Hi Sagar, Thanks for the question, and sorry for muddying the water.
I meant the Bytes/byte[] thing as advice for how you all can solve your problem in the mean time, while we work through this KIP. I don’t think it’s relevant for the KIP itself. I think the big issue here is what the type of the prefix should be in the method signature. Using the same type as the key makes sense some times, but not other times. I’m not sure what the best way around this might be. It might help if there are other typed key/value stores to compare APIs with. Thanks, John On Mon, Jun 1, 2020, at 09:58, Sagar wrote: > Hi John, > > Just to add to my previous email(and sorry for the spam), if we consider > using Bytes/byte[] and manually invoke the serdes, if you could provide > examples where the same Serde for keys won't work for the prefix types. As > far as my understanding goes, the prefix seek would depend upon ordering of > the keys like lexicographic. As long as the binary format is consistent for > both the keys and the prefixes would it not ensure the ability to search in > that same ordering space? This is from my limited understanding so any > concrete examples would be helpful... > > Also, you mentioned about the creation of dummy values to indicate prefix > values, do you mean this line: > > https://github.com/apache/kafka/blob/trunk/streams/src/main/java/org/apache/kafka/streams/kstream/internals/foreignkeyjoin/ForeignJoinSubscriptionProcessorSupplier.java#L91 > This > is where the prefix key is built and used for searching . > > Thanks! > Sagar. > > On Mon, Jun 1, 2020 at 11:42 AM Sagar <sagarmeansoc...@gmail.com> wrote: > > > Hi John, > > > > Thank you. I think it makes sense to modify the KIP to add the > > prefixScan() as part of the existing interfaces and add the new mixin > > behaviour as Rejected alternatives. I am not very aware of other stores > > apart from keyValueStore so is it fine if I keep it there for now? > > > > Regarding the type definition of types I will try and think about some > > alternatives and share if I get any. > > > > Thanks! > > Sagar. > > > > > > On Sun, May 31, 2020 at 1:55 AM John Roesler <vvcep...@apache.org> wrote: > > > >> Hi Sagar, > >> > >> Thanks for the response. Your use case makes sense to me; I figured it > >> must be something like that. > >> > >> On a pragmatic level, in the near term, you might consider basically > >> doing the same thing we did in KIP-213. If you swap out the store types for > >> Byte/byte[] and “manually” invoke the serdes in your own logic, then you > >> can use the same algorithm we did to derive the range scan boundaries from > >> your desired prefix. > >> > >> For the actual KIP, it seems like we would need significant design > >> improvements to be able to do any mixins, so I think we should favor > >> proposing either to just add to the existing interfaces or to create brand > >> new interfaces, as appropriate, for now. Given that prefix can be converted > >> to a range query at a low level, I think we can probably explore adding > >> prefix to the existing interfaces with a default implementation. > >> > >> It seems like that just leaves the question of how to define the type of > >> the prefix. To be honest, I don’t have any great ideas here. Are you able > >> to generate some creative solutions, Sagar? > >> > >> Thanks, > >> John > >> > >> On Tue, May 26, 2020, at 06:42, Sagar wrote: > >> > Hi John, > >> > > >> > Thanks for the detailed reply. I was a bit crammed with work last week > >> so > >> > couldn't respond earlier so apologies for that. > >> > > >> > First of all, thanks for the context that both you and Adam have > >> > provided me on the issues faced previously. As I can clearly see, while > >> I > >> > was able to cut some corners while writing some test cases or > >> benchmarks, > >> > to be able to stitch together a store with prefix scan into an actual > >> > topology needs more work. I am sorry for the half baked tests that I > >> wrote > >> > without realising and you have rightly put it when you said these > >> > challenges aren't obvious up front. > >> > > >> > Now, coming