Formatting note: Please avoid top posting (inline replies are preferred), and do not include such disclaimer, not relevant on a mailing list. Thanks
2016-02-10 16:00, Muhammad Zain-ul-Abideen: > Hi Saurabh, > Can you tell me what card you are uing > > > *Regards:* > Zain ul Abideen > > > *Disclaimer**: The information contained in this e-mail and any attachments > is confidential; it is intended only for use of the individual or entity > named above. If the reader of this message is not the intended recipient, > you are notified that any dissemination, distribution or use of this > information is strictly prohibited. If you have received this communication > in error, please delete it and email confirmation to the sender. Thank You.* > > > On Wed, Feb 10, 2016 at 6:30 AM, Saurabh Mishra <saurabh.globe at gmail.com> > wrote: > > > Hi Qian -- > > > > Any suggestions? This is bit urgent. > > > > /Saurabh > > > > On Sat, Feb 6, 2016 at 9:22 AM, Saurabh Mishra <saurabh.globe at gmail.com> > > wrote: > > > > > Hi Qian -- > > > > > > > > > Here's the data from Host: > > > > > > [root at oscompute3 ~]# ethtool -i p3p1 > > > > > > driver: i40e > > > > > > version: 1.0.11-k > > > > > > firmware-version: f4.40 a1.4 n04.53 e80001dc0 > > > > > > bus-info: 0000:04:00.0 > > > > > > supports-statistics: yes > > > > > > supports-test: yes > > > > > > supports-eeprom-access: yes > > > > > > supports-register-dump: yes > > > > > > supports-priv-flags: no > > > > > > [root at oscompute3 ~]# ethtool -i p3p2 > > > > > > driver: i40e > > > > > > version: 1.0.11-k > > > > > > firmware-version: f4.40 a1.4 n04.53 e80001dc0 > > > > > > bus-info: 0000:04:00.1 > > > > > > supports-statistics: yes > > > > > > supports-test: yes > > > > > > supports-eeprom-access: yes > > > > > > supports-register-dump: yes > > > > > > supports-priv-flags: no > > > > > > [root at oscompute3 ~]# > > > > > > EthApp> drvinfo > > > > > > Port 0 driver: rte_i40evf_pmd (ver: RTE 2.2.0) > > > > > > Port 1 driver: rte_i40evf_pmd (ver: RTE 2.2.0) > > > > > > EthApp> > > > > > > On Fri, Feb 5, 2016 at 4:59 PM, Xu, Qian Q <qian.q.xu at intel.com> wrote: > > > > > >> What's your current firmware info, can u run ethtool -i port_interface > > to > > >> check? > > >> > > >> Thanks > > >> Qian > > >> > > >> -----Original Message----- > > >> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Saurabh Mishra > > >> Sent: Saturday, February 06, 2016 6:33 AM > > >> To: dev at dpdk.org; users at dpdk.org > > >> Subject: [dpdk-dev] DPDK i40evf problem in receving packet > > >> > > >> Hi, > > >> > > >> I'm seeing two problems: > > >> > > >> 1) when use our kernel '3.10.88-8.0.0.0.6', we only receive first > > >> packet but not subsequent ones at all after that. However, when I use > > >> centos7.0, then l2fwd is able to receive all the packets. > > >> > > >> 2) I've also seen that on centos7.0, symmetric_mp itself is not working. > > >> dev start fails with 280 error. > > >> > > >> i40evf is giving us lot of headache. The i40evf kernel driver works > > >> without any problem. Host is a centos7 KVM. I've already upgraded > > firmware > > >> to latest. > > >> > > >> [root at localhost ~]# uname -a > > >> > > >> Linux localhost.localdomain 3.10.0-327.4.5.el7.x86_64 #1 SMP Mon Jan 25 > > >> 22:07:14 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux > > >> > > >> [root at localhost ~]# > > >> > > >> [root at localhost ~]# ./symmetric_mp fakeelf --file-prefix=virtaddr -c2 > > >> -m2048 -n1 --base-virtaddr=0x7fa000000000 --proc-type=primary -- -p 3 > > >> --num-procs=1 --proc-id=0 > > >> > > >> EAL: Detected lcore 0 as core 0 on socket 0 > > >> > > >> EAL: Detected lcore 1 as core 0 on socket 0 > > >> > > >> EAL: Support maximum 128 logical core(s) by configuration. > > >> > > >> EAL: Detected 2 lcore(s) > > >> > > >> EAL: No free hugepages reported in hugepages-1048576kB > > >> > > >> EAL: VFIO modules not all loaded, skip VFIO support... > > >> > > >> EAL: Setting up physically contiguous memory... > > >> > > >> EAL: Ask a virtual area of 0x2a800000 bytes > > >> > > >> EAL: Virtual area found at 0x7fa000000000 (size = 0x2a800000) > > >> > > >> EAL: Ask a virtual area of 0x200000 bytes > > >> > > >> EAL: Virtual area found at 0x7fa02a800000 (size = 0x200000) > > >> > > >> EAL: Ask a virtual area of 0x54000000 bytes > > >> > > >> EAL: Virtual area found at 0x7fa02aa00000 (size = 0x54000000) > > >> > > >> EAL: Ask a virtual area of 0x400000 bytes > > >> > > >> EAL: Virtual area found at 0x7fa07ea00000 (size = 0x400000) > > >> > > >> EAL: Ask a virtual area of 0x200000 bytes > > >> > > >> EAL: Virtual area found at 0x7fa07ee00000 (size = 0x200000) > > >> > > >> EAL: Ask a virtual area of 0x200000 bytes > > >> > > >> EAL: Virtual area found at 0x7fa07f000000 (size = 0x200000) > > >> > > >> EAL: Ask a virtual area of 0x600000 bytes > > >> > > >> EAL: Virtual area found at 0x7fa07f200000 (size = 0x600000) > > >> > > >> EAL: Ask a virtual area of 0x200000 bytes > > >> > > >> EAL: Virtual area found at 0x7fa07f800000 (size = 0x200000) > > >> > > >> EAL: Ask a virtual area of 0x200000 bytes > > >> > > >> EAL: Virtual area found at 0x7fa07fa00000 (size = 0x200000) > > >> > > >> EAL: Ask a virtual area of 0x400000 bytes > > >> > > >> EAL: Virtual area found at 0x7fa07fc00000 (size = 0x400000) > > >> > > >> EAL: Requesting 1024 pages of size 2MB from socket 0 > > >> > > >> EAL: TSC frequency is ~2600000 KHz > > >> > > >> EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using > > >> unreliable clock cycles ! > > >> > > >> EAL: Master lcore 1 is ready (tid=3e55900;cpuset=[1]) > > >> > > >> EAL: PCI device 0000:00:09.0 on NUMA socket -1 > > >> > > >> EAL: probe driver: 8086:154c rte_i40evf_pmd > > >> > > >> EAL: PCI memory mapped at 0x7fa080000000 > > >> > > >> EAL: PCI memory mapped at 0x7fa080010000 > > >> > > >> EAL: PCI device 0000:00:0a.0 on NUMA socket -1 > > >> > > >> EAL: probe driver: 8086:154c rte_i40evf_pmd > > >> > > >> EAL: PCI memory mapped at 0x7fa080014000 > > >> > > >> EAL: PCI memory mapped at 0x7fa080024000 > > >> > > >> # Initialising port 0... Queue :1 > > >> > > >> PMD: i40e_dev_rx_queue_setup(): Rx Burst Bulk Alloc Preconditions are > > >> satisfied. Rx Burst Bulk Alloc function will be used on port=0, queue=0. > > >> > > >> PMD: i40e_set_tx_function_flag(): Vector tx can be enabled on this txq. > > >> > > >> PMD: i40e_set_rx_function(): Port[0] doesn't meet Vector Rx > > preconditions > > >> > > >> PMD: i40e_set_rx_function(): Rx Burst Bulk Alloc Preconditions are > > >> satisfied. Rx Burst Bulk Alloc function will be used on port=0. > > >> > > >> PMD: i40e_set_tx_function(): Simple tx finally be used. > > >> > > >> smp_port_init() dev start error 280 > > >> > > >> EAL: Error - exiting with code: 1 > > >> > > >> Cause: Error initialising ports > > >> > > >> [root at localhost ~]# > > >> > > > > > > > >