Hi, Venkata krishnan

Thank you for your involvement and suggestions, and hope that the design
goals of this FLIP will be helpful to your business.

>>> 1. In the proposed FLIP, given the example for the dynamic table, do the
data sources always come from a single lake storage such as Paimon or does
the same proposal solve for 2 disparate storage systems like Kafka and
Iceberg where Kafka events are ETLed to Iceberg similar to Paimon?
Basically the lambda architecture that is mentioned in the FLIP as well.
I'm wondering if it is possible to switch b/w sources based on the
execution mode, for eg: if it is backfill operation, switch to a data lake
storage system like Iceberg, otherwise an event streaming system like Kafka.

Dynamic table is a design abstraction at the framework level and is not
tied to the physical implementation of the connector. If a connector
supports a combination of Kafka and lake storage, this works fine.

>>> 2. What happens in the context of a bootstrap (batch) + nearline update
(streaming) case that are stateful applications? What I mean by that is,
will the state from the batch application be transferred to the nearline
application after the bootstrap execution is complete?

I think this is another orthogonal thing, something that FLIP-327 tries to
address, not directly related to Dynamic Table.

[1]
https://cwiki.apache.org/confluence/display/FLINK/FLIP-327%3A+Support+switching+from+batch+to+stream+mode+to+improve+throughput+when+processing+backlog+data

Best,
Ron

Venkatakrishnan Sowrirajan <vsowr...@asu.edu> 于2024年3月30日周六 07:06写道:

> Ron and Lincoln,
>
> Great proposal and interesting discussion for adding support for dynamic
> tables within Flink.
>
> At LinkedIn, we are also trying to solve compute/storage convergence for
> similar problems discussed as part of this FLIP, specifically periodic
> backfill, bootstrap + nearline update use cases using single implementation
> of business logic (single script).
>
> Few clarifying questions:
>
> 1. In the proposed FLIP, given the example for the dynamic table, do the
> data sources always come from a single lake storage such as Paimon or does
> the same proposal solve for 2 disparate storage systems like Kafka and
> Iceberg where Kafka events are ETLed to Iceberg similar to Paimon?
> Basically the lambda architecture that is mentioned in the FLIP as well.
> I'm wondering if it is possible to switch b/w sources based on the
> execution mode, for eg: if it is backfill operation, switch to a data lake
> storage system like Iceberg, otherwise an event streaming system like
> Kafka.
> 2. What happens in the context of a bootstrap (batch) + nearline update
> (streaming) case that are stateful applications? What I mean by that is,
> will the state from the batch application be transferred to the nearline
> application after the bootstrap execution is complete?
>
> Regards
> Venkata krishnan
>
>
> On Mon, Mar 25, 2024 at 8:03 PM Ron liu <ron9....@gmail.com> wrote:
>
> > Hi, Timo
> >
> > Thanks for your quick response, and your suggestion.
> >
> > Yes, this discussion has turned into confirming whether it's a special
> > table or a special MV.
> >
> > 1. The key problem with MVs is that they don't support modification, so I
> > prefer it to be a special table. Although the periodic refresh behavior
> is
> > more characteristic of an MV, since we are already a special table,
> > supporting periodic refresh behavior is quite natural, similar to
> Snowflake
> > dynamic tables.
> >
> > 2. Regarding the keyword UPDATING, since the current Regular Table is a
> > Dynamic Table, which implies support for updating through Continuous
> Query,
> > I think it is redundant to add the keyword UPDATING. In addition,
> UPDATING
> > can not reflect the Continuous Query part, can not express the purpose we
> > want to simplify the data pipeline through Dynamic Table + Continuous
> > Query.
> >
> > 3. From the perspective of the SQL standard definition, I can understand
> > your concerns about Derived Table, but is it possible to make a slight
> > adjustment to meet our needs? Additionally, as Lincoln mentioned, the
> > Google Looker platform has introduced Persistent Derived Table, and there
> > are precedents in the industry; could Derived Table be a candidate?
> >
> > Of course, look forward to your better suggestions.
> >
> > Best,
> > Ron
> >
> >
> >
> > Timo Walther <twal...@apache.org> 于2024年3月25日周一 18:49写道:
> >
> > > After thinking about this more, this discussion boils down to whether
> > > this is a special table or a special materialized view. In both cases,
> > > we would need to add a special keyword:
> > >
> > > Either
> > >
> > > CREATE UPDATING TABLE
> > >
> > > or
> > >
> > > CREATE UPDATING MATERIALIZED VIEW
> > >
> > > I still feel that the periodic refreshing behavior is closer to a MV.
> If
> > > we add a special keyword to MV, the optimizer would know that the data
> > > cannot be used for query optimizations.
> > >
> > > I will ask more people for their opinion.
> > >
> > > Regards,
> > > Timo
> > >
> > >
> > > On 25.03.24 10:45, Timo Walther wrote:
> > > > Hi Ron and Lincoln,
> > > >
> > > > thanks for the quick response and the very insightful discussion.
> > > >
> > > >  > we might limit future opportunities to optimize queries
> > > >  > through automatic materialization rewriting by allowing data
> > > >  > modifications, thus losing the potential for such optimizations.
> > > >
> > > > This argument makes a lot of sense to me. Due to the updates, the
> > system
> > > > is not in full control of the persisted data. However, the system is
> > > > still in full control of the job that powers the refresh. So if the
> > > > system manages all updating pipelines, it could still leverage
> > automatic
> > > > materialization rewriting but without leveraging the data at rest
> (only
> > > > the data in flight).