back to the other points, I spent some time going through > >> the > >> > KIP-213 and also some of the code snippets that are talked about in that > >> > KIP. With the detailed explanation that you provided, it is now obvious > >> to > >> > me that keeping a generic type for keys like K won't work oob and hence > >> a > >> > decision was made to use Bytes as the key type. > >> > > >> > I just had another thought on this though. I looked at the range > >> function > >> > that was added in the ReadOnlyKeyValueStore. While the Key and the Value > >> > mentioned in that method is generic, internally almost all queries end > >> up > >> > querying using Bytes in some or the other form. I looked at not just > >> > RocksDb Store but other stores like InMemory store or MemoryLRU and this > >> > seems to be the pattern. I think this stems from the fact that these > >> stores > >> > while implementing KeyValueStore pass Bytes, byte[] as the K and V > >> values. > >> > Classes like MeteredKeyValueStore which don't do this, still use > >> Bytes.wrap > >> > to wrap the passed keys and values and invoke the range method. > >> > > >> > So, the point I am trying to make is, with the same behaviour - and > >> > ignoring for a moment that it's a separate interface which I am trying > >> to > >> > "mix-in"- the issues with the key types could be resolved. I may be > >> wrong > >> > though so would like to know your thoughts on this. Infact unknowingly > >> the > >> > interface implementation of PrefixSeekableType in RockDBStateStore also > >> > passes Bytes and bytes[] as K and V. > >> > > >> > The second part of exposing it via the publically accessible interfaces > >> to > >> > which we downcast while building the topology (like KeyValueStore), I > >> can > >> > clearly see now that mixing-in the way I tried to won't work. My > >> intention > >> > all along was not to hamper the flow of those stores which don't support > >> > prefix scan as yet and hence the separate interface. But, I agree that > >> for > >> > this to work, it needs to be part of some pre-defined store types like > >> > KVStore etc. Right now, I don't have an answer to this but mostly it > >> would > >> > have to be moved there and implemented across all stores(if we see the > >> > worth in prefix scans :) ) > >> > > >> > Regarding the motivation, I am sorry if I wasn't clear. This originated > >> > from one of my own use cases with kafka streams where i needed to find > >> some > >> > keys based upon certain prefix. Infact it's similar to the > >> > RangeScanCombinedKeyUsage diagram in KIP-213 where the otherTable tries > >> to > >> > find entries in the state store based upon the FK. I was using > >> > KevValueStore to be precise. I also remember having a slack > >> conversation on > >> > this, and I was told that this isn't supported right now, but some other > >> > users shared their experiences on how with some hacks they are able to > >> > perform prefix scans even though their use case fits the bill for a > >> prefix > >> > scan. That kind of motivated me to take a stab at it. Unfortunately, I > >> have > >> > lost the slack chat because of some cleanup at the slack channel level. > >> I > >> > will try and update the ambiguous motivation statement in the near > >> future. > >> > > >> > Lastly, I would like to point out, that your response was not at all > >> > discouraging. On the contrary it was really insightful and it's always > >> good > >> > to learn/discover new things :) > >> > > >> > Thanks! > >> > Sagar. > >> > > >> > On Fri, May 15, 2020 at 7:37 AM John Roesler <vvcep...