On Thu, Apr 09, 2026 at 10:19:51AM +0000, Anurag Mandal wrote:
> QinQ strip with VLAN TPID 0x88a8 & 0x8100 support was absent.
> 
> This patch adds support for QinQ strip with both Outer VLAN
> TPIDs 0x88a8 (802.1ad) & 0x8100 (802.1Q).
> VLAN Extend should be enabled for the same and Outer VLAN
> TPID should be set properly.
> 
> 1. Tested QinQ stripping with TPIDs 0x88a8 as well as 0x8100.
> 2. Tested Double VLAN stripping i.e. QinQ (802.1ad/802.1Q) &
>    VLAN (802.1Q) stripping simultaneously.
> 3. Tested Single VLAN (802.1Q) stripping.
> 
> Signed-off-by: Anurag Mandal <[email protected]>
Acked-by: Bruce Richardson <[email protected]>

Applied to dpdk-next-net-intel.

Thanks,
/Bruce

> ---
> V4: Addressed ai-code-review suggestions
> V3: Rebased onto next-net-intel-for-next-net
> V2: Addressed Coding Style Warnings
> 
>  doc/guides/nics/intel_vf.rst         | 31 ++++++++++++++
>  drivers/net/intel/iavf/iavf.h        |  2 +
>  drivers/net/intel/iavf/iavf_ethdev.c | 50 +++++++++++++++++++++++
>  drivers/net/intel/iavf/iavf_vchnl.c  | 61 ++++++++++++++++++++++++++--
>  4 files changed, 141 insertions(+), 3 deletions(-)
> 
> diff --git a/doc/guides/nics/intel_vf.rst b/doc/guides/nics/intel_vf.rst
> index 5fa2ddc9ea..dfff69b982 100644
> --- a/doc/guides/nics/intel_vf.rst
> +++ b/doc/guides/nics/intel_vf.rst
> @@ -771,3 +771,34 @@ the VLAN header tag length will be automatically added 
> to MTU when configuring q
>  As a consequence, when attempting to configure a VF port with MTU that,
>  together with a VLAN tag header, exceeds maximum supported MTU,
>  port configuration will fail if kernel driver has configured VLAN filtering 
> on that VF.
> +
> +QinQ strip
> +~~~~~~~~~~
> +
> +QinQ TPID is set as 0x8100 IEEE 802.1Q by default.
> +For QinQ strip with TPID 0x88A8 IEEE 802.1ad,
> +extend VLAN is enabled and VLAN outer TPID is set to 0x88A8.
> +VLAN filter steps can be added before or after.
> +
> +To start ``testpmd``, and enable QinQ strip for TPID 0x88A8 on port 0:
> +
> +.. code-block:: console
> +
> +   ./<build_dir>/app/dpdk-testpmd -l 0-15 -- -i --forward-mode=mac
> +   ...
> +
> +   testpmd> vlan set extend on 0
> +   testpmd> vlan set outer tpid 0x88A8 0
> +   testpmd> vlan set qinq_strip on 0
> +
> +For QinQ strip with TPID 0x8100, extend VLAN is enabled only.
> +
> +To start ``testpmd``, and enable QinQ strip for default TPID on port 0:
> +
> +.. code-block:: console
> +
> +   ./<build_dir>/app/dpdk-testpmd -l 0-15 -- -i --forward-mode=mac
> +   ...
