This patch adds ixgbe_read_mng_if_sel_x550em to read NW_MNG_IF_SEL register and save fields such as PHY MDIO_ADD.
Signed-off-by: Beilei Xing <beilei.xing at intel.com> --- drivers/net/ixgbe/base/ixgbe_type.h | 2 ++ drivers/net/ixgbe/base/ixgbe_x550.c | 48 +++++++++++++++++++++++-------------- 2 files changed, 32 insertions(+), 18 deletions(-) diff --git a/drivers/net/ixgbe/base/ixgbe_type.h b/drivers/net/ixgbe/base/ixgbe_type.h index de295e1..da1fe16 100644 --- a/drivers/net/ixgbe/base/ixgbe_type.h +++ b/drivers/net/ixgbe/base/ixgbe_type.h @@ -4134,6 +4134,8 @@ struct ixgbe_hw { #define IXGBE_SB_IOSF_TARGET_KR_PHY 0 #define IXGBE_NW_MNG_IF_SEL 0x00011178 +#define IXGBE_NW_MNG_IF_SEL_MDIO_ACT (1 << 1) +#define IXGBE_NW_MNG_IF_SEL_ENABLE_10_100M (1 << 23) #define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE (1 << 24) #define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT 3 #define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD \ diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c index aaf6572..993ef16 100644 --- a/drivers/net/ixgbe/base/ixgbe_x550.c +++ b/drivers/net/ixgbe/base/ixgbe_x550.c @@ -338,9 +338,8 @@ static s32 ixgbe_identify_phy_1g(struct ixgbe_hw *hw) { u16 phy_id_high; u16 phy_id_low; - u32 val = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); + u32 val; - hw->phy.addr = (val >> 3) & 0x1F; val = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, hw->phy.addr, &phy_id_high); if (val || phy_id_high == 0xFFFF) { @@ -1843,6 +1842,33 @@ STATIC s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw, } /** + * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register + * @hw: pointer to hardware structure + * + * Read NW_MNG_IF_SEL register and save field values, and check for valid field + * values. + **/ +STATIC s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw) +{ + /* Save NW management interface connected on board. This is used + * to determine internal PHY mode. + */ + hw->phy.nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); + + /* If X552 (X550EM_a) and MDIO is connected to external PHY, then set + * PHY address. This register field was has only been used for X552. + */ + if (hw->mac.type == ixgbe_mac_X550EM_a && + hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_MDIO_ACT) { + hw->phy.addr = (hw->phy.nw_mng_if_sel & + IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) >> + IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT; + } + + return IXGBE_SUCCESS; +} + +/** * ixgbe_init_phy_ops_X550em - PHY/SFP specific init * @hw: pointer to hardware structure * @@ -1859,14 +1885,11 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) hw->mac.ops.set_lan_id(hw); + ixgbe_read_mng_if_sel_x550em(hw); + if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) { phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; ixgbe_setup_mux_ctl(hw); - - /* Save NW management interface connected on board. This is used - * to determine internal PHY mode. - */ - phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em; } @@ -1893,11 +1916,6 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) phy->ops.write_reg = ixgbe_write_phy_reg_x550em; break; case ixgbe_phy_x550em_ext_t: - /* Save NW management interface connected on board. This is used - * to determine internal PHY mode - */ - phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); - /* If internal link mode is XFI, then setup iXFI internal link, * else setup KR now. */ @@ -2256,12 +2274,6 @@ s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, /* Configure internal PHY for KR/KX. */ ixgbe_setup_kr_speed_x550em(hw, speed); - /* Get CS4227 MDIO address */ - hw->phy.addr = - (hw->phy.nw_mng_if_sel & - IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) - >> IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT; - if (hw->phy.addr == 0x0 || hw->phy.addr == 0xFFFF) { /* Find Address */ DEBUGOUT("Invalid NW_MNG_IF_SEL.MDIO_PHY_ADD value\n"); -- 2.5.0