@apache.org> > >> wrote: > >> > > >> > > Hi, Sagar! > >> > > > >> > > Thanks for this KIP. I'm sorry it took me so long to reply. I'll > >> number my > >> > > points differently to avoid confusion. > >> > > > >> > > I can provide some additional context on the difficulties we > >> previously > >> > > faced in KIP-213 (which you and Adam have already discussed). > >> > > > >> > > J1) In your KIP, you propose the following interface: > >> > > > >> > > public interface PrefixSeekableStore<K, V> { > >> > > KeyValueIterator<K, V> prefixSeek(K prefix); > >> > > } > >> > > > >> > > This is roughly the same thing that Adam and I were considering > >> > > before. It has a hidden problem, that it assumes that prefixes of > >> > > keys in the key space are also in the key space. In other words, this > >> > > is a store with key type K, and the API assumes that prefixes are also > >> > > of type K. This is true for some key types, like String or Bytes, but > >> not > >> > > for others. > >> > > > >> > > For example, if the keys are UUIDs, then no prefix is also a UUID. If > >> the > >> > > key is a complex data type, like Windowed<K> in our own DSL, then > >> > > we would absolutely want to query all keys with the same record key > >> > > (the K part), or the same window start time, but in neither case is > >> the > >> > > prefix actually a Windowed<K>. > >> > > > >> > > You can skirt the issue by defining a third type parameter, maybe KP, > >> that > >> > > is the "prefix" type, but this would also be awkward for many usages. > >> > > > >> > > J2) There is a related problem with serialization. Whether something > >> > > is a prefix or not depends not on the Java key (K), but on the binary > >> > > format that is produced when you use a serde on the key. Whether > >> > > we say that the prefix must also be a K or whether it gets its own > >> type, > >> > > KP, there are problems. > >> > > > >> > > In the latter case, we must additionally require a second set of > >> serdes > >> > > for the prefixes, but there's no obvious way to incorporate this in > >> the > >> > > API, especially not in the DSL. > >> > > > >> > > In either case, for the API to actually work, we need to know ahead > >> > > of time that the Serde will produce a binary key that starts with the > >> > > part that we wish to use as a prefix. For example, what we were doing > >> > > briefly in KIP-213 (where we had complex keys, similar to Windowed<K>) > >> > > was to define "dummy" values that indicate that a Windowed<K> is > >> actually > >> > > just a prefix key, not a real key. Maybe the window start time would > >> be > >> > > null or the key part would be null. But we also had to define a serde > >> > > that would very specifically anticipate which component of the complex > >> > > key would need to be used in a prefix key. Having to bring all these > >> > > parts together in a reliable, easy-to-debug, fashion gives me some > >> doubt > >> > > that people would actually be able to use this feature in complicated > >> > > programs without driving themselves crazy. > >> > > > >> > > J3) Thanks so much for including benchmarks and tests! Unfortunately, > >> > > these don't include everything you need to really plug into the > >> Streams > >> > > API. I think when you push it a little farther, you'll realize what > >> Adam > >> > > was talking about wrt the interface difficulties. > >> > > > >> > > In your benchmark and tests, you directly construct the store and then > >> > > use it, but in a real Streams application, you can only provide your > >> > > implementation in a StoreSupplier, for example via the Materialized > >> > > parameter. Then, to use the store from inside a Processor, you'd have > >> > > to get it by name from the ProcessorContext, and then cast it to one > >> of > >> > > the pre-defined store types, KeyValueStore, WindowedStore, or > >> > > SessionStore. It won't work to "mix in" your interface because the > >> > > processor gets a store that's wrapped in layers that handle > >> serialization, > >> > > change-logging, recording metrics, and caching. > >> > > > >> > > To use the store through IQ, you have to provide a QueriableStoreType > >> > > to KafkaStreams#store, and you get back a similarly wrapped store. > >> > > > >> > > I think our only choices to add an interface like yours is either to > >> add > >> > > it to one of the existing store types, like KeyValueStore or > >> > > WindowedStore, or to define a completely new store hierarchy, meaning > >> > > you have to duplicate all the "wrapper" layers in Streams. > >> > > > >> > > I think if you write an "end-to-end" test, where you write a Streams > >> app, > >> > > provide your store, and then use it in a Processor and through IQ, > >> > > you'll see what I'm talking about. > >> > > > >> > > IIRC, those three points were the ones that ultimately led us to > >> abandon > >> > > the whole idea last time and just register the stores with key type > >> Bytes. > >> > > I think some creative solutions may yet be possible, but it'll take > >> some > >> > > more design work to get there. > >> > > > >> > > Can I ask what your motivation is, exactly, for proposing this > >> feature? > >> > > The motivation just says "some users may want to do it", which has > >> > > the advantage that it's impossible to disagree with, but doesn't > >> provide > >> > > a lot of concrete detail ;) > >> > > > >> > > Specifically, what I'm wondering is whether you wanted to use this as > >> > > part of a KayValue store, which might be a challenge, or whether you > >> > > wanted to use it for more efficient scans in a WindowedStore, like > >> > > Guozhang. > >> > > > >> > > Thanks again for the KIP! I hope my response isn't too discouraging; > >> > > I just wanted to convey the challenges we faced last time, since they > >> > > are all not obvious up front. > >> > > > >> > > Best regards, > >> > > -John > >> > > > >> > > > >> > > On Thu, May 14, 2020, at 16:17, Sophie Blee-Goldman wrote: > >> > > > Whoops, I guess I didn't finish reading the KIP all the way to the > >> end > >> > > > earlier. Thanks > >> > > > for including the link to the RocksDB PR in the KIP! > >> > > > > >> > > > I have one additional question about the proposal: do you plan to > >> also > >> > > add > >> > > > this > >> > > > prefix seek API to the dual column family iterators? These are used > >> by > >> > > > RocksDBTimestampedStore (which extends RocksDBStore), for example > >> the > >> > > > *RocksDBDualCFRangeIterator* > >> > > > > >> > > > Thanks for the KIP! > >> > > > > >> > > > On Thu, May 14, 2020 at 10:50 AM Sagar <sagarmeansoc...@gmail.com> > >> > > wrote: > >> > > > > >> > > > > Hey @Adam, > >> > > > > > >> > > > > Thanks for sharing your experience with using prefix seek. I did > >> look > >> > > at > >> > > > > your code for RocksDBPrefixIterator, infact I have repurposed that > >> > > class > >> > > > > itself since it wasn't being used else where. Regarding how I > >> plan to > >> > > > > expose them through-out the state stores, what I have tried to do > >> is > >> > > add it > >> > > > > as a separate interface. So, basically, it is not at the same > >> level as > >> > > the > >> > > > > *range function so to speak. The reason I did that is currently I > >> feel > >> > > not > >> > > > > all state stores are a natural fit for prefix seek. As I > >> mentioned in > >> > > the > >> > > > > KIP as well, the current equivalent to it could be > >> > > BulkLoadingStore(not in > >> > > > > terms of functionality but in terms of how it is also not > >> implemented > >> > > by > >> > > > > all of them). So, that ways I am not needing to stub them across > >> all > >> > > the > >> > > > > state-stores and we can implement it only where needed. For > >> example, > >> > > in the > >> > > > > PR that I have put for reference in the KIP, you can see that I > >> have it > >> > > > > implemented only for RocksDB. > >> > > > > > >> > > > > @Guozhang, > >> > > > > > >> > > > > Thanks for the feedback. Those are very interesting questions and > >> I > >> > > will > >> > > > > try my best to answer based upon whatever limited understanding I > >> have > >> > > > > developed so far :) > >> > > > > > >> > > > > 1) Regarding the usage of useFixedLengthPrefixExtractor, > >> honestly, I > >> > > hadn't > >> > > > > looked at that config. I did look it up after you pointed it out > >> and > >> > > seems > >> > > > > it's more for hash-based memtables? I may be wrong though. But > >> what I > >> > > would > >> > > > > say is that, the changes I had made were not exactly from a > >> correctness > >> > > > > stand point but more from trying to showcase how we can implement > >> these > >> > > > > changes. The idea was