Thanks, Chris. Your feedback is much appreciated! I see how the current proposal might be underestimating some edge cases. I'm happy to move the design for deep-scan and multi-values to future developments related with this KIP and reduce its scope, though open for more feedback.
Also, just to be sure, are you proposing also to not include array access at this stage? Thanks, Jorge. On Tue, 14 Jun 2022 at 03:20, Chris Egerton <fearthecel...@gmail.com> wrote: > Hi Jorge, > > I've done some more thinking and I hate to say it, but I think the syntax > does need to be expanded. Right now it's clear what "a.b" refers to and > what "a..b" refers to, but what about "a...b"? Is that referring to > subfield ".b" of field "a", or subfield "b" of field "a."? This gets even > more complicated when thinking about fields whose names are exclusively > made up of dots. > > I'm also a little hesitant to mix the cases of multi-value paths and deep > scans. What if you only want to access one subfield deep for an SMT, > instead of recursing through all the children of a given field? It's akin > to the distinction between * and ** with file globbing patterns, and there > could be a substantial performance difference if you have heavily-nested > fields. > > Ultimately, I think that if the proposed "field.syntax.version" property > sits well with people, it might be better to reduce the scope of the KIP > back to the original proposal and just focus on adding support for > explicitly-specified nested values, with no multi-value paths whatsoever, > knowing that we have an easy way to introduce new syntax and features in > the future. (We could probably leave the "a...b" case for that next version > too.) > > I was a huge fan of this KIP before we started trying to address more > complex use cases, and although I don't want to write those off, I think we > may have bitten off more than we can chew in time for the 3.3.0 release and > would hate to see this KIP get delayed as a result. > > I'd be really curious to hear from Joshua and Tom on this front, though. Is > it acceptable to move more incrementally here and settle on the syntax > version property as our means of introducing new features, or is it > preferable to implement things monolithically and try to get everything (or > at least, as much as possible) right the first time? > > Thanks again for your continued effort on this KIP! > > Cheers, > > Chris > > On Wed, Jun 8, 2022 at 5:41 PM Jorge Esteban Quilcate Otoya < > quilcate.jo...@gmail.com> wrote: > > > Thanks, Chris! > > > > Please, find my comments below: > > > > On Tue, 7 Jun 2022 at 04:39, Chris Egerton <fearthecel...@gmail.com> > > wrote: > > > > > Hi Jorge, > > > > > > Thanks! Sorry for the delay; here are my thoughts: > > > > > > 1. Under the "Accessing multiple values by deep-scan" header it's > stated > > > that "If deep-scan is used, it must have only one field after the > > asterisk > > > level.". However, in example 3 for the Cast SMT and other examples for > > > other SMTs, the spec contains a field of "*.child.k2", which appears to > > > have two fields after the asterisk level. I may be misunderstanding the > > > proposal, but it seems like the two contradict each other. > > > > > > > Thanks for catching this. I have clarified it by removing this > restriction. > > Also, have extended the deep-scan scenarios. > > > > > > > > > > 2. I'm a little unclear on why we need the special handling for arrays > > > where, for an array field "a", the field name "a" can be treated as > > either > > > the array itself, or every element in the array. Is there a reason we > > can't > > > use the field name "a.*" to handle the latter case, and "a" to handle > the > > > former? > > > > > > > Agree, this is confusing. I like the `a.*` approach to access array > items. > > I have added this to the proposal. > > > > > > > > > > 3. How would a user specify that they'd like to access a field with the > > > literal name "*"? > > > > > > > Good one. I'm proposing an approach similar to how it's proposed to > escape > > dots, with a double-asterisk. Curious on your thoughts around this. > > > > > > > > > > 4. For the Cast SMT, do you think it might bite some people if fields > > that > > > can't be cast correctly are silently ignored? I'm imagining the case > > where > > > none of the fields in a multi-path expression can be cast correctly and > > it > > > ends up eating half of someone's day to track down why their SMT isn't > > > doing anything. > > > > > > > If I understand correctly, this challenge could be relevant across SMTs. > > At the moment, most/all? SMTs just silently ignore. > > Was thinking about adding a flag `field.on.path.not.found` to either > ignore > > or fail when no paths are found. What do your think? > > > > > > > > > > 5. For the ExtractField and ValueToKey SMTs, what happens if a > deep-scan > > > field name is used, but only one field is found? Is the resulting field > > > still an array, or is it just the single field that was found? (FWIW > I'm > > > leaning towards keeping it an array just to keep schemas consistent in > a > > > pipeline in case the number of fields found fluctuates across records.) > > > > > > Agree. Will clarify that an array is always produced even for 1 or 0 > > fields are found. > > > > > > > 6. (Nit) For the HeaderFrom SMT, it's stated that "As this SMT affects > > only > > > existing fields, additional configurations will not be required.". > Given > > > the new "field.syntax.version" property, this part should probably be > > > removed. > > > > > Agree. > > > > > > > > > > 7. Is recursive descent intentionally excluded? That was an important > > part > > > of Joshua's KIP and his feedback on this KIP; I think it's worth > pursuing > > > if we can. > > > > > > > My understanding from Joshua's feedback is that by including support for > > deep-scan, we are already covering the recursive functionality. Though, I > > may be missing something. > > > > > > > > > > > Cheers, > > > > > > Chris > > > > > > On Tue, May 24, 2022 at 3:49 AM Jorge Esteban Quilcate Otoya < > > > quilcate.jo...@gmail.com> wrote: > > > > > > > Thanks, Chris! > > > > > > > > I have updated the KIP with the rejected alternatives updated. Also, > I > > > have > > > > drafted the support for arrays and deep scans as part of the proposed > > > > notation to make it more complete, even though these can be > implemented > > > in > > > > multiple PRs. > > > > > > > > Looking forward to your feedback. > > > > > > > > Cheers, > > > > Jorge. > > > > > > > > On Sat, 21 May 2022 at 17:39, Chris Egerton <fearthecel...@gmail.com > > > > > > wrote: > > > > > > > > > Hi Jorge, > > > > > > > > > > I really appreciate the effort you've made to simplify the syntax > and > > > > > feature set of a JSONPath-based approach as much as possible. I'm > > still > > > > > hesitant to continue with it, though. > > > > > > > > > > 1. The syntax is much less friendly. Just compare "top.mid.bottom" > to > > > > > "$['top']['mid']['bottom']"... not everyone uses JSONPath or even > > JSON, > > > > and > > > > > the learning curve for the former is going to be steeper. The > > examples > > > in > > > > > the new KIP draft you published demonstrate this pretty well, and > > this > > > is > > > > > without diving into the details of what escape syntax would look > > like. > > > > > > > > > > 2. The three new major features that this syntax adds (array > > accesses, > > > > deep > > > > > scans, and multi-value paths) could all be added pretty easily to > the > > > dot > > > > > notation syntax without introducing brackets and dollar signs. > Array > > > > > accesses can be described using the same syntax as struct/map field > > > > access, > > > > > deep scans can be described using '*', and multi-value paths can be > > > > > described by referencing the name of a field that's expected to > have > > > > > children. These are all top-of-the-head ideas and can probably be > > > > refined, > > > > > but hopefully they demonstrate that we can keep the syntax simple > > > without > > > > > sacrificing features. Of course, the question of leaving room for > > > future > > > > > features might arise... given that these are the out-of-the-box > SMTs > > > that > > > > > are likely to be the first that many people encounter, I'd err on > the > > > > side > > > > > of simplicity and a gentle learning curve; if people need to get > more > > > out > > > > > of transforms, the option to implement their own is still there. If > > we > > > > can > > > > > address 95% of use cases with something easy to use, it's not worth > > > > making > > > > > the feature harder for everyone to use just to accommodate the > > > remaining > > > > > 5%. > > > > > > > > > > 3. The advantage of leveraging an existing syntax is twofold: users > > who > > > > are > > > > > already familiar with that syntax don't need to learn a new syntax, > > and > > > > > maintainers of the syntax get to leverage existing libraries and > > > > > documentation for the syntax. With the current proposal, reusing > > > > libraries > > > > > is off the table, which means that we're going to have to parse > this > > > > > ourselves (including all the escape syntax edge cases), and we > won't > > be > > > > > able to automatically leverage new features added to that syntax. > And > > > > given > > > > > how stripped-down the syntax is in comparison to full JSONPath, > > there's > > > > > still going to be a learning curve for users who are already > familiar > > > > with > > > > > it, and we'll still have to document how Connect's variant of > > JSONPath > > > > > works either instead of or in addition to just linking to a > > > > well-maintained > > > > > third-party docs site. > > > > > > > > > > On the topic of "field.path" and "include.path" vs. "field.style", > I > > > > > actually think that a single property per SMT is cleaner and > simpler. > > > > > Allowing users to mix and match styles within the same SMT config > > seems > > > > > like a recipe for confusion, and with a single property that > dictates > > > > field > > > > > syntax behavior, we leave the door open to change the default at a > > > later > > > > > date. We could even fully remove support for plain field notation > at > > > some > > > > > point and still be able to retain the simple property names of > > "field", > > > > > "include", etc. instead of forcing people to use "field.path" and > the > > > > like. > > > > > That said, the term "field.style" and the permitted values might > be a > > > > > little ambiguous. One alternative, though a little heavy-handed, is > > to > > > > > change it to "field.syntax.version" with permitted values of "V1" > > > > (default, > > > > > equivalent to "field.style = plain") and "V2" (equivalent to > > > > "field.style = > > > > > nested"). This would leave us room in the future to make further > > > changes > > > > to > > > > > the syntax without having to come up with new names, although it > does > > > > > sacrifice a little bit in that the permitted values are no longer > > > > > self-describing. > > > > > > > > > > Cheers, > > > > > > > > > > Chris > > > > > > > > > > On Sun, May 15, 2022 at 4:51 PM Jorge Esteban Quilcate Otoya < > > > > > quilcate.jo...