Hi, Tonghao Thanks for your patch. It looks that same change can be applied to ixgbe_dev_interrupt_action( ) and ixgbe_dev_interrupt_delayed_handler( ). Anyway, you can test all these changes with example/l3fwd-power. -Wei
> -----Original Message----- > From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Xing, Beilei > Sent: Thursday, January 11, 2018 3:06 PM > To: Tonghao Zhang <xiangxia.m....@gmail.com>; dev@dpdk.org > Subject: Re: [dpdk-dev] [PATCH 4/5] net/ixgbevf: add check for > rte_intr_enable. > > > > > -----Original Message----- > > From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Tonghao Zhang > > Sent: Friday, January 5, 2018 10:11 PM > > To: dev@dpdk.org > > Cc: Tonghao Zhang <xiangxia.m....@gmail.com> > > Subject: [dpdk-dev] [PATCH 4/5] net/ixgbevf: add check for > rte_intr_enable. > > The patch is not only for ixgbevf, but also for ixgbe, right? > so how about changing the title with net/ixgbe started? > > > When we bind the ixgbevf to vfio and call the > > rte_eth_dev_rx_intr_enable and rte_eth_dev_rx_intr_disable frequently, > > the interrupt setting > > (msi_set_mask_bit) will take more CPU as show below. rte_intr_enable > > call the ioctl to map the fd to interrupts frequently. > > > > perf top: > > 5.45% [kernel] [k] msi_set_mask_bit > > > > It is unnecessary to call the rte_intr_enable in > > ixgbe_dev_rx_queue_intr_enable. because the fds has been mapped to > > interrupt and not unmapped in ixgbe_dev_rx_queue_intr_disable. > > > > This patch add checks for using VFIO. With the patch, > > msi_set_mask_bit is not listed in perl any more. Any suggestion will be > welcome. > > > > Signed-off-by: Tonghao Zhang <xiangxia.m....@gmail.com> > > --- > > drivers/net/ixgbe/ixgbe_ethdev.c | 9 +++++++-- > > 1 file changed, 7 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c > > b/drivers/net/ixgbe/ixgbe_ethdev.c > > index e929235..79e4097 100644 > > --- a/drivers/net/ixgbe/ixgbe_ethdev.c > > +++ b/drivers/net/ixgbe/ixgbe_ethdev.c > > @@ -5610,7 +5610,9 @@ static void ixgbevf_set_vfta_all(struct > > rte_eth_dev *dev, bool on) > > RTE_SET_USED(queue_id); > > IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, intr->mask); > > > > - rte_intr_enable(intr_handle); > > + if (intr_handle->type == RTE_INTR_HANDLE_UIO || > > + intr_handle->type == RTE_INTR_HANDLE_UIO_INTX) > > + rte_intr_enable(intr_handle); > > For igb_uio, did you check if it's necessary to call rte_intr_enable every > time? > Since rte interrupt is not disabled during ixgbevf_dev_rx_queue_intr_disable. > > > > > return 0; > > } > > @@ -5659,7 +5661,10 @@ static void ixgbevf_set_vfta_all(struct > > rte_eth_dev *dev, bool on) > > mask &= (1 << (queue_id - 32)); > > IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask); > > } > > - rte_intr_enable(intr_handle); > > + > > + if (intr_handle->type == RTE_INTR_HANDLE_UIO || > > + intr_handle->type == RTE_INTR_HANDLE_UIO_INTX) > > + rte_intr_enable(intr_handle); > > The same comment as above. > > > > > return 0; > > } > > -- > > 1.8.3.1