> +
> +   testpmd> vlan set extend on 0
> +   testpmd> vlan set qinq_strip on 0
> diff --git a/drivers/net/intel/iavf/iavf.h b/drivers/net/intel/iavf/iavf.h
> index f8008d0fda..6a77dacf59 100644
> --- a/drivers/net/intel/iavf/iavf.h
> +++ b/drivers/net/intel/iavf/iavf.h
> @@ -387,6 +387,7 @@ struct iavf_adapter {
>       uint16_t fdir_ref_cnt;
>       struct iavf_devargs devargs;
>       bool mac_primary_set;
> +     uint16_t tpid;  /* VLAN tag identifier */
>  };
>  
>  /* IAVF_DEV_PRIVATE_TO */
> @@ -456,6 +457,7 @@ int iavf_configure_rss_key(struct iavf_adapter *adapter);
>  int iavf_configure_queues(struct iavf_adapter *adapter, uint16_t 
> num_queue_pairs);
>  int iavf_get_supported_rxdid(struct iavf_adapter *adapter);
>  int iavf_config_vlan_strip_v2(struct iavf_adapter *adapter, bool enable);
> +int iavf_config_outer_vlan_strip_v2(struct iavf_adapter *adapter, bool 
> enable);
>  int iavf_config_vlan_insert_v2(struct iavf_adapter *adapter, bool enable);
>  int iavf_add_del_vlan_v2(struct iavf_adapter *adapter, uint16_t vlanid,
>                        bool add);
> diff --git a/drivers/net/intel/iavf/iavf_ethdev.c 
> b/drivers/net/intel/iavf/iavf_ethdev.c
> index 3126d9b644..5da2cd43c2 100644
> --- a/drivers/net/intel/iavf/iavf_ethdev.c
> +++ b/drivers/net/intel/iavf/iavf_ethdev.c
> @@ -127,6 +127,8 @@ static int iavf_dev_add_mac_addr(struct rte_eth_dev *dev,
>  static void iavf_dev_del_mac_addr(struct rte_eth_dev *dev, uint32_t index);
>  static int iavf_dev_vlan_filter_set(struct rte_eth_dev *dev,
>                                  uint16_t vlan_id, int on);
> +static int iavf_vlan_tpid_set(struct rte_eth_dev *dev,
> +                          enum rte_vlan_type vlan_type, uint16_t tpid);
>  static int iavf_dev_vlan_offload_set(struct rte_eth_dev *dev, int mask);
>  static int iavf_dev_rss_reta_update(struct rte_eth_dev *dev,
>                                  struct rte_eth_rss_reta_entry64 *reta_conf,
> @@ -226,6 +228,7 @@ static const struct eth_dev_ops iavf_eth_dev_ops = {
>       .mac_addr_remove            = iavf_dev_del_mac_addr,
>       .set_mc_addr_list                       = iavf_set_mc_addr_list,
>       .vlan_filter_set            = iavf_dev_vlan_filter_set,
> +     .vlan_tpid_set              = iavf_vlan_tpid_set,
>       .vlan_offload_set           = iavf_dev_vlan_offload_set,
>       .rx_queue_start             = iavf_dev_rx_queue_start,
>       .rx_queue_stop              = iavf_dev_rx_queue_stop,
> @@ -1365,6 +1368,36 @@ iavf_dev_del_mac_addr(struct rte_eth_dev *dev, 
> uint32_t index)
>       vf->mac_num--;
>  }
>  
> +static int
> +iavf_vlan_tpid_set(struct rte_eth_dev *dev, enum rte_vlan_type vlan_type, 
> uint16_t tpid)
> +{
> +     struct iavf_adapter *adapter =
> +             IAVF_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
> +     struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
> +     int qinq = dev_conf->rxmode.offloads & RTE_ETH_RX_OFFLOAD_VLAN_EXTEND;
> +
> +     if (vlan_type != RTE_ETH_VLAN_TYPE_OUTER) {
> +             PMD_DRV_LOG(ERR, "Unsupported vlan type.");
> +             return -EINVAL;
> +     } else if (!qinq) {
> +             PMD_DRV_LOG(ERR, "VLAN-extend disabled.");
> +             return -ENOSYS;
> +     } else if (tpid != RTE_ETHER_TYPE_VLAN &&
> +                tpid != RTE_ETHER_TYPE_QINQ) {
> +             PMD_DRV_LOG(ERR, "tpid supported 0x8100/0x88A8");
> +             return -ENOTSUP;
> +     }
> +
> +     /* This API only fills internal iavf_adapter structure
> +      * and does not send any signal to hardware.
> +      * Inner VLAN always 0x8100, so not set explicitly.