> > > >
> > > >  > we are considering another candidate, Derived Table, the term
> > 'derive'
> > > >  > suggests a query, and 'table' retains modifiability. This approach
> > > >  > would not disrupt our current concept of a dynamic table
> > > >
> > > > I did some research on this term. The SQL standard uses the term
> > > > "derived table" extensively (defined in section 4.17.3). Thus, a lot
> of
> > > > vendors adopt this for simply referring to a table within a
> subclause:
> > > >
> > > >
> >
> https://urldefense.com/v3/__https://dev.mysql.com/doc/refman/8.0/en/derived-tables.html__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j735ghdiMp$
> > > >
> > > >
> > >
> >
> https://urldefense.com/v3/__https://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc32300.1600/doc/html/san1390612291252.html__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j737h1gRux$
> > > >
> > > >
> > >
> >
> https://urldefense.com/v3/__https://www.c-sharpcorner.com/article/derived-tables-vs-common-table-expressions/__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j739bWIEcL$
> > > >
> > > >
> > >
> >
> https://urldefense.com/v3/__https://stackoverflow.com/questions/26529804/what-are-the-derived-tables-in-my-explain-statement__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j739HnGtQf$
> > > >
> > > >
> >
> https://urldefense.com/v3/__https://www.sqlservercentral.com/articles/sql-derived-tables__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j737DeBiqg$
> > > >
> > > > Esp. the latter example is interesting, SQL Server allows things like
> > > > this on derived tables:
> > > >
> > > > UPDATE T SET Name='Timo' FROM (SELECT * FROM Product) AS T
> > > >
> > > > SELECT * FROM Product;
> > > >
> > > > Btw also Snowflake's dynamic table state:
> > > >
> > > >  > Because the content of a dynamic table is fully determined
> > > >  > by the given query, the content cannot be changed by using DML.
> > > >  > You don’t insert, update, or delete the rows in a dynamic table.
> > > >
> > > > So a new term makes a lot of sense.
> > > >
> > > > How about using `UPDATING`?
> > > >
> > > > CREATE UPDATING TABLE
> > > >
> > > > This reflects that modifications can be made and from an
> > > > English-language perspective you can PAUSE or RESUME the UPDATING.
> > > > Thus, a user can define UPDATING interval and mode?
> > > >
> > > > Looking forward to your thoughts.
> > > >
> > > > Regards,
> > > > Timo
> > > >
> > > >
> > > > On 25.03.24 07:09, Ron liu wrote:
> > > >> Hi, Ahmed
> > > >>
> > > >> Thanks for your feedback.
> > > >>
> > > >> Regarding your question:
> > > >>
> > > >>> I want to iterate on Timo's comments regarding the confusion
> between
> > > >> "Dynamic Table" and current Flink "Table". Should the refactoring of
> > the
> > > >> system happen in 2.0, should we rename it in this Flip ( as the
> > > >> suggestions
> > > >> in the thread ) and address the holistic changes in a separate Flip
> > > >> for 2.0?
> > > >>
> > > >> Lincoln proposed a new concept in reply to Timo: Derived Table,
> which
> > > >> is a
> > > >> combination of Dynamic Table + Continuous Query, and the use of
> > Derived
> > > >> Table will not conflict with existing concepts, what do you think?
> > > >>
> > > >>> I feel confused with how it is further with other components, the
> > > >> examples provided feel like a standalone ETL job, could you provide
> in
> > > >> the
> > > >> FLIP an example where the table is further used in subsequent
> queries
> > > >> (specially in batch mode).
> > > >>
> > > >> Thanks for your suggestion, I added how to use Dynamic Table in FLIP
> > > user
> > > >> story section, Dynamic Table can be referenced by downstream Dynamic
> > > >> Table
> > > >> and can also support OLAP queries.
> > > >>
> > > >> Best,
> > > >> Ron
> > > >>
> > > >> Ron liu <ron9....@gmail.com> 于2024年3月23日周六 10:35写道:
> > > >>
> > > >>> Hi, Feng
> > > >>>
> > > >>> Thanks for your feedback.
> > > >>>
> > > >>>> Although currently we restrict users from modifying the query, I
> > > wonder
> > > >>> if
> > > >>> we can provide a better way to help users rebuild it without
> > affecting
> > > >>> downstream OLAP queries.
> > > >>>
> > > >>> Considering the problem of data consistency, so in the first step
> we
> > > are
> > > >>> strictly limited in semantics and do not support modify the query.
> > > >>> This is
> > > >>> really a good problem, one of my ideas is to introduce a syntax
> > > >>> similar to
> > > >>> SWAP [1], which supports exchanging two Dynamic Tables.
> > > >>>
> > > >>>>  From the documentation, the definitions SQL and job information
> are
> > > >>> stored in the Catalog. Does this mean that if a system needs to
> adapt
> > > to
> > > >>> Dynamic Tables, it also needs to store Flink's job information in
> the
> > > >>> corresponding system?
> > > >>> For example, does MySQL's Catalog need to store flink job
> information
> > > as
> > > >>> well?
> > > >>>
> > > >>> Yes, currently we need to rely on Catalog to store refresh job
> > > >>> information.
> > > >>>
> > > >>>> Users still need to consider how much memory is being used, how
> > large
> > > >>> the concurrency is, which type of state backend is being used, and
> > > >>> may need
> > > >>> to set TTL expiration.
> > > >>>
> > > >>> Similar to the current practice, job parameters can be set via the
> > > Flink
> > > >>> conf or SET commands
> > > >>>
> > > >>>> When we submit a refresh command, can we help users detect if
> there
> > > are
> > > >>> any
> > > >>> running jobs and automatically stop them before executing the
> refresh
> > > >>> command? Then wait for it to complete before restarting the
> > background
> > > >>> streaming job?
> > > >>>
> > > >>> Purely from a technical implementation point of view, your proposal
> > is
> > > >>> doable, but it would be more costly. Also I think data consistency
> > > >>> itself
> > > >>> is the responsibility of the user, similar to how Regular Table is
> > > >>> now also
> > > >>> the responsibility of the user, so it's consistent with its
> behavior
> > > >>> and no
> > > >>> additional guarantees are made at the engine level.
> > > >>>
> > > >>> Best,
> > > >>> Ron
> > > >>>
> > > >>>
> > > >>> Ahmed Hamdy <hamdy10...@gmail.com> 于2024年3月22日周五 23:50写道:
> > > >>>
> > > >>>> Hi Ron,
> > > >>>> Sorry for joining the discussion late, thanks for the effort.
