14/02/2018 16:00, Gaëtan Rivet:
> On Wed, Feb 14, 2018 at 02:47:26PM +0000, Matan Azrad wrote:
> > Fail-safe dev_start() operation can be called by both the application
> > and the hot-plug alarm mechanism.
> >
> > The installation of Rx interrupt are triggered from dev_start() in any
> > time it is called while actually the Rx interrupt should be installed
> > only by the application calls.
> >
> > So, each plug-in event causes reinstallation which causes memory leak
> > and spoils the fail-safe Rx interrupt mechanism.
> >
> > Trigger the Rx interrupt installation only when it does not exist.
> >
> > Fixes: 9e0360aebf23 ("net/failsafe: register as Rx interrupt mode")
> >
> > Signed-off-by: Matan Azrad <ma...@mellanox.com>
>
> Acked-by: Gaetan Rivet <gaetan.ri...@6wind.com>
Applied, thanks
