From: Alok Makhariya <alok.makhar...@nxp.com>
Enable out of place buffer test cases in nxp dpaa2_sec
Signed-off-by: Alok Makhariya <alok.makhar...@nxp.com>
---
drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 42 +++++++++++++++++++++++------
test/test/test_cryptodev.c | 6 +++++
test/test/test_cryptodev_aes_test_vectors.h | 12 ++++++---
test/test/test_cryptodev_des_test_vectors.h | 6 +++--
4 files changed, 52 insertions(+), 14 deletions(-)
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index 62b9203..d466979 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -90,11 +90,17 @@ build_authenc_gcm_fd(dpaa2_sec_session *sess,
uint32_t auth_only_len = sess->ext_params.aead_ctxt.auth_only_len;
int icv_len = sess->digest_length, retval;
uint8_t *old_icv;
+ struct rte_mbuf *dst;
uint8_t *IV_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
sess->iv.offset);
PMD_INIT_FUNC_TRACE();
+ if (sym_op->m_dst)
+ dst = sym_op->m_dst;
+ else
+ dst = sym_op->m_src;
+
/* TODO we are using the first FLE entry to store Mbuf and session ctxt.
* Currently we donot know which FLE has the mbuf stored.
* So while retreiving we can go back 1 FLE from the FD -ADDR
@@ -155,9 +161,9 @@ build_authenc_gcm_fd(dpaa2_sec_session *sess,
DPAA2_SET_FLE_SG_EXT(fle);
/* Configure Output SGE for Encap/Decap */
- DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
+ DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(dst));
DPAA2_SET_FLE_OFFSET(sge, sym_op->aead.data.offset +
- sym_op->m_src->data_off - auth_only_len);
+ dst->data_off - auth_only_len);
sge->length = sym_op->aead.data.length + auth_only_len;
if (sess->dir == DIR_ENC) {
@@ -235,9 +241,15 @@ build_authenc_fd(dpaa2_sec_session *sess,
uint8_t *old_icv;
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
sess->iv.offset);
+ struct rte_mbuf *dst;
PMD_INIT_FUNC_TRACE();
+ if (sym_op->m_dst)
+ dst = sym_op->m_dst;
+ else
+ dst = sym_op->m_src;
+
/* we are using the first FLE entry to store Mbuf.
* Currently we donot know which FLE has the mbuf stored.
* So while retreiving we can go back 1 FLE from the FD -ADDR
@@ -300,9 +312,9 @@ build_authenc_fd(dpaa2_sec_session *sess,
DPAA2_SET_FLE_SG_EXT(fle);
/* Configure Output SGE for Encap/Decap */
- DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
+ DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(dst));
DPAA2_SET_FLE_OFFSET(sge, sym_op->cipher.data.offset +
- sym_op->m_src->data_off);
+ dst->data_off);
sge->length = sym_op->cipher.data.length;
if (sess->dir == DIR_ENC) {
@@ -456,9 +468,15 @@ build_cipher_fd(dpaa2_sec_session *sess, struct
rte_crypto_op *op,
struct ctxt_priv *priv = sess->ctxt;
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
sess->iv.offset);
+ struct rte_mbuf *dst;
PMD_INIT_FUNC_TRACE();
+ if (sym_op->m_dst)
+ dst = sym_op->m_dst;
+ else
+ dst = sym_op->m_src;
+
retval = rte_mempool_get(priv->fle_pool, (void **)(&fle));
if (retval) {
RTE_LOG(ERR, PMD, "Memory alloc failed for SGE\n");
@@ -503,9 +521,9 @@ build_cipher_fd(dpaa2_sec_session *sess, struct
rte_crypto_op *op,
sess->iv.length,
sym_op->m_src->data_off);
- DPAA2_SET_FLE_ADDR(fle, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
+ DPAA2_SET_FLE_ADDR(fle, DPAA2_MBUF_VADDR_TO_IOVA(dst));
DPAA2_SET_FLE_OFFSET(fle, sym_op->cipher.data.offset +
- sym_op->m_src->data_off);
+ dst->data_off);
fle->length = sym_op->cipher.data.length + sess->iv.length;
@@ -657,6 +675,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd)
struct qbman_fle *fle;
struct rte_crypto_op *op;
struct ctxt_priv *priv;
+ struct rte_mbuf *dst, *src;
fle = (struct qbman_fle *)DPAA2_IOVA_TO_VADDR(DPAA2_GET_FD_ADDR(fd));
@@ -679,10 +698,17 @@ sec_fd_to_mbuf(const struct qbman_fd *fd)
DPAA2_GET_FLE_ADDR((fle - 1)));
/* Prefeth op */
- rte_prefetch0(op->sym->m_src);
+ src = op->sym->m_src;
+ rte_prefetch0(src);
+
+ if (op->sym->m_dst) {
+ dst = op->sym->m_dst;
+ rte_prefetch0(dst);
+ } else
+ dst = src;
PMD_RX_LOG(DEBUG, "mbuf %p BMAN buf addr %p",
- (void *)op->sym->m_src, op->sym->m_src->buf_addr);
+ (void *)dst, dst->buf_addr);
PMD_RX_LOG(DEBUG, "fdaddr =%p bpid =%d meta =%d off =%d, len =%d",
(void *)DPAA2_GET_FD_ADDR(fd),
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index df84430..f889ecd 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -8837,6 +8837,12 @@ static struct unit_test_suite
cryptodev_openssl_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown,
auth_decryption_AES128CBC_HMAC_SHA1_fail_tag_corrupt),
+ /** Out of place tests */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_encryption_oop),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_mb_AES_GCM_authenticated_decryption_oop),
+
TEST_CASES_END() /**< NULL terminate unit test array */
}
};
diff --git a/test/test/test_cryptodev_aes_test_vectors.h
b/test/test/test_cryptodev_aes_test_vectors.h
index 0c7e48f..32c5deb 100644
--- a/test/test/test_cryptodev_aes_test_vectors.h
+++ b/test/test/test_cryptodev_aes_test_vectors.h
@@ -1431,7 +1431,8 @@ static const struct blockcipher_test_case
aes_chain_test_cases[] = {
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
@@ -1441,7 +1442,8 @@ static const struct blockcipher_test_case
aes_chain_test_cases[] = {
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
},
{
.test_descr = "AES-128-CBC HMAC-SHA224 Encryption Digest",
@@ -1591,7 +1593,8 @@ static const struct blockcipher_test_case
aes_cipheronly_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
},
{
.test_descr = "AES-256-CBC OOP Decryption",
@@ -1599,7 +1602,8 @@ static const struct blockcipher_test_case
aes_cipheronly_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
},
{
.test_descr = "AES-128-CTR Encryption",
diff --git a/test/test/test_cryptodev_des_test_vectors.h
b/test/test/test_cryptodev_des_test_vectors.h
index ebf8869..e4efd23 100644
--- a/test/test/test_cryptodev_des_test_vectors.h
+++ b/test/test/test_cryptodev_des_test_vectors.h
@@ -1181,7 +1181,8 @@ static const struct blockcipher_test_case
triple_des_chain_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
},
{
.test_descr = "3DES-128-CBC HMAC-SHA1 Decryption Digest"
@@ -1190,7 +1191,8 @@ static const struct blockcipher_test_case
triple_des_chain_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
},
{
.test_descr = "3DES-128-CBC HMAC-SHA1 Encryption Digest"
--
2.9.3
