Navinder, thanks for updating the KIP. I think the motivation section is not totally accurate (what is not your fault though, as the history of how we handle this case is intertwined...) For example, "auto.offset.reset" is hard-coded for the global consumer to "none" and using "global.consumer.auto.offset.reset" has no effect (cf https://kafka.apache.org/25/documentation/streams/developer-guide/config-streams.html#default-values)
Also, we could not even really deprecate the config as mentioned in rejected alternatives sections, because we need `auto.offset.reset` for the main consumer -- and adding a prefix is independent of it. Also, because we ignore the config, it's is also deprecated/removed if you wish. I guess we could improve the code to actually log a warning for this case, similar to what we do for some configs already (cf StreamsConfig#NON_CONFIGURABLE_CONSUMER_DEFAULT_CONFIGS). The other question is about compatibility with regard to default behavior: if we want to reintroduce `global.consumer.auto.offset.reset` this basically implies that we need to respect `auto.offset.reset`, too. Remember, that any config without prefix is applied to all clients that support this config. Thus, if a user does not limit the scope of the config to the main consumer (via `main.consumer.auto.offset.reset`) but uses the non-prefix versions and sets it to "latest" (and relies on the current behavior that `auto.offset.reset` is "none", and effectively "earliest" on the global consumer), the user might end up with a surprise as the global consumer behavior would switch from "earliest" to "latest" (most likely unintentionally). Bottom line is, that users might need to change configs to preserve the old behavior... However, before we discuss those details, I think we should discuss the topic in a broader context first: - for a GlobalKTable, does it even make sense from a correctness point of view, to allow users to set a custom reset policy? It seems you currently don't propose this in the KIP, but as you don't mention it explicitly it's unclear if that on purpose of an oversight? - Should we treat global stores differently to GlobalKTables and allow for more flexibility (as the PAPI does not really provide any semantic contract). It seems that is what you propose in the KIP. We should discuss if this flexibility does make sense or not for the PAPI, or if we should apply the same reasoning about correctness we use for KTables to global stores? To what extend are/should they be different? - If we support auto.offset.reset for global store, how should we handle the initial bootstrapping of the store/table (that is hard-coded atm)? Should we skip it if the policy is "latest" and start with an empty state? Note that we did consider this behavior incorrect via https://issues.apache.org/jira/browse/KAFKA-6121 and thus I am wondering why should we change it back again? Finally, the main motivation for the Jira ticket was to let the runtime auto-recover instead of dying as it does currently. If we decide that a custom reset policy does actually not make sense, we can just change the global-thread to not die any longer on an `InvalidOffsetException` but rebuild the state automatically. This would be "only" a behavior change but does not require any public API changes. -- For this case, we should also think about the synchronization with the main processing threads? On startup we bootstrap the global stores before processing happens. Thus, if an `InvalidOffsetException` happen and the global thread dies, the main threads cannot access the global stores any longer an also die. If we re-build the state though, do we need to pause the main thread during this phase? -Matthias On 8/2/20 8:48 AM, Navinder Brar wrote: > Hi John, > > I have updated the KIP to make the motivation more clear. In a nutshell, we > will use the already existing config "global.consumer.auto.offset.reset" for > users to set a blanket reset policy for all global topics and add a new > interface to set per-topic reset policy for each global topic(for which we > specifically need this KIP). There was a point raised from Matthias above to > always reset to earliest by cleaning the stores and seekToBeginning in case > of InvalidOffsetException. We can go with that route as well and I don't > think it would need a KIP as if we are not providing users an option to have > blanket reset policy on global topics, then a per-topic override would also > not be required(the KIP is required basically for that). Although, I think if > users have an option to choose reset policy for StreamThread then the option > should be provided for GlobalStreamThread as well and if we don't want to use > the "global.consumer.auto.offset.reset" then we would need to deprecate it > because currently it's not serving any purpose. For now, I have added it in > rejected alternatives but we can discuss this. > > On the query that I had for Guozhang, thanks to Matthias we have fixed it > last week as part of KAFKA-10306. > > ~Navinder > > > On Sunday, 26 July, 2020, 07:37:34 pm IST, Navinder Brar > <navinder_b...@yahoo.com.invalid> wrote: > > > Hi, > > > > Sorry, it took some time to respond back. > > > > > > > > “but I thought we would pass the config through to the client.” > >>> @John, sure we can use the config in GloablStreamThread, that could be one >>> of the way to solve it. > > > > > > > @Matthias, sure cleaning the store and recreating is one way but since we are > giving an option to reset in StreamThread why the implementation should be > different in GlobalStreamThread. I think we should use the > global.consumer.auto.offset.reset config to accept the reset strategy opted > by the user although I would be ok with just cleaning and resetting to the > latest as well for now. Currently, we throw a StreamsException in case of > InvalidOffsetException in GlobalStreamThread so just resetting would still be > better than what happens currently. > > Matthias, I found this comment in StreamBuilder for GlobalKTable ‘* Note that > {@link GlobalKTable} always applies {@code "auto.offset.reset"} strategy > {@code "earliest"} regardless of the specified value in {@link StreamsConfig} > or {@link Consumed}.’ > So, I guess we are already cleaning up and recreating for GlobalKTable from > earliest offset. > > > > > > > > > @Guozhan while looking at the code, I also noticed a TODO: pending in > GlobalStateManagerImpl, when InvalidOffsetException is thrown. Earlier, we > were directly clearing the store here and recreating from scratch but that > code piece is removed now. Are you working on a follow-up PR for this or just > handling the reset in GlobalStreamThread should be sufficient? > > Regards, > Navinder > > On Tuesday, 7 July, 2020, 12:53:36 am IST, Matthias J. Sax > <mj...@apache.org> wrote: > > Atm, the config should be ignored and the global-consumer should use > "none" in a hard-coded way. > > However, if am still wondering if we actually want/need to allow users > to specify the reset policy? It might be worth to consider, to just > change the behavior: catch the exception, log an ERROR (for information > purpose), wipe the store, seekToBeginning(), and recreate the store? > > Btw: if we want to allow users to set the reset policy, this should be > possible via the config, or via overwriting the config in the method > itself. Thus, we would need to add the new overloaded method to > `Topology` and `StreamsBuilder`. > > Another question to ask: what about GlobalKTables? Should they behave > the same? An alternative design could be, to allow users to specify a > flexible reset policy for global-stores, but not for GlobalKTables and > use the strategy suggested above for this case. > > Thoughts? > > > -Matthias > > > On 7/2/20 2:14 PM, John Roesler wrote: >> Hi Navinder, >> >> Thanks for the response. I’m sorry if I’m being dense... You said we are not >> currently using the config, but I thought we would pass the config through >> to the client. Can you confirm whether or not the existing config works for >> your use case? >> >> Thanks, >> John >> >> On Sun, Jun 28, 2020, at 14:09, Navinder Brar wrote: >>> Sorry my bad. Found it. >>> >>> >>> >>> Prefix used to override {@link KafkaConsumer consumer} configs for the >>> global consumer client from >>> >>> * the general consumer client configs. The override precedence is the >>> following (from highest to lowest precedence): >>> * 1. global.consumer.[config-name].. >>> public static final String GLOBAL_CONSUMER_PREFIX = "global.consumer."; >>> >>> >>> >>> So, that's great. We already have a config exposed to reset offsets for >>> global topics via global.consumer.auto.offset.reset just that we are >>> not actually using it inside GlobalStreamThread to reset. >>> >>> -Navinder >>> On Monday, 29 June, 2020, 12:24:21 am IST, Navinder Brar >>> <navinder_b...@yahoo.com.invalid> wrote: >>> >>> Hi John, >>> >>> Thanks for your feedback. >>> 1. I think there is some confusion on my first point, the enum I am >>> sure we can use the same one but the external config which controls the >>> resetting in global stream thread either we can the same one which >>> users use for source topics(StreamThread) or we can provide a new one >>> which specifically controls global topics. For e.g. currently if I get >>> an InvalidOffsetException in any of my source topics, I can choose >>> whether to reset from Earliest or Latest(with auto.offset.reset). Now >>> either we can use the same option and say if I get the same exception >>> for global topics I will follow same resetting. Or some users might >>> want to have totally different setting for both source and global >>> topics, like for source topic I want resetting from Latest but for >>> global topics I want resetting from Earliest so in that case adding a >>> new config might be better. >>> >>> 2. I couldn't find this config currently >>> "global.consumer.auto.offset.reset". Infact in GlobalStreamThread.java >>> we are throwing a StreamsException for InvalidOffsetException and there >>> is a test as >>> well GlobalStreamThreadTest#shouldDieOnInvalidOffsetException(), so I >>> think this is the config we are trying to introduce with this KIP. >>> >>> -Navinder On Saturday, 27 June, 2020, 07:03:04 pm IST, John Roesler >>> <j...@vvcephei.org> wrote: >>> >>> Hi Navinder, >>> >>> Thanks for this proposal! >>> >>> Regarding your question about whether to use the same policy >>> enum or not, the underlying mechanism is the same, so I think >>> we can just use the same AutoOffsetReset enum. >>> >>> Can you confirm whether setting the reset policy config on the >>> global consumer currently works or not? Based on my reading >>> of StreamsConfig, it looks like it would be: >>> "global.consumer.auto.offset.reset". >>> >>> If that does work, would you still propose to augment the >>> Java API? >>> >>> Thanks, >>> -John >>> >>> On Fri, Jun 26, 2020, at 23:52, Navinder Brar wrote: >>>> Hi, >>>> >>>> KIP: >>>> https://cwiki.apache.org/confluence/display/KAFKA/KIP-406%3A+GlobalStreamThread+should+honor+custom+reset+policy >>>> >>>> I have taken over this KIP since it has been dormant for a long time >>>> and this looks important for use-cases that have large global data, so >>>> rebuilding global stores from scratch might seem overkill in case of >>>> InvalidOffsetExecption. >>>> >>>> We want to give users the control to use reset policy(as we do in >>>> StreamThread) in case they hit invalid offsets. I have still not >>>> decided whether to restrict this option to the same reset policy being >>>> used by StreamThread(using auto.offset.reset config) or add another >>>> reset config specifically for global stores >>>> "global.auto.offset.reset" which gives users more control to choose >>>> separate policies for global and stream threads. >>>> >>>> I would like to hear your opinions on the KIP. >>>> >>>> >>>> -Navinder > >
signature.asc
Description: OpenPGP digital signature