that once we see the merit in this approach > >> then > >> > > we > >> > > > > can add some of the tunings( and I would need your team's > >> assistance > >> > > there > >> > > > > :D). > >> > > > > > >> > > > > 2) Regarding the similarity of `RocksDBPrefixIterator` and > >> > > > > `RocksDBRangeIterator`, yes the implementations look more or less > >> > > similar. > >> > > > > So, in terms of performance, they might be similar. But > >> semantically, > >> > > they > >> > > > > can solve 2 different use-cases. The range seek is useful when we > >> know > >> > > both > >> > > > > from and to. But if we consider use-cases where we want to find > >> keys > >> > > with a > >> > > > > certain prefix, but we don't know if what it's start and end is, > >> then > >> > > > > prefix seek would come in more handy. The point that I am trying > >> to > >> > > make is > >> > > > > that it can extend the scope of state stores from just point > >> lookups to > >> > > > > somewhat being able to speculative queries where by users can > >> search > >> > > if a > >> > > > > certain pattern exists. I can vouch for this personally because I > >> > > wanted to > >> > > > > use state stores for one such use case and since this option > >> wasn't > >> > > there, > >> > > > > I had to do some other things. An equivalent to this could be SCAN > >> > > operator > >> > > > > in Redis. (Not trying to compare the Redis and state stores but > >> trying > >> > > to > >> > > > > give some context). > >> > > > > > >> > > > > Regarding the point on bloom filter, I think there are certain > >> > > > > optimisations that are being talked about in case of prefix seek > >> here: > >> > > > > > >> > > > > > >> > > > > > >> > > > >> https://github.com/facebook/rocksdb/wiki/RocksDB-Bloom-Filter#prefix-vs-whole-key > >> > > > > Again > >> > > > > this isn't something that I have explored fully. Also, on the > >> prefix > >> > > seek > >> > > > > page on RocksDB they mention that there's a prefix iterating > >> technique > >> > > > > called Prefix Bloom Filter. > >> > > > > > >> > > > > 3) Regarding the question on length of bytes for seek v/s prefix > >> seek, > >> > > I am > >> > > > > not entirely sure about that scenario. What I have understood is > >> that > >> > > > > at-least for Rocks DB, it is more performant for short iterator > >> queries > >> > > > > that longer ones. > >> > > > > > >> > > > > 4) Regarding the last question on placing it within Segment, the > >> > > reason I > >> > > > > didn't do that way, is that I thought we shouldn't tie this > >> feature > >> > > only to > >> > > > > RocksDB. I agree that I got this idea while looking/reading about > >> > > RocksDB > >> > > > > but if we keep it outside the purview of RocksDB and keep it as a > >> > > pluggable > >> > > > > entity, then a) it remains generic by not being tied to any > >> specific > >> > > store > >> > > > > and b) no change is needed at all for any of the other stores > >> which > >> > > haven't > >> > > > > implemented it. > >> > > > > > >> > > > > I am not sure of any of the above points make sense but as I said, > >> > > this is > >> > > > > based out of my limited understanding of the codebase. So, pardon > >> any > >> > > > > incorrect/illogical statements plz! > >> > > > > > >> > > > > @Sophie, > >> > > > > > >> > > > > Thanks for bringing that point up! I have mentioned about that PR > >> in > >> > > the > >> > > > > KIP under a section called Other considerations. Nonetheless, > >> thanks > >> > > for > >> > > > > pointing it out! > >> > > > > > >> > > > > Thanks! > >> > > > > Sagar. > >> > > > > > >> > > > > > >> > > > > On Thu, May 14, 2020 at 5:17 AM Sophie Blee-Goldman < > >> > > sop...