Inline TX will be fully managed by the PMD after Verbs is bypassed in the
data path. Remove the current code until then.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro at 6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
---
config/common_base | 1 -
doc/guides/nics/mlx5.rst | 10 ------
drivers/net/mlx5/Makefile | 4 ---
drivers/net/mlx5/mlx5_defs.h | 5 ---
drivers/net/mlx5/mlx5_rxtx.c | 73 +++++++++++++++-----------------------------
drivers/net/mlx5/mlx5_rxtx.h | 9 ------
drivers/net/mlx5/mlx5_txq.c | 16 ----------
7 files changed, 25 insertions(+), 93 deletions(-)
diff --git a/config/common_base b/config/common_base
index 39e6333..5fbac47 100644
--- a/config/common_base
+++ b/config/common_base
@@ -207,7 +207,6 @@ CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
#
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 84c35a0..77fa957 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -114,16 +114,6 @@ These options can be modified in the ``.config`` file.
adds additional run-time checks and debugging messages at the cost of
lower performance.
-- ``CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE`` (default **0**)
-
- Amount of data to be inlined during TX operations. Improves latency.
- Can improve PPS performance when PCI backpressure is detected and may be
- useful for scenarios involving heavy traffic on many queues.
-
- Since the additional software logic necessary to handle this mode can
- lower performance when there is no backpressure, it is not enabled by
- default.
-
- ``CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE`` (default **8**)
Maximum number of cached memory pools (MPs) per TX queue. Each MP from
diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
index 656a6e1..289c85e 100644
--- a/drivers/net/mlx5/Makefile
+++ b/drivers/net/mlx5/Makefile
@@ -86,10 +86,6 @@ else
CFLAGS += -DNDEBUG -UPEDANTIC
endif
-ifdef CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE
-CFLAGS += -DMLX5_PMD_MAX_INLINE=$(CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE)
-endif
-
ifdef CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE
CFLAGS += -DMLX5_PMD_TX_MP_CACHE=$(CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE)
endif
diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
index da1c90e..9a19835 100644
--- a/drivers/net/mlx5/mlx5_defs.h
+++ b/drivers/net/mlx5/mlx5_defs.h
@@ -54,11 +54,6 @@
/* RSS Indirection table size. */
#define RSS_INDIRECTION_TABLE_SIZE 256
-/* Maximum size for inline data. */
-#ifndef MLX5_PMD_MAX_INLINE
-#define MLX5_PMD_MAX_INLINE 0
-#endif
-
/*
* Maximum number of cached Memory Pools (MPs) per TX queue. Each RTE MP
* from which buffers are to be transmitted will have to be mapped by this
diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
index 07d95eb..4ba88ea 100644
--- a/drivers/net/mlx5/mlx5_rxtx.c
+++ b/drivers/net/mlx5/mlx5_rxtx.c
@@ -329,56 +329,33 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts,
uint16_t pkts_n)
rte_prefetch0((volatile void *)
(uintptr_t)buf_next_addr);
}
- /* Put packet into send queue. */
-#if MLX5_PMD_MAX_INLINE > 0
- if (length <= txq->max_inline) {
-#ifdef HAVE_VERBS_VLAN_INSERTION
- if (insert_vlan)
- err = txq->send_pending_inline_vlan
- (txq->qp,
- (void *)addr,
- length,
- send_flags,
- &buf->vlan_tci);
- else
-#endif /* HAVE_VERBS_VLAN_INSERTION */
- err = txq->send_pending_inline
- (txq->qp,
- (void *)addr,
- length,
- send_flags);
- } else
-#endif
- {
- /* Retrieve Memory Region key for this
- * memory pool. */
- lkey = txq_mp2mr(txq, txq_mb2mp(buf));
