Any JIRA issue?
On Tue, Mar 11, 2008 at 5:33 AM, Simon Chow <[EMAIL PROTECTED]> wrote:
> After some struggle, I have built harmony successfully using
> VS.net2005compiler.
> The following modification should be performed both in the configuration
> files and source files.
> 1, in working_classlib
> depends\build\defines.mak
> change
> 36 !ELSE
> 37 WARNING_LEVEL=WX
> 38 !ENDIF
> to
> 36 !ELSE
> 37 WARNING_LEVEL=W3
> 38 !ENDIF
>
> 2, in working_vm
> (1) make\vm\common-vm.xml
> insert
> <compilerarg value="/wd4005" if="is.msvc"/>
> <compilerarg value="/wd4996" if="is.msvc" />
> <compilerarg value="/wd4047" if="is.msvc" />
> <compilerarg value="/wd4024" if="is.msvc" />
> <compilerarg value="/wd4819" if="is.msvc" />
> <compilerarg value="/wd4005" if="is.msvc"/>
> after
> 62 <compilerarg value="/Zi" if="is.windows"/>
> 63 <compilerarg value="/W3" if="is.windows"/>
> 64 <compilerarg value="/WX" if="is.windows" unless="is.x86_64"/>
>
> (2) working_vm\vm\include\open\hythread.h, hythread_ext.h
> modify (take 'include' out of 'extern "C"')
> #if defined(__cplusplus)
> extern "C" {
> #endif
> #include <open/types.h>
>
> #include <stddef.h>
> #include "hycomp.h"
>
> #ifdef _WIN32
> # if (_MSC_VER >= 1400)
> # include <intrin.h>
> # endif
> #endif
> to
> #include <open/types.h>
>
> #include <stddef.h>
> #include "hycomp.h"
>
> #ifdef _WIN32
> # if (_MSC_VER >= 1400)
> # include <intrin.h>
> # endif
> #endif
>
> #if defined(__cplusplus)
> extern "C" {
> #endif
>
> For hythread_ext.h, similar operation should be performed.
>
>
>
>
>
> On 06/03/2008, Aleksey Shipilev <[EMAIL PROTECTED]> wrote:
> >
>
>
> > Hi,
> >
> > The problem here is warning that are treated as error, right. You can
> > probably try to suppress these warnings by listing their codes in
> > corresponding make/vm/*.xml. This is part of make/vm/jitrino.xml for
> > ICL compiler warning suppression:
> >
> > ---- CUT ----
> > <compilerarg value="/Qvec_report0" if="is.icl"
> > unless="is.cfg.debug"/>
> > <compilerarg
> > value="/Qww1,82,111,172,181,279,280,373,424,593,654,858" if="is.icl"/>
> > <compilerarg
> >
> >
> value="/Qwd82,193,271,304,373,383,424,444,654,869,981,1125,1418,1419,1572,1683"
> > if="is.icl"/>
> > <!--
> > # /Qwd[tag,...] Disable the soft diagnostics
> > that corresponds to tag.
> > # /Qwr[tag,...] Override the severity of the
> > soft diagnostics corresponding to tag and make it a remark.
> > # /Qww[tag,...] Override the severity of the
> > soft diagnostics corresponding to tag and make it a warning.
> > # /Qwe[tag,...] Override the severity of the
> > soft diagnostics corresponding to tag and make it an error.
> > ---- CUT ----
> >
> > You may try to fix problem you describing in this way. Please report
> > back if it work for you :)
> >
> > Thanks,
> >
> > Aleksey.
> >
> >
> > On Thu, Mar 6, 2008 at 11:47 AM, liaoyin <[EMAIL PROTECTED]> wrote:
> > > I think this website can explain these problem.
> > >
> >
> http://www.manticmoo.com/articles/jeff/programming/visual-c++/suppressing-deprecation-warnings.php
> > >
> > > I suggest that you'd better use the vc 2003.ok
> > >
> > > Suppressing deprecation warnings when upgrading to Visual Studio 2005
> > by
> > > Jeffrey P. Bigham
> > >
> > > I was recently tasked with migrating a simple, internal application
> > from
> > > VS2003 to VS2005. You would think this would be really simple, and it
> > really
> > > wasn't that hard, but there are a few gotcha's that you have to watch
> > out
> > > for when doing so.
> > >
> > > In its infinite wisdom Microsoft decided that as of Visual Studio 2005,
> > > basically all of the standard C functions dealing with strings that
> > rely on
> > > an ending NULL character and not a specified length would be
> > deprecated.
