Thought I had attached it but hopefully you see it this time Rohit
From: Courage Angeh <couragean...@gmail.com> Sent: Wednesday, December 18, 2019 4:12 PM To: Dev <dev@fineract.apache.org> Subject: Re: help jump starting? I don't know If it's just me but I didn't find a file attached to the email you just forwarded Juhan. Please, can you check again? On Wed, Dec 18, 2019 at 4:41 AM Juhan Aasaru <aas...@gmail.com<mailto:aas...@gmail.com>> wrote: H! Rohit only sent the log file to me. I will forward it to the list now. Juhan Kontakt Rohit Jain (<rohit.j...@esgyn.com<mailto:rohit.j...@esgyn.com>>) kirjutas kuupäeval T, 17. detsember 2019 kell 04:13: Juhan, Thanks for that! I realized I had made a very foolish mistake in cutting and pasting from your instructions into the application-common.properties file. Since it said “Open newly generated … file .. and add to the end of the file:” I did not pay attention to what the rest said since it all looked alike and copied and pasted the whole thing including the section “#Keep the values you created” before the “#add following values”. I would suggest putting the keep the values you created section before that sentence, saying that the Generate RSA keys step will create the following in the file. And then follow that with the “Open newly generated …file …” and “#add following values”. However, while I got beyond the RSA errors I encountered new ones ☹. See attached. Rohit From: Juhan Aasaru <aas...@gmail.com<mailto:aas...@gmail.com>> Sent: Sunday, December 15, 2019 11:59 AM To: Rohit Jain <rohit.j...@esgyn.com<mailto:rohit.j...@esgyn.com>> Subject: Re: help jump starting? External Hi Rohit! If you open the class SystemRsaKeyProvider (in Intellij choose Navigate -> Class -> type in "SystemRsaKeyProvider") and look into what the class is doing then you see that init method tries to convert two strings into BigInteger-s: systemPublicKeyMod which is read in from "system.publicKey.modulus" and systemPublicKeyExp which is read in from "system.publicKey.exponent" Since you get NumberFormatException then one of these values is not a number. Open application-common.properties where these values are defined and make sure that you don't have any problems with linefeeds or non-numbers there. You can also set a a breakpoint to init method and instead of clicking Run you could click Debug in IntelliJ. And then you should be able to examine the values before the error arises. If you don't find any problems email me your file application-common.properties, maybe I could spot it. Good luck! Juhan Kontakt Rohit Jain (<rohit.j...@esgyn.com<mailto:rohit.j...@esgyn.com>>) kirjutas kuupäeval R, 13. detsember 2019 kell 23:51: Juhan, I followed the instructions and made good progress until I tried to Run the ProvisionerApplication. I am running on Windows 10. I usually use Eclipse but I installed IntelliJ so that I can follow your instructions. But in the final Run instruction where I am supposed to get success, I get the following error: “Error running ‘ProvisionerApplication’: Command line too long. Shorten command line for ProvisionerApplication or also for Application default configuration. I used the shorten command line option to choose JAR manifest and other options and it was more successful. The Provisioner seemed to start up but then encounters the error that you see in the log attached: org.springframework.beans.factory.UnsatisfiedDependencyException: Error creating bean with name 'org.apache.fineract.cn.anubis.config.AnubisSecurityConfigurerAdapter': Unsatisfied dependency expressed through method 'configureGlobal' parameter 1; nested exception is org.springframework.beans.factory.UnsatisfiedDependencyException: Error creating bean with name 'org.apache.fineract.cn.anubis.security.IsisAuthenticatedAuthenticationProvider': Unsatisfied dependency expressed through constructor parameter 0; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'org.apache.fineract.cn.anubis.provider.SystemRsaKeyProvider': Invocation of init method failed; nested exception is java.lang.NumberFormatException: For input string: "654279..." Rohit From: Rohit Jain Sent: Thursday, December 12, 2019 1:08 PM To: dev@fineract.apache.org<mailto:dev@fineract.apache.org> Cc: Ebenezer Graham <egraha...@alustudent.com<mailto:egraha...@alustudent.com>> Subject: RE: help jump starting? Awesome Juhan! Will try that. From: Juhan Aasaru <aas...@gmail.com<mailto:aas...