This patch removes restrictions in bonded device library which prevent a
bonded device to be added to another bonded device.

Added link speed calculation for a bonding with fallowed rules:
 - BROADCAST - Minimal slaves link speed
 - ACTIVE_BACKUP - Current primary slave
 - ROUND_ROBIN, BALANCE, 8023AD, TLB, ALB - Sum of slaves link speeds

There's two limitations to create master bonding:

 - Total depth of nesting is limited to two levels,
 - 802.3ad mode is not supported if one or more slaves is a bond device,

---
v2 changes:
 - added dynamic link speed recalculation for a bonding

Signed-off-by: Tomasz Kulasek <tomaszx.kula...@intel.com>
---
 drivers/net/bonding/rte_eth_bond_api.c     | 63 ++++++++++++++++++++------
 drivers/net/bonding/rte_eth_bond_pmd.c     | 73 +++++++++++++++++++++++++++---
 drivers/net/bonding/rte_eth_bond_private.h |  7 ++-
 3 files changed, 123 insertions(+), 20 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_api.c 
b/drivers/net/bonding/rte_eth_bond_api.c
index 55d71d9..e1e7564 100644
--- a/drivers/net/bonding/rte_eth_bond_api.c
+++ b/drivers/net/bonding/rte_eth_bond_api.c
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -63,13 +63,45 @@
 }
 
 int
-valid_slave_port_id(uint8_t port_id)
+check_for_master_bonded_ethdev(const struct rte_eth_dev *eth_dev) {
+       int i;
+       struct bond_dev_private *internals;
+
+       if (check_for_bonded_ethdev(eth_dev) != 0)
+               return 0;
+
+       internals = eth_dev->data->dev_private;
+
+       /* Check if any of slave devices is a bonded device */
+       for (i = 0; i < internals->slave_count; i++)
+               if (valid_bonded_port_id(internals->slaves[i].port_id) == 0)
+                       return 1;
+
+       return 0;
+}
+
+int
+valid_slave_port_id(uint8_t port_id, uint8_t mode)
 {
        RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -1);
 
        /* Verify that port_id refers to a non bonded port */
-       if (check_for_bonded_ethdev(&rte_eth_devices[port_id]) == 0)
-               return -1;
+       if (check_for_bonded_ethdev(&rte_eth_devices[port_id]) == 0) {
+               if (mode == BONDING_MODE_8023AD) {
+                       RTE_BOND_LOG(ERR, "One or more slaves is a bond device,"
+                                       " there 802.3ad mode can not be"
+                                       " supported on this bond device.");
+                       return -1;
+               }
+
+               if (check_for_master_bonded_ethdev(&rte_eth_devices[port_id])) {
+                       RTE_BOND_LOG(ERR, "Too many levels of bonding");
+                       return -1;
+               }
+
+               /* Slave is in master bonding */
+               return 1;
+       }
 
        return 0;
 }
@@ -234,14 +266,19 @@
        struct bond_dev_private *internals;
        struct rte_eth_link link_props;
        struct rte_eth_dev_info dev_info;
-
-       if (valid_slave_port_id(slave_port_id) != 0)
-               return -1;
+       int status;
 
        bonded_eth_dev = &rte_eth_devices[bonded_port_id];
        internals = bonded_eth_dev->data->dev_private;
 
+       status = valid_slave_port_id(slave_port_id, internals->mode);
+
+       /* Slave is invalid */
+       if (status < 0)
+               return -1;
+
        slave_eth_dev = &rte_eth_devices[slave_port_id];
+
        if (slave_eth_dev->data->dev_flags & RTE_ETH_DEV_BONDED_SLAVE) {
                RTE_BOND_LOG(ERR, "Slave device is already a slave of a bonded 
device");
                return -1;
@@ -386,12 +423,12 @@
        struct rte_eth_dev *slave_eth_dev;
        int i, slave_idx;
 
-       if (valid_slave_port_id(slave_port_id) != 0)
-               return -1;
-
        bonded_eth_dev = &rte_eth_devices[bonded_port_id];
        internals = bonded_eth_dev->data->dev_private;
 
+       if (valid_slave_port_id(slave_port_id, internals->mode) < 0)
+               return -1;
+
        /* first remove from active slave list */
        slave_idx = find_slave_by_id(internals->active_slaves,
                internals->active_slave_count, slave_port_id);
@@ -512,11 +549,11 @@
        if (valid_bonded_port_id(bonded_port_id) != 0)
                return -1;
 
-       if (valid_slave_port_id(slave_port_id) != 0)
-               return -1;
-
        internals =  rte_eth_devices[bonded_port_id].data->dev_private;
 
+       if (valid_slave_port_id(slave_port_id, internals->mode) < 0)
+               return -1;
+
        internals->user_defined_primary_port = 1;
        internals->primary_port = slave_port_id;
 
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c 
b/drivers/net/bonding/rte_eth_bond_pmd.c
index a8d9780..73e1032 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -79,6 +79,50 @@
        return vlan_offset;
 }
 