> > > >>>>
> > > >>>> I think the base idea is great, however I have a couple of
> comments:
> > > >>>> - I want to iterate on Timo's comments regarding the confusion
> > between
> > > >>>> "Dynamic Table" and current Flink "Table". Should the refactoring
> of
> > > >>>> the
> > > >>>> system happen in 2.0, should we rename it in this Flip ( as the
> > > >>>> suggestions
> > > >>>> in the thread ) and address the holistic changes in a separate
> Flip
> > > for
> > > >>>> 2.0?
> > > >>>> - I feel confused with how it is further with other components,
> the
> > > >>>> examples provided feel like a standalone ETL job, could you
> provide
> > > >>>> in the
> > > >>>> FLIP an example where the table is further used in subsequent
> > queries
> > > >>>> (specially in batch mode).
> > > >>>> - I really like the standard of keeping the unified batch and
> > > streaming
> > > >>>> approach
> > > >>>> Best Regards
> > > >>>> Ahmed Hamdy
> > > >>>>
> > > >>>>
> > > >>>> On Fri, 22 Mar 2024 at 12:07, Lincoln Lee <lincoln.8...@gmail.com
> >
> > > >>>> wrote:
> > > >>>>
> > > >>>>> Hi Timo,
> > > >>>>>
> > > >>>>> Thanks for your thoughtful inputs!
> > > >>>>>
> > > >>>>> Yes, expanding the MATERIALIZED VIEW(MV) could achieve the same
> > > >>>> function,
> > > >>>>> but our primary concern is that by using a view, we might limit
> > > future
> > > >>>>> opportunities
> > > >>>>> to optimize queries through automatic materialization rewriting
> > [1],
> > > >>>>> leveraging
> > > >>>>> the support for MV by physical storage. This is because we would
> be
> > > >>>>> breaking
> > > >>>>> the intuitive semantics of a materialized view (a materialized
> view
> > > >>>>> represents
> > > >>>>> the result of a query) by allowing data modifications, thus
> losing
> > > the
> > > >>>>> potential
> > > >>>>> for such optimizations.
> > > >>>>>
> > > >>>>> With these considerations in mind, we were inspired by Google
> > > Looker's
> > > >>>>> Persistent
> > > >>>>> Derived Table [2]. PDT is designed for building Looker's
> automated
> > > >>>>> modeling,
> > > >>>>> aligning with our purpose for the stream-batch automatic
> pipeline.
> > > >>>>> Therefore,
> > > >>>>> we are considering another candidate, Derived Table, the term
> > > 'derive'
> > > >>>>> suggests a
> > > >>>>> query, and 'table' retains modifiability. This approach would not
> > > >>>> disrupt
> > > >>>>> our current
> > > >>>>> concept of a dynamic table, preserving the future utility of MVs.
> > > >>>>>
> > > >>>>> Conceptually, a Derived Table is a Dynamic Table + Continuous
> > > >>>>> Query. By
> > > >>>>> introducing
> > > >>>>>   a new concept Derived Table for this FLIP, this makes all
> > > >>>>> concepts to
> > > >>>> play
> > > >>>>> together nicely.
> > > >>>>>
> > > >>>>> What do you think about this?
> > > >>>>>
> > > >>>>> [1]
> >
> https://urldefense.com/v3/__https://calcite.apache.org/docs/materialized_views.html__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j73_NFf4D5$
> > > >>>>> [2]
> > > >>>>>
> > > >>>>>
> > > >>>>
> > >
> >
> https://urldefense.com/v3/__https://cloud.google.com/looker/docs/derived-tables*persistent_derived_tables__;Iw!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j7382-2zI3$
> > > >>>>>
> > > >>>>>
> > > >>>>> Best,
> > > >>>>> Lincoln Lee
> > > >>>>>
> > > >>>>>
> > > >>>>> Timo Walther <twal...@apache.org> 于2024年3月22日周五 17:54写道:
> > > >>>>>
> > > >>>>>> Hi Ron,
> > > >>>>>>
> > > >>>>>> thanks for the detailed answer. Sorry, for my late reply, we
> had a
> > > >>>>>> conference that kept me busy.
> > > >>>>>>
> > > >>>>>>   > In the current concept[1], it actually includes: Dynamic
> > Tables
> > > &
> > > >>>>>>   > & Continuous Query. Dynamic Table is just an abstract
> logical
> > > >>>> concept
> > > >>>>>>
> > > >>>>>> This explanation makes sense to me. But the docs also say "A
> > > >>>> continuous
> > > >>>>>> query is evaluated on the dynamic table yielding a new dynamic
> > > >>>> table.".
> > > >>>>>> So even our regular CREATE TABLEs are considered dynamic tables.
> > > This
> > > >>>>>> can also be seen in the diagram "Dynamic Table -> Continuous
> Query
> > > ->
> > > >>>>>> Dynamic Table". Currently, Flink queries can only be executed on
> > > >>>> Dynamic
> > > >>>>>> Tables.
> > > >>>>>>
> > > >>>>>>   > In essence, a materialized view represents the result of a
> > > query.
> > > >>>>>>
> > > >>>>>> Isn't that what your proposal does as well?
> > > >>>>>>
> > > >>>>>>   > the object of the suspend operation is the refresh task of
> the
> > > >>>>>> dynamic table
> > > >>>>>>
> > > >>>>>> I understand that Snowflake uses the term [1] to merge their
> > > concepts
> > > >>>> of
> > > >>>>>> STREAM, TASK, and TABLE into one piece of concept. But Flink has
> > no
> > > >>>>>> concept of a "refresh task". Also, they already introduced
> > > >>>> MATERIALIZED
> > > >>>>>> VIEW. Flink is in the convenient position that the concept of
> > > >>>>>> materialized views is not taken (reserved maybe for exactly this
> > use
> > > >>>>>> case?). And SQL standard concept could be "slightly adapted" to
> > our
> > > >>>>>> needs. Looking at other vendors like Postgres[2], they also use
> > > >>>>>> `REFRESH` commands so why not adding additional commands such as
> > > >>>> DELETE
> > > >>>>>> or UPDATE. Oracle supports  "ON PREBUILT TABLE clause tells the
> > > >>>> database
> > > >>>>>> to use an existing table segment"[3] which comes closer to what
> we
> > > >>>> want
> > > >>>>>> as well.