> +      */
> +     if (qinq && vlan_type == RTE_ETH_VLAN_TYPE_OUTER)
> +             adapter->tpid = tpid; /* Outer VLAN can be 0x88a8 or 0x8100 */
> +
> +     return 0;
> +}
> +
>  static int
>  iavf_disable_vlan_strip_ex(struct rte_eth_dev *dev, int on)
>  {
> @@ -1453,6 +1486,8 @@ iavf_dev_vlan_offload_set_v2(struct rte_eth_dev *dev, 
> int mask)
>       struct iavf_adapter *adapter =
>               IAVF_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
>       bool enable;
> +     int qinq = dev->data->dev_conf.rxmode.offloads &
> +             RTE_ETH_RX_OFFLOAD_VLAN_EXTEND;
>       int err;
>  
>       if (mask & RTE_ETH_VLAN_FILTER_MASK) {
> @@ -1472,6 +1507,20 @@ iavf_dev_vlan_offload_set_v2(struct rte_eth_dev *dev, 
> int mask)
>                       return -EIO;
>       }
>  
> +     if (mask & RTE_ETH_QINQ_STRIP_MASK) {
> +             if (!qinq) {
> +                     PMD_DRV_LOG(ERR, "VLAN-extend disabled");
> +                     return -ENOSYS;
> +             }
> +             enable = !!(rxmode->offloads & RTE_ETH_RX_OFFLOAD_QINQ_STRIP);
> +             err = iavf_config_outer_vlan_strip_v2(adapter, enable);
> +             /* If not support, the stripping is already disabled by PF */
> +             if (err == -ENOTSUP && !enable)
> +                     err = 0;
> +             if (err)
> +                     return -EIO;
> +     }
> +
>       return 0;
>  }
>  
> @@ -2812,6 +2861,7 @@ iavf_dev_init(struct rte_eth_dev *eth_dev)
>       adapter->dev_data = eth_dev->data;
>       adapter->stopped = 1;
>       adapter->mac_primary_set = false;
> +     adapter->tpid = RTE_ETHER_TYPE_VLAN; /* VLAN TPID set to 0x8100 by 
> default */
>  
>       if (iavf_dev_event_handler_init())
>               goto init_vf_err;
> diff --git a/drivers/net/intel/iavf/iavf_vchnl.c 
> b/drivers/net/intel/iavf/iavf_vchnl.c
> index 23d115298c..c2f340db81 100644
> --- a/drivers/net/intel/iavf/iavf_vchnl.c
> +++ b/drivers/net/intel/iavf/iavf_vchnl.c
> @@ -829,6 +829,50 @@ iavf_get_supported_rxdid(struct iavf_adapter *adapter)
>       return 0;
>  }
>  
> +int
> +iavf_config_outer_vlan_strip_v2(struct iavf_adapter *adapter, bool enable)
> +{
> +     struct iavf_info *vf = IAVF_DEV_PRIVATE_TO_VF(adapter);
> +     struct virtchnl_vlan_supported_caps *stripping_caps;
> +     struct virtchnl_vlan_setting vlan_strip;
> +     uint8_t msg_buf[IAVF_AQ_BUF_SZ] = {0};
> +     struct iavf_cmd_info args;
> +     uint32_t *ethertype;
> +     int ret;
> +
> +     memset(&vlan_strip, 0, sizeof(vlan_strip));
> +     stripping_caps = &vf->vlan_v2_caps.offloads.stripping_support;
> +     if ((stripping_caps->outer & VIRTCHNL_VLAN_ETHERTYPE_88A8) &&
> +         (stripping_caps->outer & VIRTCHNL_VLAN_TOGGLE) &&
> +         adapter->tpid == RTE_ETHER_TYPE_QINQ) {
> +             ethertype = &vlan_strip.outer_ethertype_setting;
> +             *ethertype = VIRTCHNL_VLAN_ETHERTYPE_88A8;
> +     } else if ((stripping_caps->outer & VIRTCHNL_VLAN_ETHERTYPE_8100) &&
> +                (stripping_caps->outer & VIRTCHNL_VLAN_TOGGLE) &&
> +                adapter->tpid == RTE_ETHER_TYPE_VLAN) {
> +             ethertype = &vlan_strip.outer_ethertype_setting;
