The hw flags are not read correctly: the defines
RX_PKT_CMPL_FLAGS_ITYPE_* are not bits but values, so the should not be
tested with if (value & X) but with if ((value & MASK) == X).
This was resulting in a wrong packet type.
For instance, an IPv4/ICMP packet was returning a value of 7 for
the layer 4, which is undefined.
This patch rework the way packet types are processed, to ensure
that only valid packet types will be advertised.
Fixes: 3d2a6644eb05 ("net/bnxt: support getting ptypes")
Cc: sta...@dpdk.org
Signed-off-by: Olivier Matz <olivier.m...@6wind.com>
---
drivers/net/bnxt/bnxt_rxr.c | 75 ++++++++++++++++++++++++++++-----------------
1 file changed, 47 insertions(+), 28 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
index 9b88a64bf..2b4044a83 100644
--- a/drivers/net/bnxt/bnxt_rxr.c
+++ b/drivers/net/bnxt/bnxt_rxr.c
@@ -338,41 +338,60 @@ static inline struct rte_mbuf *bnxt_tpa_end(
static uint32_t
bnxt_parse_pkt_type(struct rx_pkt_cmpl *rxcmp, struct rx_pkt_cmpl_hi *rxcmp1)
{
- uint32_t pkt_type = 0;
- uint32_t t_ipcs = 0, ip = 0, ip6 = 0;
- uint32_t tcp = 0, udp = 0, icmp = 0;
- uint32_t vlan = 0;
+ uint32_t l3, pkt_type = 0;
+ uint32_t t_ipcs = 0, ip6 = 0, vlan = 0;
+ uint32_t flags_type;
vlan = !!(rxcmp1->flags2 &
rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN));
+ pkt_type |= vlan ? RTE_PTYPE_L2_ETHER_VLAN : RTE_PTYPE_L2_ETHER;
+
t_ipcs = !!(rxcmp1->flags2 &
rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC));
ip6 = !!(rxcmp1->flags2 &
rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_IP_TYPE));
- icmp = !!(rxcmp->flags_type &
- rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_ICMP));
- tcp = !!(rxcmp->flags_type &
- rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_TCP));
- udp = !!(rxcmp->flags_type &
- rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_UDP));
- ip = !!(rxcmp->flags_type &
- rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_IP));
-
- pkt_type |= ((ip || tcp || udp || icmp) && !t_ipcs && !ip6) ?
- RTE_PTYPE_L3_IPV4_EXT_UNKNOWN : 0;
- pkt_type |= ((ip || tcp || udp || icmp) && !t_ipcs && ip6) ?
- RTE_PTYPE_L3_IPV6_EXT_UNKNOWN : 0;
- pkt_type |= (!t_ipcs && icmp) ? RTE_PTYPE_L4_ICMP : 0;
- pkt_type |= (!t_ipcs && udp) ? RTE_PTYPE_L4_UDP : 0;
- pkt_type |= (!t_ipcs && tcp) ? RTE_PTYPE_L4_TCP : 0;
- pkt_type |= ((ip || tcp || udp || icmp) && t_ipcs && !ip6) ?
- RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN : 0;
- pkt_type |= ((ip || tcp || udp || icmp) && t_ipcs && ip6) ?
- RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN : 0;
- pkt_type |= (t_ipcs && icmp) ? RTE_PTYPE_INNER_L4_ICMP : 0;
- pkt_type |= (t_ipcs && udp) ? RTE_PTYPE_INNER_L4_UDP : 0;
- pkt_type |= (t_ipcs && tcp) ? RTE_PTYPE_INNER_L4_TCP : 0;
- pkt_type |= vlan ? RTE_PTYPE_L2_ETHER_VLAN : 0;
+
+ flags_type = rxcmp->flags_type &
+ rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS_ITYPE_MASK);
+
+ if (!t_ipcs && !ip6)
+ l3 = RTE_PTYPE_L3_IPV4_EXT_UNKNOWN;
+ else if (!t_ipcs && ip6)
+ l3 = RTE_PTYPE_L3_IPV6_EXT_UNKNOWN;
+ else if (t_ipcs && !ip6)
+ l3 = RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN;
+ else
+ l3 = RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN;
+
+ switch (flags_type) {
+ case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_ICMP):
+ if (!t_ipcs)
+ pkt_type |= l3 | RTE_PTYPE_L4_ICMP;
+ else
+ pkt_type |= l3 | RTE_PTYPE_INNER_L4_ICMP;
+ break;
+
+ case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_TCP):
+ if (!t_ipcs)
+ pkt_type |= l3 | RTE_PTYPE_L4_TCP;
+ else
+ pkt_type |= l3 | RTE_PTYPE_INNER_L4_TCP;
+ break;
+
+ case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_UDP):
+ if (!t_ipcs)
+ pkt_type |= l3 | RTE_PTYPE_L4_UDP;
+ else
+ pkt_type |= l3 | RTE_PTYPE_INNER_L4_UDP;
+ break;
+
+ case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_IP):
+ if (!t_ipcs)
+ pkt_type |= l3 | RTE_PTYPE_L4_ICMP;
+ else
+ pkt_type |= l3 | RTE_PTYPE_INNER_L4_ICMP;
+ break;
+ }
return pkt_type;
}
--
2.11.0