> > > >>>>>>
> > > >>>>>>   > it is not intended to support data modification
> > > >>>>>>
> > > >>>>>> This is an argument that I understand. But we as Flink could
> allow
> > > >>>> data
> > > >>>>>> modifications. This way we are only extending the standard and
> > don't
> > > >>>>>> introduce new concepts.
> > > >>>>>>
> > > >>>>>> If we can't agree on using MATERIALIZED VIEW concept. We should
> > fix
> > > >>>> our
> > > >>>>>> syntax in a Flink 2.0 effort. Making regular tables bounded and
> > > >>>> dynamic
> > > >>>>>> tables unbounded. We would be closer to the SQL standard with
> this
> > > >>>>>> and
> > > >>>>>> pave the way for the future. I would actually support this if
> all
> > > >>>>>> concepts play together nicely.
> > > >>>>>>
> > > >>>>>>   > In the future, we can consider extending the statement set
> > > syntax
> > > >>>> to
> > > >>>>>> support the creation of multiple dynamic tables.
> > > >>>>>>
> > > >>>>>> It's good that we called the concept STATEMENT SET. This allows
> us
> > > to
> > > >>>>>> defined CREATE TABLE within. Even if it might look a bit
> > confusing.
> > > >>>>>>
> > > >>>>>> Regards,
> > > >>>>>> Timo
> > > >>>>>>
> > > >>>>>> [1]
> >
> https://urldefense.com/v3/__https://docs.snowflake.com/en/user-guide/dynamic-tables-about__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j73zexZBXu$
> > > >>>>>> [2]
> > > >>>>>>
> > > >>>>
> > >
> >
> https://urldefense.com/v3/__https://www.postgresql.org/docs/current/sql-creatematerializedview.html__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j73zbNhvS7$
> > > >>>>>> [3]
> >
> https://urldefense.com/v3/__https://oracle-base.com/articles/misc/materialized-views__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j739xS1kvD$
> > > >>>>>>
> > > >>>>>> On 21.03.24 04:14, Feng Jin wrote:
> > > >>>>>>> Hi Ron and Lincoln
> > > >>>>>>>
> > > >>>>>>> Thanks for driving this discussion.  I believe it will greatly
> > > >>>> improve
> > > >>>>>> the
> > > >>>>>>> convenience of managing user real-time pipelines.
> > > >>>>>>>
> > > >>>>>>> I have some questions.
> > > >>>>>>>
> > > >>>>>>> *Regarding Limitations of Dynamic Table:*
> > > >>>>>>>
> > > >>>>>>>> Does not support modifying the select statement after the
> > dynamic
> > > >>>>> table
> > > >>>>>>> is created.
> > > >>>>>>>
> > > >>>>>>> Although currently we restrict users from modifying the query,
> I
> > > >>>> wonder
> > > >>>>>> if
> > > >>>>>>> we can provide a better way to help users rebuild it without
> > > >>>> affecting
> > > >>>>>>> downstream OLAP queries.
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>> *Regarding the management of background jobs:*
> > > >>>>>>>
> > > >>>>>>> 1. From the documentation, the definitions SQL and job
> > information
> > > >>>> are
> > > >>>>>>> stored in the Catalog. Does this mean that if a system needs to
> > > >>>> adapt
> > > >>>>> to
> > > >>>>>>> Dynamic Tables, it also needs to store Flink's job information
> in
> > > >>>> the
> > > >>>>>>> corresponding system?
> > > >>>>>>> For example, does MySQL's Catalog need to store flink job
> > > >>>> information
> > > >>>>> as
> > > >>>>>>> well?
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>> 2. Users still need to consider how much memory is being used,
> > how
> > > >>>>> large
> > > >>>>>>> the concurrency is, which type of state backend is being used,
> > and
> > > >>>> may
> > > >>>>>> need
> > > >>>>>>> to set TTL expiration.
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>> *Regarding the Refresh Part:*
> > > >>>>>>>
> > > >>>>>>>> If the refresh mode is continuous and a background job is
> > running,
> > > >>>>>>> caution should be taken with the refresh command as it can lead
> > to
> > > >>>>>>> inconsistent data.
> > > >>>>>>>
> > > >>>>>>> When we submit a refresh command, can we help users detect if
> > there
> > > >>>> are
> > > >>>>>> any
> > > >>>>>>> running jobs and automatically stop them before executing the
> > > >>>> refresh
> > > >>>>>>> command? Then wait for it to complete before restarting the
> > > >>>> background
> > > >>>>>>> streaming job?
> > > >>>>>>>
> > > >>>>>>> Best,
> > > >>>>>>> Feng
> > > >>>>>>>
> > > >>>>>>> On Tue, Mar 19, 2024 at 9:40 PM Lincoln Lee <
> > > lincoln.8...@gmail.com
> > > >>>>>
> > > >>>>>> wrote:
> > > >>>>>>>
> > > >>>>>>>> Hi Yun,
> > > >>>>>>>>
> > > >>>>>>>> Thank you very much for your valuable input!
> > > >>>>>>>>
> > > >>>>>>>> Incremental mode is indeed an attractive idea, we have also
> > > >>>> discussed
> > > >>>>>>>> this, but in the current design,
> > > >>>>>>>>
> > > >>>>>>>> we first provided two refresh modes: CONTINUOUS and
> > > >>>>>>>> FULL. Incremental mode can be introduced
> > > >>>>>>>>
> > > >>>>>>>> once the execution layer has the capability.
> > > >>>>>>>>
> > > >>>>>>>> My answer for the two questions:
> > > >>>>>>>>
> > > >>>>>>>> 1.
> > > >>>>>>>> Yes, cascading is a good question.  Current proposal provides
> a
> > > >>>>>>>> freshness that defines a dynamic
> > > >>>>>>>> table relative to the base table’s lag. If users need to
> > consider
> > > >>>> the
> > > >>>>>>>> end-to-end freshness of multiple
> > > >>>>>>>> cascaded dynamic tables, he can manually split them for now.
