hmmm...
now I'm wondering about my solutions to (1) and (2) - if more than one
node tries to join or leave at the same time I may be in trouble - so it
may be safer to go straight to (3) for all cases...
more thought needed :-)
Jules
Jules Gosnell wrote:
I've had a look at the Lampson paper, but didn't take it all in on the
first pass - I think it will need some serious concentration. The
Paxos algorithm looks interesting, I will definitely pursue this avenue.
I've also given a little thought to exactly why I need a Coordinator
and how Paxos might be used to replace it. My use of a Coordinator and
plans for its future do not actually seem that far from Paxos, on a
preliminary reading.
Given that WADI currently uses a distributed map of
sessionId:sessionLocation, that this distribution is achieved by
sharing out responsibility for the set number of buckets that comprise
the map roughly evenly between the cluster members and that this is
currently my most satisfying design, I can break my problem space (for
bucket arrangement) down into 3 basic cases :
1) Node joins
2) Node leaves in controlled fashion
3) Node dies
If the node under discussion is the only cluster member, then no
bucket rearrangement is necessary - this node will either create or
destroy the full set of buckets. I'll leave this set of subcases as
trivial.
1) The joining node will need to assume responsibility for a number
of buckets. If buckets-per-node is to be kept roughly the same for
every node, it is likely that the joining node will require transfer
of a small number of buckets from every current cluster member i.e. we
are starting a bucket rearrangement that will involve every cluster
member and only need be done if the join is successful. So, although
we wish to avoid an SPoF, if that SPoF turns out to be the joining
node, then I don't see it as a problem, If the node joining dies, then
we no longer have to worry about rearranging our buckets (unless we
have lost some that had already been transferred - see (3)). Thus the
joining node may be used as a single Coordinator/Leader for this
negotiation without fear of the SPoF problem. Are we on the same page
here ?
2) The same argument may be applied in reverse to a node leaving in a
controlled fashion. It will wish to evacuate its buckets roughly
equally to all remaining cluster members. If it shuts down cleanly,
this would form part of its shutdown protocol. If it dies before or
during the execution of this protocol then we are back at (3), if not,
then the SPoF issue may again be put to one side.
3) This is where things get tricky :-) Currently WADI has, for the
sake of simplicity, one single algorithm / thread / point-of-failure
which recalculates a complete bucket arrangement if it detects (1),
(2) or (3). It would be simple enough to offload the work done for (1)
and (2) to the node joining/leaving and this should reduce wadi's
current vulnerability, but we still need to deal with catastrophic
failure. Currently WADI rebuilds the missing buckets by querying the
cluster for the locations of any sessions that fall within them, but
it could equally carry a replicated backup and dust it off as part of
this procedure. It's just a trade-off between work done up front and
work done in exceptional circumstance... This is the place where the
Paxos algorithm may come in handy - bucet recomposition and
rearrangement. I need to give this further thought. For the immediate
future, however, I think WADI will stay with a single Coordinator in
this situation, which fails-over if http://activecluster.codehaus.org
says it should - I'm delegating the really thorny problem to James
:-). I agree with you that this is an SPoF and that WADI's ability to
recover from failure here depends directly on how we decide if a node
is alive or dead - a very tricky thing to do.
In conclusion then, I think that we have usefully identified a
weakness that will become more relevant as the rest of WADI's features
mature. The Lampson paper mentioned describes an algorithm for
allowing nodes to reach a consensus on actions to be performed, in a
redundant manner with no SPoF and I shall consider how this might
replace WADI's currently single Coordintor, whilst also looking at
performing other Coordination on joining/leaving nodes where its
failure, coinciding with that of its host node, will be irrelevant,
since the very condition that it was intended to resolve has ceased to
exist.
How does that sound, Andy ? Do you agree with my thoughts on (1) & (2)
? This is great input - thanks,
Jules
Jules Gosnell wrote:
Andy Piper wrote:
Hi Jules
At 05:37 AM 7/27/2005, Jules Gosnell wrote:
I agree on the SPoF thing - but I think you misunderstand my
Coordinator arch. I do not have a single static Coordinator node,
but a dynamic Coordinator role, into which a node may be elected.
Thus every node is a potential Coordinator. If the elected
Coordinator dies, another is immediately elected. The election
strategy is pluggable, although it will probably end up being
hardwired to "oldest-cluster-member". The reason behind this is
that relaying out your cluster is much simpler if it is done in a
single vm. I originally tried to do it in multiple vms, each taking
responsibility for pieces of the cluster, but if the vms views are
not completely in sync, things get very hairy, and completely in
sync is an expensive thing to achieve - and would introduce a
cluster-wide single point of contention. So I do it in a single vm,
as fast as I can, with fail over, in case that vm evaporates. Does
that sound better than the scenario that you had in mind ?
This is exactly the "hard" computer science problem that you
shouldn't be trying to solve if at all possible. Its hard because
network partitions or hung processes (think GC) make it very easy
for your colleagues to think you are dead when you do not share that
view. The result is two processes who think they are the coordinator
and anarchy can ensue (commonly called split-brain syndrome). I can
point you at papers if you want, but I really suggest that you aim
for an implementation that is independent of a central coordinator.
Note that a central coordinator is necessary if you want to
implement a strongly-consistent in-memory database, but this is not
usually a requirement for session replication say.
http://research.microsoft.com/Lampson/58-Consensus/Abstract.html
gives a good introduction to some of these things. I also presented
at JavaOne on related issues, you should be able to download the
presentation from dev2dev.bea.com at some point (not there yet - I
just checked).
