From: "E. Scott Daniels" <dani...@research.att.com>
The final parameter to rte_pmd_ixgbe_set_vf_vlan_insert is uint8_t
and treated as a binary flag when it needs to be a uint16_t
and treated as a VLAN id. The data sheet (sect 8.2.3.27.13) describes
the right most 16 bits as the VLAN id that is to be inserted; the
16.11 code is accepting only a 1 or 0 thus effectively only
allowing the VLAN id 1 to be inserted (0 disables the insertion
setting).
This patch changes the final parm name to represent the data that
is being accepted (vlan_id), changes the type to permit all valid
VLAN ids, and validates the parameter based on the range of 0 to
4095. Corresponding changes to prototype and documentation in the
.h file.
Fixes: 49e248223e9f71 ("net/ixgbe: add API for VF management")
Signed-off-by: E. Scott Daniels <daniels at research.att.com>
---
drivers/net/ixgbe/ixgbe_ethdev.c | 8 ++++----
drivers/net/ixgbe/rte_pmd_ixgbe.h | 9 +++++----
2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 4ca5747..316af73 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -4727,7 +4727,7 @@ rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port,
uint16_t vf, uint8_t on)
}
int
-rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, uint8_t on)
+rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, uint16_t vlan_id)
{
struct ixgbe_hw *hw;
uint32_t ctrl;
@@ -4742,13 +4742,13 @@ rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t
vf, uint8_t on)
if (vf >= dev_info.max_vfs)
return -EINVAL;
- if (on > 1)
+ if (vlan_id > 4095)
return -EINVAL;
hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
ctrl = IXGBE_READ_REG(hw, IXGBE_VMVIR(vf));
- if (on) {
- ctrl = on;
+ if (vlan_id) {
+ ctrl = vlan_id;
ctrl |= IXGBE_VMVIR_VLANA_DEFAULT;
} else {
ctrl = 0;
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h
b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index 2fdf530..c2fb826 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -99,16 +99,17 @@ int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port,
uint16_t vf, uint8_t on);
* The port identifier of the Ethernet device.
* @param vf
* ID specifying VF.
- * @param on
- * 1 - Enable VF's vlan insert.
- * 0 - Disable VF's vlan insert
+ * @param vlan_id
+ * 0 - Disable VF's vlan insert.
+ * n - Enable; n is inserted as the vlan id.
*
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf,
+ uint16_t vlan_id);
/**
* Enable/Disable tx loopback
--
2.10.1
