The wrong bit is being used in PHYREG16 for PHY power down. In addition,
the use of PHYREG 16 is unnecessary if bit 11 of PHYREG 0 is used.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
drivers/net/e1000/base/e1000_phy.c | 15 ---------------
drivers/net/e1000/base/e1000_phy.h | 1 -
2 files changed, 16 deletions(-)
diff --git a/drivers/net/e1000/base/e1000_phy.c
b/drivers/net/e1000/base/e1000_phy.c
index 7620ecf..6bbb379 100644
--- a/drivers/net/e1000/base/e1000_phy.c
+++ b/drivers/net/e1000/base/e1000_phy.c
@@ -3498,16 +3498,10 @@ STATIC s32 e1000_access_phy_wakeup_reg_bm(struct
e1000_hw *hw, u32 offset,
void e1000_power_up_phy_copper(struct e1000_hw *hw)
{
u16 mii_reg = 0;
- u16 power_reg = 0;
/* The PHY will retain its settings across a power down/up cycle */
hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
mii_reg &= ~MII_CR_POWER_DOWN;
- if (hw->phy.type == e1000_phy_i210) {
- hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
- power_reg &= ~GS40G_CS_POWER_DOWN;
- hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
- }
hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
}
@@ -3522,17 +3516,10 @@ void e1000_power_up_phy_copper(struct e1000_hw *hw)
void e1000_power_down_phy_copper(struct e1000_hw *hw)
{
u16 mii_reg = 0;
- u16 power_reg = 0;
/* The PHY will retain its settings across a power down/up cycle */
hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
mii_reg |= MII_CR_POWER_DOWN;
- /* i210 Phy requires an additional bit for power up/down */
- if (hw->phy.type == e1000_phy_i210) {
- hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
- power_reg |= GS40G_CS_POWER_DOWN;
- hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
- }
hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
msec_delay(1);
}
@@ -3563,7 +3550,6 @@ STATIC s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw,
u32 offset, u16 *data,
if (ret_val)
return ret_val;
}
-
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
@@ -3673,7 +3659,6 @@ STATIC s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw,
u32 offset, u16 data,
if (ret_val)
return ret_val;
}
-
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
diff --git a/drivers/net/e1000/base/e1000_phy.h
b/drivers/net/e1000/base/e1000_phy.h
index b30b36e..2b78af0 100644
--- a/drivers/net/e1000/base/e1000_phy.h
+++ b/drivers/net/e1000/base/e1000_phy.h
@@ -143,7 +143,6 @@ bool e1000_is_mphy_ready(struct e1000_hw *hw);
#define GS40G_MAC_LB 0x4140
#define GS40G_MAC_SPEED_1G 0X0006
#define GS40G_COPPER_SPEC 0x0010
-#define GS40G_CS_POWER_DOWN 0x0002
/* BM/HV Specific Registers */
#define BM_PORT_CTRL_PAGE 769
--
1.9.3
