On 20/07/2024 17:50, Sivaprasad Tummala wrote:
This patch introduces driver support for power management of uncore
components in AMD EPYC processors.
Signed-off-by: Sivaprasad Tummala <[email protected]>
---
drivers/power/amd_uncore/amd_uncore.c | 321 ++++++++++++++++++++++++++
drivers/power/amd_uncore/amd_uncore.h | 226 ++++++++++++++++++
drivers/power/amd_uncore/meson.build | 20 ++
drivers/power/meson.build | 1 +
4 files changed, 568 insertions(+)
create mode 100644 drivers/power/amd_uncore/amd_uncore.c
create mode 100644 drivers/power/amd_uncore/amd_uncore.h
create mode 100644 drivers/power/amd_uncore/meson.build
diff --git a/drivers/power/amd_uncore/amd_uncore.c
b/drivers/power/amd_uncore/amd_uncore.c
new file mode 100644
index 0000000000..f15eaaa307
--- /dev/null
+++ b/drivers/power/amd_uncore/amd_uncore.c
@@ -0,0 +1,321 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 Advanced Micro Devices, Inc.
+ */
+
+#include <errno.h>
+#include <dirent.h>
+#include <fnmatch.h>
+
+#include <rte_memcpy.h>
+
+#include "amd_uncore.h"
+#include "power_common.h"
+#include "e_smi/e_smi.h"
+
+#define MAX_UNCORE_FREQS 8
+#define MAX_NUMA_DIE 8
+
+#define BUS_FREQ 1000
+
+struct __rte_cache_aligned uncore_power_info {
+ unsigned int die; /* Core die id */
+ unsigned int pkg; /* Package id */
+ uint32_t freqs[MAX_UNCORE_FREQS]; /* Frequency array */
+ uint32_t nb_freqs; /* Number of available freqs */
+ uint32_t curr_idx; /* Freq index in freqs array */
+ uint32_t max_freq; /* System max uncore freq */
+ uint32_t min_freq; /* System min uncore freq */
+};
+
+static struct uncore_power_info uncore_info[RTE_MAX_NUMA_NODES][MAX_NUMA_DIE];
+static int esmi_initialized;
+
+static int
+set_uncore_freq_internal(struct uncore_power_info *ui, uint32_t idx)
+{
+ int ret;
+
+ if (idx >= MAX_UNCORE_FREQS || idx >= ui->nb_freqs) {
+ POWER_LOG(DEBUG, "Invalid uncore frequency index %u, which "
+ "should be less than %u", idx, ui->nb_freqs);
+ return -1;
+ }
+
+ ret = esmi_apb_disable(ui->pkg, idx);
+ if (ret != ESMI_SUCCESS) {
+ POWER_LOG(ERR, "DF P-state '%u' set failed for pkg %02u",
+ idx, ui->pkg);
+ return -1;
+ }
+
+ POWER_DEBUG_LOG("DF P-state '%u' to be set for pkg %02u die %02u",
+ idx, ui->pkg, ui->die);
+
+ /* write the minimum value first if the target freq is less than
current max */
+ ui->curr_idx = idx;
+
+ return 0;
+}
+
+/*
+ * Fopen the sys file for the future setting of the uncore die frequency.
+ */
Comment may need updating, as function is not reading any sysfs files
(for the moment, at least).
+static int
+power_init_for_setting_uncore_freq(struct uncore_power_info *ui)
+{
+ /* open and read all uncore sys files */
Comment may need updating, as function is not reading any sysfs files
(for the moment, at least).
+ /* Base max */
+ ui->max_freq = 1800000;
+ ui->min_freq = 1200000;
+
+ return 0;
+}
+
+/*
+ * Get the available uncore frequencies of the specific die by reading the
+ * sys file.
+ */
Comment may need updating, as function is not reading any sysfs files. 3
uncore frequencies hard-coded for the moment, may get via esmi or sysfs
in the future.
+static int
+power_get_available_uncore_freqs(struct uncore_power_info *ui)
+{
+ int ret = -1;
+ uint32_t i, num_uncore_freqs = 3;
+ uint32_t fabric_freqs[] = {
+ /* to be extended for probing support in future */
+ 1800,
+ 1444,
+ 1200
+ };
+
+ if (num_uncore_freqs >= MAX_UNCORE_FREQS) {
+ POWER_LOG(ERR, "Too many available uncore frequencies: %d",
+ num_uncore_freqs);
+ goto out;
+ }
+
+ /* Generate the uncore freq bucket array. */
+ for (i = 0; i < num_uncore_freqs; i++)
+ ui->freqs[i] = fabric_freqs[i] * BUS_FREQ;
+
+ ui->nb_freqs = num_uncore_freqs;
+
+ ret = 0;
+
+ POWER_DEBUG_LOG("%d frequency(s) of pkg %02u die %02u are available",
+ num_uncore_freqs, ui->pkg, ui->die);
+
+out:
+ return ret;
+}
+
--snip--
