Implement the device reset function.
1, Add the fake RX/TX functions.
2, The reset function tries to stop RX/TX by replacing
the RX/TX functions with the fake ones and getting the
locks to make sure the regular RX/TX finished.
3, After the RX/TX stopped, reset the VF port, and then
release the locks and restore the RX/TX functions.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
doc/guides/rel_notes/release_16_07.rst | 9 +++
drivers/net/ixgbe/ixgbe_ethdev.c | 108 ++++++++++++++++++++++++++++++++-
drivers/net/ixgbe/ixgbe_ethdev.h | 12 +++-
drivers/net/ixgbe/ixgbe_rxtx.c | 42 ++++++++++++-
4 files changed, 168 insertions(+), 3 deletions(-)
diff --git a/doc/guides/rel_notes/release_16_07.rst
b/doc/guides/rel_notes/release_16_07.rst
index a761e3c..d36c4b1 100644
--- a/doc/guides/rel_notes/release_16_07.rst
+++ b/doc/guides/rel_notes/release_16_07.rst
@@ -53,6 +53,15 @@ New Features
VF. To handle this link up/down event, add the mailbox interruption
support to receive the message.
+* **Added device reset support for ixgbe VF.**
+
+ Added the device reset API. APP can call this API to reset the VF port
+ when it's not working.
+ Based on the mailbox interruption support, when VF reseives the control
+ message from PF, it means the PF link state changes, VF uses the reset
+ callback in the message handler to notice the APP. APP need call the device
+ reset API to reset the VF port.
+
Resolved Issues
---------------
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index fd2682f..1e3520b 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -381,6 +381,8 @@ static int ixgbe_dev_udp_tunnel_port_add(struct rte_eth_dev
*dev,
static int ixgbe_dev_udp_tunnel_port_del(struct rte_eth_dev *dev,
struct rte_eth_udp_tunnel *udp_tunnel);
+static int ixgbevf_dev_reset(struct rte_eth_dev *dev);
+
/*
* Define VF Stats MACRO for Non "cleared on read" register
*/
@@ -586,6 +588,7 @@ static const struct eth_dev_ops ixgbevf_eth_dev_ops = {
.reta_query = ixgbe_dev_rss_reta_query,
.rss_hash_update = ixgbe_dev_rss_hash_update,
.rss_hash_conf_get = ixgbe_dev_rss_hash_conf_get,
+ .dev_reset = ixgbevf_dev_reset,
};
/* store statistics names and its offset in stats structure */
@@ -4060,7 +4063,8 @@ ixgbevf_dev_start(struct rte_eth_dev *dev)
ETH_VLAN_EXTEND_MASK;
ixgbevf_vlan_offload_set(dev, mask);
- ixgbevf_dev_rxtx_start(dev);
+ if (ixgbevf_dev_rxtx_start(dev))
+ return -1;
/* check and configure queue intr-vector mapping */
if (dev->data->dev_conf.intr_conf.rxq != 0) {
@@ -7193,6 +7197,108 @@ static void ixgbevf_mbx_process(struct rte_eth_dev *dev)
}
static int
+ixgbevf_dev_reset(struct rte_eth_dev *dev)
+{
+ struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct ixgbe_adapter *adapter =
+ (struct ixgbe_adapter *)dev->data->dev_private;
+ int diag = 0;
+ uint32_t vteiam;
+ uint16_t i;
+ struct ixgbe_rx_queue *rxq;
+ struct ixgbe_tx_queue *txq;
+
+ /* Nothing needs to be done if the device is not started. */
+ if (!dev->data->dev_started)
+ return 0;
+
+ PMD_DRV_LOG(DEBUG, "Link up/down event detected.");
+
+ /**
+ * Stop RX/TX by fake functions and locks.
+ * Fake functions are used to make RX/TX lock easier.
+ */
+ adapter->rx_backup = dev->rx_pkt_burst;
+ adapter->tx_backup = dev->tx_pkt_burst;
+ dev->rx_pkt_burst = ixgbevf_recv_pkts_fake;
+ dev->tx_pkt_burst = ixgbevf_xmit_pkts_fake;
+
+ if (dev->data->rx_queues)
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ rxq = dev->data->rx_queues[i];
+ rte_spinlock_lock(&rxq->rx_lock);
+ }
+
+ if (dev->data->tx_queues)
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ txq = dev->data->tx_queues[i];
+ rte_spinlock_lock(&txq->tx_lock);
+ }
+
+ /* Performance VF reset. */
+ do {
+ dev->data->dev_started = 0;
+ ixgbevf_dev_stop(dev);
+ if (dev->data->dev_conf.intr_conf.lsc == 0)
+ diag = ixgbe_dev_link_update(dev, 0);
+ if (diag) {
+ PMD_INIT_LOG(INFO, "Ixgbe VF reset: "
+ "Failed to update link.");
+ }
+ rte_delay_ms(1000);
+
+ diag = ixgbevf_dev_start(dev);
+ /*If fail to start the device, need to stop/start it again. */
+ if (diag) {
+ PMD_INIT_LOG(ERR, "Ixgbe VF reset: "
+ "Failed to start device.");
+ continue;
+ }
+ dev->data->dev_started = 1;
+ ixgbevf_dev_stats_reset(dev);
+ if (dev->data->dev_conf.intr_conf.lsc == 0)
+ diag = ixgbe_dev_link_update(dev, 0);
+ if (diag) {
+ PMD_INIT_LOG(INFO, "Ixgbe VF reset: "
+ "Failed to update link.");
+ diag = 0;
+ }
+
+ /**
+ * When the PF link is down, there has chance
+ * that VF cannot operate its registers. Will
+ * check if the registers is written
+ * successfully. If not, repeat stop/start until
+ * the PF link is up, in other words, until the
+ * registers can be written.