@gmail.com> wrote: > > > > > > > > > > > Thank you all for your feedback, and sorry for the long wait for > a > > > > reply. > > > > > > > > > > > > I would like to explore the idea of JSONPath-inspired/subset > > > notation a > > > > > bit > > > > > > further: > > > > > > > > > > > > It will need to be a much-reduced version of JSONPath: > > > > > > - No full support for JsonPath therefore an additional > dependency. > > > > > > - All paths must start with '$' > > > > > > - No functions support or other operators allowed. > > > > > > - JsonPath dotted and square-bracket notations can be supported > to > > > > avoid > > > > > > escaping dots or other characters: `$a.b.c` and `$['a.b']['c']` - > > or > > > we > > > > > > could only support the second one as it's more complete. > > > > > > - Add support for arrays with `[<integer>]`, e.g. `$a.[1].b` > > > > > > - Add support for multiple-value paths using array access > `$a.*.b` > > or > > > > > deep > > > > > > scan `$a..b`. > > > > > > - Some SMTs that will benefit from this: `MaskField`, `Cast`, > > > > > > `ReplaceField`. > > > > > > - We could introduce a `path[s]` config under the current > > > > configurations > > > > > to > > > > > > apply this feature so no compatibility issues are introduced: > e.g. > > > > > > `field.path`, `fields.paths`, `exclude.path`. > > > > > > > > > > > > With these, 100, 101, 102, and 103 will be effectively solved. > > > > > > > > > > > > The main challenge that I see at the moment is that by being JSON > > > > > > path-like, there may be some edge cases that I can't foresee at > the > > > > > moment, > > > > > > that could make this hard to implement, test, and maintain in the > > > long > > > > > run. > > > > > > > > > > > > I'll appreciate your feedback on how this JSONPath-based > > alternative > > > > > > compares to the dotted notation initially proposed, and if it > > matches > > > > > your > > > > > > feedback. > > > > > > I have drafted a copy of the KIP to change the examples to > JSONPath > > > > > > approach and validate some differences: > > > > > > https://cwiki.apache.org/confluence/x/9BihD > > > > > > > > > > > > About 104. I agreed with Chris. We can handle this as part of a > new > > > > KIP. > > > > > > > > > > > > Thanks, > > > > > > Jorge. > > > > > > > > > > > > On Sun, 24 Apr 2022 at 17:27, Chris Egerton < > > fearthecel...@gmail.com > > > > > > > > > > wrote: > > > > > > > > > > > > > Hi Joshua, > > > > > > > > > > > > > > I have a few reservations about using JsonPath notation here. > > > > > > > > > > > > > > 1. There's likely to be a substantial performance penalty for > > > > > converting > > > > > > > between the Kafka Connect format and something that a JsonPath > > > > library > > > > > > > would understand. > > > > > > > > > > > > > > 2. The complexity of the feature will be significantly higher. > It > > > > will > > > > > be > > > > > > > harder to test, document, and implement. There will be many > more > > > edge > > > > > > cases > > > > > > > to consider and support, and we'll be on the hook to handle any > > > bugs > > > > or > > > > > > > inconsistencies that arise, either as a result of our use of > the > > > > > JsonPath > > > > > > > library we choose, or as a result of bugs in that library. > > > > > > > > > > > > > > 3. It's not clear that JsonPath is superior or even suitable > for > > > some > > > > > of > > > > > > > the SMTs proposed here. What would be the advantages of > JsonPath > > > with > > > > > the > > > > > > > InsertField or HoistField SMTs? > > > > > > > > > > > > > > I also don't think that adding dot notation is unfriendly to > > users; > > > > > many > > > > > > > have proposed this type of syntax in the past, and it's > > frequently > > > > used > > > > > > in > > > > > > > informal discussions to refer to nested fields. If the proposed > > > > syntax > > > > > > was > > > > > > > not already intuitive then a case against deciding on our own > > might > > > > be > > > > > > more > > > > > > > convincing, but as things stand, simple dot notation is likely > > > going > > > > to > > > > > > be > > > > > > > easier for users to understand than JsonPath syntax. > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > On Fri, Apr 22, 2022 at 9:31 AM Joshua Grisham < > > > > grishamj...@gmail.com> > > > > > > > wrote: > > > > > > > > > > > > > > > Hello all! > > > > > > > > > > > > > > > > Sorry that I come a bit later to the party here, but I am the > > one > > > > who > > > > > > > wrote > > > > > > > > KIP-683 [1] for recursive support (just simply looping > through > > > all > > > > > > child > > > > > > > > non-primitive structures for the same matching name(s)) which > > is > > > a > > > > > > > slightly > > > > > > > > different way to try and solve a similar requirement -- > > > > unfortunately > > > > > > at > > > > > > > > the time the dev community was not quite as active and then I > > > also > > > > > got > > > > > > > busy > > > > > > > > with work and just life in general so wasn't able to follow > up > > or > > > > > push > > > > > > > it. > > > > > > > > > > > > > > > > I do think it is a very good idea to have some kind of > > path-like > > > > > > > expression > > > > > > > > to be able to specifically address a nested field, as I can > see > > > > that > > > > > > the > > > > > > > > simple "recursive" case could potentially result in unwanted > or > > > > > > > unexpected > > > > > > > > behavior, plus there is the potential to introduce a bit of a > > > > > > performance > > > > > > > > hit to always loop through everything in cases where the > > > > > schemas/values > > > > > > > > might be quite large. > > > > > > > > > > > > > > > > One thing I wanted to ask: instead of creating a new "path > > > parser" > > > > > > > > including some bespoke or "borrowed" syntax, why not just use > > > > > something > > > > > > > > that already exists? Specifically here I am thinking about > > > > JsonPath ( > > > > > > > > https://github.com/json-path/JsonPath) > > > > > > > > > > > > > > > > There is already quite nice support in JsonPath for handling > > > > special > > > > > > > > characters in field names, for handling different > non-primitive > > > > types > > > > > > > > (arrays etc), for handling multiple levels of nesting, etc > etc. > > > > > Would > > > > > > it > > > > > > > > be possible to instead to re-think this and maybe have some > > kind > > > of > > > > > > > > JsonPath-based Schema selector / updater and/or > JsonPath-based > > > > Value > > > > > > > > selector / updater? Conceptually this feels like it makes > sense > > > to > > > > > me, > > > > > > as > > > > > > > > from the top of my head it would be quite a natural fit to > map > > a > > > > Json > > > > > > > data > > > > > > > > structure to the Connect API data structure (and you could > > > > > potentially > > > > > > > even > > > > > > > > try to leverage the existing Json-to-Connect > > > > serializer/deserializer > > > > > to > > > > > > > > help out with this even in a more "out of the box"-feeling > kind > > > of > > > > > > way). > > > > > > > > > > > > > > > > Maybe also as Tom mentioned, this part (in my example, this > > > > > > > JsonPath-based > > > > > > > > "thing") could even be a generic API that could be used by > any > > > SMT, > > > > > > > > including used in custom ones built by the community. Then I > > > think > > > > > to > > > > > > > use > > > > > > > > a completely separate config property somehow related to > "path" > > > (as > > > > > Tom > > > > > > > > also mentioned) would also make a lot of sense here as well. > > This > > > > > way, > > > > > > if > > > > > > > > you select based on "path" then this JsonPath-based API would > > be > > > > > used, > > > > > > > > otherwise it could use something similar to the existing > > > get-field > > > > > > based > > > > > > > > approach (which I guess could also be refactored into some > kind > > > of > > > > > > > utility > > > > > > > > / API as well if it made sense?) > > > > > > > > > > > > > > > > And with that in mind, if this was the kind of direction to > go, > > > > then > > > > > a > > > > > > > > "recursive" capability like I pitched in KIP-683 would also > > > become > > > > > > > > unnecessary because you could easily write a JsonPath > > expression > > > > like > > > > > > > > "$..someRecuriveField" and it would do the same thing (on top > > of > > > > > > anything > > > > > > > > else you would want to do that is already supported by > > JsonPath). > > > > > Then > > > > > > we > > > > > > > > could also kill that older KIP and do a bit of clean-up :) > > > > > > > > > > > > > > > > [1] - > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/KAFKA/KIP-683%3A+Add+recursive+support+to+Connect+Cast+and+ReplaceField+transforms%2C+and+support+for+casting+complex+types+to+either+a+native+or+JSON+string > > > > > > > > > > > > > > > > Just some extra food for thought. All-in-all I think this is > a > > > > super > > > > > > > great > > > > > > > > initiative! > > > > > > > > > > > > > > > > Best, > > > > > > > > > > > > > > > > Joshua > > > > > > > > > > > > > > > > > > > > > > > > Den fre 22 apr. 2022 kl 14:50 skrev Chris Egerton < > > > > > > > fearthecel...