in the mean time, memcached could provide all those benefits without adding any complexity to hbase...
On Wed, Apr 4, 2012 at 2:46 PM, Matt Corgan <[email protected]> wrote: > It could act like a HashSet of KeyValues keyed on the > rowKey+family+qualifier but not including the timestamp. As writes come in > it would evict or overwrite previous versions (read-through vs > write-through). It would only service point queries where the > row+fam+qualifier are specified, returning the latest version. Wouldn't be > able to do a typical rowKey-only Get (scan behind the scenes) because it > wouldn't know if it contained all the cells in the row, but if you could > specify all your row's qualifiers up-front it could work. > > > On Wed, Apr 4, 2012 at 2:30 PM, Vladimir Rodionov <[email protected] > > wrote: > >> 1. 2KB can be too large for some applications. For example, some of our >> k-v sizes < 100 bytes combined. >> 2. These tables (from 1.) do not benefit from block cache at all (we did >> not try 100 B block size yet :) >> 3. And Matt is absolutely right: small block size is expensive >> >> How about doing point queries on K-V cache and bypass K-V cache on all >> Scans (when someone really need this)? >> Implement K-V cache as a coprocessor application? >> >> Invalidation of K-V entry is not necessary if all upserts operations go >> through K-V cache firstly if it sits in front of MemStore. >> There will be no "stale or invalid" data situation in this case. Correct? >> No need for data to be sorted and no need for data to be merged >> into a scan (we do not use K-V cache for Scans) >> >> >> Best regards, >> Vladimir Rodionov >> Principal Platform Engineer >> Carrier IQ, www.carrieriq.com >> e-mail: [email protected] >> >> ________________________________________ >> From: Matt Corgan [[email protected]] >> Sent: Wednesday, April 04, 2012 11:40 AM >> To: [email protected] >> Subject: Re: keyvalue cache >> >> I guess the benefit of the KV cache is that you are not holding entire 64K >> blocks in memory when you only care about 200 bytes of them. Would an >> alternative be to set a small block size (2KB or less)? >> >> The problems with small block sizes would be expensive block cache >> management overhead and inefficient scanning IO due to lack of read-ahead. >> Maybe improving the cache management and read-ahead would be more general >> improvements that don't add as much complexity? >> >> I'm having a hard time envisioning how you would do invalidations on the >> KV >> cache and how you would merge its entries into a scan, etc. Would it >> basically be a memstore in front of the memstore where KVs get >> individually >> invalidated instead of bulk-flushed? Would it be sorted or hashed? >> >> Matt >> >> On Wed, Apr 4, 2012 at 10:35 AM, Enis Söztutar <[email protected]> wrote: >> >> > As you said, caching the entire row does not make much sense, given that >> > the families are by contract the access boundaries. But caching column >> > families might be a good trade of for dealing with the per-item >> overhead. >> > >> > Also agreed on cache being configurable at the table or better cf >> level. I >> > think we can do something like enable_block_cache = true, >> > enable_kv_cache=false, per column family. >> > >> > Enis >> > >> > On Tue, Apr 3, 2012 at 11:03 PM, Vladimir Rodionov >> > <[email protected]>wrote: >> > >> > > Usually make sense for tables with random mostly access (point >> queries) >> > > For short-long scans block cache is preferable. >> > > Cassandra has it (Row cache) but as since they cache the whole row >> (which >> > > can be very large) in many cases >> > > it has sub par performance. Make sense to make caching configurable: >> > table >> > > can use key-value cache and do not use block cache >> > > and vice verse. >> > > >> > > Best regards, >> > > Vladimir Rodionov >> > > Principal Platform Engineer >> > > Carrier IQ, www.carrieriq.com >> > > e-mail: [email protected] >> > > >> > > ________________________________________ >> > > From: Enis Söztutar [[email protected]] >> > > Sent: Tuesday, April 03, 2012 3:34 PM >> > > To: [email protected] >> > > Subject: keyvalue cache >> > > >> > > Hi, >> > > >> > > Before opening the issue, I though I should ask around first. What do >> you >> > > think about a keyvalue cache sitting on top of the block cache? It is >> > > mentioned in the big table paper, and it seems that zipfian kv access >> > > patterns might benefit from something like this a lot. I could not >> find >> > > anybody who proposed that before. >> > > >> > > What do you guys think? Should we pursue a kv query-cache. My gut >> feeling >> > > says that especially for some workloads we might gain significant >> > > performance improvements, but we cannot verify it, until we implement >> and >> > > profile it, right? >> > > >> > > Thanks, >> > > Enis >> > > >> > > Confidentiality Notice: The information contained in this message, >> > > including any attachments hereto, may be confidential and is intended >> to >> > be >> > > read only by the individual or entity to whom this message is >> addressed. >> > If >> > > the reader of this message is not the intended recipient or an agent >> or >> > > designee of the intended recipient, please note that any review, use, >> > > disclosure or distribution of this message or its attachments, in any >> > form, >> > > is strictly prohibited. If you have received this message in error, >> > please >> > > immediately notify the sender and/or [email protected] and >> > > delete or destroy any copy of this message and its attachments. >> > > >> > >> >> Confidentiality Notice: The information contained in this message, >> including any attachments hereto, may be confidential and is intended to be >> read only by the individual or entity to whom this message is addressed. If >> the reader of this message is not the intended recipient or an agent or >> designee of the intended recipient, please note that any review, use, >> disclosure or distribution of this message or its attachments, in any form, >> is strictly prohibited. If you have received this message in error, please >> immediately notify the sender and/or [email protected] and >> delete or destroy any copy of this message and its attachments. >> > >