@gmail.com>> Sent: Thursday, December 12, 2019 1:57 AM To: Dev <dev@fineract.apache.org<mailto:dev@fineract.apache.org>> Cc: Ebenezer Graham <egraha...@alustudent.com<mailto:egraha...@alustudent.com>> Subject: Re: help jump starting? Hi! I cannot help you with the error you got but instead I will propose a better solution. Right now you have been trying to set up Fineract-CN using demo server which is more suitable to demonstrate the solution. This doesn't help you much with getting started with developmentent as you cannot run individual micro services directly from your IDE. Instead I wrote a new tutorial how to set up bare minimum of Fineract-CN: https://cwiki.apache.org/confluence/display/FINERACT/Bare+minimum+to+run+Fineract-CN+locally This only sets up Provisioner and Identity micro services but you should get them running with your IDE (I use IntelliJ) so you can jump into development and maybe compose a proof-of-concept with only these two micro services. It is possible to add other micro services step-by-step afterwards but my instructions don't cover that. In the end of the tutorial I also propose starting up Fims Web App (UI of fineract-cn) but currently I didn't manage to do complete it myself. Anyway I propose to test my instructions as you should get up to speed quickly. Anyone else is welcome to give feedback as well (or fix directly in Confluence). Kind regards Juhan Kontakt Rohit Jain (<rohit.j...@esgyn.com<mailto:rohit.j...@esgyn.com>>) kirjutas kuupäeval K, 11. detsember 2019 kell 19:31: Hi guys, I am stuck. Any pointers? Advice on a different approach? Rohit From: Rohit Jain Sent: Monday, December 9, 2019 1:11 PM To: dev@fineract.apache.org<mailto:dev@fineract.apache.org> Cc: Ebenezer Graham <egraha...@alustudent.com<mailto:egraha...@alustudent.com>> Subject: RE: help jump starting? That is what I thought. I think it was the size of the log: ezmlm-reject: fatal: Sorry, I don't accept messages larger than 1000000 bytes (#5.2.3) I have attached a zipped version. From: Awasum Yannick <awa...@apache.org<mailto:awa...@apache.org>> Sent: Monday, December 9, 2019 1:03 PM To: Dev <dev@fineract.apache.org<mailto:dev@fineract.apache.org>> Cc: Ebenezer Graham <egraha...@alustudent.com<mailto:egraha...@alustudent.com>> Subject: Re: help jump starting? On Mon, Dec 9, 2019 at 6:32 PM Rohit Jain <rohit.j...@esgyn.com<mailto:rohit.j...@esgyn.com>> wrote: This message got rejected because I had an attached log file. I am resending it without the log file. If there is a way to share the log file, let me know. … This list supports attachments. I dont know why you are having problems. Just paste the Logs in the body of the email. Hi guys, I appreciate your guidance. However, let me share some considerations and perhaps you can guide me better: * My focus is to see if we can demonstrate Fineract working with Apache Trafodion instead of PostgreSQL + Cassandra. Initially the focus will be to switch PostgreSQL with Trafodion using the EclipseLink/JPA infrastructure that has been put in place. * To that end I am not interested in exploring all the intricate details of the components or tools used by Fineract, since that would take me a lot of time and effort with little value, when you experts are already taking care of that part. That is, I have no idea what npm does or why. I am just following the directions on the build web page so I can get it running with PostgreSQL + Cassandra, then see how I can switch Fineract to use Trafodion, and then run the same with Trafodion to hopefully get the same results. * I am doing this on a Windows 10 Pro OS x64 PC Intel i7-6500U 2.50 GHz CPU, 2592 MHz, 2 Core(s), 4 Logical Processor(s) with 16 GB of physical memory and total virtual memory of 35 GB with around 22.5 GB available. If I need to start the process again on some other system/OS I can, but from what I have been told so far, it should work on this laptop. * I ignored putting the fineract-cn-fims-web-app directory in a integration-tests directory since in the past the host directory path has been irrelevant for most purposes. But I guess I was wrong in this case. So, I changed that and built Fineract CN again successfully, i.e. completed Step 2 recommended option 1. But when I ran Step 3 Option B – with persistence Command I, I am still getting errors. I don’t have the log from the beginning (my bad) but have most of the relevant parts of the log attached, if that gives any pointers as to what the issue may be. * If