Hi Hemant, Le ven. 14 nov. 2025 à 07:25, Hemant Agrawal <[email protected]> a écrit : > > From: Maxime Leroy <[email protected]> > > When using the prefetch Rx path (dpaa2_dev_prefetch_rx), the driver keeps > track of one outstanding VDQCR command per DPIO portal in the global > rte_global_active_dqs_list[] array. Each queue_storage_info_t also stores > the active result buffer and portal index: > > qs->active_dqs > qs->active_dpio_id > > Before issuing a new pull command, dpaa2_dev_prefetch_rx() checks for an > active entry and spins on qbman_check_command_complete() until the > corresponding VDQCR completes. > > On port close / hotplug remove, dpaa2_free_rx_tx_queues() frees all > per-lcore queue_storage_info_t structures and their dq_storage[] buffers, > but never clears the global rte_global_active_dqs_list[] entries. After a > detach/attach sequence (or "del/add" in grout), the prefetch Rx path > still sees an active entry for the portal and spins forever on a stale dq > buffer that has been freed and will never be completed by hardware. In > gdb, dq->dq.tok stays 0 and dpaa2_dev_prefetch_rx() loops in: > > while (!qbman_check_command_complete(get_swp_active_dqs(idx))) > ; > > Fix this by clearing the active VDQ state before freeing queue storage. > For each Rx queue and lcore, if qs->active_dqs is non-NULL, call > clear_swp_active_dqs(qs->active_dpio_id) and set qs->active_dqs to NULL. > Then dpaa2_queue_storage_free() can safely free q_storage and > dq_storage[]. > > After this change, a DPNI detach/attach sequence no longer leaves stale > entries in rte_global_active_dqs_list[], and the prefetch Rx loop does > not hang waiting for a completion from a previous device instance. > > Reproduction: > - grout: > grcli interface add port dpni.1 devargs fslmc:dpni.1 > grcli interface del dpni.1 > grcli interface add port dpni.1 devargs fslmc:dpni.1 > -> Rx was stuck in qbman_check_command_complete(), now works. > > - testpmd: > dpdk-testpmd -n1 -a fslmc:dpni.65535 -- -i --forward-mode=rxonly > testpmd> port attach fslmc:dpni.1 > testpmd> port start all > testpmd> start > testpmd> stop > testpmd> port stop all > testpmd> port detach 0 > testpmd> port attach fslmc:dpni.1 > testpmd> port start all > testpmd> start > -> Rx was hanging, now runs normal > > Fixes: 12d98eceb8ac ("bus/fslmc: enhance QBMAN DQ storage logic") > Cc: [email protected] > Cc: [email protected] > > Signed-off-by: Maxime Leroy <[email protected]> > Acked-by: Hemant Agrawal <[email protected]> > --- > .mailmap | 2 +- > drivers/net/dpaa2/dpaa2_ethdev.c | 23 +++++++++++++++++++++++ > 2 files changed, 24 insertions(+), 1 deletion(-) > > diff --git a/.mailmap b/.mailmap > index 10c37a97a6..d92d4fc24b 100644 > --- a/.mailmap > +++ b/.mailmap > @@ -1035,7 +1035,7 @@ Mauricio Vasquez B <[email protected]> > <mauricio.vasquezbernal@studenti > Mauro Annarumma <[email protected]> > Maxime Coquelin <[email protected]> > Maxime Gouin <[email protected]> > -Maxime Leroy <[email protected]> > +Maxime Leroy <[email protected]> <[email protected]> The order is incorrect. My new email address is [email protected], and it should appear first in the list.
Thank you, Maxime Leroy
