added the following methods to testpmd shell class:
vlan set filter on/off, rx vlan add/rm,
vlan set strip on/off, tx vlan set/reset,
set promisc/verbose
Fixes: 61d5bc9bf974 ("dts: add port info command to testpmd shell")
Signed-off-by: Dean Marx <[email protected]>
---
dts/framework/remote_session/testpmd_shell.py | 175 +++++++++++++++++-
1 file changed, 174 insertions(+), 1 deletion(-)
diff --git a/dts/framework/remote_session/testpmd_shell.py
b/dts/framework/remote_session/testpmd_shell.py
index 8c228af39f..5c5e681841 100644
--- a/dts/framework/remote_session/testpmd_shell.py
+++ b/dts/framework/remote_session/testpmd_shell.py
@@ -102,7 +102,7 @@ def make_parser(cls) -> ParserFn:
r"strip (?P<STRIP>on|off), "
r"filter (?P<FILTER>on|off), "
r"extend (?P<EXTEND>on|off), "
- r"qinq strip (?P<QINQ_STRIP>on|off)$",
+ r"qinq strip (?P<QINQ_STRIP>on|off)",
re.MULTILINE,
named=True,
),
@@ -982,6 +982,179 @@ def set_port_mtu_all(self, mtu: int, verify: bool = True)
-> None:
for port in self.ports:
self.set_port_mtu(port.id, mtu, verify)
+ def vlan_filter_set(self, port: int, on: bool, verify: bool = True) ->
None:
+ """Set vlan filter on.
+
+ Args:
+ port: The port number to enable VLAN filter on, should be within
0-32.
+ on: Sets filter on if :data:`True`, otherwise turns off.
+ verify: If :data:`True`, the output of the command and show port
info
+ is scanned to verify that vlan filtering was enabled
successfully.
+ If not, it is considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the filter
+ fails to update.
+ """
+ filter_cmd_output = self.send_command(f"vlan set filter {'on' if on
else 'off'} {port}")
+ if verify:
+ vlan_settings = self.show_port_info(port_id=port).vlan_offload
+ if on ^ (vlan_settings is not None and VLANOffloadFlag.FILTER in
vlan_settings):
+ self._logger.debug(f"Failed to set filter on port {port}:
\n{filter_cmd_output}")
+ raise InteractiveCommandExecutionError(
+ f"Testpmd failed to set VLAN filter on port {port}."
+ )
+
+ def rx_vlan(self, vlan: int, port: int, add: bool, verify: bool = True) ->
None:
+ """Add specified vlan tag to the filter list on a port.
+
+ Args:
+ vlan: The vlan tag to add, should be within 1-1005, 1-4094
extended.
+ port: The port number to add the tag on, should be within 0-32.
+ add: Adds the tag if :data:`True`, otherwise removes tag.
+ verify: If :data:`True`, the output of the command is scanned to
verify that
+ the vlan tag was added to the filter list on the specified
port. If not, it is
+ considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the tag
+ is not added.
+ """
+ rx_output = self.send_command(f"rx_vlan {'add' if add else 'rm'}
{vlan} {port}")
+ if verify:
+ if (
+ "VLAN-filtering disabled" in rx_output
+ or "Invalid vlan_id" in rx_output
+ or "Bad arguments" in rx_output
+ ):
+ self._logger.debug(
+ f"Failed to {'add' if add else 'remove'} tag {vlan} port
{port}: \n{rx_output}"
+ )
+ raise InteractiveCommandExecutionError(
+ f"Testpmd failed to {'add' if add else 'remove'} tag
{vlan} on port {port}."
+ )
+
+ def vlan_strip_set(self, port: int, on: bool, verify: bool = True) -> None:
+ """Enable vlan stripping on the specified port.
+
+ Args:
+ port: The port number to use, should be within 0-32.
+ on: If :data:`True`, will turn strip on, otherwise will turn off.
+ verify: If :data:`True`, the output of the command and show port
info
+ is scanned to verify that vlan stripping was enabled on the
specified port.
+ If not, it is considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
stripping
+ fails to update.
