Modify ixgbe_check_mq_mode function,
when SRIOV is enabled, enable mq_mode
ETH_MQ_RX_VMDQ_DCB and ETH_MQ_TX_VMDQ_DCB.

Modify ixgbe_dcb_tx_hw_config function,
replace the struct ixgbe_hw parameter with a
struct rte_eth_dev parameter and handle SRIOV enabled.

Modify ixgbe_dev_mq_rx_configure function,
when SRIOV is enabled, enable mq_mode ETH_MQ_RX_VMDQ_DCB.

Modify ixgbe_configure_dcb function,
drop check on dev->data->nb_rx_queues.

Signed-off-by: Rahul R Shah <rahul.r.shah at intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger at intel.com>
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 11 ++++++-----
 drivers/net/ixgbe/ixgbe_rxtx.c   | 36 ++++++++++++++++++++++--------------
 2 files changed, 28 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 4ca5747..4d5ce83 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -1977,6 +1977,9 @@ ixgbe_check_mq_mode(struct rte_eth_dev *dev)
                /* check multi-queue mode */
                switch (dev_conf->rxmode.mq_mode) {
                case ETH_MQ_RX_VMDQ_DCB:
+                       PMD_INIT_LOG(INFO, "ETH_MQ_RX_VMDQ_DCB mode supported 
in SRIOV");
+                       dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_DCB;
+                       break;
                case ETH_MQ_RX_VMDQ_DCB_RSS:
                        /* DCB/RSS VMDQ in SRIOV mode, not implement yet */
                        PMD_INIT_LOG(ERR, "SRIOV active,"
@@ -2012,11 +2015,9 @@ ixgbe_check_mq_mode(struct rte_eth_dev *dev)

                switch (dev_conf->txmode.mq_mode) {
                case ETH_MQ_TX_VMDQ_DCB:
-                       /* DCB VMDQ in SRIOV mode, not implement yet */
-                       PMD_INIT_LOG(ERR, "SRIOV is active,"
-                                       " unsupported VMDQ mq_mode tx %d.",
-                                       dev_conf->txmode.mq_mode);
-                       return -EINVAL;
+                       PMD_INIT_LOG(INFO, "ETH_MQ_TX_VMDQ_DCB mode supported 
in SRIOV");
+                       dev->data->dev_conf.txmode.mq_mode = ETH_MQ_TX_VMDQ_DCB;
+                       break;
                default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE */
                        dev->data->dev_conf.txmode.mq_mode = 
ETH_MQ_TX_VMDQ_ONLY;
                        break;
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index 2ce8234..4c13ed2 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
  *   Copyright 2014 6WIND S.A.
  *   All rights reserved.
  *
@@ -3313,15 +3313,16 @@ ixgbe_vmdq_dcb_configure(struct rte_eth_dev *dev)

 /**
  * ixgbe_dcb_config_tx_hw_config - Configure general DCB TX parameters
- * @hw: pointer to hardware structure
+ * @dev: pointer to eth_dev structure
  * @dcb_config: pointer to ixgbe_dcb_config structure
  */
 static void
-ixgbe_dcb_tx_hw_config(struct ixgbe_hw *hw,
+ixgbe_dcb_tx_hw_config(struct rte_eth_dev *dev,
                       struct ixgbe_dcb_config *dcb_config)
 {
        uint32_t reg;
        uint32_t q;
+       struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);

        PMD_INIT_FUNC_TRACE();
        if (hw->mac.type != ixgbe_mac_82598EB) {
@@ -3339,11 +3340,17 @@ ixgbe_dcb_tx_hw_config(struct ixgbe_hw *hw,
                if (dcb_config->vt_mode)
                        reg |= IXGBE_MTQC_VT_ENA;
                IXGBE_WRITE_REG(hw, IXGBE_MTQC, reg);
-
-               /* Disable drop for all queues */
-               for (q = 0; q < 128; q++)
-                       IXGBE_WRITE_REG(hw, IXGBE_QDE,
-                               (IXGBE_QDE_WRITE | (q << IXGBE_QDE_IDX_SHIFT)));
+               if (RTE_ETH_DEV_SRIOV(dev).active == 0) {
+                       /* Disable drop for all queues in VMDQ mode*/
+                       for (q = 0; q < 128; q++)
+                               IXGBE_WRITE_REG(hw, IXGBE_QDE,
+                                               (IXGBE_QDE_WRITE | (q << 
IXGBE_QDE_IDX_SHIFT) | IXGBE_QDE_ENABLE));
+               } else {
+                       /* Enable drop for all queues in SRIOV mode */
+                       for (q = 0; q < 128; q++)
+                               IXGBE_WRITE_REG(hw, IXGBE_QDE,
+                                               (IXGBE_QDE_WRITE | (q << 
IXGBE_QDE_IDX_SHIFT)));
+               }

                /* Enable the Tx desc arbiter */
                reg = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
@@ -3378,7 +3385,7 @@ ixgbe_vmdq_dcb_hw_tx_config(struct rte_eth_dev *dev,
                        vmdq_tx_conf->nb_queue_pools == ETH_16_POOLS ? 0xFFFF : 
0xFFFFFFFF);

        /*Configure general DCB TX parameters*/
-       ixgbe_dcb_tx_hw_config(hw, dcb_config);
+       ixgbe_dcb_tx_hw_config(dev, dcb_config);
 }

 static void
@@ -3661,7 +3668,7 @@ ixgbe_dcb_hw_configure(struct rte_eth_dev *dev,
                /*get DCB TX configuration parameters from rte_eth_conf*/
                ixgbe_dcb_tx_config(dev, dcb_config);
                /*Configure general DCB TX parameters*/
-               ixgbe_dcb_tx_hw_config(hw, dcb_config);
+               ixgbe_dcb_tx_hw_config(dev, dcb_config);
                break;
        default:
                PMD_INIT_LOG(ERR, "Incorrect DCB TX mode configuration");
@@ -3810,7 +3817,7 @@ void ixgbe_configure_dcb(struct rte_eth_dev *dev)
            (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB_RSS))
                return;

-       if (dev->data->nb_rx_queues != ETH_DCB_NUM_QUEUES)
+       if (dev->data->nb_rx_queues > ETH_DCB_NUM_QUEUES)
                return;

        /** Configure DCB hardware **/
@@ -4082,12 +4089,13 @@ ixgbe_dev_mq_rx_configure(struct rte_eth_dev *dev)
                case ETH_MQ_RX_VMDQ_RSS:
                        ixgbe_config_vf_rss(dev);
                        break;
-
-               /* FIXME if support DCB/RSS together with VMDq & SRIOV */
                case ETH_MQ_RX_VMDQ_DCB:
+                       ixgbe_vmdq_dcb_configure(dev);
+                       break;
+               /* FIXME if support DCB/RSS together with VMDq & SRIOV */
                case ETH_MQ_RX_VMDQ_DCB_RSS:
                        PMD_INIT_LOG(ERR,
-                               "Could not support DCB with VMDq & SRIOV");
+                               "Could not support DCB/RSS with VMDq & SRIOV");
                        return -1;
                default:
                        ixgbe_config_vf_default(dev);
-- 
2.10.1

Reply via email to