From: Jeremy Spewock <jspew...@iol.unh.edu>
Some NICs tested in DPDK allow for the scattering of packets without an
offload and others enforce that you enable the scattered_rx offload in
testpmd. The current version of the suite for testing support of
scattering packets only tests the case where the NIC supports testing
without the offload, so an expansion of coverage is needed to cover the
second case as well.
depends-on: patch-139227 ("dts: skip test cases based on capabilities")
Signed-off-by: Jeremy Spewock <jspew...@iol.unh.edu>
---
dts/tests/TestSuite_pmd_buffer_scatter.py | 82 ++++++++++++++++-------
1 file changed, 57 insertions(+), 25 deletions(-)
diff --git a/dts/tests/TestSuite_pmd_buffer_scatter.py
b/dts/tests/TestSuite_pmd_buffer_scatter.py
index 645a66b607..0cce9bfc7f 100644
--- a/dts/tests/TestSuite_pmd_buffer_scatter.py
+++ b/dts/tests/TestSuite_pmd_buffer_scatter.py
@@ -16,14 +16,19 @@
"""
import struct
+from typing import ClassVar
from scapy.layers.inet import IP # type: ignore[import]
from scapy.layers.l2 import Ether # type: ignore[import]
-from scapy.packet import Raw # type: ignore[import]
+from scapy.packet import Packet, Raw # type: ignore[import]
from scapy.utils import hexstr # type: ignore[import]
-from framework.remote_session.testpmd_shell import TestPmdForwardingModes,
TestPmdShell
-from framework.test_suite import TestSuite
+from framework.remote_session.testpmd_shell import (
+ NicCapability,
+ TestPmdForwardingModes,
+ TestPmdShell,
+)
+from framework.test_suite import TestSuite, requires
class TestPmdBufferScatter(TestSuite):
@@ -48,13 +53,22 @@ class TestPmdBufferScatter(TestSuite):
and a single byte of packet data stored in a second buffer alongside
the CRC.
"""
+ #: Parameters for testing scatter using testpmd which are universal across
all test cases.
+ base_testpmd_parameters: ClassVar[list[str]] = [
+ "--mbcache=200",
+ "--max-pkt-len=9000",
+ "--port-topology=paired",
+ "--tx-offloads=0x00008000",
+ ]
+
def set_up_suite(self) -> None:
"""Set up the test suite.
Setup:
- Verify that we have at least 2 port links in the current execution
- and increase the MTU of both ports on the traffic generator to 9000
- to support larger packet sizes.
+ Verify that we have at least 2 port links in the current execution
and increase the MTU
+ of both ports on the traffic generator to 9000 to support larger
packet sizes. The
+ traffic generator needs to send and receive packets that are, at
most, as large as the
+ mbuf size of the ports + 5 in each test case, so 9000 should more
than suffice.
"""
self.verify(
len(self._port_links) > 1,
@@ -64,19 +78,19 @@ def set_up_suite(self) -> None:
self.tg_node.main_session.configure_port_mtu(9000,
self._tg_port_egress)
self.tg_node.main_session.configure_port_mtu(9000,
self._tg_port_ingress)
- def scatter_pktgen_send_packet(self, pktsize: int) -> str:
+ def scatter_pktgen_send_packet(self, pktsize: int) -> list[Packet]:
"""Generate and send a packet to the SUT then capture what is
forwarded back.
Generate an IP packet of a specific length and send it to the SUT,
- then capture the resulting received packet and extract its payload.
- The desired length of the packet is met by packing its payload
+ then capture the resulting received packets and filter them down to
the ones that have the
+ correct layers. The desired length of the packet is met by packing its
payload
with the letter "X" in hexadecimal.
Args:
pktsize: Size of the packet to generate and send.
Returns:
- The payload of the received packet as a string.
+ The filtered down list of received packets.
"""
packet = Ether() / IP() / Raw()
packet.getlayer(2).load = ""
@@ -86,51 +100,69 @@ def scatter_pktgen_send_packet(self, pktsize: int) -> str:
for X_in_hex in payload:
packet.load += struct.pack("=B", int("%s%s" % (X_in_hex[0],
X_in_hex[1]), 16))
received_packets = self.send_packet_and_capture(packet)
+ # filter down the list to packets that have the appropriate structure
+ received_packets = list(
+ filter(lambda p: Ether in p and IP in p and Raw in p,
received_packets)
+ )
self.verify(len(received_packets) > 0, "Did not receive any packets.")
- load = hexstr(received_packets[0].getlayer(2), onlyhex=1)
- return load
+ return received_packets
- def pmd_scatter(self, mbsize: int) -> None:
+ def pmd_scatter(self, mbsize: int, extra_testpmd_params: list[str] = [])
-> None:
"""Testpmd support of receiving and sending scattered multi-segment
packets.
Support for scattered packets is shown by sending 5 packets of
differing length
where the length of the packet is calculated by taking mbuf-size + an
offset.
The offsets used in the test are -1, 0, 1, 4, 5 respectively.
+ Args:
+ mbsize: Size to set memory buffers to when starting testpmd.
+ extra_testpmd_params: Additional parameters to add to the base
list when starting
+ testpmd.
+
Test:
- Start testpmd and run functional test with preset mbsize.
+ Start testpmd and run functional test with preset `mbsize`.
"""
testpmd_shell = self.sut_node.create_interactive_shell(
TestPmdShell,
- app_parameters=(
- "--mbcache=200 "
- f"--mbuf-size={mbsize} "
- "--max-pkt-len=9000 "
- "--port-topology=paired "
- "--tx-offloads=0x00008000"
+ app_parameters=" ".join(
+ [*self.base_testpmd_parameters, f"--mbuf-size={mbsize}",
*extra_testpmd_params]
),
privileged=True,
)
with testpmd_shell as testpmd:
testpmd.set_forward_mode(TestPmdForwardingModes.mac)
+ # adjust the MTU of the SUT ports to handle packets at least as
large as `mbsize` + 5
+ for port_id in range(testpmd.number_of_ports):
+ testpmd.set_port_mtu(port_id, 9000)
testpmd.start()
for offset in [-1, 0, 1, 4, 5]:
- recv_payload = self.scatter_pktgen_send_packet(mbsize + offset)
- self._logger.debug(
- f"Payload of scattered packet after forwarding:
\n{recv_payload}"
- )
+ recv_packets = self.scatter_pktgen_send_packet(mbsize + offset)
+ self._logger.debug(f"Relevant captured packets:
\n{recv_packets}")
+
self.verify(
- ("58 " * 8).strip() in recv_payload,
+ any(
+ " ".join(["58"] * 8) in hexstr(pakt.getlayer(2),
onlyhex=1)
+ for pakt in recv_packets
+ ),
"Payload of scattered packet did not match expected
payload with offset "
f"{offset}.",
)
+ testpmd.stop()
+ # reset the MTU of the SUT ports
+ for port_id in range(testpmd.number_of_ports):
+ testpmd.set_port_mtu(port_id, 1500)
+ @requires(NicCapability.scattered_rx)
def test_scatter_mbuf_2048(self) -> None:
"""Run the :meth:`pmd_scatter` test with `mbsize` set to 2048."""
self.pmd_scatter(mbsize=2048)
+ def test_scatter_mbuf_2048_with_offload(self) -> None:
+ """Run the :meth:`pmd_scatter` test with `mbsize` set to 2048 and
rx_scatter offload."""
+ self.pmd_scatter(mbsize=2048,
extra_testpmd_params=["--enable-scatter"])
+
def tear_down_suite(self) -> None:
"""Tear down the test suite.
--
2.45.2