I should follow a different recipe to do what I need to do in order to move forward, I am more than willing. I don’t know if a docker build is what will work for what I want to do, since my intent is not to just demo / use the product, but rather to get it running with tests as it currently stands and then switch to Trafodion with whatever effort that requires (potentially source or configuration changes), and then run the tests again to prove that it all works just the same. Later I would like to run some performance tests at scale to demonstrate where Trafodion can really make a difference for Fineract customers needing high-scalability. But I need to get it all working first. So, any guidance would greatly be appreciated. Thanks for your patience and all your help! Rohit From: Awasum Yannick <awa...@apache.org<mailto:awa...@apache.org>> Sent: Friday, December 6, 2019 2:18 AM To: Dev <dev@fineract.apache.org<mailto:dev@fineract.apache.org>> Cc: Rohit Jain <rohit.j...@esgyn.com<mailto:rohit.j...@esgyn.com>>; Ebenezer Graham <egraha...@alustudent.com<mailto:egraha...@alustudent.com>> Subject: Re: help jump starting? Hi Juhan, I think you are right and it is time to rewrite the build instructions for Fineract CN to adopt the Docker approach. Anyone interested in doing this work? On Fri, Dec 6, 2019 at 7:50 AM Juhan Aasaru <aas...@gmail.com<mailto:aas...@gmail.com>> wrote: Hi! The problem with npm is caused by the fact that you have not cd into correct directory. The instructions under step #4 have this: cd into ‘integration-tests/fineract-cn-fims-web-app' Anyway, we can all agree that the build instructions of Fineract-CN are almost impossible to properly follow. And actually there is no need to use demo server. Demo server sets up the system but its quite untransparent and difficult to understand for a newcomer. Don't get me wrong, it is a great resource afterwards when learning how to call micro services from code and how to use listeners. To set up the system for the first time I recommend to use Docker-Compose with Postman instead: https://github.com/apache/fineract-cn-docker-compose#2-deploy-fineract-manually-using-postman This is all tested several times and should work like a charm. The following is an idea of mine that is not anywhere documented yet due to lack of time. Based on Docker-Compose process we could also create instructions where micro services are not started within Docker but they are started directly (run from IDE or java -jar ...). Docker-Compose instructions include creating .env file with common properties (and RSA keys). To run micro services directly basically a similar file should be created, let's call it applciation-locally.yml and then when starting apps this file should be passed as flag: --spring.config.location=../application-locally.yml Provisioning is be done with Postman (see instructions at fineract-cn-docker-compose) - this way one understands better what steps are taking place during provisioning. Kind regards Juhan Kontakt Awasum Yannick (<yannickawa...@gmail.com<mailto:yannickawa...@gmail.com>>) kirjutas kuupäeval R, 6. detsember 2019 kell 04:35: Why are you running npm (x) on a non node, non js repo (demo-server) ? The timeout might be showing a lack of memory problem. What is the capacity of your machine? On Thu, Dec 5, 2019 at 9:40 PM Rohit Jain <rohit.j...@esgyn.com<mailto:rohit.j...@esgyn.com>> wrote: Thanks guys! I think I got off the track right at the beginning of Step 3: Orchestrate Microservices Using The Demo-server. It said “… consider manually orchestrating …”. I thought I needed to go to https://github.com/vishwasbabu/ProvisioningFineractCN. That is where it says start ActiveMQ. Which is why I did. I abandoned that effort when I realized that “consider” meant optional, and I did not really need to do that, since that whole key generation was getting a bit complicated on Windows 10. But then ActiveMQ was still running when I proceeded with the rest of the instructions to build. My bad! Because I had started ActiveMQ, initially demo-server immediately complained about not being able to use port 61616. In fact, the instructions say that this port should not be in use before starting demo-server. I guess I did not pay attention to that part until I got that error. I then stopped ActiveMQ, changed the port 61616 it was using, to 61615, and restarted it (doh!). Demo-server then ran for a long time. But then it gave me a slew of connection