Well, if the customer could reproduce this at a LogLevel http2:trace2
that would help. > Am 25.07.2017 um 15:38 schrieb Stefan Priebe - Profihost AG > <s.pri...@profihost.ag>: > > Hello Stefan, > > thanks for the patch. No it does not solve the problem our customer is > seeing. > > What kind of details / logs you need? > > Greets, > Stefan > > Am 25.07.2017 um 11:59 schrieb Stefan Eissing: >> The issue was opened here: https://github.com/icing/mod_h2/issues/143 >> >> I made a patch that i hope addresses the problem. The 2.4.x version I attach >> to this mail. >> >> Thanks! >> >> Stefan >> >> >> >> >> >>> Am 25.07.2017 um 08:13 schrieb Stefan Priebe - Profihost AG >>> <s.pri...@profihost.ag>: >>> >>> >>> Am 24.07.2017 um 23:06 schrieb Stefan Eissing: >>>> I have another report of request getting stuck, resulting in the error you >>>> noticed. Will look tomorrow and report back here what I find. >>> >>> Thanks, if you need any logs. Pleae ask. >>> >>> Stefan >>> >>>> >>>>> Am 24.07.2017 um 22:20 schrieb Stefan Priebe - Profihost AG >>>>> <s.pri...@profihost.ag>: >>>>> >>>>> Hello all, >>>>> >>>>> currently 8 hours of testing without any issues. >>>>> >>>>> @Stefan >>>>> i've most probably another issue with http2 where some elements of the >>>>> page are sometimes missing and the connection results in >>>>> ERR_CONNECTION_CLOSED after 60s. What kind of details do you need? >>>>> >>>>> Greets, >>>>> Stefan >>>>>> Am 22.07.2017 um 13:35 schrieb Yann Ylavic: >>>>>>> On Sat, Jul 22, 2017 at 2:18 AM, Yann Ylavic <ylavic....@gmail.com> >>>>>>> wrote: >>>>>>> On Fri, Jul 21, 2017 at 10:31 PM, Stefan Priebe - Profihost AG >>>>>>> <s.pri...@profihost.ag> wrote: >>>>>>>> >>>>>>>> your new defer linger V3 deadlocked as well. >>>>>>>> >>>>>>>> GDB traces: >>>>>>>> https://www.apaste.info/LMfJ >>>>>>> >>>>>>> This shows the listener thread waiting for a worker while there are >>>>>>> many available. >>>>>>> My mistake, the worker threads failed to rearm their idle state for >>>>>>> the deferred close case. >>>>>>> >>>>>>> V4 available, thanks Stefan! >>>>>> >>>>>> Since I didn't want you to test again something that fails quickly, I >>>>>> did some stress tests myself this time with several tools, with V5 >>>>>> (same as V4 from a 2.4.x POV). >>>>>> >>>>>> It seems to work well here... >>>>>> >>>>>>> Regards, >>>>>>> Yann. >>>> >>
