On Tue, Mar 22, 2016 at 09:38:55PM +0800, Ananyev, Konstantin wrote: > Hi, > > > -----Original Message----- > > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Zhe Tao > > Sent: Tuesday, March 22, 2016 1:14 PM > > To: dev at dpdk.org > > Cc: Tao, Zhe > > Subject: [dpdk-dev] [PATCH] i40e: fix ipv6 TSO issue for tx function > > > > Issue: > > when using the following CLI in testpmd to enable ipv6 TSO feature > > ============= > > set verbose 1 > > csum set ip hw 0 > > csum set udp hw 0 > > csum set tcp hw 0 > > csum set sctp hw 0 > > csum set outer-ip hw 0 > > csum parse_tunnel on 0 > > tso set 800 0 > > set fwd csum > > > > start > > ============= > > > > We will not get we want, the ipv6 packets sent out from IXIA can be > > received by > > i40e, but cannot forward to another port. > > The root cause is when HW doing the TSO offload for packets, it not only > > depends > > on the context descriptor to define the MSS and TSO payload size, it also > > need to know whether this packets is ipv4 or ipv6, ipv4 need the header > > csum, > > but ipv6 doesn't need the csum. We need to use the i40e_txd_enable_checksum > > to > > set the ipv6 type flag into the data descriptor when the packets are for > > ipv6 TSO. > > > > Fixes: e3f0151f (i40e: enable Tx checksum only for offloaded packets) > > > > Signed-off-by: Zhe Tao <zhe.tao at intel.com> > > --- > > drivers/net/i40e/i40e_rxtx.c | 9 ++++++++- > > 1 file changed, 8 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c > > index 1488f2f..ffd6dba 100644 > > --- a/drivers/net/i40e/i40e_rxtx.c > > +++ b/drivers/net/i40e/i40e_rxtx.c > > @@ -1545,6 +1545,7 @@ i40e_xmit_pkts(void *tx_queue, struct rte_mbuf > > **tx_pkts, uint16_t nb_pkts) > > uint16_t slen; > > uint64_t buf_dma_addr; > > union i40e_tx_offload tx_offload = {0}; > > + bool enable_checksum = 0; > > > > txq = tx_queue; > > sw_ring = txq->sw_ring; > > @@ -1620,7 +1621,13 @@ i40e_xmit_pkts(void *tx_queue, struct rte_mbuf > > **tx_pkts, uint16_t nb_pkts) > > > > /* Enable checksum offloading */ > > cd_tunneling_params = 0; > > - if (ol_flags & I40E_TX_CKSUM_OFFLOAD_MASK) { > > + /* Check whether need to do checksum or not */ > > + if ((ol_flags & I40E_TX_CKSUM_OFFLOAD_MASK) || > > + ((ol_flags & PKT_TX_IPV6) && (ol_flags & PKT_TX_TCP_SEG))) { > > + enable_checksum = 1; > > + } > > + > > + if (enable_checksum) { > > i40e_txd_enable_checksum(ol_flags, &td_cmd, &td_offset, > > tx_offload, &cd_tunneling_params); > > } > > > Wonder can't we just include PKT_TX_TCP_SEG into I40E_TX_CKSUM_OFFLOAD_MASK, > and keep i40e_xmit_pkts() unchanged? > Konstantin agreed with you, checked the code again, the logic for ipv4 TSO also has some problem, so should add PKT_TX_TCP_SEG flag for both ipv4&ipv6 TSO to the offload mask.
>