> +             *ethertype = VIRTCHNL_VLAN_ETHERTYPE_8100;
> +     } else {
> +             return -ENOTSUP;
> +     }
> +
> +     vlan_strip.vport_id = vf->vsi_res->vsi_id;
> +
> +     args.ops = enable ? VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 :
> +                         VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2;
> +     args.in_args = (uint8_t *)&vlan_strip;
> +     args.in_args_size = sizeof(vlan_strip);
> +     args.out_buffer = msg_buf;
> +     args.out_size = IAVF_AQ_BUF_SZ;
> +     ret = iavf_execute_vf_cmd_safe(adapter, &args);
> +     if (ret)
> +             PMD_DRV_LOG(ERR, "fail to execute command %s",
> +                         enable ? "VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2" :
> +                                  "VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2");
> +
> +     return ret;
> +}
> +
>  int
>  iavf_config_vlan_strip_v2(struct iavf_adapter *adapter, bool enable)
>  {
> @@ -838,14 +882,20 @@ iavf_config_vlan_strip_v2(struct iavf_adapter *adapter, 
> bool enable)
>       uint8_t msg_buf[IAVF_AQ_BUF_SZ] = {0};
>       struct iavf_cmd_info args;
>       uint32_t *ethertype;
> +     int qinq = adapter->dev_data->dev_conf.rxmode.offloads &
> +                RTE_ETH_RX_OFFLOAD_VLAN_EXTEND;
>       int ret;
>  
>       stripping_caps = &vf->vlan_v2_caps.offloads.stripping_support;
>  
> -     if ((stripping_caps->outer & VIRTCHNL_VLAN_ETHERTYPE_8100) &&
> +     /* When VLAN extend is disabled, Single VLAN mode which is Outer VLAN
> +      * When VLAN extend is enabled, QinQ mode, this API works only on
> +      * Inner VLAN strip which is always 0x8100.
> +      */
> +     if (!qinq && (stripping_caps->outer & VIRTCHNL_VLAN_ETHERTYPE_8100) &&
>           (stripping_caps->outer & VIRTCHNL_VLAN_TOGGLE))
>               ethertype = &vlan_strip.outer_ethertype_setting;
> -     else if ((stripping_caps->inner & VIRTCHNL_VLAN_ETHERTYPE_8100) &&
> +     else if (qinq && (stripping_caps->inner & VIRTCHNL_VLAN_ETHERTYPE_8100) 
> &&
>                (stripping_caps->inner & VIRTCHNL_VLAN_TOGGLE))
>               ethertype = &vlan_strip.inner_ethertype_setting;
>       else
> @@ -921,6 +971,8 @@ iavf_add_del_vlan_v2(struct iavf_adapter *adapter, 
> uint16_t vlanid, bool add)
>       struct virtchnl_vlan *vlan_setting;
>       struct iavf_cmd_info args;
>       uint32_t filtering_caps;
> +     int qinq = adapter->dev_data->dev_conf.rxmode.offloads &
> +                RTE_ETH_RX_OFFLOAD_VLAN_EXTEND;
>       int err;
>  
>       supported_caps = &vf->vlan_v2_caps.filtering.filtering_support;
> @@ -938,7 +990,10 @@ iavf_add_del_vlan_v2(struct iavf_adapter *adapter, 
> uint16_t vlanid, bool add)
>       memset(&vlan_filter, 0, sizeof(vlan_filter));
>       vlan_filter.vport_id = vf->vsi_res->vsi_id;
>       vlan_filter.num_elements = 1;
> -     vlan_setting->tpid = RTE_ETHER_TYPE_VLAN;
> +     if (qinq && adapter->tpid == RTE_ETHER_TYPE_QINQ)
> +             vlan_setting->tpid = RTE_ETHER_TYPE_QINQ;
> +     else
> +             vlan_setting->tpid = RTE_ETHER_TYPE_VLAN;
>       vlan_setting->tci = vlanid;
>  
>       args.ops = add ? VIRTCHNL_OP_ADD_VLAN_V2 : VIRTCHNL_OP_DEL_VLAN_V2;
> -- 
> 2.34.1
> 

Reply via email to