You should be able to clone networking-ovs-dpdk, switch to kilo branch, and run python setup.py install in the root of networking-ovs-dpdk, that should install agent and mech driver. Then you would need to enable mech driver (ovsdpdk) on the controller in the /etc/neutron/plugins/ml2/ml2_conf.ini And run the right agent on the computes (networking-ovs-dpdk-agent).
There should be pip packeges of networking-ovs-dpdk available shortly, I?ll let you know when that happens. Przemek From: Abhijeet Karve [mailto:abhijeet.ka...@tcs.com] Sent: Thursday, December 24, 2015 6:42 PM To: Czesnowicz, Przemyslaw Cc: dev at dpdk.org; discuss at openvswitch.org; Gray, Mark D Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Getting memory backing issues with qemu parameter passing Hi Przemek, Thank you so much for your quick response. The guide(https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst) which you have suggested that is for openstack vhost user installations with devstack. Can't we have any reference for including ovs-dpdk mechanisam driver for openstack Ubuntu distribution which we are following for compute+controller node setup?" We are facing below listed issues With the current approach of setting up openstack kilo interactively + replacing ovs with ovs-dpdk enabled and Instance creation in openstack with passing that instance id to QEMU command line which further passes the vhost-user sockets to instances for enabling the DPDK libraries in it. 1. Created a flavor m1.hugepages which is backed by hugepage memory, unable to spawn instance with this flavor ? Getting a issue like: No matching hugetlbfs for the number of hugepages assigned to the flavor. 2. Passing socket info to instances via qemu manually and instnaces created are not persistent. Now as you suggested, we are looking in enabling ovsdpdk ml2 mechanism driver and agent all of that in our openstack ubuntu distribution. Would be really appriciate if get any help or ref with explanation. We are using compute + controller node setup and we are using following software platform on compute node: _____________ Openstack: Kilo Distribution: Ubuntu 14.04 OVS Version: 2.4.0 DPDK 2.0.0 _____________ Thanks, Abhijeet Karve From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz at intel.com<mailto:przemyslaw.czesnow...@intel.com>> To: Abhijeet Karve <abhijeet.karve at tcs.com<mailto:abhijeet.karve at tcs.com>> Cc: "dev at dpdk.org<mailto:dev at dpdk.org>" <dev at dpdk.org<mailto:dev at dpdk.org>>, "discuss at openvswitch.org<mailto:discuss at openvswitch.org>" <discuss at openvswitch.org<mailto:discuss at openvswitch.org>>, "Gray, Mark D" <mark.d.gray at intel.com<mailto:mark.d.gray at intel.com>> Date: 12/17/2015 06:32 PM Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser ________________________________ I haven?t tried that approach not sure if that would work, it seems clunky. If you enable ovsdpdk ml2 mechanism driver and agent all of that (add ports to ovs with the right type, pass the sockets to qemu) would be done by OpenStack. Przemek From: Abhijeet Karve [mailto:abhijeet.ka...@tcs.com] Sent: Thursday, December 17, 2015 12:41 PM To: Czesnowicz, Przemyslaw Cc: dev at dpdk.org<mailto:dev at dpdk.org>; discuss at openvswitch.org<mailto:discuss at openvswitch.org>; Gray, Mark D Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser Hi Przemek, Thank you so much for sharing the ref guide. Would be appreciate if clear one doubt. At present we are setting up openstack kilo interactively and further replacing ovs with ovs-dpdk enabled. Once the above setup done, We are creating instance in openstack and passing that instance id to QEMU command line which further passes the vhost-user sockets to instances, enabling the DPDK libraries in it. Isn't this the correct way of integrating ovs-dpdk with openstack? Thanks & Regards Abhijeet Karve From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz at intel.com<mailto:przemyslaw.czesnow...