> Of
> > > >>>>>>>> course, how to let multiple cascaded
> > > >>>>>>>>    or dependent dynamic tables complete the freshness
> definition
> > > in
> > > >>>> a
> > > >>>>>>>> simpler way, I think it can be
> > > >>>>>>>> extended in the future.
> > > >>>>>>>>
> > > >>>>>>>> 2.
> > > >>>>>>>> Cascading refresh is also a part we focus on discussing. In
> this
> > > >>>> flip,
> > > >>>>>>>> we hope to focus as much as
> > > >>>>>>>> possible on the core features (as it already involves a lot
> > > >>>> things),
> > > >>>>>>>> so we did not directly introduce related
> > > >>>>>>>>    syntax. However, based on the current design, combined with
> > the
> > > >>>>>>>> catalog and lineage, theoretically,
> > > >>>>>>>> users can also finish the cascading refresh.
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>> Best,
> > > >>>>>>>> Lincoln Lee
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>> Yun Tang <myas...@live.com> 于2024年3月19日周二 13:45写道:
> > > >>>>>>>>
> > > >>>>>>>>> Hi Lincoln,
> > > >>>>>>>>>
> > > >>>>>>>>> Thanks for driving this discussion, and I am so excited to
> see
> > > >>>> this
> > > >>>>>> topic
> > > >>>>>>>>> being discussed in the Flink community!
> > > >>>>>>>>>
> > > >>>>>>>>>   From my point of view, instead of the work of unifying
> > > streaming
> > > >>>> and
> > > >>>>>>>> batch
> > > >>>>>>>>> in DataStream API [1], this FLIP actually could make users
> > > benefit
> > > >>>>> from
> > > >>>>>>>> one
> > > >>>>>>>>> engine to rule batch & streaming.
> > > >>>>>>>>>
> > > >>>>>>>>> If we treat this FLIP as an open-source implementation of
> > > >>>> Snowflake's
> > > >>>>>>>>> dynamic tables [2], we still lack an incremental refresh mode
> > to
> > > >>>> make
> > > >>>>>> the
> > > >>>>>>>>> ETL near real-time with a much cheaper computation cost.
> > However,
> > > >>>> I
> > > >>>>>> think
> > > >>>>>>>>> this could be done under the current design by introducing
> > > another
> > > >>>>>>>> refresh
> > > >>>>>>>>> mode in the future. Although the extra work of incremental
> view
> > > >>>>>>>> maintenance
> > > >>>>>>>>> would be much larger.
> > > >>>>>>>>>
> > > >>>>>>>>> For the FLIP itself, I have several questions below:
> > > >>>>>>>>>
> > > >>>>>>>>> 1. It seems this FLIP does not consider the lag of refreshes
> > > >>>> across
> > > >>>>> ETL
> > > >>>>>>>>> layers from ODS ---> DWD ---> APP [3]. We currently only
> > consider
> > > >>>> the
> > > >>>>>>>>> scheduler interval, which means we cannot use lag to
> > > automatically
> > > >>>>>>>> schedule
> > > >>>>>>>>> the upfront micro-batch jobs to do the work.
> > > >>>>>>>>> 2. To support the automagical refreshes, we should consider
> the
> > > >>>>> lineage
> > > >>>>>>>> in
> > > >>>>>>>>> the catalog or somewhere else.
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>> [1]
> > > >>>>>>>>>
> > > >>>>>>>>
> > > >>>>>>
> > > >>>>>
> > > >>>>
> > >
> >
> https://urldefense.com/v3/__https://cwiki.apache.org/confluence/display/FLINK/FLIP-134*3A*Batch*execution*for*the*DataStream*API__;JSsrKysrKw!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j7352JICzI$
> > > >>>>>>>>> [2]
> > >
> >
> https://urldefense.com/v3/__https://docs.snowflake.com/en/user-guide/dynamic-tables-about__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j73zexZBXu$
> > > >>>>>>>>> [3]
> > > >>>>
> >
> https://urldefense.com/v3/__https://docs.snowflake.com/en/user-guide/dynamic-tables-refresh__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j735ghqpxk$
> > > >>>>>>>>>
> > > >>>>>>>>> Best
> > > >>>>>>>>> Yun Tang
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>> ________________________________
> > > >>>>>>>>> From: Lincoln Lee <lincoln.8...@gmail.com>
> > > >>>>>>>>> Sent: Thursday, March 14, 2024 14:35
> > > >>>>>>>>> To: dev@flink.apache.org <dev@flink.apache.org>
> > > >>>>>>>>> Subject: Re: [DISCUSS] FLIP-435: Introduce a New Dynamic
> Table
> > > for
> > > >>>>>>>>> Simplifying Data Pipelines
> > > >>>>>>>>>
> > > >>>>>>>>> Hi Jing,
> > > >>>>>>>>>
> > > >>>>>>>>> Thanks for your attention to this flip! I'll try to answer
> the
> > > >>>>>> following
> > > >>>>>>>>> questions.
> > > >>>>>>>>>
> > > >>>>>>>>>> 1. How to define query of dynamic table?
> > > >>>>>>>>>> Use flink sql or introducing new syntax?
> > > >>>>>>>>>> If use flink sql, how to handle the difference in SQL
> between
> > > >>>>>> streaming
> > > >>>>>>>>> and
> > > >>>>>>>>>> batch processing?
> > > >>>>>>>>>> For example, a query including window aggregate based on
> > > >>>> processing
> > > >>>>>>>> time?
> > > >>>>>>>>>> or a query including global order by?
> > > >>>>>>>>>
> > > >>>>>>>>> Similar to `CREATE TABLE AS query`, here the `query` also
> uses
> > > >>>> Flink
> > > >>>>>> sql
> > > >>>>>>>>> and
> > > >>>>>>>>>
> > > >>>>>>>>> doesn't introduce a totally new syntax.