+ """
+ strip_output = self.send_command(f"vlan set strip {'on' if on else
'off'} {port}")
+ if verify:
+ vlan_settings = self.show_port_info(port_id=port).vlan_offload
+ if on ^ (vlan_settings is not None and VLANOffloadFlag.STRIP in
vlan_settings):
+ self._logger.debug(
+ f"Failed to set strip {'on' if on else 'off'} port {port}:
\n{strip_output}"
+ )
+ raise InteractiveCommandExecutionError(
+ f"Testpmd failed to set strip {'on' if on else 'off'} port
{port}."
+ )
+
+ def tx_vlan_set(self, port: int, vlan: int, verify: bool = True) -> None:
+ """Set hardware insertion of vlan tags in packets sent on a port.
+
+ Args:
+ port: The port number to use, should be within 0-32.
+ vlan: The vlan tag to insert, should be within 1-4094.
+ verify: If :data:`True`, the output of the command is scanned to
verify that
+ vlan insertion was enabled on the specified port. If not, it is
+ considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the insertion
+ tag is not set.
+ """
+ vlan_insert_output = self.send_command(f"tx_vlan set {port} {vlan}")
+ if verify:
+ if (
+ "Please stop port" in vlan_insert_output
+ or "Invalid vlan_id" in vlan_insert_output
+ or "Invalid port" in vlan_insert_output
+ ):
+ self._logger.debug(
+ f"Failed to set vlan tag {vlan} on port
{port}:\n{vlan_insert_output}"
+ )
+ raise InteractiveCommandExecutionError(
+ f"Testpmd failed to set vlan insertion tag {vlan} on port
{port}."
+ )
+
+ def tx_vlan_reset(self, port: int, verify: bool = True) -> None:
+ """Disable hardware insertion of vlan tags in packets sent on a port.
+
+ Args:
+ port: The port number to use, should be within 0-32.
+ verify: If :data:`True`, the output of the command is scanned to
verify that
+ vlan insertion was disabled on the specified port. If not, it
is
+ considered an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
the insertion
+ tag is not reset.
+ """
+ vlan_insert_output = self.send_command(f"tx_vlan reset {port}")
+ if verify:
+ if "Please stop port" in vlan_insert_output or "Invalid port" in
vlan_insert_output:
+ self._logger.debug(
+ f"Failed to reset vlan insertion on port {port}:
\n{vlan_insert_output}"
+ )
+ raise InteractiveCommandExecutionError(
+ f"Testpmd failed to reset vlan insertion on port {port}."
+ )
+
+ def set_promisc(self, port: int, on: bool, verify: bool = True) -> None:
+ """Turns promiscuous mode on/off for the specified port.
+
+ Args:
+ port: Port number to use, should be within 0-32.
+ on: If :data:`True`, turn promisc mode on, otherwise turn off.
+ verify: If :data:`True` an additional command will be sent to
verify that promisc mode
+ is properly set. Defaults to :data:`True`.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
promisc mode
+ is not correctly set.
+ """
+ promisc_output = self.send_command(f"set promisc {port} {'on' if on
else 'off'}")
+ if verify:
+ stats = self.show_port_info(port_id=port)
+ if on ^ stats.is_promiscuous_mode_enabled:
+ self._logger.debug(f"Failed to set promisc mode on port
{port}: \n{promisc_output}")
+ raise InteractiveCommandExecutionError(
+ f"Testpmd failed to set promisc mode on port {port}."
+ )
+
+ def set_verbose(self, level: int, verify: bool = True) -> None:
+ """Set debug verbosity level.
+
+ Args:
+ level: 0 - silent except for error
+ 1 - fully verbose except for Tx packets
+ 2 - fully verbose except for Rx packets
+ >2 - fully verbose
+ verify: If :data:`True` the command output will be scanned to
verify that verbose level
+ is properly set. Defaults to :data:`True`.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and
verbose level
+ is not correctly set.
+ """
+ verbose_output = self.send_command(f"set verbose {level}")
+ if verify:
+ if "Change verbose level" not in verbose_output:
+ self._logger.debug(f"Failed to set verbose level to {level}:
\n{verbose_output}")
+ raise InteractiveCommandExecutionError(
+ f"Testpmd failed to set verbose level to {level}."
+ )
+
def _close(self) -> None:
"""Overrides :meth:`~.interactive_shell.close`."""
self.stop()
--
2.44.0