@gmail.com > > > > > > > > >: > > > > > > > > > > > > > > > > > Hi Tom, > > > > > > > > > > > > > > > > > > Thanks for taking a look at this, and for your thoughtful > > > > comments. > > > > > > > I'll > > > > > > > > > leave it up to Jorge to address most of your comments but I > > > > wanted > > > > > to > > > > > > > > share > > > > > > > > > a couple quick thoughts I had regarding 103 and 104. > > > > > > > > > > > > > > > > > > 103. Like you, I was envisioning a possible syntax for > array > > > > access > > > > > > > that > > > > > > > > > used classic C-style brackets; e.g., `arr[index]`. > However, I > > > > > wonder > > > > > > if > > > > > > > > we > > > > > > > > > could keep things simple and use the same syntax that we're > > > > > proposing > > > > > > > for > > > > > > > > > nested field access? In other words, instead of > `arr[index]`, > > > > you'd > > > > > > > write > > > > > > > > > `arr.index`. It'd save us and users the headache of > reserving > > > > > > > characters > > > > > > > > > now that would need to be escaped even if their unescaped > > > > brethren > > > > > > > aren't > > > > > > > > > used for anything, and also avoid the question of what > > exactly > > > we > > > > > > > should > > > > > > > > do > > > > > > > > > when we see a config that uses reserved characters that > > aren't > > > > yet > > > > > > > > > supported (throwing an exception seems pretty unfriendly > for > > > new > > > > > > > users). > > > > > > > > > > > > > > > > > > 104. This would probably be useful, but it would come with > > some > > > > > nasty > > > > > > > > > compatibility questions that would need to be addressed if > > we'd > > > > > want > > > > > > > SMTs > > > > > > > > > that leverage this new API to be viable for older versions > of > > > > > > Connect. > > > > > > > If > > > > > > > > > we package and distribute this feature as a library (either > > via > > > > an > > > > > > > > entirely > > > > > > > > > new artifact, or as part of the existing connect-transforms > > or > > > > > > > > connect-api > > > > > > > > > artifacts), then we'd have to either sidestep the existing > > > plugin > > > > > > > > isolation > > > > > > > > > logic [1] that basically makes it impossible for Connect > > > plugins > > > > to > > > > > > > ship > > > > > > > > > their own versions of Connect artifacts, or issue a big > > warning > > > > to > > > > > > > people > > > > > > > > > that any SMT that uses this API won't work with any older > > > > versions > > > > > of > > > > > > > > > Connect. There's also some other features we might want to > > add > > > in > > > > > an > > > > > > > > > SMT-utils library such as the existing, internal, utils > that > > > > > Connect > > > > > > > uses > > > > > > > > > right now [2]. It may be worth exploring this in a separate > > KIP > > > > of > > > > > > its > > > > > > > > own. > > > > > > > > > > > > > > > > > > [1] - > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://github.com/apache/kafka/blob/d480c4aa6e513e36050d8e067931de2270525d18/connect/runtime/src/main/java/org/apache/kafka/connect/runtime/isolation/PluginUtils.java#L46-L143 > > > > > > > > > > > > > > > > > > [2] - > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://github.com/apache/kafka/tree/d480c4aa6e513e36050d8e067931de2270525d18/connect/transforms/src/main/java/org/apache/kafka/connect/transforms/util > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > On Fri, Apr 22, 2022 at 6:55 AM Tom Bentley < > > > tbent...@redhat.com > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > Hi Jorge, > > > > > > > > > > > > > > > > > > > > Thanks for the KIP, especially for the examples which are > > > > > > > super-clear. > > > > > > > > > > > > > > > > > > > > 100. The name `field.style` isn't so clear for something > > like > > > > > > > > > ReplaceField: > > > > > > > > > > it's not so obvious that field.style applies to `include` > > and > > > > > > > > `exclude`. > > > > > > > > > > > > > > > > > > > > 101. The permitted values for `field.style` don't seem > > > terribly > > > > > > > > intuitive > > > > > > > > > > (to me anyway): the meaning of `plain` isn't very > > guessable. > > > > Why > > > > > > not > > > > > > > > > > `top-level` or `root` instead? Also `nested` could be > > > > > misconstrued > > > > > > to > > > > > > > > > mean > > > > > > > > > > nested-but-not-top-level, so perhaps `recursive` or > > > `cascading` > > > > > > might > > > > > > > > be > > > > > > > > > > better? > > > > > > > > > > > > > > > > > > > > 102. I'm torn on whether making the interpretation of > > > existing > > > > > > > configs > > > > > > > > > like > > > > > > > > > > `field` be dependent on `field.style` is a good idea. I > can > > > see > > > > > > that > > > > > > > > it's > > > > > > > > > > the simplest thing to do, but it just feels a bit odd > that > > > > > > sometimes > > > > > > > > the > > > > > > > > > > `field` would actually be a path and have different > > escaping > > > > > rules. > > > > > > > An > > > > > > > > > > alternative would be to come up with a parallel set of > > config > > > > > names > > > > > > > > (e.g. > > > > > > > > > > as well as "field" an SMT might support "path") which > were > > > > > defined > > > > > > to > > > > > > > > > > always take paths, thus avoiding the changeable > > > interpretation > > > > of > > > > > > the > > > > > > > > > > existing configs. The SMT's #configure() would need to > > throw > > > in > > > > > the > > > > > > > > case > > > > > > > > > > that both configs were given. I can see that that would > be > > > more > > > > > > work > > > > > > > in > > > > > > > > > > implementation, but it feels cleaner. > > > > > > > > > > > > > > > > > > > > 103. I think in order to allow for supporting arrays in a > > > later > > > > > KIP > > > > > > > > > (which > > > > > > > > > > certainly seems like it could be useful), we'd want to > > > specify > > > > > the > > > > > > > > syntax > > > > > > > > > > now, even if it wasn't implemented under this KIP. That's > > > > > because I > > > > > > > > don't > > > > > > > > > > think you can't exclude the possibility that characters > > such > > > as > > > > > `[` > > > > > > > and > > > > > > > > > `]` > > > > > > > > > > appear in field names. So you'd have a compatibility > > problem > > > if > > > > > > > people > > > > > > > > > > started using the features of this KIP to access such > > fields, > > > > > only > > > > > > > for > > > > > > > > > > those characters to change their meaning under a later > KIP. > > > > > > > > > > > > > > > > > > > > 104. I also wonder whether making paths into a public > Java > > > API, > > > > > for > > > > > > > use > > > > > > > > > by > > > > > > > > > > 3rd party SMTs, would be valuable. > > > > > > > > > > > > > > > > > > > > Thanks again, > > > > > > > > > > > > > > > > > > > > Tom > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 20 Apr 2022 at 17:53, Chris Egerton < > > > > > > fearthecel...@gmail.com > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > 💯 Thanks Jorge, LGTM! > > > > > > > > > > > > > > > > > > > > > > On Wed, Apr 20, 2022, 12:40 Jorge Esteban Quilcate > Otoya > > < > > > > > > > > > > > quilcate.jo...@gmail.com> wrote: > > > > > > > > > > > > > > > > > > > > > > > Thank you, Chris! Not possible without your feedback. > > > > > > > > > > > > > > > > > > > > > > > > On Tue, 19 Apr 2022 at 23:04, Chris Egerton < > > > > > > > > fearthecel...@gmail.com > > > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > Hi Jorge, > > > > > > > > > > > > > > > > > > > > > > > > > > Thank you for sticking through this. I have one > small > > > > > remark > > > > > > > and > > > > > > > > > one > > > > > > > > > > > > small > > > > > > > > > > > > > clarification; assuming you agree with me on them > > then > > > > I'm > > > > > > > ready > > > > > > > > to > > > > > > > > > > > vote > > > > > > > > > > > > on > > > > > > > > > > > > > the KIP. > > > > > > > > > > > > > > > > > > > > > > > > > > 1. InsertField: The "field.on.missing.parent" and > > > > > > > > > > > > "field.on.existing.field" > > > > > > > > > > > > > docs both mention a permitted value of "ingore"; > this > > > > > should > > > > > > be > > > > > > > > > > > "ignore", > > > > > > > > > > > > > right? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Of course, one more typo :) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2. InsertField: The examples are still missing the > > > > > > > "field.style" > > > > > > > > > > > property > > > > > > > > > > > > > from the configurations. They should all include > the > > > > > property > > > > > > > > > > > > > "transforms.smt1.field.style": "nested", correct? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yes, it is there. I think I know what you mean now, > > seems > > > > > that > > > > > > > > > > Confluence > > > > > > > > > > > > is putting everything in one line when it's in > separate > > > > lines > > > > > > in > > > > > > > > the > > > > > > > > > > > > editor. > > > > > > > > > > > > Hopefully, it's fixed now. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks again for working through this, and > > > > congratulations > > > > > > on a > > > > > > > > > > > > > well-written KIP! > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Apr 19, 2022 at 2:06 PM Jorge Esteban > > Quilcate > > > > > Otoya > > > > > > < > > > > > > > > > > > > > quilcate.jo...@gmail.com> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > Thank you, Chris! I apply these improvements to > the > > > > KIP, > > > > > > let > > > > > > > me > > > > > > > > > > know > > > > > > > > > > > > how > > > > > > > > > > > > > it > > > > > > > > > > > > > > looks now. > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, 11 Apr 2022 at 23:43, Chris Egerton < > > > > > > > > > > fearthecel...@gmail.com > > > > > > > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Jorge, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Wow, those examples are great! A few more > > remarks, > > > > but > > > > > I > > > > > > > > think > > > > > > > > > > > we're > > > > > > > > > > > > > > > getting close: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1. The examples differ across SMTs with the > name > > of > > > > the > > > > > > > > > > > > > newly-introduced > > > > > > > > > > > > > > > style property; some of them use "field.style", > > and > > > > > some > > > > > > > use > > > > > > > > > > > > > > > "fields.style". I think for consistency's sake > we > > > > > should > > > > > > > > stick > > > > > > > > > > with > > > > > > > > > > > > > just > > > > > > > > > > > > > > > "field.style"; otherwise it could be painful > for > > > > users > > > > > to > > > > > > > > have > > > > > > > > > to > > > > > > > > > > > > > > remember > > > > > > > > > > > > > > > which to use. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Great catch. Agree, I fixed the config names to > > > > > > > `field.style`. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2. Some of the examples are off: > > > > > > > > > > > > > > > - TimestampConverter: the input in the second > > > example > > > > > > > ("when > > > > > > > > > > field > > > > > > > > > > > > > names > > > > > > > > > > > > > > > include dots") doesn't contain a field with a > > > dotted > > > > > name > > > > > > > > > > > > > > > - ValueToKey: the config in the third example > > > ("when > > > > > > field > > > > > > > > > names > > > > > > > > > > > > > include > > > > > > > > > > > > > > > dots") should probably use "parent..child.k2" > as > > > the > > > > > > > > > > > > > > > "transforms.smt1.fields" property > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Fixed. Thanks! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 3. RE changes to InsertField: > > > > > > > > > > > > > > > - The InsertField SMT should also come with the > > new > > > > > > > > > "field.style" > > > > > > > > > > > > > > property > > > > > > > > > > > > > > > in order to preserve backwards compatibility, > > > right? > > > > I > > > > > > > don't > > > > > > > > > see > > > > > > > > > > it > > > > > > > > > > > > > > > included in the example configs for that one, > > just > > > > want > > > > > > to > > > > > > > > make > > > > > > > > > > > sure > > > > > > > > > > > > > > > - I don't know of any cases where we use > > snake_case > > > > for > > > > > > > > > property > > > > > > > > > > > > names > > > > > > > > > > > > > in > > > > > > > > > > > > > > > Kafka; we should probably use > "on.missing.parent" > > > and > > > > > > > > > > > > > "on.existing.field" > > > > > > > > > > > > > > > as the new property names for InsertField. > > > > > > > > > > > > > > > - Why is the "on_existing_field" (or > > > > > "on.existing.field") > > > > > > > > > > property > > > > > > > > > > > > only > > > > > > > > > > > > > > > applied when the field style is nested? > Couldn't > > it > > > > be > > > > > > > useful > > > > > > > > > for > > > > > > > > > > > > > > > non-nested fields as well? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Great points! I have applied these suggestions to > > the > > > > > KIP. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Sat, Apr 9, 2022 at 12:40 PM Jorge Esteban > > > > Quilcate > > > > > > > Otoya > > > > > > > > < > > > > > > > > > > > > > > > quilcate.jo...@gmail.com> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Again, great feedback Chris. Much > appreciated. > > > > > > > > > > > > > > > > Added my comments below: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, 5 Apr 2022 at 20:22, Chris Egerton < > > > > > > > > > > > > fearthecel...@gmail.com> > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Jorge, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Looking good! I have a few comments left > but > > > all > > > > > but > > > > > > > one > > > > > > > > or > > > > > > > > > > two > > > > > > > > > > > > are > > > > > > > > > > > > > > > > minor. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1. The motivation section states "This KIP > is > > > > aimed > > > > > > to > > > > > > > > > > include > > > > > > > > > > > > > > support > > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > nested structures on the existing SMTs... > and > > > to > > > > > > > include > > > > > > > > > the > > > > > > > > > > > > > > > abstractions > > > > > > > > > > > > > > > > > to reuse this in future SMTs". A good > > > > > implementation > > > > > > of > > > > > > > > > this > > > > > > > > > > > KIP > > > > > > > > > > > > > will > > > > > > > > > > > > > > > > > definitely isolate reusable logic into a > > > separate > > > > > > > > > abstraction > > > > > > > > > > > > that > > > > > > > > > > > > > > can > > > > > > > > > > > > > > > be > > > > > > > > > > > > > > > > > easily pulled in to the SMTs we want to add > > > > nested > > > > > > > field > > > > > > > > > > > support > > > > > > > > > > > > > to, > > > > > > > > > > > > > > > but > > > > > > > > > > > > > > > > > unless we plan on making this kind of > > > abstraction > > > > > > > > publicly > > > > > > > > > > > > > available > > > > > > > > > > > > > > as > > > > > > > > > > > > > > > > > some kind of utility method or class that > > > > external > > > > > > SMT > > > > > > > > > > > developers > > > > > > > > > > > > > can > > > > > > > > > > > > > > > > > leverage, we can probably leave this part > out > > > as > > > > > it's > > > > > > > > more > > > > > > > > > of > > > > > > > > > > > an > > > > > > > > > > > > > > > > > implementation detail. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Make sense, will leave this out of the KIP. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2. The Cast example is a little misleading, > > > isn't > > > > > it? > > > > > > > It > > > > > > > > > > > > > demonstrates > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > escape syntax for fields with dot literals > in > > > > their > > > > > > > > names, > > > > > > > > > > but > > > > > > > > > > > it > > > > > > > > > > > > > > > doesn't > > > > > > > > > > > > > > > > > demonstrate a way to actually use the Cast > > (or > > > > any > > > > > > > other) > > > > > > > > > SMT > > > > > > > > > > > to > > > > > > > > > > > > > > > access a > > > > > > > > > > > > > > > > > nested field in a record, which is the > whole > > > > point > > > > > of > > > > > > > the > > > > > > > > > > KIP. > > > > > > > > > > > I > > > > > > > > > > > > > like > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > example of escape syntax but we should > > probably > > > > > also > > > > > > > add > > > > > > > > > one > > > > > > > > > > > for > > > > > > > > > > > > > > nested > > > > > > > > > > > > > > > > > field access. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Agree. I have added examples to each SMT to > be > > > more > > > > > > clear > > > > > > > > > about > > > > > > > > > > > how > > > > > > > > > > > > > it > > > > > > > > > > > > > > > > affects each function > > > > > > > > > > > > > > > > . > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 3. With the InsertField SMT, I'm wondering > > what > > > > the > > > > > > > > > specific > > > > > > > > > > > > > behavior > > > > > > > > > > > > > > > > will > > > > > > > > > > > > > > > > > be when some or all of the "middle layer" > > > nested > > > > > > fields > > > > > > > > are > > > > > > > > > > > > > missing. > > > > > > > > > > > > > > > For > > > > > > > > > > > > > > > > > example, if I have a record with a value > of { > > > > "k1": > > > > > > > "v1 } > > > > > > > > > > and I > > > > > > > > > > > > > apply > > > > > > > > > > > > > > > > > InsertField with topic.field = > > n1.n2.n3.topic, > > > > what > > > > > > > will > > > > > > > > > > > happen? > > > > > > > > > > > > > Will > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > updated value become { "k1": "v1", "n1": { > > > "n2": > > > > { > > > > > > > "n3": > > > > > > > > > > > "topic" > > > > > > > > > > > > > }}}, > > > > > > > > > > > > > > > > will > > > > > > > > > > > > > > > > > an exception be thrown, or something else? > > This > > > > > seems > > > > > > > > > > analogous > > > > > > > > > > > > to > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > command line mkdir command, which (at least > > on > > > > some > > > > > > > > > operating > > > > > > > > > > > > > > systems) > > > > > > > > > > > > > > > > > fails by default if you try to create a new > > > > nested > > > > > > > > > directory > > > > > > > > > > > > where > > > > > > > > > > > > > > > > anything > > > > > > > > > > > > > > > > > but the last element in the path doesn't > > exist, > > > > but > > > > > > can > > > > > > > > be > > > > > > > > > > > > invoked > > > > > > > > > > > > > > > with a > > > > > > > > > > > > > > > > > flag that instructs it to go ahead and > create > > > all > > > > > > > levels > > > > > > > > of > > > > > > > > > > > > nested > > > > > > > > > > > > > > > > > directory instead. I'm leaning on the side > of > > > > "just > > > > > > > > create > > > > > > > > > > > > > > everything" > > > > > > > > > > > > > > > > but > > > > > > > > > > > > > > > > > would be interested in your thoughts, and > > > either > > > > > way, > > > > > > > we > > > > > > > > > > should > > > > > > > > > > > > > > > probably > > > > > > > > > > > > > > > > > make sure the intended behavior is > > well-defined > > > > > > before > > > > > > > > > > voting. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > This is an interesting case, thanks for > > catching > > > > > this! > > > > > > > > > > > > > > > > The default behavior I see is to create > parents > > > if > > > > > they > > > > > > > are > > > > > > > > > > > missing > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > overwrite fields > > > > > > > > > > > > > > > > if they already exist. > > > > > > > > > > > > > > > > I'm planning to include the following two > flags > > > if > > > > > > there > > > > > > > > is a > > > > > > > > > > > need > > > > > > > > > > > > to > > > > > > > > > > > > > > > > overwrite this behavior: > > > > > > > > > > > > > > > > - `on_missing_parent` = (CREATE|IGNORE), > > > > > default=CREATE > > > > > > > > > > > > > > > > - `on_existing_field` = (OVERWRITE|IGNORE), > > > > > > > > default=OVERWRITE > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 4. Similarly, what will the behavior be if > > any > > > of > > > > > the > > > > > > > > field > > > > > > > > > > > > > elements > > > > > > > > > > > > > > > > > specified with InsertField already exist in > > the > > > > > > record > > > > > > > > > value? > > > > > > > > > > > > Will > > > > > > > > > > > > > we > > > > > > > > > > > > > > > > just > > > > > > > > > > > > > > > > > overwrite them? What's the behavior of > > > > InsertField > > > > > > > today > > > > > > > > > > under > > > > > > > > > > > > > > similar > > > > > > > > > > > > > > > > > circumstances? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The current behavior is to overwrite the > value. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Mar 31, 2022 at 4:15 PM Jorge > Esteban > > > > > > Quilcate > > > > > > > > > Otoya > > > > > > > > > > < > > > > > > > > > > > > > > > > > quilcate.jo...@gmail.com> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, Chris! Much appreciated all the > > > > feedback > > > > > > > here. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1. You nailed it setting the design goal > > > here: > > > > > "it > > > > > > > > > > shouldn't > > > > > > > > > > > be > > > > > > > > > > > > > > > > > impossible > > > > > > > > > > > > > > > > > > to use this new feature for any field > name, > > > no > > > > > > matter > > > > > > > > how > > > > > > > > > > > > > > convoluted. > > > > > > > > > > > > > > > > > It's > > > > > > > > > > > > > > > > > > fine if edge cases introduce difficulty > > (such > > > > as > > > > > > > > > > > less-readable > > > > > > > > > > > > > > > > > > configurations), but it's not fine if > they > > > > can't > > > > > be > > > > > > > > > > addressed > > > > > > > > > > > > at > > > > > > > > > > > > > > > all." > > > > > > > > > > > > > > > > > > Back to the previous proposals (using > only > > > dots > > > > > as > > > > > > > > > > > separators) > > > > > > > > > > > > we > > > > > > > > > > > > > > > have > > > > > > > > > > > > > > > > 2 > > > > > > > > > > > > > > > > > > alternatives: > > > > > > > > > > > > > > > > > > 1. escaping with backslashes > > > > > > > > > > > > > > > > > > 2. escaping with dots itself > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'll lean for alternative 2, as you > > proposed > > > > > > before. > > > > > > > > > Feels > > > > > > > > > > to > > > > > > > > > > > > me > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > backslashes have more potential to lead > to > > > > > > confusion > > > > > > > in > > > > > > > > > > JSON > > > > > > > > > > > > > > configs, > > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > CSV seems like a good precedent to use > the > > > same > > > > > > > > character > > > > > > > > > > to > > > > > > > > > > > > > escape > > > > > > > > > > > > > > > > > itself. > > > > > > > > > > > > > > > > > > KIP is updated to reflect this. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2. Thanks! I'll add an example, and stick > > > with > > > > > the > > > > > > > > > current > > > > > > > > > > > > > approach > > > > > > > > > > > > > > > > > > defining the style per individual > transform > > > > > > > > > configuration. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 3. Yes, thanks! KIP updated. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 4. Of course. KIP updated. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, 28 Mar 2022 at 21:59, Chris > > Egerton < > > > > > > > > > > > > > > fearthecel...@gmail.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Jorge, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for addressing my comments; the > > KIP > > > > > looks > > > > > > > > > > up-to-date > > > > > > > > > > > > and > > > > > > > > > > > > > > > > pretty > > > > > > > > > > > > > > > > > > > readable now, and the rejected > > alternatives > > > > > > section > > > > > > > > > does > > > > > > > > > > a > > > > > > > > > > > > > great > > > > > > > > > > > > > > > job > > > > > > > > > > > > > > > > of > > > > > > > > > > > > > > > > > > > outlining the discussion so far and > > > providing > > > > > > > context > > > > > > > > > for > > > > > > > > > > > > > anyone > > > > > > > > > > > > > > > else > > > > > > > > > > > > > > > > > who > > > > > > > > > > > > > > > > > > > might want to join in. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1. Thoughts on choice of delimiter: > > > > > > > > > > > > > > > > > > > - I like the optimization for simple > > cases, > > > > > but I > > > > > > > > think > > > > > > > > > > the > > > > > > > > > > > > new > > > > > > > > > > > > > > > > > proposal > > > > > > > > > > > > > > > > > > is > > > > > > > > > > > > > > > > > > > a little too restrictive. What if > > there's a > > > > > field > > > > > > > > whose > > > > > > > > > > > name > > > > > > > > > > > > > > > contains > > > > > > > > > > > > > > > > > all > > > > > > > > > > > > > > > > > > > of the permitted options (currently > just > > > ".", > > > > > > ",", > > > > > > > > and > > > > > > > > > > > "/")? > > > > > > > > > > > > > > > > > > > - If we expand the set of permitted > > > > delimiters > > > > > to > > > > > > > > allow > > > > > > > > > > for > > > > > > > > > > > > any > > > > > > > > > > > > > > > > > > > single-character string, configuration > > > > > complexity > > > > > > > > will > > > > > > > > > > > > increase > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > readability may decrease > > > > > > > > > > > > > > > > > > > - Also worth pointing out that there is > > > some > > > > > > > > convention > > > > > > > > > > for > > > > > > > > > > > > > > > doubling > > > > > > > > > > > > > > > > a > > > > > > > > > > > > > > > > > > > delimiter character as an escape > > mechanism > > > > with > > > > > > > > formats > > > > > > > > > > > like > > > > > > > > > > > > > CSV > > > > > > > > > > > > > > > [1] > > > > > > > > > > > > > > > > > > > - Overall I think we may be approaching > > the > > > > > > > > saturation > > > > > > > > > > > point > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > > productive > > > > > > > > > > > > > > > > > > > discussion on delimiter syntax so I > don't > > > > want > > > > > to > > > > > > > > spend > > > > > > > > > > too > > > > > > > > > > > > > much > > > > > > > > > > > > > > > more > > > > > > > > > > > > > > > > > of > > > > > > > > > > > > > > > > > > > your time on it. I think the one point > > I'd > > > > like > > > > > > to > > > > > > > > > leave > > > > > > > > > > > for > > > > > > > > > > > > > now > > > > > > > > > > > > > > is > > > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > it > > > > > > > > > > > > > > > > > > > shouldn't be impossible to use this new > > > > feature > > > > > > for > > > > > > > > any > > > > > > > > > > > field > > > > > > > > > > > > > > name, > > > > > > > > > > > > > > > > no > > > > > > > > > > > > > > > > > > > matter how convoluted. It's fine if > edge > > > > cases > > > > > > > > > introduce > > > > > > > > > > > > > > difficulty > > > > > > > > > > > > > > > > > (such > > > > > > > > > > > > > > > > > > > as less-readable configurations), but > > it's > > > > not > > > > > > fine > > > > > > > > if > > > > > > > > > > they > > > > > > > > > > > > > can't > > > > > > > > > > > > > > > be > > > > > > > > > > > > > > > > > > > addressed at all. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2. > > > > > > > > > > > > > > > > > > > The configuration style where you > define > > > > > > > > > > > > > "transforms.field.style" > > > > > > > > > > > > > > > in > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > connector config, and then this applies > > to > > > > all > > > > > > SMTs > > > > > > > > for > > > > > > > > > > the > > > > > > > > > > > > > > > > connector, > > > > > > > > > > > > > > > > > is > > > > > > > > > > > > > > > > > > > very interesting. However, it doesn't > > > follow > > > > > > > > convention > > > > > > > > > > for > > > > > > > > > > > > > > > existing > > > > > > > > > > > > > > > > > > SMTs. > > > > > > > > > > > > > > > > > > > Right now, if you want to configure an > > SMT, > > > > you > > > > > > > > define > > > > > > > > > > its > > > > > > > > > > > > name > > > > > > > > > > > > > > in > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > connector config (for example, > > > "transforms": > > > > > > > "smt1"), > > > > > > > > > and > > > > > > > > > > > > then > > > > > > > > > > > > > > > define > > > > > > > > > > > > > > > > > all > > > > > > > > > > > > > > > > > > > of the properties for that SMT in the > > > > connector > > > > > > > > config > > > > > > > > > > > using > > > > > > > > > > > > a > > > > > > > > > > > > > > > > > > namespacing > > > > > > > > > > > > > > > > > > > mechanism specific to that SMT (for > > > example, > > > > > > > > > > > > > > > "transforms.smt1.prop1": > > > > > > > > > > > > > > > > > > > "val1"). That SMT then sees only the > > > > properties > > > > > > > > defined > > > > > > > > > > in > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > namespace, > > > > > > > > > > > > > > > > > > > with the prefix stripped (for example, > > > > "prop1": > > > > > > > > "val1") > > > > > > > > > > in > > > > > > > > > > > > its > > > > > > > > > > > > > > > > > configure > > > > > > > > > > > > > > > > > > > [2] [3] method. > > > > > > > > > > > > > > > > > > > If we want to continue to follow this > > > > > convention, > > > > > > > > then > > > > > > > > > > > > instead > > > > > > > > > > > > > of > > > > > > > > > > > > > > > > > > > specifying "transforms.field.style" in > a > > > > > > connector > > > > > > > > > > config, > > > > > > > > > > > we > > > > > > > > > > > > > > would > > > > > > > > > > > > > > > > > > expect > > > > > > > > > > > > > > > > > > > users to configure > > > > > > "transforms.<name>.field.style", > > > > > > > > for > > > > > > > > > > > each > > > > > > > > > > > > > SMT > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > they > > > > > > > > > > > > > > > > > > > want to configure a field style for. > This > > > > would > > > > > > > > require > > > > > > > > > > > more > > > > > > > > > > > > > work > > > > > > > > > > > > > > > on > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > part of the user, but would be simpler > to > > > > > reason > > > > > > > > about > > > > > > > > > > and > > > > > > > > > > > > > easier > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > implement. > > > > > > > > > > > > > > > > > > > If we want to explore an alternative > > where > > > > > users > > > > > > > can > > > > > > > > > > > specify > > > > > > > > > > > > > > global > > > > > > > > > > > > > > > > > > > properties that apply to all transforms > > in > > > a > > > > > > > > connector > > > > > > > > > > > > config, > > > > > > > > > > > > > > then > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > semantics for this need to be defined > in > > > the > > > > > KIP. > > > > > > > > This > > > > > > > > > > > would > > > > > > > > > > > > > have > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > include whether this will apply only > for > > > the > > > > > > > special > > > > > > > > > case > > > > > > > > > > > of > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > "field.style" and possibly > > > "field.separator" > > > > > > > > properties > > > > > > > > > > or > > > > > > > > > > > if > > > > > > > > > > > > > it > > > > > > > > > > > > > > > > would > > > > > > > > > > > > > > > > > be > > > > > > > > > > > > > > > > > > > available more generally for other > > > > properties, > > > > > > > > whether > > > > > > > > > it > > > > > > > > > > > > will > > > > > > > > > > > > > > > apply > > > > > > > > > > > > > > > > > only > > > > > > > > > > > > > > > > > > > for the SMTs outlined in the KIP or if > > the > > > > > > > > > "field.style" > > > > > > > > > > > and > > > > > > > > > > > > > > > possibly > > > > > > > > > > > > > > > > > > > "field.separator" properties would also > > be > > > > > passed > > > > > > > > into > > > > > > > > > > > custom > > > > > > > > > > > > > > SMTs > > > > > > > > > > > > > > > so > > > > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > > they could choose to act on them if > > > > applicable, > > > > > > how > > > > > > > > > edge > > > > > > > > > > > > cases > > > > > > > > > > > > > > like > > > > > > > > > > > > > > > > > > having > > > > > > > > > > > > > > > > > > > an SMT named "field" in your connector > > > config > > > > > > would > > > > > > > > be > > > > > > > > > > > > handled, > > > > > > > > > > > > > > > etc. > > > > > > > > > > > > > > > > > > > Either way, it might help to have an > > > example > > > > in > > > > > > the > > > > > > > > KIP > > > > > > > > > > > > > outlining > > > > > > > > > > > > > > > how > > > > > > > > > > > > > > > > > one > > > > > > > > > > > > > > > > > > > of the to-be-augmented SMTs can be > > > configured > > > > > > with > > > > > > > > this > > > > > > > > > > new > > > > > > > > > > > > > > feature > > > > > > > > > > > > > > > > > and a > > > > > > > > > > > > > > > > > > > before/after of how a record value > would > > be > > > > > > > > transformed > > > > > > > > > > > with > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > > configuration. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 3. The docstring for the > > > > > "transforms.field.style" > > > > > > > > > > property > > > > > > > > > > > > > > mentions > > > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > > the permitted values are "plain" and > > > > "nested", > > > > > > but > > > > > > > > then > > > > > > > > > > > > > describes > > > > > > > > > > > > > > > > > > behavior > > > > > > > > > > > > > > > > > > > with a value of "root". Should that be > > > > "plain" > > > > > > > > instead? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 4. The docstring for the > > > > > > > "transforms.field.separator" > > > > > > > > > > > > property > > > > > > > > > > > > > > > > > > exclusively > > > > > > > > > > > > > > > > > > > mentions structs, but the feature is > > > intended > > > > > to > > > > > > > work > > > > > > > > > > with > > > > > > > > > > > > maps > > > > > > > > > > > > > > as > > > > > > > > > > > > > > > > > well. > > > > > > > > > > > > > > > > > > > Can we update it to reflect this? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > References: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [1] - > > https://stackoverflow.com/a/17808731 > > > > > > > > > > > > > > > > > > > [2] - > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://github.com/apache/kafka/blob/7243facb8d69a7252e6b9556b5eaee13e41bab7f/connect/api/src/main/java/org/apache/kafka/connect/transforms/Transformation.java#L30 > > > > > > > > > > > > > > > > > > > [3] - > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://github.com/apache/kafka/blob/7243facb8d69a7252e6b9556b5eaee13e41bab7f/clients/src/main/java/org/apache/kafka/common/Configurable.java#L26-L29 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, Mar 28, 2022 at 1:32 PM Jorge > > > Esteban > > > > > > > > Quilcate > > > > > > > > > > > Otoya > > > > > > > > > > > > < > > > > > > > > > > > > > > > > > > > quilcate.jo...@gmail.com> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, Chris! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1. I'd argue "this..field.child" > could > > be > > > > > > harder > > > > > > > to > > > > > > > > > > grasp > > > > > > > > > > > > > than > > > > > > > > > > > > > > > > > > > > "this.field/child" + separator: "/". > > > > > > > > > > > > > > > > > > > > Even though this represents > additional > > > > > > > information, > > > > > > > > > it > > > > > > > > > > > > > follows > > > > > > > > > > > > > > a > > > > > > > > > > > > > > > > > > similar > > > > > > > > > > > > > > > > > > > > approach as the "Flatten#delimeter" > > > > > > > configuration. > > > > > > > > > > > > > > > > > > > > I want to give the separator approach > > > > another > > > > > > > try, > > > > > > > > > so I > > > > > > > > > > > > have > > > > > > > > > > > > > > > > updated > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > KIP with the separator proposal, > > sticking > > > > to > > > > > > > only 2 > > > > > > > > > > > > > > alternatives > > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > > > should hopefully cover most > scenarios. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2. Agree. KIP has been updated with > > this > > > > > > > > improvement. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 3. You're right. I have updated this > > > > section > > > > > > > > > > accordingly. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 4. Good catch! I've replaced it with > > > > > > > `DropHeaders`. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Looking forward to your feedback. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > > > > > > > Jorge. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 9 Mar 2022 at 21:33, Chris > > > Egerton > > > > < > > > > > > > > > > > > > > > > fearthecel...@gmail.com> > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Jorge, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Looking good! Got a few more > > thoughts. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1. Sorry to revisit this, but I > think > > > we > > > > > may > > > > > > > want > > > > > > > > > to > > > > > > > > > > > > adopt > > > > > > > > > > > > > a > > > > > > > > > > > > > > > > > slightly > > > > > > > > > > > > > > > > > > > > > different escape syntax style. > > > > Backslashes > > > > > > are > > > > > > > > > great, > > > > > > > > > > > but > > > > > > > > > > > > > > since > > > > > > > > > > > > > > > > > > they're > > > > > > > > > > > > > > > > > > > > > already used by JSON, using them as > > an > > > > > escape > > > > > > > > > > sequence > > > > > > > > > > > in > > > > > > > > > > > > > > field > > > > > > > > > > > > > > > > > > > notation > > > > > > > > > > > > > > > > > > > > > would also lead to some pretty ugly > > > > > connector > > > > > > > > > > configs. > > > > > > > > > > > > > Anyone > > > > > > > > > > > > > > > > who's > > > > > > > > > > > > > > > > > > had > > > > > > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > > > write regular expressions with > > > > backslashes > > > > > in > > > > > > > > Java > > > > > > > > > is > > > > > > > > > > > > > > probably > > > > > > > > > > > > > > > > > > already > > > > > > > > > > > > > > > > > > > > > familiar with this: > > > > > > > > > > > > > > > "this\\\\.is\\\\.not\\\\.very\\\\.readable". > > > > > > > > > > > > > > > > > What > > > > > > > > > > > > > > > > > > > do > > > > > > > > > > > > > > > > > > > > > you think about using the dot > > character > > > > to > > > > > > > escape > > > > > > > > > > > itself? > > > > > > > > > > > > > In > > > > > > > > > > > > > > > > other > > > > > > > > > > > > > > > > > > > words, > > > > > > > > > > > > > > > > > > > > > to access a single field named > > > > > "this.field", > > > > > > > > > instead > > > > > > > > > > of > > > > > > > > > > > > > using > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > syntax > > > > > > > > > > > > > > > > > > > > > "this\.field" (which in JSON would > > have > > > > to > > > > > be > > > > > > > > > > expressed > > > > > > > > > > > > as > > > > > > > > > > > > > > > > > > > > "this\\.field"), > > > > > > > > > > > > > > > > > > > > > we could use "this..field", and > for a > > > > > single > > > > > > > > field > > > > > > > > > > > named > > > > > > > > > > > > > > > > > > "this\field", > > > > > > > > > > > > > > > > > > > > > instead of using the syntax > > > "this\\field" > > > > > > (or, > > > > > > > in > > > > > > > > > > JSON, > > > > > > > > > > > > > > > > > > > "this\\\\field"), > > > > > > > > > > > > > > > > > > > > > we could use "this\field" (or, in > > JSON, > > > > > > > > > > "this\\field"). > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2. Could you flesh out the details > on > > > the > > > > > new > > > > > > > > > > > > "field.style" > > > > > > > > > > > > > > > > > property, > > > > > > > > > > > > > > > > > > > > > including the type, default value, > > > > > > importance, > > > > > > > > and > > > > > > > > > a > > > > > > > > > > > > > > > preliminary > > > > > > > > > > > > > > > > > > > > docstring? > > > > > > > > > > > > > > > > > > > > > See > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/KAFKA/KIP-618%3A+Exactly-Once+Support+for+Source+Connectors#KIP618:ExactlyOnceSupportforSourceConnectors-Newproperties > > > > > > > > > > > > > > > > > > > > > for an example. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 3. Is the "Compatibility, > > Deprecation, > > > > and > > > > > > > > > Migration > > > > > > > > > > > > Plan" > > > > > > > > > > > > > > > > section > > > > > > > > > > > > > > > > > > > still > > > > > > > > > > > > > > > > > > > > > accurate after the latest update? > > Seems > > > > > like > > > > > > > it's > > > > > > > > > > still > > > > > > > > > > > > > > written > > > > > > > > > > > > > > > > > with > > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > assumption that nested field syntax > > > will > > > > be > > > > > > > > > hardcoded > > > > > > > > > > > or > > > > > > > > > > > > > > > opt-in, > > > > > > > > > > > > > > > > > > which > > > > > > > > > > > > > > > > > > > > IIUC > > > > > > > > > > > > > > > > > > > > > isn't the case anymore. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 4. Nit: The "These SMTs do not > > require > > > > > nested > > > > > > > > > > structure > > > > > > > > > > > > > > > support" > > > > > > > > > > > > > > > > > > > section > > > > > > > > > > > > > > > > > > > > > mentions a "Drop" SMT. I think this > > may > > > > be > > > > > > > > > referring > > > > > > > > > > to > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > Confluent > > > > > > > > > > > > > > > > > > > > Drop > > > > > > > > > > > > > > > > > > > > > SMT, which isn't a part of Apache > > > Kafka. > > > > > > Should > > > > > > > > we > > > > > > > > > > drop > > > > > > > > > > > > > (heh) > > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > SMT > > > > > > > > > > > > > > > > > > > > from > > > > > > > > > > > > > > > > > > > > > the list? Or perhaps just replace > it > > > with > > > > > > > > > > > "DropHeaders", > > > > > > > > > > > > > > which > > > > > > > > > > > > > > > is > > > > > > > > > > > > > > > > > > > > currently > > > > > > > > > > > > > > > > > > > > > missing from the list and shouldn't > > > > require > > > > > > any > > > > > > > > > > > > > nested-field > > > > > > > > > > > > > > > > > related > > > > > > > > > > > > > > > > > > > > > updates? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, Feb 28, 2022 at 2:12 PM > Jorge > > > > > Esteban > > > > > > > > > > Quilcate > > > > > > > > > > > > > Otoya > > > > > > > > > > > > > > < > > > > > > > > > > > > > > > > > > > > > quilcate.jo...@gmail.com> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thank you, Chris! and sorry for > the > > > > > delayed > > > > > > > > > > response. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Please, find my comments below: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, 14 Feb 2022 at 17:34, > Chris > > > > > Egerton > > > > > > > > > > > > > > > > > > > > <chr...