+static uint32_t
+get_link_speed(struct rte_eth_dev *bonded_eth_dev)
+{
+       struct bond_dev_private *internals = bonded_eth_dev->data->dev_private;
+       int i;
+
+       struct rte_eth_link link_status;
+       uint32_t link_speed;
+
+       if (internals->active_slave_count < 1)
+               return 0;
+
+       switch (internals->mode) {
+       case BONDING_MODE_BROADCAST:
+               /* Minimal slaves link speed */
+               rte_eth_link_get(internals->active_slaves[0], &link_status);
+               link_speed = link_status.link_speed;
+               for (i = 1; i < internals->active_slave_count; i++) {
+                       rte_eth_link_get(internals->active_slaves[i], 
&link_status);
+                       if (link_status.link_speed < link_speed)
+                               link_speed = link_status.link_speed;
+               }
+               break;
+       case BONDING_MODE_ACTIVE_BACKUP:
+               /* Current primary slave */
+               rte_eth_link_get(internals->current_primary_port, &link_status);
+               link_speed = link_status.link_speed;
+               break;
+       case BONDING_MODE_ROUND_ROBIN:
+       case BONDING_MODE_BALANCE:
+       case BONDING_MODE_8023AD:
+       case BONDING_MODE_TLB:
+       case BONDING_MODE_ALB:
+       default:
+               /* Sum of slaves link speeds */
+               link_speed = 0;
+               for (i = 0; i < internals->active_slave_count; i++) {
+                       rte_eth_link_get(internals->active_slaves[i], 
&link_status);
+                       link_speed += link_status.link_speed;
+               }
+       }
+       return link_speed;
+}
+
 static uint16_t
 bond_ethdev_rx_burst(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 {
@@ -1139,9 +1183,10 @@ struct bwg_slave {
 
        if (slave_dev_link->link_status &&
                bonded_eth_dev->data->dev_started) {
-               bonded_dev_link->link_duplex = slave_dev_link->link_duplex;
-               bonded_dev_link->link_speed = slave_dev_link->link_speed;
-
+               internals->slave_link.link_duplex = slave_dev_link->link_duplex;
+               internals->slave_link.link_speed = slave_dev_link->link_speed;
+               memcpy(bonded_dev_link, &internals->slave_link,
+                               sizeof(struct rte_eth_link));
                internals->link_props_set = 1;
        }
 }
@@ -1153,6 +1198,8 @@ struct bwg_slave {
 
        memset(&(bonded_eth_dev->data->dev_link), 0,
                        sizeof(bonded_eth_dev->data->dev_link));
+       memset(&(internals->slave_link), 0,
+                       sizeof(bonded_eth_dev->data->dev_link));
 
        internals->link_props_set = 0;
 }
@@ -1292,6 +1339,12 @@ struct bwg_slave {
                eth_dev->rx_pkt_burst = bond_ethdev_rx_burst;
                break;
        case BONDING_MODE_8023AD:
+               if (check_for_master_bonded_ethdev(eth_dev) == 1) {
+                       RTE_BOND_LOG(ERR, "One or more slaves is a bond device,"
+                                       " there 802.3ad mode can not be"
+                                       " supported on this bond device.");
+                       return -1;
+               }
                if (bond_mode_8023ad_enable(eth_dev) != 0)
                        return -1;
 
@@ -1887,6 +1940,8 @@ struct bwg_slave {
                }
 
                bonded_eth_dev->data->dev_link.link_status = link_up;
+               bonded_eth_dev->data->dev_link.link_speed = get_link_speed(
+                               bonded_eth_dev);
        }
 
        return 0;
@@ -2009,6 +2064,7 @@ struct bwg_slave {
        int i, valid_slave = 0;
        uint8_t active_pos;
        uint8_t lsc_flag = 0;
+       uint8_t master_bonding;
 
        if (type != RTE_ETH_EVENT_INTR_LSC || param == NULL)
                return;
@@ -2058,9 +2114,11 @@ struct bwg_slave {
                        link_properties_set(bonded_eth_dev,
                                        &(slave_eth_dev->data->dev_link));
                } else {
-                       if (link_properties_valid(
-                               &bonded_eth_dev->data->dev_link, &link) != 0) {
-                               slave_eth_dev->data->dev_flags &=
+                       master_bonding = check_for_master_bonded_ethdev(
+                                       bonded_eth_dev);
+                       if ((master_bonding == 0) && link_properties_valid(
+                               &internals->slave_link, &link) != 0) {
+                                       slave_eth_dev->data->dev_flags &=
                                        (~RTE_ETH_DEV_BONDED_SLAVE);
                                RTE_LOG(ERR, PMD,
                                        "port %u invalid speed/duplex\n",
@@ -2128,6 +2186,9 @@ struct bwg_slave {
                                                RTE_ETH_EVENT_INTR_LSC, NULL);
                }
        }
+
+       bonded_eth_dev->data->dev_link.link_speed = get_link_speed(
+                       bonded_eth_dev);
 }
 
 static int
diff --git a/drivers/net/bonding/rte_eth_bond_private.h 
b/drivers/net/bonding/rte_eth_bond_private.h
index 50d908d..e27ceb8 100644
--- a/drivers/net/bonding/rte_eth_bond_private.h
+++ b/drivers/net/bonding/rte_eth_bond_private.h
@@ -135,6 +135,8 @@ struct bond_dev_private {
        uint8_t link_props_set;
        /**< flag to denote if the link properties are set */
 
+       struct rte_eth_link slave_link;
+
        uint8_t link_status_polling_enabled;
        uint32_t link_status_polling_interval_ms;
 
@@ -184,6 +186,9 @@ struct bond_dev_private {
 int
 check_for_bonded_ethdev(const struct rte_eth_dev *eth_dev);
 
+int
+check_for_master_bonded_ethdev(const struct rte_eth_dev *eth_dev);
+
 /* Search given slave array to find position of given id.
  * Return slave pos or slaves_count if not found. */
 static inline uint8_t
@@ -205,7 +210,7 @@ struct bond_dev_private {
 valid_bonded_port_id(uint8_t port_id);
 
 int
-valid_slave_port_id(uint8_t port_id);
+valid_slave_port_id(uint8_t port_id, uint8_t mode);
 
 void
 deactivate_slave(struct rte_eth_dev *eth_dev, uint8_t port_id);
-- 
1.9.1

Reply via email to