OK - I will have a look at these papers and reconsider... perhaps I
can come up with some sort of fractal algorithm which recursively
breaks down the cluster into subclusters each of which is capable of
doing likewise to itself and then layout the buckets recursively via
this metaphor... - this would be much more robust, as you point out,
but, I think, a more complicated architecture. I will give it some
serious thought. Have you any suggestions/papers as to how you might
do something like this in a distributed manner, bearing in mind that
as a node joins, some existing nodes will see it as having joined and
some will not yet have noticed and vice-versa on leaving....
The Coordinator is not there to support session replication, but
rather the management of the distributed map (map of which a few
buckets live on each node) which is used by WADI to discover very
efficiently whether a session exists and where it is located. This
map must be rearranged, in the most efficient way possible, each
time a node joins or leaves the cluster.
Understood. Once you have a fault-tolerant singleton coordinator you
can solve lots of interesting problems, its just hard and often not
worth the effort or the expense (typical implementations involve HA
HW or an HA DB or at least 3 server processes).
Since I am only currently using the singleton coordinator for bucket
arrangement, I may just live with it for the moment, in order to move
forward, but make a note to replace it and start background threads
on how that might be achieved...
Replication is NYI - but I'm running a few mental background
threads that suggest that an extension to the index will mean that
it associates the session's id not just to its current location,
but also to the location of a number of replicants. I also have
ideas on how a session might choose nodes into which it will place
its replicants and how I can avoid the primary session copy ever
being colocated with a replicant (potential SPoF - if you only have
one replicant), etc...
Right definitely something you want to avoid.
Yes, I can see that happening - I have an improvement (NYI) to
WADI's evacuation strategy (how sessions are evacuated when a node
wishes to leave). Each session will be evacuated to the node which
owns the bucket into which its id hashes. This is because
colocation of the session with the bucket allows many messages
concered with its future destruction and relocation to be optimised
away. Future requests falling elsewhere but needing this session
should, in the most efficient case, be relocated to this same node,
other wise the session may be relocated, but at a cost...
How do you relocate the request? Many HW load-balancers do not
support this (or else it requires using proprietary APIs), so you
probably have to count on
moving sessions in the normal failover case.
If I can squeeze the behaviour that I require out of the
load-balancer, then, depending on the request type I may be able to
get away with a redirection with a changed session cookie or url
param, or, failing this an http-proxy, across from a filter above the
servlet on one side to the http-port on the node that owns the
session...
The LB-integration object is pluggable and the aim is to supply wadi
with a good selection of LB integrations - currently I only have a
ModJK[2] plugin working. This is able to 'restick' clients to their
session's new location (although messing with the session id is a
little dodgy...).
I would be very grateful in any thoughts or feedback that you could
give me. I hope to get much more information about WADI into the
wiki over the next few weeks. That should help generate more
discussion, although I would be more than happy for people to ask
me questions here on Geronimo-dev because this will give me an idea
of what documentation I should write and how existing documentation
may be lacking or misleading.
I guess my general comment would be that you might find it better to
think specifically about the end-user problem you are trying to
solve (say session replication) and work towards a solution based on
that. Most short-cuts / optimizations that vendors make are specific
to the problem domain and do not generally apply to all clustering
problems.
The end problem is really clustered web and ejb sessions at the
moment, although it looks as if by the time we have solved these
issues we may well have written a fault-tolerant
distributed/partitioned index that might be very useful as a generic
distributed cache building block.
One thing that I do want wadi to do, is to still work when
replication is switched off. i.e., if a session only exists as a
primary copy, even if affinity breaks down, wadi will continue to
correctly render requests for that session unless some form of
catastrophic failure causes the session to evaporate. This means that
I need to ensure the session's timely evacuation from a node that
chooses to leave the cluster to a remaining node, so that it may
remain active beyond the lifetime of its original node. All of this
must work flawlessly under stress, so that an admin may add or remove
nodes to a running cluster without having to worry about the user
state that it is managing. Nodes are added by simply starting them,
and nodes removed via e.g. ctl-c-ing them.
If it is decided that a few more nines are needed in terms of session
availability and the cluster owner understands the extra cost
involved in in-vm replication in terms of extra hardware and
bandwidth that they will have to purchase and is happy to go with
in-vm-replication, then it should be sufficient to up the number of
replicated copies kept by the cluster from '0' to e.g. '2' and
restart (It might even be possible to vary this setting on a node to
node basis so that this change does not even involve a complete
cluster cold start). WADI should deal with the rest.
So, I believe that I have a pretty clear idea of what WADI will do,
and aside from the replication stuff (phase2) it currently does most
of what iIhad in mind for phase1, except that it is not yet happy
under stress. I figure it will probably take one or two more
redesign/reimplementation iterations to get it to this stage, then I
can consider replication.
I have spoken to members of the OpenEJB team about wadi's ability to
relocate requests as well as sessions and we came to the conclusion
that it was just as applicable in the EJB world as the web world. If
the node an ejb client is talking to leaves the cluster in between
calls, the client may try to contact it and then failover to another
node that it hopes holds the session. If, due to other nodes
leaving/joining it is not always clear which node will contain the
session, the ability to reply to an RMI and just say "not here -
there!" - i.e. an rmi redirection - would not be hard to add and
would resolve this situation. Transactions are another item which I
have marked phase2.
So, I am trying hard to stay very focussed on the problem domain,
otherwise this will never get finished :-)
Right, off to read those papers now - thanks for your posting and
your interest,
Jules
Hope this helps
andy
--
"Open Source is a self-assembling organism. You dangle a piece of
string into a super-saturated solution and a whole operating-system
crystallises out around it."
/**********************************
* Jules Gosnell
* Partner
* Core Developers Network (Europe)
*
* www.coredevelopers.net
*
* Open Source Training & Support.
**********************************/