@confluent.io.invalid > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Jorge, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for the KIP! I'd love to > > see > > > > > > support > > > > > > > > for > > > > > > > > > > > > nested > > > > > > > > > > > > > > > fields > > > > > > > > > > > > > > > > > > added > > > > > > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > > out-of-the-box SMTs provided > with > > > > > > Connect. > > > > > > > > Here > > > > > > > > > > are > > > > > > > > > > > > my > > > > > > > > > > > > > > > > initial > > > > > > > > > > > > > > > > > > > > > thoughts: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1. I agree that there's a case > to > > > be > > > > > made > > > > > > > for > > > > > > > > > > > > expanding > > > > > > > > > > > > > > > > > > HoistField > > > > > > > > > > > > > > > > > > > > > with a > > > > > > > > > > > > > > > > > > > > > > > new config property for > > > identifying a > > > > > > > nested, > > > > > > > > > > > > > > to-be-hoisted > > > > > > > > > > > > > > > > > > field, > > > > > > > > > > > > > > > > > > > > but > > > > > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > > example in the KIP doesn't > really > > > > > > > demonstrate > > > > > > > > > why > > > > > > > > > > > > this > > > > > > > > > > > > > > > would > > > > > > > > > > > > > > > > be > > > > > > > > > > > > > > > > > > > > > > valuable. I > > > > > > > > > > > > > > > > > > > > > > > think it'd be helpful to expand > > the > > > > > > example > > > > > > > > to > > > > > > > > > > add > > > > > > > > > > > > > other > > > > > > > > > > > > > > > > fields > > > > > > > > > > > > > > > > > > in > > > > > > > > > > > > > > > > > > > > > order > > > > > > > > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > > > > > show how adding nested field > > > support > > > > > > > enables > > > > > > > > > > users > > > > > > > > > > > to > > > > > > > > > > > > > > > hoist a > > > > > > > > > > > > > > > > > > > nested > > > > > > > > > > > > > > > > > > > > > > field > > > > > > > > > > > > > > > > > > > > > > > without dropping other fields > > from > > > > the > > > > > > > value. > > > > > > > > > > Maybe > > > > > > > > > > > > > > > something > > > > > > > > > > > > > > > > > > like > > > > > > > > > > > > > > > > > > > > > this: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > source = nested.val > > > > > > > > > > > > > > > > > > > > > > > field = line > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > value (before): > > > > > > > > > > > > > > > > > > > > > > > { > > > > > > > > > > > > > > > > > > > > > > > "nested": { > > > > > > > > > > > > > > > > > > > > > > > "val": 42, > > > > > > > > > > > > > > > > > > > > > > > "other val": 96 > > > > > > > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > value (after): > > > > > > > > > > > > > > > > > > > > > > > { > > > > > > > > > > > > > > > > > > > > > > > "nested": { > > > > > > > > > > > > > > > > > > > > > > > "line": { > > > > > > > > > > > > > > > > > > > > > > > "val": 42, > > > > > > > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > "other val": 96 > > > > > > > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2. Nit: I think "source" is a > > > little > > > > > > > strange > > > > > > > > > for > > > > > > > > > > > the > > > > > > > > > > > > > new > > > > > > > > > > > > > > > > > > HoistField > > > > > > > > > > > > > > > > > > > > > > > property name. Maybe "hoisted" > or > > > > > > > > > "hoisted.field" > > > > > > > > > > > > would > > > > > > > > > > > > > > be > > > > > > > > > > > > > > > > more > > > > > > > > > > > > > > > > > > > > > > > descriptive? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > About 1. and 2.: > > > > > > > > > > > > > > > > > > > > > > Agree. The example for this SMT > is > > > > > updated > > > > > > > and > > > > > > > > > have > > > > > > > > > > > > added > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > `hoisted` > > > > > > > > > > > > > > > > > > > > > > configuration. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 3. Is there a reasonable use > case > > > for > > > > > > > > expanding > > > > > > > > > > > > Flatten > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > be > > > > > > > > > > > > > > > > > > able > > > > > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > > > > > flatten specific fields? My > > > > > understanding > > > > > > > is > > > > > > > > > that > > > > > > > > > > > > it's > > > > > > > > > > > > > > > mostly > > > > > > > > > > > > > > > > > > > useful > > > > > > > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > > > > > > > writing to systems like > databases > > > > that > > > > > > > don't > > > > > > > > > > > support > > > > > > > > > > > > > > nested > > > > > > > > > > > > > > > > > > values > > > > > > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > > > > > require everything to be a flat > > > list > > > > of > > > > > > > > > key-value > > > > > > > > > > > > > pairs. > > > > > > > > > > > > > > > > Being > > > > > > > > > > > > > > > > > > able > > > > > > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > > > > > flatten a nested field wouldn't > > > > provide > > > > > > any > > > > > > > > > > > advantage > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > use > > > > > > > > > > > > > > > > > > > > > case. > > > > > > > > > > > > > > > > > > > > > > > Are there other cases where it > > > would? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 4. I don't think we should > > > > > > unconditionally > > > > > > > > > change > > > > > > > > > > > the > > > > > > > > > > > > > > > default > > > > > > > > > > > > > > > > > > > > delimiter > > > > > > > > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > > > > > > > Flatten. It's a > > > > backwards-incompatible, > > > > > > > > > breaking > > > > > > > > > > > > change > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > could > > > > > > > > > > > > > > > > > > > > > cause > > > > > > > > > > > > > > > > > > > > > > > headaches for users. It might > be > > > > > > reasonable > > > > > > > > to > > > > > > > > > > > change > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > default > > > > > > > > > > > > > > > > > > > > value > > > > > > > > > > > > > > > > > > > > > > > dynamically based on whether > the > > > user > > > > > has > > > > > > > > > > > specified a > > > > > > > > > > > > > > value > > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > "field" > > > > > > > > > > > > > > > > > > > > > > > property, but considering the > > > > > motivation > > > > > > > for > > > > > > > > > > > changing > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > default > > > > > > > > > > > > > > > > > > > is > > > > > > > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > > > > > > it creates conflicts with the > > > > > > > > to-be-introduced > > > > > > > > > > > nested > > > > > > > > > > > > > > field > > > > > > > > > > > > > > > > > > syntax > > > > > > > > > > > > > > > > > > > > > (which > > > > > > > > > > > > > > > > > > > > > > > could arise with downstream > SMTs > > > > > > regardless > > > > > > > > of > > > > > > > > > > > > whether > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > user > > > > > > > > > > > > > > > > > > has > > > > > > > > > > > > > > > > > > > > > > > explicitly configured Flatten > > with > > > > the > > > > > > > > "field" > > > > > > > > > > > > > > property), I > > > > > > > > > > > > > > > > > don't > > > > > > > > > > > > > > > > > > > > know > > > > > > > > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > > > > > > this would be too useful > either. > > I > > > > have > > > > > > > some > > > > > > > > > > > thoughts > > > > > > > > > > > > > > below > > > > > > > > > > > > > > > > on > > > > > > > > > > > > > > > > > > how > > > > > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > > > > > handle possible conflicts > between > > > > names > > > > > > > with > > > > > > > > > dots > > > > > > > > > > > in > > > > > > > > > > > > > > their > > > > > > > > > > > > > > > > > names > > > > > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > > > > dotted > > > > > > > > > > > > > > > > > > > > > > > syntax for nested field > > references > > > > that > > > > > > > > should > > > > > > > > > > > > > hopefully > > > > > > > > > > > > > > > make > > > > > > > > > > > > > > > > > > > either > > > > > > > > > > > > > > > > > > > > > > change > > > > > > > > > > > > > > > > > > > > > > > unnecessary. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Fair enough. With the support for > > > > nested > > > > > > > fields > > > > > > > > > in > > > > > > > > > > > > other > > > > > > > > > > > > > > > SMTs, > > > > > > > > > > > > > > > > > > > Flatten > > > > > > > > > > > > > > > > > > > > > > could stay as it is. > > > > > > > > > > > > > > > > > > > > > > This removes the need for (4) > > > changing > > > > > > > Flatten > > > > > > > > > > config > > > > > > > > > > > > as > > > > > > > > > > > > > > > well. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 5. I think it's fine to expand > > > > > > ExtractField > > > > > > > > to > > > > > > > > > > > > support > > > > > > > > > > > > > > > nested > > > > > > > > > > > > > > > > > > > > notation, > > > > > > > > > > > > > > > > > > > > > > but > > > > > > > > > > > > > > > > > > > > > > > it might be worth noting in the > > > > > rejected > > > > > > > > > > > alternatives > > > > > > > > > > > > > > > section > > > > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > > > this > > > > > > > > > > > > > > > > > > > > > > > isn't strictly necessary since > > you > > > > can > > > > > > > > replace > > > > > > > > > > any > > > > > > > > > > > > > single > > > > > > > > > > > > > > > > > > > invocation > > > > > > > > > > > > > > > > > > > > of > > > > > > > > > > > > > > > > > > > > > > > that SMT that uses nested field > > > > > notation > > > > > > > with > > > > > > > > > > > > multiple > > > > > > > > > > > > > > > > > > invocations > > > > > > > > > > > > > > > > > > > of > > > > > > > > > > > > > > > > > > > > > it > > > > > > > > > > > > > > > > > > > > > > > that use non-nested notation. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Agree. Adding it. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 6. Nit: "RegerRouter" should be > > > > > > > "RegexRouter" > > > > > > > > > in > > > > > > > > > > > the > > > > > > > > > > > > > list > > > > > > > > > > > > > > > of > > > > > > > > > > > > > > > > > SMTs > > > > > > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > > > > do > > > > > > > > > > > > > > > > > > > > > > > not require nested structure > > > support. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Ack. Fixing it. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 7. It may be rare for dots in > > field > > > > > names > > > > > > > to > > > > > > > > > > occur > > > > > > > > > > > in > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > wild > > > > > > > > > > > > > > > > > > > > > (although > > > > > > > > > > > > > > > > > > > > > > I > > > > > > > > > > > > > > > > > > > > > > > wouldn't be so certain of > this), > > > but > > > > > > unless > > > > > > > > we > > > > > > > > > > want > > > > > > > > > > > > to > > > > > > > > > > > > > > > > inflict > > > > > > > > > > > > > > > > > > > > > headaches > > > > > > > > > > > > > > > > > > > > > > on > > > > > > > > > > > > > > > > > > > > > > > users of Flatten, I think we're > > > going > > > > > to > > > > > > > have > > > > > > > > > to > > > > > > > > > > > > think > > > > > > > > > > > > > > > about > > > > > > > > > > > > > > > > > > > > conflicts > > > > > > > > > > > > > > > > > > > > > > > between dotted notation and > > > > non-nested > > > > > > > fields > > > > > > > > > > whose > > > > > > > > > > > > > names > > > > > > > > > > > > > > > > > contain > > > > > > > > > > > > > > > > > > > > > dots. I > > > > > > > > > > > > > > > > > > > > > > > don't think this is actually > > such a > > > > bad > > > > > > > > thing, > > > > > > > > > > > > though. > > > > > > > > > > > > > I > > > > > > > > > > > > > > > > agree > > > > > > > > > > > > > > > > > > that > > > > > > > > > > > > > > > > > > > > > > dotted > > > > > > > > > > > > > > > > > > > > > > > notation is intuitive and > pretty > > > > > > > commonplace > > > > > > > > > (in > > > > > > > > > > > > tools > > > > > > > > > > > > > > like > > > > > > > > > > > > > > > > jq, > > > > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > > > > > > > example), so I'd like it if we > > > could > > > > > > stick > > > > > > > to > > > > > > > > > it. > > > > > > > > > > > > What > > > > > > > > > > > > > > > about > > > > > > > > > > > > > > > > > > > > > introducing > > > > > > > > > > > > > > > > > > > > > > > escape syntax, using a > backslash? > > > > That > > > > > > way, > > > > > > > > > users > > > > > > > > > > > > could > > > > > > > > > > > > > > > > > > > disambiguate > > > > > > > > > > > > > > > > > > > > > > > between "this.field" (which > would > > > > refer > > > > > > to > > > > > > > > the > > > > > > > > > > > nested > > > > > > > > > > > > > > field > > > > > > > > > > > > > > > > > > "field" > > > > > > > > > > > > > > > > > > > > > under > > > > > > > > > > > > > > > > > > > > > > > the top-level "this" field), > and > > > > > > > > "this\.field" > > > > > > > > > > > (which > > > > > > > > > > > > > > would > > > > > > > > > > > > > > > > > refer > > > > > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > > field named "this.field"). Like > > > with > > > > > most > > > > > > > > > > languages > > > > > > > > > > > > > that > > > > > > > > > > > > > > > use > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > backslash > > > > > > > > > > > > > > > > > > > > > > > for escape sequences, it could > > also > > > > be > > > > > > used > > > > > > > > to > > > > > > > > > > > escape > > > > > > > > > > > > > > > itself, > > > > > > > > > > > > > > > > > in > > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > event > > > > > > > > > > > > > > > > > > > > > > > that a field name contains a > > > > > backslash. I > > > > > > > > think > > > > > > > > > > > this > > > > > > > > > > > > is > > > > > > > > > > > > > > > more > > > > > > > > > > > > > > > > > > > > intuitive > > > > > > > > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > > > > > simpler than, e.g., adding a > new > > > > config > > > > > > > > > property > > > > > > > > > > to > > > > > > > > > > > > > > toggle > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > delimiter > > > > > > > > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > > > > > be used when parsing nested > field > > > > > > > references. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I like this approach. Adding to > the > > > > KIP. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 8. I don't think we can > > > > unconditionally > > > > > > > turn > > > > > > > > > this > > > > > > > > > > > > > feature > > > > > > > > > > > > > > > on. > > > > > > > > > > > > > > > > > The > > > > > > > > > > > > > > > > > > > > risk > > > > > > > > > > > > > > > > > > > > > of > > > > > > > > > > > > > > > > > > > > > > > breaking existing pipelines > > > > (especially > > > > > > > ones > > > > > > > > > that > > > > > > > > > > > > > > involve, > > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > > > > > example, a > > > > > > > > > > > > > > > > > > > > > > > combination of the Flatten and > > Cast > > > > > SMTs) > > > > > > > is > > > > > > > > > > pretty > > > > > > > > > > > > > > high. I > > > > > > > > > > > > > > > > > think > > > > > > > > > > > > > > > > > > > > this > > > > > > > > > > > > > > > > > > > > > > > should be an opt-in feature, at > > > least > > > > > > until > > > > > > > > the > > > > > > > > > > > next > > > > > > > > > > > > > > major > > > > > > > > > > > > > > > > > > release. > > > > > > > > > > > > > > > > > > > > One > > > > > > > > > > > > > > > > > > > > > > way > > > > > > > > > > > > > > > > > > > > > > > we could accomplish this is by > > > > > > introducing > > > > > > > a > > > > > > > > > new > > > > > > > > > > > > > > > > "field.style" > > > > > > > > > > > > > > > > > > > (name > > > > > > > > > > > > > > > > > > > > > > > obviously subject to change) > > > property > > > > > > with > > > > > > > > > values > > > > > > > > > > > of > > > > > > > > > > > > > > > "plain" > > > > > > > > > > > > > > > > > > > > (default) > > > > > > > > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > > > > > "nested". If set to "plain" > then > > > the > > > > > > > current > > > > > > > > > > > > non-nested > > > > > > > > > > > > > > > > > behavior > > > > > > > > > > > > > > > > > > is > > > > > > > > > > > > > > > > > > > > > used, > > > > > > > > > > > > > > > > > > > > > > > and if set to "nested", then > the > > > > > proposed > > > > > > > > > nested > > > > > > > > > > > > > behavior > > > > > > > > > > > > > > > is. > > > > > > > > > > > > > > > > > We > > > > > > > > > > > > > > > > > > > can > > > > > > > > > > > > > > > > > > > > > > > consider updating the default > > value > > > > to > > > > > > > > "nested" > > > > > > > > > > in > > > > > > > > > > > a > > > > > > > > > > > > > > future > > > > > > > > > > > > > > > > > major > > > > > > > > > > > > > > > > > > > > > release > > > > > > > > > > > > > > > > > > > > > > > (or even codify that plan in > this > > > > KIP, > > > > > if > > > > > > > > > there's > > > > > > > > > > > > > enough > > > > > > > > > > > > > > > > > support > > > > > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > > > > > it). > > > > > > > > > > > > > > > > > > > > > > > This would also leave the door > > open > > > > for > > > > > > > > adding > > > > > > > > > > > > > recursive > > > > > > > > > > > > > > > > > support > > > > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > > > SMTs > > > > > > > > > > > > > > > > > > > > > > in > > > > > > > > > > > > > > > > > > > > > > > the future by adding a > permitted > > > > value > > > > > of > > > > > > > > > > > > "recursive". > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 9. One of the linked tickets in > > the > > > > > > > > > "Motivation" > > > > > > > > > > > > > section, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://issues.apache.org/jira/browse/KAFKA-10640, > > > > > > > > > > > > has > > > > > > > > > > > > > > an > > > > > > > > > > > > > > > > open > > > > > > > > > > > > > > > > > > PR > > > > > > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > > > > KIP > > > > > > > > > > > > > > > > > > > > > > > that propose adding recursive > > > support > > > > > to > > > > > > > some > > > > > > > > > > SMTs. > > > > > > > > > > > > > Have > > > > > > > > > > > > > > > you > > > > > > > > > > > > > > > > > > > > considered > > > > > > > > > > > > > > > > > > > > > > > this type of functionality for > > your > > > > > KIP? > > > > > > Or > > > > > > > > is > > > > > > > > > > your > > > > > > > > > > > > aim > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > stick > > > > > > > > > > > > > > > > > > > > solely > > > > > > > > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > > > > > nested field support? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I like the `field.style` > > > configuration > > > > > flag > > > > > > > > > > approach. > > > > > > > > > > > > > > > > > > > > > > Thanks for pointing out the > > > `recursive` > > > > > > > > approach. > > > > > > > > > > > Will > > > > > > > > > > > > > add > > > > > > > > > > > > > > > > > `nested` > > > > > > > > > > > > > > > > > > > at > > > > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > moment, let's check the demand > for > > > > > > > `recursive` > > > > > > > > to > > > > > > > > > > > > > consider > > > > > > > > > > > > > > it > > > > > > > > > > > > > > > > as > > > > > > > > > > > > > > > > > > part > > > > > > > > > > > > > > > > > > > > of > > > > > > > > > > > > > > > > > > > > > > this or another KIP. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have added the following on the > > > KIP: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ``` > > > > > > > > > > > > > > > > > > > > > > Future KIPs could extend this > > support > > > > > for: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - Recursive notation: name a > field > > > and > > > > > > apply > > > > > > > it > > > > > > > > > to > > > > > > > > > > > all > > > > > > > > > > > > > > fields > > > > > > > > > > > > > > > > > > across > > > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > schema matching that name. > > > > > > > > > > > > > > > > > > > > > > - Access to arrays: Adding `[]` > > > > notation > > > > > to > > > > > > > > > > represent > > > > > > > > > > > > > > access > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > > > > arrays > > > > > > > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > > > > applying SMTs to fields within an > > > > array. > > > > > > > > > > > > > > > > > > > > > > ``` > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Feb 8, 2022 at 1:23 PM > > > Jorge > > > > > > > Esteban > > > > > > > > > > > Quilcate > > > > > > > > > > > > > > > Otoya < > > > > > > > > > > > > > > > > > > > > > > > quilcate.jo...@gmail.com> > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Dev team, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'd like to start a new > > > discussion > > > > > > thread > > > > > > > > on > > > > > > > > > > > Kafka > > > > > > > > > > > > > > > Connect > > > > > > > > > > > > > > > > > > > KIP-821: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/KAFKA/KIP-821%3A+Connect+Transforms+support+for+nested+structures > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > This KIP is aimed to include > > > > support > > > > > > for > > > > > > > > > nested > > > > > > > > > > > > > > > structures > > > > > > > > > > > > > > > > on > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > > existing > > > > > > > > > > > > > > > > > > > > > > > > SMTs — where this make sense. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Looking forward to your > > feedback. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > > > > > > > > > > > Jorge. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
