I get a test failure for 2.4.17 in the mod_nntp_like_ssl part. Te
failure happens on Solaris. Note that the nntp tests are disabled by
default on Linux because of problems with the kernel accept filter, so
that many of you wont run this test and thus not observe the problem.
The problems is that the test hangs after test 1 when waiting for the
result of 2. On Solaris 8 the behavior changes a bit, there test 2
succeeds, but 3-5 receive an empty result. The difference might be due
to slight perl test differences. I suspect a common root cause.
Maybe the problem is due to some unclean brigade handling in
mod_nntp_like_ssl (in light of recent dev list discussions)? Or
mod_http2 is simply incompatible with mod_nntp_like_ssl and we should
disable that test if mod_http2 is loaded?
Trace 8 log comparison between good runs (without having mod_http2
loaded) and bad runs (having mod_http2 loaded):
Good run (no mod_http2)
- end of handshake and immediately write 52 bytes
[Sun Oct 11 14:53:47.911105 2015] [ssl:trace3] [pid 23096:tid 27]
ssl_engine_kernel.c(1810): [client 127.0.0.1:50990] OpenSSL: Handshake: done
[Sun Oct 11 14:53:47.911142 2015] [ssl:debug] [pid 23096:tid 27]
ssl_engine_kernel.c(1855): [client 127.0.0.1:50990] AH02041: Protocol:
TLSv1.2, Cipher: ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)
[Sun Oct 11 14:53:47.911212 2015] [ssl:trace4] [pid 23096:tid 27]
ssl_engine_io.c(2088): [client 127.0.0.1:50990] OpenSSL: write 52/52
bytes to BIO#2861b8 [mem: 2bd45b] (BIO dump follows)
Bad run (including mod_http2)
- end of handshake
[Sun Oct 11 14:54:38.550476 2015] [ssl:trace3] [pid 23133:tid 50]
ssl_engine_kernel.c(1810): [client 127.0.0.1:50994] OpenSSL: Handshake: done
[Sun Oct 11 14:54:38.550520 2015] [ssl:debug] [pid 23133:tid 50]
ssl_engine_kernel.c(1855): [client 127.0.0.1:50994] AH02041: Protocol:
TLSv1.2, Cipher: ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)
[Sun Oct 11 14:54:38.550555 2015] [core:trace6] [pid 23133:tid 50]
core_filters.c(523): [client 127.0.0.1:50994] core_output_filter:
flushing because of FLUSH bucket
- one minute established connection, but nothing else
[Sun Oct 11 14:54:39.274796 2015] [mpm_event:trace6] [pid 23133:tid 53]
event.c(1577): connections: 1 (clogged: 0 write-completion: 0
keep-alive: 0 lingering: 0 suspended: 0)
...
- timeout after one minute and write 52 bytes
[Sun Oct 11 14:55:38.551174 2015] [ssl:trace4] [pid 23133:tid 50]
ssl_engine_io.c(2099): [client 127.0.0.1:50994] OpenSSL: I/O error, 5
bytes expected to read on BIO#273480 [mem: 3624e3]
[Sun Oct 11 14:55:38.551253 2015] [ssl:info] [pid 23133:tid 50]
(70007)The timeout specified has expired: [client 127.0.0.1:50994]
AH01991: SSL input filter read failed.
[Sun Oct 11 14:55:38.551316 2015] [http2:debug] [pid 23133:tid 50]
h2_h2.c(189): (70007)The timeout specified has expired: [client
127.0.0.1:50994] h2_h2, error reading 24 bytes speculative
[Sun Oct 11 14:55:38.551344 2015] [http2:trace1] [pid 23133:tid 50]
h2_h2.c(205): [client 127.0.0.1:50994] h2_h2, declined
[Sun Oct 11 14:55:38.551433 2015] [ssl:trace4] [pid 23133:tid 50]
ssl_engine_io.c(2088): [client 127.0.0.1:50994] OpenSSL: write 52/52
bytes to BIO#282488 [mem: 36a633] (BIO dump follows)
Regards,
Rainer