@confluent.io> > >> > > > > wrote: > >> > > > > > >> > > > > > Not to derail this KIP discussion, but to leave a few notes on > >> some > >> > > of > >> > > > > the > >> > > > > > RocksDB points that have come up: > >> > > > > > > >> > > > > > Someone actually merged some long overdue performance > >> improvements to > >> > > > > > the RocksJava implementation (the PR was opened back in 2017! > >> yikes). > >> > > > > > I haven't looked into the prefix seek API closely enough to > >> know how > >> > > > > > relevant > >> > > > > > this particular change is, and they are still improving things, > >> but > >> > > it > >> > > > > > gives me some > >> > > > > > faith. > >> > > > > > > >> > > > > > There are some pretty promising results reported on the PR: > >> > > > > > > >> https://github.com/facebook/rocksdb/pull/2283#issuecomment-561563037 > >> > > > > > > >> > > > > > Regarding the custom comparator, they also recently merged this > >> > > > > performance > >> > > > > > <https://github.com/facebook/rocksdb/pull/6252> > >> > > > > > improvement <https://github.com/facebook/rocksdb/pull/6252>. > >> The > >> > > tl;dr > >> > > > > is > >> > > > > > they reduced the slowdown of a custom comparator in Java > >> > > > > > (relative to the native C++) from ~7x to ~5.2x at best. Which is > >> > > still > >> > > > > not > >> > > > > > great, but it > >> > > > > > would be interesting to run our own benchmarks and see how this > >> > > stacks > >> > > > > up. > >> > > > > > > >> > > > > > Of course, these are all new changes and as such will require > >> us to > >> > > > > upgrade > >> > > > > > rocks to 6.x which means they have to wait for us to release a > >> 3.0. > >> > > But > >> > > > > > there's > >> > > > > > some talk about 3.0 coming in the next few releases so consider > >> it > >> > > food > >> > > > > for > >> > > > > > not-so-future thought > >> > > > > > > >> > > > > > > >> > > > > > On Tue, May 12, 2020 at 5:02 PM Adam Bellemare < > >> > > adam.bellem...@gmail.com > >> > > > > > > >> > > > > > wrote: > >> > > > > > > >> > > > > > > Hi Guozhang > >> > > > > > > > >> > > > > > > For clarity, the issues I was running into was not about the > >> actual > >> > > > > > > *prefixSeek* function itself, but about exposing it to the > >> same > >> > > level > >> > > > > of > >> > > > > > > access as the *range* function throughout Kafka Streams. It > >> > > required a > >> > > > > > lot > >> > > > > > > of changes, and also required that most state stores stub it > >> out > >> > > since > >> > > > > it > >> > > > > > > wasn't clear how they would implement it. It was basically an > >> > > > > > overreaching > >> > > > > > > API change that was easily solved (for the specific > >> prefix-scan in > >> > > FKJ) > >> > > > > > by > >> > > > > > > simply using *range*. So to be clear, the blockers were > >> > > predominantly > >> > > > > > > around correctly handling the API changes, nothing to do with > >> the > >> > > > > > > mechanisms of the RocksDB prefix scanning. > >> > > > > > > > >> > > > > > > As for KAFKA-5285 I'll look into it more to see if I can get a > >> > > better > >> > > > > > > handle on the problem! > >> > > > > > > > >> > > > > > > Hope this helps clear it up. > >> > > > > > > > >> > > > > > > Adam > >> > > > > > > > >> > > > > > > > >> > > > > > > On Tue, May 12, 2020 at 7:16 PM Guozhang Wang < > >> wangg...@gmail.com> > >> > > > > > wrote: > >> > > > > > > > >> > > > > > > > Hello Adam, > >> > > > > > > > > >> > > > > > > > I'm wondering if you can provide a bit more context on the > >> > > blockers > >> > > > > of > >> > > > > > > > using prefixSeek of RocksDB (I saw you have a > >> > > RocksDBPrefixIterator > >> > > > > > class > >> > > > > > > > but not used anywhere yet)? I'm currently looking at ways to > >> > > allow > >> > > > > some > >> > > > > > > > secondary indices with rocksDB following some existing > >> approaches > >> > > > > > > > from CockroachDB etc so I'm very curious to learn your > >> > > experience. > >> > > > > > > > > >> > > > > > > > 1) Before considering any secondary indices, a quick > >> thought is > >> > > that > >> > > > > > for > >> > > > > > > > (key, timeFrom, timeTo) queries, we can easily replace the > >> > > current > >> > > > > > > > `range()` impl with a `prefixRange()` impl via a prefix > >> iterator; > >> > > > > > though > >> > > > > > > > for (keyFrom, keyTo, timeFrom, timeTo) it is much more > >> > > complicated > >> > > > > > indeed > >> > > > > > > > and hence existing `range()` impl may still