- if (unlikely(lkey == (uint32_t)-1)) {
- /* MR does not exist. */
- DEBUG("%p: unable to get MP <-> MR"
- " association", (void *)txq);
- /* Clean up TX element. */
- elt->buf = NULL;
- goto stop;
- }
+ /* Retrieve Memory Region key for this memory pool. */
+ lkey = txq_mp2mr(txq, txq_mb2mp(buf));
+ if (unlikely(lkey == (uint32_t)-1)) {
+ /* MR does not exist. */
+ DEBUG("%p: unable to get MP <-> MR"
+ " association", (void *)txq);
+ /* Clean up TX element. */
+ elt->buf = NULL;
+ goto stop;
+ }
#ifdef HAVE_VERBS_VLAN_INSERTION
- if (insert_vlan)
- err = txq->send_pending_vlan
- (txq->qp,
- addr,
- length,
- lkey,
- send_flags,
- &buf->vlan_tci);
- else
+ if (insert_vlan)
+ err = txq->send_pending_vlan
+ (txq->qp,
+ addr,
+ length,
+ lkey,
+ send_flags,
+ &buf->vlan_tci);
+ else
#endif /* HAVE_VERBS_VLAN_INSERTION */
- err = txq->send_pending
- (txq->qp,
- addr,
- length,
- lkey,
- send_flags);
- }
+ err = txq->send_pending
+ (txq->qp,
+ addr,
+ length,
+ lkey,
+ send_flags);
if (unlikely(err))
goto stop;
#ifdef MLX5_PMD_SOFT_COUNTERS
diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index 2e1f83b..3a353b0 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -240,19 +240,10 @@ struct txq {
#ifdef HAVE_VERBS_VLAN_INSERTION
int (*send_pending_vlan)();
#endif
-#if MLX5_PMD_MAX_INLINE > 0
- int (*send_pending_inline)();
-#ifdef HAVE_VERBS_VLAN_INSERTION
- int (*send_pending_inline_vlan)();
-#endif
-#endif
int (*send_flush)(struct ibv_qp *qp);
struct ibv_cq *cq; /* Completion Queue. */
struct ibv_qp *qp; /* Queue Pair. */
struct txq_elt (*elts)[]; /* TX elements. */
-#if MLX5_PMD_MAX_INLINE > 0
- uint32_t max_inline; /* Max inline send size <= MLX5_PMD_MAX_INLINE. */
-#endif
unsigned int elts_n; /* (*elts)[] length. */
unsigned int elts_head; /* Current index in (*elts)[]. */
unsigned int elts_tail; /* First element awaiting completion. */
diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
index 59974c5..75da65b 100644
--- a/drivers/net/mlx5/mlx5_txq.c
+++ b/drivers/net/mlx5/mlx5_txq.c
@@ -173,9 +173,6 @@ txq_cleanup(struct txq *txq)
DEBUG("cleaning up %p", (void *)txq);
txq_free_elts(txq);
txq->poll_cnt = NULL;
-#if MLX5_PMD_MAX_INLINE > 0
- txq->send_pending_inline = NULL;
-#endif
txq->send_flush = NULL;
if (txq->if_qp != NULL) {
assert(txq->priv != NULL);
@@ -305,9 +302,6 @@ txq_setup(struct rte_eth_dev *dev, struct txq *txq,
uint16_t desc,
desc),
/* Max number of scatter/gather elements in a WR. */
.max_send_sge = 1,
-#if MLX5_PMD_MAX_INLINE > 0
- .max_inline_data = MLX5_PMD_MAX_INLINE,
-#endif
},
.qp_type = IBV_QPT_RAW_PACKET,
/* Do *NOT* enable this, completions events are managed per
@@ -325,10 +319,6 @@ txq_setup(struct rte_eth_dev *dev, struct txq *txq,
uint16_t desc,
(void *)dev, strerror(ret));
goto error;
}
-#if MLX5_PMD_MAX_INLINE > 0
- /* ibv_create_qp() updates this value. */
- tmpl.max_inline = attr.init.cap.max_inline_data;
-#endif
attr.mod = (struct ibv_exp_qp_attr){
/* Move the QP to this state. */
.qp_state = IBV_QPS_INIT,
@@ -403,12 +393,6 @@ txq_setup(struct rte_eth_dev *dev, struct txq *txq,
uint16_t desc,
txq_cleanup(txq);
*txq = tmpl;
txq->poll_cnt = txq->if_cq->poll_cnt;
-#if MLX5_PMD_MAX_INLINE > 0
- txq->send_pending_inline = txq->if_qp->send_pending_inline;
-#ifdef HAVE_VERBS_VLAN_INSERTION
- txq->send_pending_inline_vlan = txq->if_qp->send_pending_inline_vlan;
-#endif
-#endif
txq->send_pending = txq->if_qp->send_pending;
#ifdef HAVE_VERBS_VLAN_INSERTION
txq->send_pending_vlan = txq->if_qp->send_pending_vlan;
--
2.1.4