refused errors for port 61616, even though ActiveMQ was not using it, and not that the port was being used. Regardless, I stopped ActiveMQ and this time ran with Command II in the documentation. I did not run into the connection refused error! This time I got some [DicoverClient-n] errors that c.n.discovery.TimedSupervisorTask – task supervisor timed out But demo-server kept going after those timeouts and has now been running for 3 hours with no message "INFO o.e.jetty.server.AbstractConnector - StoppedServerConnector@1bdb0376{HTTP/1.1,[http/1.1]}<mailto:StoppedServerConnector@1bdb0376%7bHTTP/1.1,%5bhttp/1.1%5d%7d>" written to any of the logs as yet. I guess I should have direct standard out to a log since it does not seem to be capturing everything in the logs and I might have just missed that message. I decided to proceed to step 4 but I get the following when I run npm i … c:\Apps\fineract-cn-demo-server>npm i npm WARN saveError ENOENT: no such file or directory, open 'c:\Apps\fineract-cn-demo-server\package.json' npm notice created a lockfile as package-lock.json. You should commit this file. npm WARN enoent ENOENT: no such file or directory, open 'c:\Apps\fineract-cn-demo-server\package.json' npm WARN fineract-cn-demo-server No description npm WARN fineract-cn-demo-server No repository field. npm WARN fineract-cn-demo-server No README data npm WARN fineract-cn-demo-server No license field. up to date in 0.843s found 0 vulnerabilities c:\Apps\fineract-cn-demo-server>npm run dev npm ERR! code ENOENT npm ERR! syscall open npm ERR! path c:\Apps\fineract-cn-demo-server\package.json npm ERR! errno -4058 npm ERR! enoent ENOENT: no such file or directory, open 'c:\Apps\fineract-cn-demo-server\package.json' npm ERR! enoent This is related to npm not being able to find a file. npm ERR! enoent There us a package-lock.json but no package.json. From: Ebenezer Graham <ebenezergraha...@gmail.com<mailto:ebenezergraha...@gmail.com>> Sent: Thursday, December 5, 2019 7:39 AM To: Awasum Yannick <yannickawa...@gmail.com<mailto:yannickawa...@gmail.com>> Cc: dev@fineract.apache.org<mailto:dev@fineract.apache.org>; Ebenezer Graham <egraha...@alustudent.com<mailto:egraha...@alustudent.com>> Subject: Re: help jump starting? Thanks Awasum for the response. I think that's the issue too @Rohit, it's not necessary to configure a standalone ActiveMQ when running the demo-server. This library (https://github.com/apache/fineract-cn-command) helps to set up an embedded broker. Also, what is the state of this issue https://github.com/flyway/flyway/issues/2103 Warm regards. On Thu, Dec 5, 2019 at 11:07 AM Awasum Yannick <yannickawa...@gmail.com<mailto:yannickawa...@gmail.com>> wrote: Hi Demo server at times runs with an embedded activemq and other data stores. So if you already have an activemq installed on your host, then thats what is causing the port in use exception. Hope this helps. On Wed, Dec 4, 2019, 23:06 Rohit Jain <rohit.j...@esgyn.com<mailto:rohit.j...@esgyn.com>> wrote: Hi Ebenezer, A thread by the same subject line was initiated by my colleague, Eric Owhadi, on 06 Jun, 20:51. He ran into an issue: Could not connect to broker URL: tcp://localhost:61616. Reason: java.net.ConnectException: Connection refused It so happens that 4 months later I have run into the exact same issue. Except that I am running everything on my Windows 10 laptop. Also, I installed and ran ActiveMQ on my laptop. In fact, the demo server got an error initially since it found that port 61616 was being used. So, I modified the activemq.xml file to change that port to avoid the conflict. Then the demo server started all the application services, and then at the end ran into the error above. You responded to Eric and said that you would provide a resolution to this problem. Don’t know if you have a resolution that I can use to move forward. The Demo server created the appropriate databases and keyspaces in PostgreSQL and Cassandra respectively. Rohit -- Best Regards, Ebenezer Graham BSc (Hons) Computing [https://lh5.googleusercontent.com/UZy71H9Bdvv5lD_xcn789yjoyptPhMW7HAv6d9yBGNmLb0sQFFFN3QrS96LhXwlmbS8rJD8RJwUbNTF9TClOo52RqMcf14vkSuiJ6rejMJbYGPE6YBIpTLu8ockuBAYqGfeWRTOX] GitHub<https://ebenezergraham.me> | LinkedIn<https://www.linkedin.com/in/ebenezer-graham/> | Personal Website<https://ebenezergraham.me> skype: ebenezer.graham | Phone: +230 5840 9206<tel:+230%205840%209206> “Talk is cheap, show me the Code” - Linus Torvalds
