When a particular speed was specified for a port in testpmd, the flags passed to the underlying API call always included the RTE_ETH_LINK_SPEED_FIXED flag. This flag is not a mandatory part of the bitmap when setting speeds, and is used to disable autonegotiation. It's possible to have a link report only a single speed while still have negotiation enabled, so testpmd needs to be extended to support setting a speed both with and without the flag.
This patch does so by adding optional "autoneg on|off" setting after speed and duplex settings specified by the user. This new option adjusts the presence or absence of the FIXED speed bit in the ethdev configuration structure "rte_eth_conf.link_speeds" bitmap. For backward compatibility, the default value is "autoneg off" for fixed speeds if not specified, meaning that the RTE_ETH_LINK_SPEED_FIXED flag is set on the speed value by default. Signed-off-by: Bruce Richardson <[email protected]> --- V2: * changed syntax to more closely match that of ethtool, adding autoneg on|off at the end of the command. * increased compatibility by ensuring that when no autoneg value is specified, a numeric speed sets the fixed flag (autoneg off), while an "auto" speed keeps autoneg on. --- app/test-pmd/cmdline.c | 90 +++++++++++++++++++-- doc/guides/rel_notes/release_26_11.rst | 6 ++ doc/guides/testpmd_app_ug/testpmd_funcs.rst | 8 +- 3 files changed, 95 insertions(+), 9 deletions(-) diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index 51078a2a73..676ed18aca 100644 --- a/app/test-pmd/cmdline.c +++ b/app/test-pmd/cmdline.c @@ -726,8 +726,8 @@ static void cmd_help_long_parsed(void *parsed_result, "port config (port_id|all)" " speed (10|100|1000|2500|5000|10000|25000|40000|50000|" "100000|200000|400000|800000|auto)" - " duplex (half|full|auto)\n" - " Set speed and duplex for all ports or port_id\n\n" + " duplex (half|full|auto) [autoneg (on|off)]\n" + " Set speed and duplex; optionally enable or disable link autonegotiation\n\n" "port config (port_id|all) loopback (mode)\n" " Set loopback mode for all ports or port_id\n\n" @@ -1395,10 +1395,21 @@ struct cmd_config_speed_all { cmdline_fixed_string_t item2; cmdline_fixed_string_t value1; cmdline_fixed_string_t value2; + cmdline_fixed_string_t autoneg; + cmdline_fixed_string_t autoneg_value; }; +static uint32_t +link_speed_fixed_bit(const char *speed, const char *autoneg) +{ + if (autoneg == NULL) + return strcmp(speed, "auto") == 0 ? 0 : RTE_ETH_LINK_SPEED_FIXED; + + return strcmp(autoneg, "off") == 0 ? RTE_ETH_LINK_SPEED_FIXED : 0; +} + static int -parse_and_check_speed_duplex(char *speedstr, char *duplexstr, uint32_t *speed) +parse_and_check_speed_duplex(char *speedstr, char *duplexstr, bool fixed, uint32_t *speed) { int duplex; @@ -1455,8 +1466,13 @@ parse_and_check_speed_duplex(char *speedstr, char *duplexstr, uint32_t *speed) } } - if (*speed != RTE_ETH_LINK_SPEED_AUTONEG) + if (fixed) { + if (*speed == RTE_ETH_LINK_SPEED_AUTONEG) { + fprintf(stderr, "A fixed link requires a specific speed\n"); + return -1; + } *speed |= RTE_ETH_LINK_SPEED_FIXED; + } return 0; } @@ -1464,9 +1480,11 @@ parse_and_check_speed_duplex(char *speedstr, char *duplexstr, uint32_t *speed) static void cmd_config_speed_all_parsed(void *parsed_result, __rte_unused struct cmdline *cl, - __rte_unused void *data) + void *data) { struct cmd_config_speed_all *res = parsed_result; + /* data is used to identify command variant with/without explicit autoneg setting */ + const char *autoneg = data != NULL ? res->autoneg_value : NULL; uint32_t link_speed; portid_t pid; @@ -1476,7 +1494,7 @@ cmd_config_speed_all_parsed(void *parsed_result, } if (parse_and_check_speed_duplex(res->value1, res->value2, - &link_speed) < 0) + link_speed_fixed_bit(res->value1, autoneg) != 0, &link_speed) < 0) return; RTE_ETH_FOREACH_DEV(pid) { @@ -1504,6 +1522,10 @@ static cmdline_parse_token_string_t cmd_config_speed_all_item2 = static cmdline_parse_token_string_t cmd_config_speed_all_value2 = TOKEN_STRING_INITIALIZER(struct cmd_config_speed_all, value2, "half#full#auto"); +static cmdline_parse_token_string_t cmd_config_speed_all_autoneg_token = + TOKEN_STRING_INITIALIZER(struct cmd_config_speed_all, autoneg, "autoneg"); +static cmdline_parse_token_string_t cmd_config_speed_all_autoneg_value = + TOKEN_STRING_INITIALIZER(struct cmd_config_speed_all, autoneg_value, "on#off"); static cmdline_parse_inst_t cmd_config_speed_all = { .f = cmd_config_speed_all_parsed, @@ -1524,6 +1546,27 @@ static cmdline_parse_inst_t cmd_config_speed_all = { }, }; +static cmdline_parse_inst_t cmd_config_speed_all_autoneg = { + .f = cmd_config_speed_all_parsed, + .data = &cmd_config_speed_all_autoneg, + .help_str = "port config all speed " + "10|100|1000|2500|5000|10000|25000|40000|50000|" + "100000|200000|400000|800000|auto " + "duplex half|full|auto autoneg on|off", + .tokens = { + (void *)&cmd_config_speed_all_port, + (void *)&cmd_config_speed_all_keyword, + (void *)&cmd_config_speed_all_all, + (void *)&cmd_config_speed_all_item1, + (void *)&cmd_config_speed_all_value1, + (void *)&cmd_config_speed_all_item2, + (void *)&cmd_config_speed_all_value2, + (void *)&cmd_config_speed_all_autoneg_token, + (void *)&cmd_config_speed_all_autoneg_value, + NULL, + }, +}; + /* *** configure speed for specific port *** */ struct cmd_config_speed_specific { cmdline_fixed_string_t port; @@ -1533,14 +1576,18 @@ struct cmd_config_speed_specific { cmdline_fixed_string_t item2; cmdline_fixed_string_t value1; cmdline_fixed_string_t value2; + cmdline_fixed_string_t autoneg; + cmdline_fixed_string_t autoneg_value; }; static void cmd_config_speed_specific_parsed(void *parsed_result, __rte_unused struct cmdline *cl, - __rte_unused void *data) + void *data) { struct cmd_config_speed_specific *res = parsed_result; + /* data is used to identify command variant with/without explicit autoneg setting */ + const char *autoneg = data != NULL ? res->autoneg_value : NULL; uint32_t link_speed; if (port_id_is_invalid(res->id, ENABLED_WARN)) @@ -1552,7 +1599,7 @@ cmd_config_speed_specific_parsed(void *parsed_result, } if (parse_and_check_speed_duplex(res->value1, res->value2, - &link_speed) < 0) + link_speed_fixed_bit(res->value1, autoneg) != 0, &link_speed) < 0) return; ports[res->id].dev_conf.link_speeds = link_speed; @@ -1582,6 +1629,10 @@ static cmdline_parse_token_string_t cmd_config_speed_specific_item2 = static cmdline_parse_token_string_t cmd_config_speed_specific_value2 = TOKEN_STRING_INITIALIZER(struct cmd_config_speed_specific, value2, "half#full#auto"); +static cmdline_parse_token_string_t cmd_config_speed_specific_autoneg_token = + TOKEN_STRING_INITIALIZER(struct cmd_config_speed_specific, autoneg, "autoneg"); +static cmdline_parse_token_string_t cmd_config_speed_specific_autoneg_value = + TOKEN_STRING_INITIALIZER(struct cmd_config_speed_specific, autoneg_value, "on#off"); static cmdline_parse_inst_t cmd_config_speed_specific = { .f = cmd_config_speed_specific_parsed, @@ -1602,6 +1653,27 @@ static cmdline_parse_inst_t cmd_config_speed_specific = { }, }; +static cmdline_parse_inst_t cmd_config_speed_specific_autoneg = { + .f = cmd_config_speed_specific_parsed, + .data = &cmd_config_speed_specific_autoneg, + .help_str = "port config <port_id> speed " + "10|100|1000|2500|5000|10000|25000|40000|50000|" + "100000|200000|400000|800000|auto " + "duplex half|full|auto autoneg on|off", + .tokens = { + (void *)&cmd_config_speed_specific_port, + (void *)&cmd_config_speed_specific_keyword, + (void *)&cmd_config_speed_specific_id, + (void *)&cmd_config_speed_specific_item1, + (void *)&cmd_config_speed_specific_value1, + (void *)&cmd_config_speed_specific_item2, + (void *)&cmd_config_speed_specific_value2, + (void *)&cmd_config_speed_specific_autoneg_token, + (void *)&cmd_config_speed_specific_autoneg_value, + NULL, + }, +}; + static int parse_speed_lanes_cfg(portid_t pid, uint32_t lanes) { @@ -14357,7 +14429,9 @@ static cmdline_parse_ctx_t builtin_ctx[] = { &cmd_operate_detach_device, &cmd_set_port_setup_on, &cmd_config_speed_all, + &cmd_config_speed_all_autoneg, &cmd_config_speed_specific, + &cmd_config_speed_specific_autoneg, &cmd_config_speed_lanes_all, &cmd_config_speed_lanes_specific, &cmd_show_speed_lanes, diff --git a/doc/guides/rel_notes/release_26_11.rst b/doc/guides/rel_notes/release_26_11.rst index 8ca8379cc6..29fccf09e3 100644 --- a/doc/guides/rel_notes/release_26_11.rst +++ b/doc/guides/rel_notes/release_26_11.rst @@ -340,6 +340,12 @@ New Features Added ``dpdk-validate-bpf`` tool to pre-validate eBPF programs for compatibility with the ``lib/bpf`` execution context. +* **Added explicit link autonegotiation control in testpmd.** + + Added an optional ``autoneg on|off`` setting after ``duplex`` in the port speed configuration command. + For compatibility with older behavior, if unspecified, + auto-negotiation is disabled by default for numeric speeds, and enabled for "auto" speed selection. + Removed Items ------------- diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst index a967bbef76..6bac4d2763 100644 --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst @@ -2167,7 +2167,13 @@ port config - speed Set the speed and duplex mode for all ports or a specific port:: testpmd> port config (port_id|all) speed (10|100|1000|2500|5000|10000|25000|40000|50000|100000|200000|400000|800000|auto) \ - duplex (half|full|auto) + duplex (half|full|auto) [autoneg (on|off)] + +With ``autoneg on``, the selected speed is advertised with link autonegotiation enabled. +With ``autoneg off``, link autonegotiation is disabled and the selected speed is forced. +If ``autoneg`` parameter is omitted for a numeric speed, link autonegotiation is disabled. +The ``auto`` speed advertises all supported speeds and enables link autonegotiation if ``autoneg`` is omitted. +NOTE: Combining ``auto`` speed with ``autoneg off`` is an error. port config - queues/descriptors ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- 2.55.0
