Hi Jerin, Thanks for the review, will make the chages required and will send out a v2.
Pavan. On Sun, Dec 10, 2017 at 01:58:08PM +0530, Jerin Jacob wrote: > -----Original Message----- > > Date: Wed, 18 Oct 2017 18:09:00 +0530 > > From: Pavan Nikhilesh <[email protected]> > > To: [email protected], [email protected], > > [email protected], [email protected], [email protected], > > [email protected], [email protected], > > [email protected] > > Cc: [email protected], Pavan Nikhilesh <[email protected]> > > Subject: [PATCH 0/8] app/eventdev: add event eth Rx adapter support > > X-Mailer: git-send-email 2.7.4 > > > > The eventdev application uses producer lcores to inject packets as events > > into the event device. This approach is suitable for doing synthetic > > performance benchmarks. In most real-world scenarios the packets are > > received by an Ethernet device. > > > > The Event Ethernet Rx Adapter library enables packet transfer between > > ethernet dev and event dev transparently. This patch series adds an option > > '--prod_type_ethdev' to configure the attached Ethernet devices as Rx > > adapters > > and use them as producers instead of using synthetic producer cores. Also, > > this > > is an RX only case. > > > > The application has been verified on both sw and hw event devices using the > > command: > > > > ./build/app/dpdk-test-eventdev -c 0xfffff1 -s 0xf0000 --vdev="event_*" > > -- --wlcores 12 --test perf_queue --verbose 20 --stlist=a > > --prod_type_ethdev > > Please rebase to latest next-eventdev tree and fix following check patch > warning. > > ERROR:SWITCH_CASE_INDENT_LEVEL: switch and case should be at the same > indent > #154: FILE: app/test-eventdev/evt_options.h:284: > + switch (opt->prod_type) { > + default: > + case EVT_PROD_TYPE_SYNT: > [...] > + case EVT_PROD_TYPE_ETH_RX_ADPTR: > > > > > Pavan Nikhilesh (8): > > app/eventdev: add ethernet device producer option > > app/eventdev: modify app setup to support ethdev > > app/eventdev: add pktmbuf pool for ethdev > > app/eventdev: add ethernet device setup helpers > > app/eventdev: add ethernet device tear down > > app/eventdev: add event Rx adapter setup > > app/eventdev: add service core configuration > > doc: update app eventdev options > > > > app/test-eventdev/evt_common.h | 41 +++--- > > app/test-eventdev/evt_options.c | 11 ++ > > app/test-eventdev/evt_options.h | 29 ++++ > > app/test-eventdev/test_perf_atq.c | 32 +++-- > > app/test-eventdev/test_perf_common.c | 269 > > ++++++++++++++++++++++++++++++----- > > app/test-eventdev/test_perf_common.h | 4 + > > app/test-eventdev/test_perf_queue.c | 35 +++-- > > doc/guides/tools/testeventdev.rst | 15 ++ > > 8 files changed, 361 insertions(+), 75 deletions(-) > > > > -- > > 2.7.4 > >