+ */
+ vteiam = IXGBE_READ_REG(hw, IXGBE_VTEIAM);
+ /* Reference ixgbevf_intr_enable when checking */
+ } while (diag || vteiam != IXGBE_VF_IRQ_ENABLE_MASK);
+
+ /**
+ * Release the locks for queues.
+ * Restore the RX/TX functions.
+ */
+ if (dev->data->rx_queues)
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ rxq = dev->data->rx_queues[i];
+ rte_spinlock_unlock(&rxq->rx_lock);
+ }
+
+ if (dev->data->tx_queues)
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ txq = dev->data->tx_queues[i];
+ rte_spinlock_unlock(&txq->tx_lock);
+ }
+
+ dev->rx_pkt_burst = adapter->rx_backup;
+ dev->tx_pkt_burst = adapter->tx_backup;
+
+ return 0;
+}
+
+static int
ixgbevf_dev_interrupt_get_status(struct rte_eth_dev *dev)
{
uint32_t eicr;
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 701107b..d50fad4 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -289,6 +289,8 @@ struct ixgbe_adapter {
struct rte_timecounter systime_tc;
struct rte_timecounter rx_tstamp_tc;
struct rte_timecounter tx_tstamp_tc;
+ eth_rx_burst_t rx_backup;
+ eth_tx_burst_t tx_backup;
};
#define IXGBE_DEV_PRIVATE_TO_HW(adapter)\
@@ -377,7 +379,7 @@ int ixgbevf_dev_rx_init(struct rte_eth_dev *dev);
void ixgbevf_dev_tx_init(struct rte_eth_dev *dev);
-void ixgbevf_dev_rxtx_start(struct rte_eth_dev *dev);
+int ixgbevf_dev_rxtx_start(struct rte_eth_dev *dev);
uint16_t ixgbe_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
uint16_t nb_pkts);
@@ -409,6 +411,14 @@ uint16_t ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf
**tx_pkts,
uint16_t ixgbe_xmit_pkts_simple(void *tx_queue, struct rte_mbuf **tx_pkts,
uint16_t nb_pkts);
+uint16_t ixgbevf_recv_pkts_fake(void *rx_queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts);
+
+uint16_t ixgbevf_xmit_pkts_fake(void *tx_queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
+
uint16_t ixgbe_xmit_pkts_lock(void *tx_queue,
struct rte_mbuf **tx_pkts,
uint16_t nb_pkts);
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index a45d115..b4e7659 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -5181,7 +5181,7 @@ ixgbevf_dev_tx_init(struct rte_eth_dev *dev)
/*
* [VF] Start Transmit and Receive Units.
*/
-void __attribute__((cold))
+int __attribute__((cold))
ixgbevf_dev_rxtx_start(struct rte_eth_dev *dev)
{
struct ixgbe_hw *hw;
@@ -5218,7 +5218,15 @@ ixgbevf_dev_rxtx_start(struct rte_eth_dev *dev)
txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
} while (--poll_ms && !(txdctl & IXGBE_TXDCTL_ENABLE));
if (!poll_ms)
+#ifndef RTE_NEXT_ABI
PMD_INIT_LOG(ERR, "Could not enable Tx Queue %d", i);
+#else
+ {
+ PMD_INIT_LOG(ERR, "Could not enable Tx Queue %d", i);
+ if (dev->data->dev_conf.txmode.lock_mode)
+ return -1;
+ }
+#endif
}
for (i = 0; i < dev->data->nb_rx_queues; i++) {
@@ -5235,11 +5243,21 @@ ixgbevf_dev_rxtx_start(struct rte_eth_dev *dev)
rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
} while (--poll_ms && !(rxdctl & IXGBE_RXDCTL_ENABLE));
if (!poll_ms)
+#ifndef RTE_NEXT_ABI
+ PMD_INIT_LOG(ERR, "Could not enable Rx Queue %d", i);
+#else
+ {
PMD_INIT_LOG(ERR, "Could not enable Rx Queue %d", i);
+ if (dev->data->dev_conf.rxmode.lock_mode)
+ return -1;
+ }
+#endif
rte_wmb();
IXGBE_WRITE_REG(hw, IXGBE_VFRDT(i), rxq->nb_rx_desc - 1);
}
+
+ return 0;
}
/* Stubs needed for linkage when CONFIG_RTE_IXGBE_INC_VECTOR is set to 'n' */
@@ -5290,3 +5308,25 @@ ixgbe_rxq_vec_setup(struct ixgbe_rx_queue __rte_unused
*rxq)
{
return -1;
}
+
+/**
+ * A fake function to stop receiption.
+ */
+uint16_t
+ixgbevf_recv_pkts_fake(void __rte_unused *rx_queue,
+ struct rte_mbuf __rte_unused **rx_pkts,
+ uint16_t __rte_unused nb_pkts)
+{
+ return 0;
+}
+
+/**
+ * A fake function to stop transmission.
+ */
+uint16_t
+ixgbevf_xmit_pkts_fake(void __rte_unused *tx_queue,
+ struct rte_mbuf __rte_unused **tx_pkts,
+ uint16_t __rte_unused nb_pkts)
+{
+ return 0;
+}
--
1.9.3