> > > >>>>>>>>> We will not change the status respect to
> > > >>>>>>>>>
> > > >>>>>>>>> the difference in functionality of flink sql itself on
> > streaming
> > > >>>> and
> > > >>>>>>>>> batch, for example,
> > > >>>>>>>>>
> > > >>>>>>>>> the proctime window agg on streaming and global sort on batch
> > > that
> > > >>>>> you
> > > >>>>>>>>> mentioned,
> > > >>>>>>>>>
> > > >>>>>>>>> in fact, do not work properly in the
> > > >>>>>>>>> other mode, so when the user modifies the
> > > >>>>>>>>>
> > > >>>>>>>>> refresh mode of a dynamic table that is not supported, we
> will
> > > >>>> throw
> > > >>>>> an
> > > >>>>>>>>> exception.
> > > >>>>>>>>>
> > > >>>>>>>>>> 2. Whether modify the query of dynamic table is allowed?
> > > >>>>>>>>>> Or we could only refresh a dynamic table based on the
> initial
> > > >>>> query?
> > > >>>>>>>>>
> > > >>>>>>>>> Yes, in the current design, the query definition of the
> > > >>>>>>>>> dynamic table is not allowed
> > > >>>>>>>>>
> > > >>>>>>>>>    to be modified, and you can only refresh the data based on
> > the
> > > >>>>>>>>> initial definition.
> > > >>>>>>>>>
> > > >>>>>>>>>> 3. How to use dynamic table?
> > > >>>>>>>>>> The dynamic table seems to be similar to the materialized
> > view.
> > > >>>>> Will
> > > >>>>>>>> we
> > > >>>>>>>>> do
> > > >>>>>>>>>> something like materialized view rewriting during the
> > > >>>> optimization?
> > > >>>>>>>>>
> > > >>>>>>>>> It's true that dynamic table and materialized view
> > > >>>>>>>>> are similar in some ways, but as Ron
> > > >>>>>>>>>
> > > >>>>>>>>> explains
> > > >>>>>>>>> there are differences. In terms of optimization, automated
> > > >>>>>>>>> materialization discovery
> > > >>>>>>>>>
> > > >>>>>>>>> similar to that supported by calcite is also a potential
> > > >>>> possibility,
> > > >>>>>>>>> perhaps with the
> > > >>>>>>>>>
> > > >>>>>>>>> addition of automated rewriting in the future.
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>> Best,
> > > >>>>>>>>> Lincoln Lee
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>> Ron liu <ron9....@gmail.com> 于2024年3月14日周四 14:01写道:
> > > >>>>>>>>>
> > > >>>>>>>>>> Hi, Timo
> > > >>>>>>>>>>
> > > >>>>>>>>>> Sorry for later response,  thanks for your feedback.
> > > >>>>>>>>>> Regarding your questions:
> > > >>>>>>>>>>
> > > >>>>>>>>>>> Flink has introduced the concept of Dynamic Tables many
> years
> > > >>>> ago.
> > > >>>>>>>> How
> > > >>>>>>>>>>
> > > >>>>>>>>>> does the term "Dynamic Table" fit into Flink's regular
> tables
> > > and
> > > >>>>> also
> > > >>>>>>>>>>
> > > >>>>>>>>>> how does it relate to Table API?
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>> I fear that adding the DYNAMIC TABLE keyword could cause
> > > >>>> confusion
> > > >>>>>>>> for
> > > >>>>>>>>>>> users, because a term for regular CREATE TABLE (that can be
> > > >>>> "kind
> > > >>>>> of
> > > >>>>>>>>>>> dynamic" as well and is backed by a changelog) is then
> > missing.
> > > >>>>> Also
> > > >>>>>>>>>>> given that we call our connectors for those tables,
> > > >>>>>>>> DynamicTableSource
> > > >>>>>>>>>>> and DynamicTableSink.
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>> In general, I find it contradicting that a TABLE can be
> > > >>>> "paused" or
> > > >>>>>>>>>>> "resumed". From an English language perspective, this does
> > > sound
> > > >>>>>>>>>>> incorrect. In my opinion (without much research yet), a
> > > >>>> continuous
> > > >>>>>>>>>>> updating trigger should rather be modelled as a CREATE
> > > >>>> MATERIALIZED
> > > >>>>>>>>> VIEW
> > > >>>>>>>>>>> (which users are familiar with?) or a new concept such as a
> > > >>>> CREATE
> > > >>>>>>>> TASK
> > > >>>>>>>>>>> (that can be paused and resumed?).
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>> 1.
> > > >>>>>>>>>> In the current concept[1], it actually includes: Dynamic
> > Tables
> > > &
> > > >>>>>>>>>> Continuous Query. Dynamic Table is just an abstract
> > > >>>>>>>>>> logical concept
> > > >>>>>>>>>> , which in its physical form represents either a table or a
> > > >>>>> changelog
> > > >>>>>>>>>> stream. It requires the combination with Continuous Query to
> > > >>>> achieve
> > > >>>>>>>>>> dynamic updates of the target table similar to a database’s
> > > >>>>>>>>>> Materialized View.
> > > >>>>>>>>>> We hope to upgrade the Dynamic Table to a real entity that
> > users
> > > >>>> can
> > > >>>>>>>>>> operate, which combines the logical concepts of Dynamic
> > Tables +
> > > >>>>>>>>>> Continuous Query. By integrating the definition of tables
> and
> > > >>>>> queries,
> > > >>>>>>>>>> it can achieve functions similar to Materialized Views,
> > > >>>> simplifying
> > > >>>>>>>>>> users' data processing pipelines.
> > > >>>>>>>>>> So, the object of the suspend operation is the refresh task
> of
> > > >>>> the
> > > >>>>>>>>>> dynamic table. The command  `ALTER DYNAMIC TABLE table_name
> > > >>>> SUSPEND
> > > >>>>> `
> > > >>>>>>>>>> is actually a shorthand for `ALTER DYNAMIC TABLE table_name
> > > >>>> SUSPEND
> > > >>>>>>>>>> REFRESH` (if written in full for clarity, we can also modify
> > > it).
> > > >>>>>>>>>>
> > > >>>>>>>>>>    2. Initially, we also considered Materialized Views
> > > >>>>>>>>>> , but ultimately decided against them. Materialized views
> are
> > > >>>>> designed
> > > >>>>>>>>>> to enhance query performance for workloads that consist of
> > > >>>> common,
> > > >>>>>>>>>> repetitive query patterns. In essence, a materialized view
> > > >>>>> represents
> > > >>>>>>>>>> the result of a query.
