Hi Ferruh, > -----Original Message----- > From: Yigit, Ferruh > Sent: Friday, September 15, 2017 2:33 AM > To: Hu, Jiayu <[email protected]>; [email protected] > Cc: Ananyev, Konstantin <[email protected]>; Kavanagh, Mark > B <[email protected]>; Tan, Jianfeng <[email protected]> > Subject: Re: [dpdk-dev] [PATCH v3 5/5] app/testpmd: enable TCP/IPv4, > VxLAN and GRE GSO > > On 9/12/2017 3:43 AM, Jiayu Hu wrote: > > This patch adds GSO support to the csum forwarding engine. Oversized > > packets transmitted over a GSO-enabled port will undergo segmentation > > (with the exception of packet-types unsupported by the GSO library). > > GSO support is disabled by default. > > > > GSO support may be toggled on a per-port basis, using the command: > > > > "set port <port_id> gso on|off" > > > > The maximum packet length (including the packet header and payload) for > > GSO segments may be set with the command: > > > > "set gso segsz <length>" > > > > Show GSO configuration for a given port with the command: > > > > "show port <port_id> gso" > > > > Signed-off-by: Jiayu Hu <[email protected]> > > Signed-off-by: Mark Kavanagh <[email protected]> > > --- > > app/test-pmd/cmdline.c | 178 > ++++++++++++++++++++++++++++++++++++++++++++++++ > > app/test-pmd/config.c | 24 +++++++ > > app/test-pmd/csumonly.c | 102 +++++++++++++++++++++++++-- > > app/test-pmd/testpmd.c | 16 +++++ > > app/test-pmd/testpmd.h | 10 +++ > Can you please update tespmd document (testpmd_funcs.rst) with new > commands.
Thanks, I will update it sooner. Jiayu > > <...>