@intel.com>> To: Abhijeet Karve <abhijeet.karve at tcs.com<mailto:abhijeet.karve at tcs.com>> Cc: "dev at dpdk.org<mailto:dev at dpdk.org>" <dev at dpdk.org<mailto:dev at dpdk.org>>, "discuss at openvswitch.org<mailto:discuss at openvswitch.org>" <discuss at openvswitch.org<mailto:discuss at openvswitch.org>>, "Gray, Mark D" <mark.d.gray at intel.com<mailto:mark.d.gray at intel.com>> Date: 12/17/2015 05:27 PM Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser ________________________________ HI Abhijeet, For Kilo you need to use ovsdpdk mechanism driver and a matching agent to integrate ovs-dpdk with OpenStack. The guide you are following only talks about running ovs-dpdk not how it should be integrated with OpenStack. Please follow this guide: https://github.com/openstack/networking-ovs-dpdk/blob/stable/kilo/doc/source/getstarted/ubuntu.rst Best regards Przemek From: Abhijeet Karve [mailto:abhijeet.ka...@tcs.com] Sent: Wednesday, December 16, 2015 9:37 AM To: Czesnowicz, Przemyslaw Cc: dev at dpdk.org<mailto:dev at dpdk.org>; discuss at openvswitch.org<mailto:discuss at openvswitch.org>; Gray, Mark D Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser Hi Przemek, We have configured the accelerated data path between a physical interface to the VM using openvswitch netdev-dpdk with vhost-user support. The VM created with this special data path and vhost library, I am calling as DPDK instance. If assigning ip manually to the newly created Cirros VM instance, We are able to make 2 VM's to communicate on the same compute node. Else it's not associating any ip through DHCP though DHCP is in compute node only. Yes it's a compute + controller node setup and we are using following software platform on compute node: _____________ Openstack: Kilo Distribution: Ubuntu 14.04 OVS Version: 2.4.0 DPDK 2.0.0 _____________ We are following the intel guide https://software.intel.com/en-us/blogs/2015/06/09/building-vhost-user-for-ovs-today-using-dpdk-200 When doing "ovs-vsctl show" in compute node, it shows below output: _____________________________________________ ovs-vsctl show c2ec29a5-992d-4875-8adc-1265c23e0304 Bridge br-ex Port phy-br-ex Interface phy-br-ex type: patch options: {peer=int-br-ex} Port br-ex Interface br-ex type: internal Bridge br-tun fail_mode: secure Port br-tun Interface br-tun type: internal Port patch-int Interface patch-int type: patch options: {peer=patch-tun} Bridge br-int fail_mode: secure Port "qvo0ae19a43-b6" tag: 2 Interface "qvo0ae19a43-b6" Port br-int Interface br-int type: internal Port "qvo31c89856-a2" tag: 1 Interface "qvo31c89856-a2" Port patch-tun Interface patch-tun type: patch options: {peer=patch-int} Port int-br-ex Interface int-br-ex type: patch options: {peer=phy-br-ex} Port "qvo97fef28a-ec" tag: 2 Interface "qvo97fef28a-ec" Bridge br-dpdk Port br-dpdk Interface br-dpdk type: internal Bridge "br0" Port "br0" Interface "br0" type: internal Port "dpdk0" Interface "dpdk0" type: dpdk Port "vhost-user-2" Interface "vhost-user-2" type: dpdkvhostuser Port "vhost-user-0" Interface "vhost-user-0" type: dpdkvhostuser Port "vhost-user-1" Interface "vhost-user-1" type: dpdkvhostuser ovs_version: "2.4.0" root at dpdk:~# _____________________________________________ Open flows output in bridge in compute node are as below: _____________________________________________ root at dpdk:~# ovs-ofctl dump-flows br-tun NXST_FLOW reply (xid=0x4): cookie=0x0, duration=71796.741s, table=0, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=1,in_port=1 actions=resubmit(,2) cookie=0x0, duration=71796.700s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop cookie=0x0, duration=71796.649s, table=2, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0,dl_dst=00:00:00:00:00:00/01:00:00:00:00:00 actions=resubmit(,20) cookie=0x0, duration=71796.610s, table=2, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=0,dl_dst=01:00:00:00:00:00/01:00:00:00:00:00 actions=resubmit(,22) cookie=0x0, duration=71794.631s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1,tun_id=0x5c actions=mod_vlan_vid:2,resubmit(,10) cookie=0x0, duration=71794.316s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1,tun_id=0x57 actions=mod_vlan_vid:1,resubmit(,10) cookie=0x0, duration=71796.565s, table=3, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop cookie=0x0, duration=71796.522s, table=4, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop cookie=0x0, duration=71796.481s, table=10, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=1 