> > > >>>>>>>>>> However, it is not intended to support data modification.
> For
> > > >>>>>>>>>> Lakehouse scenarios, where the ability to delete or update
> > data
> > > >>>> is
> > > >>>>>>>>>> crucial (such as compliance with GDPR, FLIP-2), materialized
> > > >>>> views
> > > >>>>>>>>>> fall short.
> > > >>>>>>>>>>
> > > >>>>>>>>>> 3.
> > > >>>>>>>>>> Compared to CREATE (regular) TABLE, CREATE DYNAMIC TABLE not
> > > only
> > > >>>>>>>>>> defines metadata in the catalog but also automatically
> > initiates
> > > >>>> a
> > > >>>>>>>>>> data refresh task based on the query specified during table
> > > >>>>> creation.
> > > >>>>>>>>>> It dynamically executes data updates. Users can focus on
> data
> > > >>>>>>>>>> dependencies and data generation logic.
> > > >>>>>>>>>>
> > > >>>>>>>>>> 4.
> > > >>>>>>>>>> The new dynamic table does not conflict with the existing
> > > >>>>>>>>>> DynamicTableSource and DynamicTableSink interfaces. For the
> > > >>>>> developer,
> > > >>>>>>>>>> all that needs to be implemented is the new
> > CatalogDynamicTable,
> > > >>>>>>>>>> without changing the implementation of source and sink.
> > > >>>>>>>>>>
> > > >>>>>>>>>> 5. For now, the FLIP does not consider supporting Table API
> > > >>>>> operations
> > > >>>>>>>> on
> > > >>>>>>>>>> Dynamic Table
> > > >>>>>>>>>> . However, once the SQL syntax is finalized, we can discuss
> > this
> > > >>>> in
> > > >>>>> a
> > > >>>>>>>>>> separate FLIP. Currently, I have a rough idea: the Table API
> > > >>>> should
> > > >>>>>>>>>> also introduce
> > > >>>>>>>>>> DynamicTable operation interfaces
> > > >>>>>>>>>>    corresponding to the existing Table interfaces.
> > > >>>>>>>>>> The TableEnvironment
> > > >>>>>>>>>>    will provide relevant methods to support various dynamic
> > > table
> > > >>>>>>>>>> operations. The goal for the new Dynamic Table is to offer
> > users
> > > >>>> an
> > > >>>>>>>>>> experience similar to using a database, which is why we
> > > >>>> prioritize
> > > >>>>>>>>>> SQL-based approaches initially.
> > > >>>>>>>>>>
> > > >>>>>>>>>>> How do you envision re-adding the functionality of a
> > statement
> > > >>>> set,
> > > >>>>>>>>> that
> > > >>>>>>>>>>> fans out to multiple tables? This is a very important use
> > case
> > > >>>> for
> > > >>>>>>>> data
> > > >>>>>>>>>>> pipelines.
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>> Multi-tables is indeed a very important user scenario. In
> the
> > > >>>>> future,
> > > >>>>>>>>>> we can consider extending the statement set syntax to
> support
> > > the
> > > >>>>>>>>>> creation of multiple dynamic tables.
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>>> Since the early days of Flink SQL, we were discussing
> > `SELECT
> > > >>>>>>>> STREAM
> > > >>>>>>>>> *
> > > >>>>>>>>>>> FROM T EMIT 5 MINUTES`. Your proposal seems to rephrase
> > STREAM
> > > >>>> and
> > > >>>>>>>>> EMIT,
> > > >>>>>>>>>>> into other keywords DYNAMIC TABLE and FRESHNESS. But the
> core
> > > >>>>>>>>>>> functionality is still there. I'm wondering if we should
> > widen
> > > >>>> the
> > > >>>>>>>>> scope
> > > >>>>>>>>>>> (maybe not part of this FLIP but a new FLIP) to follow the
> > > >>>> standard
> > > >>>>>>>>> more
> > > >>>>>>>>>>> closely. Making `SELECT * FROM t` bounded by default and
> use
> > > new
> > > >>>>>>>> syntax
> > > >>>>>>>>>>> for the dynamic behavior. Flink 2.0 would be the perfect
> time
> > > >>>> for
> > > >>>>>>>> this,
> > > >>>>>>>>>>> however, it would require careful discussions. What do you
> > > >>>> think?
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>> The query part indeed requires a separate FLIP
> > > >>>>>>>>>> for discussion, as it involves changes to the default
> > behavior.
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>> [1]
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>
> > > >>>>>>
> > > >>>>>
> > > >>>>
> > >
> >
> https://urldefense.com/v3/__https://nightlies.apache.org/flink/flink-docs-master/docs/dev/table/concepts/dynamic_tables__;!!IKRxdwAv5BmarQ!dVYcp9PUyjpBGzkYFxb2sdnmB0E22koc-YLdxY2LidExEHUJKRkyvRbAveqjlYFKWevFvmE1Z-j73477_wHn$
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>> Best,
> > > >>>>>>>>>>
> > > >>>>>>>>>> Ron
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>> Jing Zhang <beyond1...@gmail.com> 于2024年3月13日周三 15:19写道:
> > > >>>>>>>>>>
> > > >>>>>>>>>>> Hi, Lincoln & Ron,
> > > >>>>>>>>>>>
> > > >>>>>>>>>>> Thanks for the proposal.
> > > >>>>>>>>>>>
> > > >>>>>>>>>>> I agree with the question raised by Timo.
> > > >>>>>>>>>>>
> > > >>>>>>>>>>> Besides, I have some other questions.
> > > >>>>>>>>>>> 1. How to define query of dynamic table?
> > > >>>>>>>>>>> Use flink sql or introducing new syntax?
> > > >>>>>>>>>>> If use flink sql, how to handle the difference in SQL
> between
> > > >>>>>>>> streaming
> > > >>>>>>>>>> and
> > > >>>>>>>>>>> batch processing?
> > > >>>>>>>>>>> For example, a query including window aggregate based on
> > > >>>> processing
> > > >>>>>>>>> time?