be used. > >> > > > > > > > > >> > > > > > > > 2) Another related issue I've been pondering for a while is > >> > > > > > > > around KAFKA-5285: with the default lexicograpic byte > >> comparator, > >> > > > > since > >> > > > > > > the > >> > > > > > > > key length varies, the combo (key, window) would have > >> > > interleaving > >> > > > > byte > >> > > > > > > > layouts like: > >> > > > > > > > > >> > > > > > > > AAA0001 (key AAA, timestamp 0001) > >> > > > > > > > AAA00011 (key AAA0, timestamp 0011) > >> > > > > > > > AAA0002 (key AAA, timestamp 0002) > >> > > > > > > > > >> > > > > > > > which is challenging for prefix seeks to work efficiently. > >> > > Although > >> > > > > we > >> > > > > > > can > >> > > > > > > > overwrite the byte-comparator in JNI it is very expensive > >> and the > >> > > > > cost > >> > > > > > of > >> > > > > > > > JNI overwhelms its benefits. If you've got some ideas > >> around it > >> > > > > please > >> > > > > > > lmk > >> > > > > > > > as well. > >> > > > > > > > > >> > > > > > > > Guozhang > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > On Tue, May 12, 2020 at 6:26 AM Adam Bellemare < > >> > > > > > adam.bellem...@gmail.com > >> > > > > > > > > >> > > > > > > > wrote: > >> > > > > > > > > >> > > > > > > > > Hi Sagar > >> > > > > > > > > > >> > > > > > > > > I implemented a very similar interface for KIP-213, the > >> > > foreign-key > >> > > > > > > > joiner. > >> > > > > > > > > We pulled it out of the final implementation and instead > >> used > >> > > > > RocksDB > >> > > > > > > > range > >> > > > > > > > > instead. You can see the particular code where we use > >> > > > > > > RocksDB.range(...) > >> > > > > > > > to > >> > > > > > > > > get the same iterator result. > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > >> https://github.com/apache/kafka/blob/trunk/streams/src/main/java/org/apache/kafka/streams/kstream/internals/foreignkeyjoin/ForeignJoinSubscriptionProcessorSupplier.java#L95 > >> > > > > > > > > > >> > > > > > > > > We pulled it out because there were numerous awkward > >> > > acrobatics to > >> > > > > > > > > integrate *prefixSeek()* function into the Kafka Streams > >> code. > >> > > > > > > > Basically, I > >> > > > > > > > > wanted to be able to access *prefixSeek()* the same way I > >> can > >> > > > > access > >> > > > > > > > > *range()* for any state store, and in particular use it > >> for > >> > > storing > >> > > > > > > data > >> > > > > > > > > with a particular foreign key (as per the previous URL). > >> > > However, I > >> > > > > > > found > >> > > > > > > > > out that it required way too many changes to expose the > >> > > > > > *prefixSeek()* > >> > > > > > > > > functionality while still being able to leverage all the > >> nice > >> > > Kafka > >> > > > > > > > Streams > >> > > > > > > > > state management + supplier functionality, so we made a > >> > > decision > >> > > > > just > >> > > > > > > to > >> > > > > > > > > stick with *range()* and pull everything else out. > >> > > > > > > > > > >> > > > > > > > > I guess my question here is, how do you anticipate using > >> > > > > > *prefixSeek()* > >> > > > > > > > > within the framework of Kafka Streams, or the Processor > >> API? > >> > > > > > > > > > >> > > > > > > > > Adam > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > On Tue, May 12, 2020 at 2:52 AM Sagar < > >> > > sagarmeansoc...@gmail.com> > >> > > > > > > wrote: > >> > > > > > > > > > >> > > > > > > > > > Hi All, > >> > > > > > > > > > > >> > > > > > > > > > I would like to start a discussion on the KIP that I > >> created > >> > > > > below > >> > > > > > to > >> > > > > > > > add > >> > > > > > > > > > prefix scan support in State Stores: > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > >> https://cwiki.apache.org/confluence/display/KAFKA/KIP-614%3A+Add+Prefix+Scan+support+for+State+Stores > >> > > > > > > > > > > >> > > > > > > > > > Thanks! > >> > > > > > > > > > Sagar. > >> > > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > -- > >> > > > > > > > -- Guozhang > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > > >
