eth_dev_is_valid_port(port_id)) { \
diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
index c18b438..b7a2498 100644
--- a/lib/librte_mbuf/rte_mbuf.c
+++ b/lib/librte_mbuf/rte_mbuf.c
@@ -271,6 +271,7 @@ const char *rte_get_rx_ol_flag_name(uint64_t mask)
const char *rte_get_tx_ol_flag_name(uint64_t mask)
{
switch (mask) {
+ case PKT_TX_CRYPTO_OP: return "PKT_TX_CRYPTO_OP";
case PKT_TX_VLAN_PKT: return "PKT_TX_VLAN_PKT";
case PKT_TX_IP_CKSUM: return "PKT_TX_IP_CKSUM";
case PKT_TX_TCP_CKSUM: return "PKT_TX_TCP_CKSUM";
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index d7c9030..281486d 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -98,14 +98,16 @@ extern "C" {
#define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */
#define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR
match. */
#define PKT_RX_QINQ_PKT (1ULL << 15) /**< RX packet with double VLAN
stripped. */
+#define PKT_RX_CRYPTO_DIGEST_BAD (1ULL << 16) /**< Crypto hash digest
verification failed. */
/* add new RX flags here */
/* add new TX flags here */
+#define PKT_TX_CRYPTO_OP (1ULL << 48) /**< Valid Crypto Operation
attached to mbuf */
/**
* Second VLAN insertion (QinQ) flag.
*/
-#define PKT_TX_QINQ_PKT (1ULL << 49) /**< TX packet with double VLAN
inserted. */
+#define PKT_TX_QINQ_PKT (1ULL << 49) /**< TX packet with double
VLAN inserted. */
/**
* TCP segmentation offload. To enable this offload feature for a
@@ -728,6 +730,9 @@ typedef uint8_t MARKER8[0]; /**< generic marker with 1B
alignment */
typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
* with a single assignment */
+/** Opaque accelerator operations declarations */
+struct rte_crypto_op_data;
+
/**
* The generic rte_mbuf, containing a packet mbuf.
*/
@@ -841,6 +846,8 @@ struct rte_mbuf {
/** Timesync flags for use with IEEE1588. */
uint16_t timesync;
+ /* Crypto Accelerator operation */
+ struct rte_crypto_op_data *crypto_op;
} __rte_cache_aligned;
static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
@@ -1622,6 +1629,33 @@ static inline struct rte_mbuf
*rte_pktmbuf_lastseg(struct rte_mbuf *m)
#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
/**
+ * A macro that returns the physical address of the data in the mbuf.
+ *
+ * The returned pointer is cast to type t. Before using this
+ * function, the user must ensure that m_headlen(m) is large enough to
+ * read its data.
+ *
+ * @param m
+ * The packet mbuf.
+ * @param o
+ * The offset into the data to calculate address from.
+ */
+#define rte_pktmbuf_mtophys_offset(m, o) ((phys_addr_t)((char
*)(m)->buf_physaddr + (m)->data_off) + (o))
+
+/**
+ * A macro that returns the physical address of the data in the mbuf.
+ *
+ * The returned pointer is cast to type t. Before using this
+ * function, the user must ensure that m_headlen(m) is large enough to
+ * read its data.
+ *
+ * @param m
+ * The packet mbuf.
+ * @param o
+ * The offset into the data to calculate address from.
+ */
+#define rte_pktmbuf_mtophys(m) rte_pktmbuf_mtophys_offset(m, 0)
+/**
* A macro that returns the length of the packet.
*
* The value can be read or assigned.
@@ -1790,6 +1824,23 @@ static inline int rte_pktmbuf_is_contiguous(const struct
rte_mbuf *m)
*/
void rte_pktmbuf_dump(FILE *f, const struct rte_mbuf *m, unsigned dump_len);
+
+
+/**
+ * Attach a crypto operation to a mbuf.
+ *
+ * @param m
+ * The packet mbuf.
+ * @param op
+ * The crypto operation data structure to attach.
+ */
+static inline void
+rte_pktmbuf_attach_crypto_op(struct rte_mbuf *m, struct rte_crypto_op_data *op)
+{
+ m->crypto_op = op;
+ m->ol_flags |= PKT_TX_CRYPTO_OP;
+}
+
#ifdef __cplusplus
}
#endif
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 9e1909e..4a3c41b 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -114,6 +114,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_KVARGS) += -lrte_kvargs
_LDLIBS-$(CONFIG_RTE_LIBRTE_MBUF) += -lrte_mbuf
_LDLIBS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += -lrte_ip_frag
_LDLIBS-$(CONFIG_RTE_LIBRTE_ETHER) += -lethdev
+_LDLIBS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += -lcryptodev
_LDLIBS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += -lrte_mempool
_LDLIBS-$(CONFIG_RTE_LIBRTE_RING) += -lrte_ring
_LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrte_eal
--
2.4.3
