Test suite for verifying VLAN filtering, stripping, and insertion functionality on Poll Mode Driver.
Signed-off-by: Dean Marx <dm...@iol.unh.edu> --- dts/tests/TestSuite_vlan.py | 171 ++++++++++++++++++++++++++++++++++++ 1 file changed, 171 insertions(+) create mode 100644 dts/tests/TestSuite_vlan.py diff --git a/dts/tests/TestSuite_vlan.py b/dts/tests/TestSuite_vlan.py new file mode 100644 index 0000000000..903398a8a8 --- /dev/null +++ b/dts/tests/TestSuite_vlan.py @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2024 University of New Hampshire + +"""Test the support of VLAN Offload Features by Poll Mode Drivers. + +The test suite ensures that with the correct configuration, a port +will not drop a VLAN tagged packet. In order for this to be successful, +packet header stripping and packet receipts must be enabled on the Poll Mode Driver. +The test suite checks that when these conditions are met, the packet is received without issue. +The suite also checks to ensure that when these conditions are not met, as in the cases where +stripping is disabled, or VLAN packet receipts are disabled, the packet is not received. +Additionally, it checks the case where VLAN header insertion is enabled in transmitted packets, +which should be successful if the previous cases pass. + +""" + +from scapy.layers.l2 import Dot1Q, Ether # type: ignore[import-untyped] +from scapy.packet import Raw # type: ignore[import-untyped] + +from framework.remote_session.testpmd_shell import SimpleForwardingModes, TestPmdShell +from framework.test_suite import TestSuite + + +class TestVlan(TestSuite): + """DPDK VLAN test suite. + + Ensures VLAN packet reception, stripping, and insertion on the Poll Mode Driver + when the appropriate conditions are met. The suite contains four test cases: + + 1. VLAN reception no stripping - verifies that a vlan packet with a tag + within the filter list is received. + 2. VLAN reception stripping - verifies that a vlan packet with a tag + within the filter list is received without the vlan tag. + 3. VLAN no reception - verifies that a vlan packet with a tag not within + the filter list is dropped. + 4. VLAN insertion - verifies that a non vlan packet is received with a vlan + tag when insertion is enabled. + """ + + def set_up_suite(self) -> None: + """Set up the test suite. + + Setup: + Verify that at least two ports are open for session. + """ + self.verify(len(self._port_links) > 1, "Not enough ports") + + def send_vlan_packet_and_verify(self, should_receive: bool, strip: bool, vlan_id: int) -> None: + """Generate a vlan packet, send and verify packet with same payload is received on the dut. + + Args: + should_receive: Indicate whether the packet should be successfully received. + strip: Indicates whether stripping is on or off, and when the vlan tag is + checked for a match. + vlan_id: Expected vlan ID. + """ + packet = Ether() / Dot1Q(vlan=vlan_id) / Raw(load="xxxxx") + received_packets = self.send_packet_and_capture(packet) + test_packet = None + for packet in received_packets: + if b"xxxxx" in packet.load: + test_packet = packet + break + if should_receive: + self.verify( + test_packet is not None, "Packet was dropped when it should have been received" + ) + if test_packet is not None: + if strip: + self.verify( + not test_packet.haslayer(Dot1Q), "Vlan tag was not stripped successfully" + ) + else: + self.verify( + test_packet.vlan == vlan_id, + "The received tag did not match the expected tag", + ) + else: + self.verify( + test_packet is None, + "Packet was received when it should have been dropped", + ) + + def send_packet_and_verify_insertion(self, expected_id: int) -> None: + """Generate a packet with no vlan tag, send and verify on the dut. + + Args: + expected_id: The vlan id that is being inserted through tx_offload configuration. + """ + packet = Ether() / Raw(load="xxxxx") + received_packets = self.send_packet_and_capture(packet) + test_packet = None + for packet in received_packets: + if b"xxxxx" in packet.load: + test_packet = packet + break + self.verify(test_packet is not None, "Packet was dropped when it should have been received") + if test_packet is not None: + self.verify(test_packet.haslayer(Dot1Q), "The received packet did not have a vlan tag") + self.verify( + test_packet.vlan == expected_id, "The received tag did not match the expected tag" + ) + + def vlan_setup(self, port_id: int, filtered_id: int) -> TestPmdShell: + """Setup method for all test cases. + + Args: + shell: TestPmdShell object that is being used inside test case. + port_id: Number of port to use for setup. + filtered_id: ID to be added to the vlan filter list. + """ + testpmd = TestPmdShell(node=self.sut_node) + testpmd.set_forward_mode(SimpleForwardingModes.mac) + testpmd.set_promisc(port_id, False) + testpmd.vlan_filter_set(port=port_id, on=True) + testpmd.rx_vlan(vlan=filtered_id, port=port_id, add=True) + return testpmd + + def test_vlan_receipt_no_stripping(self) -> None: + """Ensure vlan packet is dropped when receipts are enabled and header stripping is disabled. + + Test: + Create an interactive testpmd shell and verify a vlan packet. + """ + testpmd = self.vlan_setup(port_id=0, filtered_id=1) + testpmd.start() + + self.send_vlan_packet_and_verify(True, strip=False, vlan_id=1) + testpmd.close() + + def test_vlan_receipt_stripping(self) -> None: + """Ensure vlan packet received with no tag when receipts and header stripping are enabled. + + Test: + Create an interactive testpmd shell and verify a vlan packet. + """ + testpmd = self.vlan_setup(port_id=0, filtered_id=1) + testpmd.vlan_strip_set(port=0, on=True) + testpmd.start() + + self.send_vlan_packet_and_verify(should_receive=True, strip=True, vlan_id=1) + testpmd.close() + + def test_vlan_no_receipt(self) -> None: + """Ensure vlan packet dropped when filter is on and sent tag not in the filter list. + + Test: + Create an interactive testpmd shell and verify a vlan packet. + """ + testpmd = self.vlan_setup(port_id=0, filtered_id=1) + testpmd.start() + + self.send_vlan_packet_and_verify(should_receive=False, strip=False, vlan_id=2) + testpmd.close() + + def test_vlan_header_insertion(self) -> None: + """Ensure that vlan packet is received with the correct inserted vlan tag. + + Test: + Create an interactive testpmd shell and verify a non-vlan packet. + """ + testpmd = TestPmdShell(node=self.sut_node) + testpmd.set_forward_mode(SimpleForwardingModes.mac) + testpmd.set_promisc(port=0, on=False) + testpmd.port_stop_all() + testpmd.tx_vlan_set(port=1, vlan=51) + testpmd.port_start_all() + testpmd.start() + + self.send_packet_and_verify_insertion(expected_id=51) + testpmd.close() -- 2.44.0
