In mac-vlan mode, MAC address mask is not supported by HW.
The MAC address mask should not be set in mac-vlan mode.
Remove this parameter from the CLI. Remove MAC address
from mask print too.
Fixes: 53b2bb9b7ea7 ("app/testpmd: new flow director commands")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch at intel.com>
---
app/test-pmd/cmdline.c | 5 +----
app/test-pmd/config.c | 13 ++++++-------
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 3 +--
3 files changed, 8 insertions(+), 13 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 6e95ca2..259090a 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -720,7 +720,7 @@ static void cmd_help_long_parsed(void *parsed_result,
" Set flow director IP mask.\n\n"
"flow_director_mask (port_id) mode MAC-VLAN"
- " vlan (vlan_value) mac (mac_value)\n"
+ " vlan (vlan_value)\n"
" Set flow director MAC-VLAN mask.\n\n"
"flow_director_mask (port_id) mode Tunnel"
@@ -9075,7 +9075,6 @@ cmd_flow_director_mask_parsed(void *parsed_result,
}
mask->vlan_tci_mask = res->vlan_mask;
- mask->mac_addr_byte_mask = res->mac_addr_byte_mask;
} else if (fdir_conf.mode == RTE_FDIR_MODE_PERFECT_TUNNEL) {
if (strcmp(res->mode_value, "Tunnel")) {
printf("Please set mode to Tunnel.\n");
@@ -9206,8 +9205,6 @@ cmdline_parse_inst_t cmd_set_flow_director_mac_vlan_mask
= {
(void *)&cmd_flow_director_mask_mode_mac_vlan,
(void *)&cmd_flow_director_mask_vlan,
(void *)&cmd_flow_director_mask_vlan_value,
- (void *)&cmd_flow_director_mask_mac,
- (void *)&cmd_flow_director_mask_mac_value,
NULL,
},
};
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 83bebfe..238c4fd 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2045,16 +2045,15 @@ set_qmap(portid_t port_id, uint8_t is_rx, uint16_t
queue_id, uint8_t map_value)
static inline void
print_fdir_mask(struct rte_eth_fdir_masks *mask)
{
- printf("\n vlan_tci: 0x%04x, ", mask->vlan_tci_mask);
+ printf("\n vlan_tci: 0x%04x", mask->vlan_tci_mask);
- if (fdir_conf.mode == RTE_FDIR_MODE_PERFECT_MAC_VLAN)
- printf("mac_addr: 0x%02x", mask->mac_addr_byte_mask);
- else if (fdir_conf.mode == RTE_FDIR_MODE_PERFECT_TUNNEL)
- printf("mac_addr: 0x%02x, tunnel_type: 0x%01x, tunnel_id:
0x%08x",
+ if (fdir_conf.mode == RTE_FDIR_MODE_PERFECT_TUNNEL)
+ printf(", mac_addr: 0x%02x, tunnel_type: 0x%01x,"
+ " tunnel_id: 0x%08x",
mask->mac_addr_byte_mask, mask->tunnel_type_mask,
mask->tunnel_id_mask);
- else {
- printf("src_ipv4: 0x%08x, dst_ipv4: 0x%08x,"
+ else if (fdir_conf.mode != RTE_FDIR_MODE_PERFECT_MAC_VLAN) {
+ printf(", src_ipv4: 0x%08x, dst_ipv4: 0x%08x,"
" src_port: 0x%04x, dst_port: 0x%04x",
mask->ipv4_mask.src_ip, mask->ipv4_mask.dst_ip,
mask->src_port_mask, mask->dst_port_mask);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index f87e0c2..ed04532 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1844,8 +1844,7 @@ Set flow director's input masks::
src_mask (ipv4_src) (ipv6_src) (src_port) \
dst_mask (ipv4_dst) (ipv6_dst) (dst_port)
- flow_director_mask (port_id) mode MAC-VLAN vlan (vlan_value) \
- mac (mac_value)
+ flow_director_mask (port_id) mode MAC-VLAN vlan (vlan_value)
flow_director_mask (port_id) mode Tunnel vlan (vlan_value) \
mac (mac_value) tunnel-type (tunnel_type_value) \
--
1.9.3
