> -----Original Message----- > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Montorsi, Francesco > Sent: Friday, August 28, 2015 10:07 AM > To: dev at dpdk.org > Subject: [dpdk-dev] "cannot use T= with gcov target" when doing "makefile > clean" with DPDK-2.1.0 > > Hi all, > > I found that after unzipping dpdk-2.1.0.tar.gz if I run: > # make T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc > config > And then > # make V=1 T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc > clean > > I get: > > [...] > == Clean app/proc_info > make -f /home/fmontorsi/Downloads/dpdk-2.1.0/GNUmakefile gcovclean make -f > /home/fmontorsi/Downloads/dpdk-2.1.0/mk/rte.sdkgcov.mk gcovclean > /home/fmontorsi/Downloads/dpdk-2.1.0/mk/rte.sdkgcov.mk:34: *** "Cannot use > T= with gcov target". Stop. > make[2]: *** [gcovclean] Error 2 > make[1]: *** [clean] Error 2 > make: *** [clean] Error 2 > > I guess the fix is: >
Hi Francesco, That fix seems reasonable and you should submit it as a patch. There may be other ways to fix this (there are several ways to fix things within the build system) but if you submit a patch we can get some comments. John. --