> > > This means that strcpy, sprintf and strlen are all deprecated to name
> > just a
> > > few. In some respects this is a good thing because it might help to
> > convince
> > > programmers to use the more secure variations of these standard
> > functions,
> > > but, unfortunately, it also causes applications that used to compile
> > cleanly
> > > to issue thousands of warnings. Futhermore, switching to the more
> > secure
> > > variations of the functions isn't always trivially because to use them
> > you
> > > must know the length of the buffers, which might not be easily
> > accessible in
> > > many programs not designed for it. And, not to mention, if you use the
> > > secure functions you give up all hope of being able to compile your C++
> > code
> > > in Unix.
> > > Avoidance by Suppression
> > >
> > > There may be a better way of getting rid of these warning, but until
> > there
> > > is I'm just going to suppress them. I want to be as particular as
> > possible
> > > with the warnings that I suppress to make sure that I'm not suppressing
> > > something useful. Therefore, I picked out the particular warning code
> > > associated with these warnings, code 4996, and suppress only warnings
> > of
> > > that type.
> > >
> > > To suppress these warnings simply add the following compiler directive:
> > >
> > > /wd4996
> > >
> > > to your commandline options.
> > >
> > > In Visual Studio this can be found in the Properties of your project,
> > under
> > > C/C++, in the Commandline option.
> > > List of newly deprecated functions in VS2005 and their secure
> > alternative *
> > > Function**Secure Alternative* access_access, _access_s cabs_cabs
> > cgets_cgets,
> > > _cgets_s chdir_chdir chmod_chmod chsize_chsize, _chsize_s close_close
> > > cprintf_cprintf, _cprintf_s cputs_cputs creat_creat cscanf_cscanf,
> > _cscanf_s
> > > cwait_cwait dup_dup dup2_dup2 ecvt_ecvt, _ecvt_s eof_eof execl_execl
> > execle
> > > _execle execlp_execlp execlpe_execlpe execv_execv execve_execve execvp
> > > _execvp execvpe_execvpe fcloseall_fcloseall fcvt_fcvt, _fcvt_s
> > fdopen_fdopen
> > > fgetchar_fgetchar filelength_filelength fileno_fileno flushall_flushall
> > > fputchar_fputchar, _fputwchar gcvt_gcvt, _gcvt_s getch_getch
> > getche_getche
> > > getcwd_getcwd, _wgetcwd getpid_getpid getw_getw hypot_hypot inp_inp
> > inpw
> > > _inpw isascii__isascii isatty_isatty iscsym__iscsym iscsymf__iscsymf
> > itoa_itoa,
> > > _itoa_s j0_j0 j1_j1 jn_jn kbhit_kbhit lfind_lfind, _lfind_s
> > locking_locking
> > > lsearch_lsearch, _lsearch_s lseek_lseek ltoa_ltoa, _ltoa_s
> > memccpy_memccpy
> > > memicmp_memicmp mkdir_mkdir mktemp_mktemp, _mktemp_s open_open
> > outp_outp
> > > outpw_outpw putch_putch putenv_putenv, _putenv_s putw_putw read_read
> > rmdir
> > > _rmdir rmtmp_rmtmp setmode_setmode sopen_sopen, _sopen_s spawnl_spawnl
> > > spawnle_spawnle spawnlp_spawnlp spawnlpe_spawnlpe spawnv_spawnv spawnve
> > > _spawnve spawnvp_spawnvp spawnvpe_spawnvpe strcmpi_stricmp
> > strdup_strdup
> > > stricmp_stricmp strlwr_strlwr, _strlwr_s strnicmp_strnicmp
> > strnset_strnset,
> > > _strnset_s strrev_strrev strset_strset, _strset_s strupr_strupr,
> > _strupr_s
> > > swab_swab tell_tell tempnam_tempnam toascii__toascii tzset_tzset
> > ultoa_ultoa,
> > > _ultoa_s umask_umask, _umask_s ungetch_ungetch unlink_unlink
> > wcsdup_wcsdup
> > > wcsicmp_wcsicmp wcsicoll_wcsicoll wcslwr_wcslwr, _wcslwr_s
> > wcsnicmp_wcsnicmp
> > > wcsnset_wcsnset, _wcsnset_s wcsrev_wcsrev wcsset_wcsset, _wcsset_s
> > > wcsupr_wcsupr,
> > > _wcsupr_s write_write y0_y0 y1_y1 yn_yn
> > >
> > > 2008/3/6, Simon Chow <[EMAIL PROTECTED]>:
> > >
> > >
> > > >
> > > > I want to build a svn latest version on Windows, but this error
> > occurs.
> > > > How to deal with it?
> > > >
> > > > build:
> > > > [echo] ## Building 'encoder'
> > > > [mkdir] Created dir:
> > > > D:\Developing\JOpen64\Harmony\Code\trunk\working_vm\bui
> > > > ld\windows_x86_msvc_debug\semis\encoder\bin
> > > > [mkdir] Created dir:
> > > > D:\Developing\JOpen64\Harmony\Code\trunk\working_vm\bui
> > > > ld\windows_x86_msvc_debug\semis\encoder\obj
> > > >
> > > > [cc] 4 total files to be compiled.
> > > > [cc] cl : Command line warning D9035 : option 'GZ' has been
> > > > deprecated an
> > > > d will be removed in a future release
> > > > [cc] cl : Command line warning D9036 : use 'RTC1' instead of
> > 'GZ'
> > > > [cc] encoder.cpp
> > > > [cc] enc_tabl.cpp
> > > > [cc] enc_base.cpp
> > > > [cc]
> > > > D:\Developing\JOpen64\Harmony\Code\trunk\working_vm\vm\port\src\enco
> > > > der\ia32_em64t\enc_base.cpp(771) : error C2220: warning treated as
> > error -
> > > > no 'o
> > > > bject' file generated
> > > > [cc]
> > > > D:\Developing\JOpen64\Harmony\Code\trunk\working_vm\vm\port\src\enco
> > > > der\ia32_em64t\enc_base.cpp(771) : warning C4996: 'strcmpi' was
> > declared
> > > > depreca
> > > > ted
> > > > [cc] C:\Program Files\Microsoft Visual Studio
> > > > 8\VC\INCLUDE\string
> > > > .h(212) : see declaration of 'strcmpi'
> > > > [cc] Message: 'The POSIX name for this item is
> > deprecated.
> > > > Instea
> > > > d, use the ISO C++ conformant name: _strcmpi. See online help for
> > > > details.'
> > > > [cc]
> > > > D:\Developing\JOpen64\Harmony\Code\trunk\working_vm\vm\port\src\enco
> > > > der\ia32_em64t\enc_base.cpp(823) : warning C4996: 'strcmpi' was
> > declared
> > > > depreca
> > > > ted
> > > > [cc] C:\Program Files\Microsoft Visual Studio
> > > > 8\VC\INCLUDE\string
> > > > .h(212) : see declaration of 'strcmpi'
> > > > [cc] Message: 'The POSIX name for this item is
> > deprecated.
> > > > Instea
> > > > d, use the ISO C++ conformant name: _strcmpi. See online help for
> > > > details.'
> > > > [cc]
> > > > D:\Developing\JOpen64\Harmony\Code\trunk\working_vm\vm\port\src\enco
> > > > der\ia32_em64t\enc_base.cpp(873) : warning C4996: 'strcmpi' was
> > declared
> > > > depreca
> > > > ted
> > > > [cc] C:\Program Files\Microsoft Visual Studio
> > > > 8\VC\INCLUDE\string
> > > > .h(212) : see declaration of 'strcmpi'
> > > > [cc] Message: 'The POSIX name for this item is
> > deprecated.
> > > > Instea
> > > > d, use the ISO C++ conformant name: _strcmpi. See online help for
> > > > details.'
> > > > [cc]
> > > > D:\Developing\JOpen64\Harmony\Code\trunk\working_vm\vm\port\src\enco
> > > > der\ia32_em64t\enc_base.cpp(1073) : warning C4996: 'strcmpi' was
> > declared
> > > > deprec
> > > > ated
> > > > [cc] C:\Program Files\Microsoft Visual Studio
> > > > 8\VC\INCLUDE\string
> > > > .h(212) : see declaration of 'strcmpi'
> > > > [cc] Message: 'The POSIX name for this item is
> > deprecated.
> > > > Instea
> > > > d, use the ISO C++ conformant name: _strcmpi. See online help for
> > > > details.'
> > > > [cc] dec_base.cpp
> > > > [cc] Generating Code...
> > > >
> > > > BUILD FAILED
> > > > D:\Developing\JOpen64\Harmony\Code\trunk\working_vm\build.xml:121:
> > The
> > > > following
> > > > error occurred while executing this line:
> > > >
> > > >
> > D:\Developing\JOpen64\Harmony\Code\trunk\working_vm\make\vm\encoder.xml:32:
> > > > The
> > > > following error occurred while executing this line:
> > > > D:\Developing\JOpen64\Harmony\Code\trunk\working_vm\make\build-
> > native.xml
> > > > :196:
> > > > c
> > > > l failed with return code 2
> > > >
> > > > Total time: 16 seconds
> > > >
> > > >
> > > > --
> > > > From : [EMAIL PROTECTED] School of Fudan University
> > > >
> > >
> >
>
>
>
> --
>
>
> From : [EMAIL PROTECTED] School of Fudan University
>
