Hi Jerin, > -----Original Message----- > From: Jerin Jacob [mailto:jerin.ja...@caviumnetworks.com] > Sent: Friday, December 15, 2017 12:06 > To: Herbert Guan <herbert.g...@arm.com> > Cc: Jianbo Liu <jianbo....@arm.com>; dev@dpdk.org > Subject: Re: [PATCH] arch/arm: optimization for memcpy on AArch64 > > -----Original Message----- > > Date: Sun, 3 Dec 2017 12:37:30 +0000 > > From: Herbert Guan <herbert.g...@arm.com> > > To: Jerin Jacob <jerin.ja...@caviumnetworks.com> > > CC: Jianbo Liu <jianbo....@arm.com>, "dev@dpdk.org" <dev@dpdk.org> > > Subject: RE: [PATCH] arch/arm: optimization for memcpy on AArch64 > > > > Jerin, > > Hi Herbert, > > > > > Thanks a lot for your review and comments. Please find my comments > below inline. > > > > Best regards, > > Herbert > > > > > -----Original Message----- > > > From: Jerin Jacob [mailto:jerin.ja...@caviumnetworks.com] > > > Sent: Wednesday, November 29, 2017 20:32 > > > To: Herbert Guan <herbert.g...@arm.com> > > > Cc: Jianbo Liu <jianbo....@arm.com>; dev@dpdk.org > > > Subject: Re: [PATCH] arch/arm: optimization for memcpy on AArch64 > > > > > > -----Original Message----- > > > > Date: Mon, 27 Nov 2017 15:49:45 +0800 > > > > From: Herbert Guan <herbert.g...@arm.com> > > > > To: jerin.ja...@caviumnetworks.com, jianbo....@arm.com, > dev@dpdk.org > > > > CC: Herbert Guan <herbert.g...@arm.com> > > > > Subject: [PATCH] arch/arm: optimization for memcpy on AArch64 > > > > X-Mailer: git-send-email 1.8.3.1 > > > > + > > > > +/************************************** > > > > + * Beginning of customization section > > > > +**************************************/ > > > > +#define ALIGNMENT_MASK 0x0F > > > > +#ifndef RTE_ARCH_ARM64_MEMCPY_STRICT_ALIGN > > > > +// Only src unalignment will be treaed as unaligned copy > > > > > > C++ style comments. It may generate check patch errors. > > > > I'll change it to use C style comment in the version 2. > > > > > > > > > +#define IS_UNALIGNED_COPY(dst, src) ((uintptr_t)(dst) & > > > > +ALIGNMENT_MASK) #else // Both dst and src unalignment will be > treated > > > > +as unaligned copy #define IS_UNALIGNED_COPY(dst, src) \ > > > > +(((uintptr_t)(dst) | (uintptr_t)(src)) & ALIGNMENT_MASK) > > > #endif > > > > + > > > > + > > > > +// If copy size is larger than threshold, memcpy() will be used. > > > > +// Run "memcpy_perf_autotest" to determine the proper threshold. > > > > +#define ALIGNED_THRESHOLD ((size_t)(0xffffffff)) > > > > +#define UNALIGNED_THRESHOLD ((size_t)(0xffffffff)) > > > > > > Do you see any case where this threshold is useful. > > > > Yes, on some platforms, and/or with some glibc version, the glibc memcpy > has better performance in larger size (e.g., >512, >4096...). So developers > should run unit test to find the best threshold. The default value of > 0xffffffff > should be modified with evaluated values. > > OK > > > > > > > > > > + > > > > +static inline void *__attribute__ ((__always_inline__))i > > use __rte_always_inline
Applied in V3 patch. > > > > > +rte_memcpy(void *restrict dst, const void *restrict src, size_t n) > > > > +{ > > > > +if (n < 16) { > > > > +rte_memcpy_lt16((uint8_t *)dst, (const uint8_t *)src, n); > > > > +return dst; > > > > +} > > > > +if (n < 64) { > > > > +rte_memcpy_ge16_lt64((uint8_t *)dst, (const uint8_t *)src, > > > n); > > > > +return dst; > > > > +} > > > > > > Unfortunately we have 128B cache arm64 implementation too. Could you > > > please take care that based on RTE_CACHE_LINE_SIZE > > > > > > > Here the value of '64' is not the cache line size. But for the reason that > prefetch itself will cost some cycles, it's not worthwhile to do prefetch for > small size (e.g. < 64 bytes) copy. Per my test, prefetching for small size > copy > will actually lower the performance. > > But > I think, '64' is a function of cache size. ie. Any reason why we haven't used > rte_memcpy_ge16_lt128()/rte_memcpy_ge128 pair instead of > rte_memcpy_ge16_lt64//rte_memcpy_ge64 pair? > I think, if you can add one more conditional compilation to choose between > rte_memcpy_ge16_lt128()/rte_memcpy_ge128 vs > rte_memcpy_ge16_lt64//rte_memcpy_ge64, > will address the all arm64 variants supported in current DPDK. > The logic for 128B cache is implemented as you've suggested, and has been added in V3 patch. > > > > In the other hand, I can only find one 128B cache line aarch64 machine here. > And it do exist some specific optimization for this machine. Not sure if > it'll be > beneficial for other 128B cache machines or not. I prefer not to put it in > this > patch but in a later standalone specific patch for 128B cache machines. > > > > > > +__builtin_prefetch(src, 0, 0); // rte_prefetch_non_temporal(src); > > > > +__builtin_prefetch(dst, 1, 0); // * unchanged * > > # Why only once __builtin_prefetch used? Why not invoke in > rte_memcpy_ge64 loop > # Does it make sense to prefetch src + 64/128 * n Prefetch is only necessary once at the beginning. CPU will do auto incremental prefetch when the continuous memory access starts. It's not necessary to do prefetch in the loop. In fact doing it in loop will actually break CPU's HW prefetch and degrade the performance. IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.