> > > >>>>>>>>>>> or a query including global order by?
> > > >>>>>>>>>>>
> > > >>>>>>>>>>> 2. Whether modify the query of dynamic table is allowed?
> > > >>>>>>>>>>> Or we could only refresh a dynamic table based on initial
> > > query?
> > > >>>>>>>>>>>
> > > >>>>>>>>>>> 3. How to use dynamic table?
> > > >>>>>>>>>>> The dynamic table seems to be similar with materialized
> view.
> > > >>>> Will
> > > >>>>>>>> we
> > > >>>>>>>>> do
> > > >>>>>>>>>>> something like materialized view rewriting during the
> > > >>>> optimization?
> > > >>>>>>>>>>>
> > > >>>>>>>>>>> Best,
> > > >>>>>>>>>>> Jing Zhang
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>
> > > >>>>>>>>>>> Timo Walther <twal...@apache.org> 于2024年3月13日周三 01:24写
> > > >>>>>>>>>>> 道:
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>> Hi Lincoln & Ron,
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>> thanks for proposing this FLIP. I think a design similar
> to
> > > >>>> what
> > > >>>>>>>> you
> > > >>>>>>>>>>>> propose has been in the heads of many people, however, I'm
> > > >>>>>>>> wondering
> > > >>>>>>>>>> how
> > > >>>>>>>>>>>> this will fit into the bigger picture.
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>> I haven't deeply reviewed the FLIP yet, but would like to
> > ask
> > > >>>> some
> > > >>>>>>>>>>>> initial questions:
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>> Flink has introduced the concept of Dynamic Tables many
> > years
> > > >>>> ago.
> > > >>>>>>>>> How
> > > >>>>>>>>>>>> does the term "Dynamic Table" fit into Flink's regular
> > tables
> > > >>>> and
> > > >>>>>>>>> also
> > > >>>>>>>>>>>> how does it relate to Table API?
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>> I fear that adding the DYNAMIC TABLE keyword could cause
> > > >>>> confusion
> > > >>>>>>>>> for
> > > >>>>>>>>>>>> users, because a term for regular CREATE TABLE (that can
> be
> > > >>>> "kind
> > > >>>>>>>> of
> > > >>>>>>>>>>>> dynamic" as well and is backed by a changelog) is then
> > > missing.
> > > >>>>>>>> Also
> > > >>>>>>>>>>>> given that we call our connectors for those tables,
> > > >>>>>>>>> DynamicTableSource
> > > >>>>>>>>>>>> and DynamicTableSink.
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>> In general, I find it contradicting that a TABLE can be
> > > >>>> "paused"
> > > >>>>> or
> > > >>>>>>>>>>>> "resumed". From an English language perspective, this does
> > > >>>> sound
> > > >>>>>>>>>>>> incorrect. In my opinion (without much research yet), a
> > > >>>> continuous
> > > >>>>>>>>>>>> updating trigger should rather be modelled as a CREATE
> > > >>>>> MATERIALIZED
> > > >>>>>>>>>> VIEW
> > > >>>>>>>>>>>> (which users are familiar with?) or a new concept such as
> a
> > > >>>> CREATE
> > > >>>>>>>>> TASK
> > > >>>>>>>>>>>> (that can be paused and resumed?).
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>> How do you envision re-adding the functionality of a
> > statement
> > > >>>>> set,
> > > >>>>>>>>>> that
> > > >>>>>>>>>>>> fans out to multiple tables? This is a very important use
> > case
> > > >>>> for
> > > >>>>>>>>> data
> > > >>>>>>>>>>>> pipelines.
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>> Since the early days of Flink SQL, we were discussing
> > `SELECT
> > > >>>>>>>> STREAM
> > > >>>>>>>>> *
> > > >>>>>>>>>>>> FROM T EMIT 5 MINUTES`. Your proposal seems to rephrase
> > STREAM
> > > >>>> and
> > > >>>>>>>>>> EMIT,
> > > >>>>>>>>>>>> into other keywords DYNAMIC TABLE and FRESHNESS. But the
> > core
> > > >>>>>>>>>>>> functionality is still there. I'm wondering if we should
> > widen
> > > >>>> the
> > > >>>>>>>>>> scope
> > > >>>>>>>>>>>> (maybe not part of this FLIP but a new FLIP) to follow the
> > > >>>>> standard
> > > >>>>>>>>>> more
> > > >>>>>>>>>>>> closely. Making `SELECT * FROM t` bounded by default and
> use
> > > >>>> new
> > > >>>>>>>>> syntax
> > > >>>>>>>>>>>> for the dynamic behavior. Flink 2.0 would be the perfect
> > time
> > > >>>> for
> > > >>>>>>>>> this,
> > > >>>>>>>>>>>> however, it would require careful discussions. What do you
> > > >>>> think?
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>> Regards,
> > > >>>>>>>>>>>> Timo
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>> On 11.03.24 08:23, Ron liu wrote:
> > > >>>>>>>>>>>>> Hi, Dev
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>> Lincoln Lee and I would like to start a discussion about
> > > >>>>>>>> FLIP-435:
> > > >>>>>>>>>>>>> Introduce a  New Dynamic Table for Simplifying Data
> > > Pipelines.
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>> This FLIP is designed to simplify the development of data
> > > >>>>>>>>> processing
> > > >>>>>>>>>>>>> pipelines. With Dynamic Tables with uniform SQL
> statements
> > > and
> > > >>>>>>>>>>>>> freshness, users can define batch and streaming
> > > >>>> transformations
> > > >>>>>>>> to
> > > >>>>>>>>>>>>> data in the same way, accelerate ETL pipeline
> development,
> > > and
> > > >>>>>>>>> manage
> > > >>>>>>>>>>>>> task scheduling automatically.
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>> For more details, see FLIP-435 [1]. Looking forward to
> your
> > > >>>>>>>>> feedback.
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>> [1]
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>> Best,
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>> Lincoln & Ron
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>
> > > >>>>>>
> > > >>>>>>
> > > >>>>>
> > > >>>>
> > > >>>
> > > >>
> > > >
> > >
> > >
> >
>

Reply via email to