Hi, Yes this is what I meant.
Julian Von meinem Mobiltelefon gesendet -------- Ursprüngliche Nachricht -------- Betreff: Re: Operation and robustness of iotDB Von: 徐毅 An: dev@iotdb.apache.org Cc: Hi, In the definition of ChunkGroup, what is the meaning of 'share one time signal'? Do these measurements share same timestamps? Thanks XuYi On 3/8/2019 01:11,Julian Feinauer<j.feina...@pragmaticminds.de> wrote: Hey Xiangdong, hey all, I like the documentation much. The only thing I'm a bit unsure is about the names (as there is no clarification). So, before I update it with any wrong information I would like to ensure that I have the correct understanding. I assume that most naming is similar to Parquet. Page - Contains one Measurement, smallest source of compression Chunk - Collection of multiple Pages, still one measurement ChunkGroup - Collection of chunks of which share one time signal (one Chunk for each measurement) Is this correct so? Julian Am 05.03.19, 12:26 schrieb "Xiangdong Huang" <saint...@gmail.com>: Hi, 1. We have a document to introduce that: https://cwiki.apache.org/confluence/display/IOTDB/TsFile+Format 2. The new API for recovering data is almost done. I am writing the UTs now. Maybe I can submit a PR tonight (if everything is fine...) Best, ----------------------------------- Xiangdong Huang School of Software, Tsinghua University 黄向东 清华大学 软件学院 Julian Feinauer <j.feina...@pragmaticminds.de> 于2019年3月5日周二 下午6:00写道: Hi Xiangdong, that sounds excellent. Do you have a short overview of how the file format is designed on disk? I know that its somewhat similar to parquet but I did not find more details. Basically what would suffice for us would be something like skipping an invalid column group (or how you name it) and go on with the next, or so. Julian Am 04.03.19, 13:21 schrieb "Xiangdong Huang" <saint...@gmail.com>: Hi, If so, I think I need to add a new API to allow you continue to write data in an existing but not closed correctly TsFile. Then everything is fine for you :D Best, ----------------------------------- Xiangdong Huang School of Software, Tsinghua University 黄向东 清华大学 软件学院 Julian Feinauer <j.feina...@pragmaticminds.de> 于2019年3月4日周一 下午8:08写道: Hey Xiangdong, thanks for the great explanation. And in fact, I agree with you that it would be best if we start to play around with it and reply all our findings or wishes back to this list (in fact that proved to be beneficial in plc4x as well). You confirm my thoughts about the two "levels" of APIs (DB and file) and the file api is exactly what we looked for for our use case. As we do not care much about data loss (when an edge device fails its... gone). The crucial point for us is that no corrupt files can be generated. This means I'm fine when the last data submitted is lost but I'm not fine if we can get to a situation where the last datafile is completely lost (well, perhaps this could be acceptable). @tim: Perhaps its best when you give some more information to Xiangdong about our idea, and we can also point to our current code in github Julian Am 04.03.19, 13:03 schrieb "Xiangdong Huang" <saint...@gmail.com>: Hi, TsFile API is not deprecated. In fact, it is designed for this scenario and MapReduce/Spark computing. If you just use Reader and Writer API, there is something you need to know: Let's suppose your block size is x Bytes, (tsfile-format.properties: group_size_in_byte). 1. If you write data and a shutdown occurs, then all data that is flushed on disk is ok, and you can read the data ( class org.apache.iotdb.tsfile.TsFileSequenceRead is an example, but you need to change it a little. I think I can write an example.) 2. Actually, TsFile has the ability to allow you continue to write data at the end of the incomplete file. However, We do not provide this API now... If needed, I can add the API. 3. In this scenario, you will lose at most x Bytes data. If you do not accept that, something like WAL is needed. (It is not very complex, but I am not sure that whether it should be an embedded function for TsFile). Up to now, we can consider that TsFile API is suitable for your scenario (even though we need to add a little more API if you desire). And you can get the ability to compress data, and query data from the TsFile rather than scan the data from the head to the tail. However, TsFile has one constraint: You can not write out-of-order data into a TsFile, otherwise the query API may return incomplete result. But I think it is ok for real applications, because I do not think that a device can generate out-of-order data.... For example, If you write two devices' data into one TsFile, it is ok if you write data like: - d1.t1, d1.t2, d2.t1, d2.t2, d2.t3, d1.t4, d1.t5 .... or: - d1.m1.t1, d1.m1.t2, d1.m2.t1, d1.m2.t2, d2.m1.t1 ... But you can not write data like: - d1.m1.t2, d1.m1.t1 ... I think it is a good chance to improve TsFile to make it more suitable for real applications, so please do not hesitate to tell me more about what you think TsFile should want to have? Best, ----------------------------------- Xiangdong Huang School of Software, Tsinghua University 黄向东 清华大学 软件学院 Julian Feinauer <j.feina...@pragmaticminds.de> 于2019年3月4日周一 下午7:17写道: Hi Xiangdong, thanks for the info. How is it in the case when you use the Reader / Writer API for the tsfiles directly (or should this be considered "deprecated")? Can these files come to corrupted state? One Situation where we have to deal with these situations is "at the edge" when we have devices inside large machines. Usually at the end of the shift these machines (and therefore our device) is powered off hard, so no shutdown or de-initialization is possible. Best Julian Am 04.03.19, 12:14 schrieb "Xiangdong Huang" < saint...@gmail.com>: Hi, IoTDB can support either on a server with 7*24 or a RaspberryPi. We have tested both the two scenario. When you shutdown an IoTDB instance in force (e.g., power off) and restart it again, no data loses ( if you enable the WAL). However, currently we do not optimize the time cost of the restart process. It is an important feature that we need to do, because we hope IoTDB can support data management either on the edge devices or the data center. And, the default configuration is not so suitable for running on the edge device. (e.g., block size is 128MB, which is too large for a RaspberryPi, and will slow down the restart process because there are too much WAL data on disk). Best, ----------------------------------- Xiangdong Huang School of Software, Tsinghua University 黄向东 清华大学 软件学院 Tim Mitsch <t.mit...@pragmaticindustries.de> 于2019年3月4日周一 下午6:53写道: Hello development-team First of all thanks for developing this kind of interesting project and bringing it into apache incubator. I have a question regarding the place of operation and robustness: * Is iotDB concepted as application on a server which is running 24/7 or * Is it also possible to run it on a device like RaspberryPi or IPC, where operation can interrupt. I’m asking because i’m searching for solution for a temporary storage that is robust against spontaneous interrupt, e.g. switch off electricity without regular shutdown of OS – have u tested something like this yet? Best regards Tim