actions=learn(table=20,hard_timeout=300,priority=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:0->NXM_OF_VLAN_TCI[],load:NXM_NX_TUN_ID[]->NXM_NX_TUN_ID[],output:NXM_OF_IN_PORT[]),output:1 cookie=0x0, duration=71796.439s, table=20, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=resubmit(,22) cookie=0x0, duration=71796.398s, table=22, n_packets=519, n_bytes=33794, idle_age=19982, hard_age=65534, priority=0 actions=drop root at dpdk:~# root at dpdk:~# root at dpdk:~# root at dpdk:~# ovs-ofctl dump-flows br-tun int NXST_FLOW reply (xid=0x4): cookie=0x0, duration=71801.275s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=2,in_port=10 actions=drop cookie=0x0, duration=71801.862s, table=0, n_packets=661, n_bytes=48912, idle_age=19981, hard_age=65534, priority=1 actions=NORMAL cookie=0x0, duration=71801.817s, table=23, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=0 actions=drop root at dpdk:~# _____________________________________________ Further we don't know what all the network changes(Packet Flow addition) if required for associating IP address through the DHCP. Would be really appreciate if have clarity on DHCP flow establishment. Thanks & Regards Abhijeet Karve From: "Czesnowicz, Przemyslaw" <przemyslaw.czesnowicz at intel.com<mailto:przemyslaw.czesnow...@intel.com>> To: Abhijeet Karve <abhijeet.karve at tcs.com<mailto:abhijeet.karve at tcs.com>>, "Gray, Mark D" <mark.d.gray at intel.com<mailto:mark.d.gray at intel.com>> Cc: "dev at dpdk.org<mailto:dev at dpdk.org>" <dev at dpdk.org<mailto:dev at dpdk.org>>, "discuss at openvswitch.org<mailto:discuss at openvswitch.org>" <discuss at openvswitch.org<mailto:discuss at openvswitch.org>> Date: 12/15/2015 09:13 PM Subject: RE: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# Successfully setup DPDK OVS with vhostuser ________________________________ Hi Abhijeet, If you answer below questions it will help me understand your problem. What do you mean by DPDK instance? Are you able to communicate with other VM's on the same compute node? Can you check if the DHCP requests arrive on the controller node? (I'm assuming this is at least compute+ controller setup) Best regards Przemek > -----Original Message----- > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Abhijeet Karve > Sent: Tuesday, December 15, 2015 5:56 AM > To: Gray, Mark D > Cc: dev at dpdk.org<mailto:dev at dpdk.org>; discuss at > openvswitch.org<mailto:discuss at openvswitch.org> > Subject: Re: [dpdk-dev] DPDK OVS on Ubuntu 14.04# Issue's Resolved# > Successfully setup DPDK OVS with vhostuser > > Dear All, > > After seting up system boot parameters as shown below, the issue is > resolved now & we are able to successfully setup openvswitch netdev-dpdk > with vhostuser support. > > __________________________________________________________ > _______________________________________________________ > Setup 2 sets of huge pages with different sizes. One for Vhost and another > for Guest VM. > Edit /etc/default/grub. > GRUB_CMDLINE_LINUX="iommu=pt intel_iommu=on hugepagesz=1G > hugepages=10 hugepagesz=2M hugepages=4096" > # update-grub > - Mount the huge pages into different directory. > # sudo mount -t hugetlbfs nodev /mnt/huge_2M -o pagesize=2M > # sudo mount -t hugetlbfs nodev /mnt/huge_1G -o pagesize=1G > __________________________________________________________ > _______________________________________________________ > > At present we are facing an issue in Testing DPDK application on setup. In our > scenario, We have DPDK instance launched on top of the Openstack Kilo > compute node. Not able to assign DHCP IP from controller. > > > Thanks & Regards > Abhijeet Karve > > =====-----=====-----===== > Notice: The information contained in this e-mail message and/or > attachments to it may contain confidential or privileged information. If you > are not the intended recipient, any dissemination, use, review, distribution, > printing or copying of the information contained in this e-mail message > and/or attachments to it are strictly prohibited. If you have received this > communication in error, please notify us by reply e-mail or telephone and > immediately and permanently delete the message and any attachments. > Thank you >
